hw/block/nvme updates

* NVMe subsystem support (`-device nvme-subsys`) (Minwoo Im)
* Namespace (De|At)tachment support (Minwoo Im)
* Simple Copy command support (Klaus Jensen)
* Flush broadcast support (Gollu Appalanaidu)
* QEMUIOVector/QEMUSGList duality refactoring (Klaus Jensen)

plus various fixes from Minwoo, Gollu, Dmitry and me.

v2:
  - add `nqn` nvme-subsys device parameter instead of using `id`.
    (Paolo)

# gpg: Signature made Tue 09 Mar 2021 11:44:17 GMT
# gpg:                using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown]
# gpg:                 aka "Klaus Jensen <k.jensen@samsung.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468  4272 63D5 6FC5 E55D A838
#      Subkey fingerprint: 5228 33AA 75E2 DCE6 A247  66C0 4DE1 AF31 6D4F 0DE9

* remotes/nvme/tags/nvme-next-pull-request: (38 commits)
  hw/block/nvme: support Identify NS Attached Controller List
  hw/block/nvme: support changed namespace asynchronous event
  hw/block/nvme: support namespace attachment command
  hw/block/nvme: refactor nvme_select_ns_iocs
  hw/block/nvme: support allocated namespace type
  hw/block/nvme: fix allocated namespace list to 256
  hw/block/nvme: fix namespaces array to 1-based
  hw/block/nvme: support namespace detach
  hw/block/nvme: refactor nvme_dma
  hw/block/nvme: remove the req dependency in map functions
  hw/block/nvme: try to deal with the iov/qsg duality
  hw/block/nvme: fix strerror printing
  hw/block/nvme: remove block accounting for write zeroes
  hw/block/nvme: remove redundant len member in compare context
  hw/block/nvme: report non-mdts command size limit for dsm
  hw/block/nvme: add trace event for zone read check
  hw/block/nvme: fix potential compilation error
  hw/block/nvme: add identify trace event
  hw/block/nvme: remove unnecessary endian conversion
  hw/block/nvme: align zoned.zasl with mdts
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

* Add some missing gitlab-CI job dependencies
* Re-enable "make check SPEED=slow"
* Improve the gitlab-pipeline-status script
* Clean up inclusing of qtest.h headers
* Improve libqos/qgraph documentation
* Fix downloading problem in the acceptance tests
* Remove deprecated target tilegx
* Add new bsd-user maintainers

# gpg: Signature made Tue 09 Mar 2021 10:27:29 GMT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/thuth-gitlab/tags/pull-request-2021-03-09:
  bsd-user: Add new maintainers
  Remove deprecated target tilegx
  Acceptance Tests: restore filtering of tests by target arch
  Acceptance Tests: restore downloading of VM images
  docs/devel/qgraph: improve qgraph documentation
  libqos/qgraph: format qgraph comments for sphinx documentation
  scripts/ci/gitlab-pipeline-status: give more info when pipeline not found
  scripts/ci/gitlab-pipeline-status: give more information on failures
  scripts/ci/gitlab-pipeline-status: split utlity function for HTTP GET
  meson: Re-enable the possibility to run "make check SPEED=slow"
  docker: OpenSBI build job depends on OpenSBI container
  docker: EDK2 build job depends on EDK2 container
  docker: Alpine build job depends on Alpine container
  qtest: delete superfluous inclusions of qtest.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * Add new mps3-an547 board
 * target/arm: Restrict v7A TCG cpus to TCG accel
 * Implement a Xilinx CSU DMA model
 * hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt()

# gpg: Signature made Wed 10 Mar 2021 13:56:20 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210310: (54 commits)
  hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt()
  hw/timer/renesas_tmr: Prefix constants for CSS values with CSS_
  hw/ssi: xilinx_spips: Remove DMA related dead codes from zynqmp_spips
  hw/ssi: xilinx_spips: Clean up coding convention issues
  hw/arm: xlnx-zynqmp: Connect a Xilinx CSU DMA module for QSPI
  hw/arm: xlnx-zynqmp: Clean up coding convention issues
  hw/dma: Implement a Xilinx CSU DMA model
  target/arm: Restrict v7A TCG cpus to TCG accel
  tests/qtest/sse-timer-test: Test counter scaling changes
  tests/qtest/sse-timer-test: Test the system timer
  tests/qtest/sse-timer-test: Add simple test of the SSE counter
  docs/system/arm/mps2.rst: Document the new mps3-an547 board
  hw/arm/mps2-tz: Add new mps3-an547 board
  hw/arm/mps2-tz: Make initsvtor0 setting board-specific
  hw/arm/mps2-tz: Support running APB peripherals on different clock
  hw/misc/mps2-scc: Implement changes for AN547
  hw/misc/mps2-fpgaio: Support AN547 DBGCTRL register
  hw/misc/mps2-fpgaio: Fold counters subsection into main vmstate
  hw/arm/mps2-tz: Make UART overflow IRQ board-specific
  hw/arm/armsse: Add SSE-300 support
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The read_tcnt() function calculates the TCNT register values for the
two channels of the timer module; it sets these up in the local
tcnt[] array, and eventually returns either one or both of them,
depending on whether the access is 8 or 16 bits.  However, not all of
the code paths through this function set both elements of this array:
if the guest has programmed the TCCR.CSS register fields to values
which are either documented as not to be used or which QEMU does not
implement, then the function will return uninitialized data.  (This
was spotted by Coverity.)

Add the missing CSS cases to this code, so that we return a
consistent value instead of uninitialized data, and so the code
structure indicates what's happening.

Fixes: CID 1429976
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210219223241.16344-3-peter.maydell@linaro.org

The #defines INTERNAL and CASCADING represent different possible
values for the TCCR.CSS register field; prefix them with CSS_ to make
this more obvious, before we add more defines to represent the
other possible values of the field in the next commit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210219223241.16344-2-peter.maydell@linaro.org

Now that the Xilinx CSU DMA model is implemented, the existing
DMA related dead codes in the ZynqMP QSPI are useless and should
be removed. The maximum register number is also updated to only
include the QSPI registers.

Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210303135254.3970-6-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

There are some coding convention warnings in xilinx_spips.c,
as reported by:

  $ ./scripts/checkpatch.pl hw/ssi/xilinx_spips.c

Let's clean them up.

Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210303135254.3970-5-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Add a Xilinx CSU DMA module to ZynqMP SoC, and connent the stream
link of GQSPI to CSU DMA.

Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210303135254.3970-4-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

There are some coding convention warnings in xlnx-zynqmp.c and
xlnx-zynqmp.h, as reported by:

  $ ./scripts/checkpatch.pl include/hw/arm/xlnx-zynqmp.h
  $ ./scripts/checkpatch.pl hw/arm/xlnx-zynqmp.c

Let's clean them up.

Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210303135254.3970-3-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Block layer patches:

- qemu-storage-daemon: add --pidfile option
- qemu-storage-daemon: CLI error messages include the option name now
- vhost-user-blk export: Misc fixes
- docs: Improvements for qemu-storage-daemon documentation
- parallels: load bitmap extension
- backup-top: Don't crash on post-finalize accesses
- Improve error messages related to node-name options
- iotests improvements

# gpg: Signature made Mon 08 Mar 2021 17:01:41 GMT
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (30 commits)
  blockdev: Clarify error messages pertaining to 'node-name'
  block: Clarify error messages pertaining to 'node-name'
  docs: qsd: Explain --export nbd,name=... default
  MAINTAINERS: update parallels block driver
  iotests: add parallels-read-bitmap test
  iotests.py: add unarchive_sample_image() helper
  parallels: support bitmap extension for read-only mode
  block/parallels: BDRVParallelsState: add cluster_size field
  parallels.txt: fix bitmap L1 table description
  qcow2-bitmap: make bytes_covered_by_bitmap_cluster() public
  block/export: port virtio-blk read/write range check
  block/export: port virtio-blk discard/write zeroes input validation
  block/export: fix vhost-user-blk export sector number calculation
  block/export: use VIRTIO_BLK_SECTOR_BITS
  block/export: fix blk_size double byteswap
  libqtest: add qtest_remove_abrt_handler()
  libqtest: add qtest_kill_qemu()
  libqtest: add qtest_socket_server()
  vhost-user-blk: fix blkcfg->num_queues endianness
  docs: replace insecure /tmp examples in qsd docs
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qemu-sparc queue

# gpg: Signature made Sun 07 Mar 2021 12:07:13 GMT
# gpg:                using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg:                issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-20210307: (42 commits)
  esp: add support for unaligned accesses
  esp: implement non-DMA transfers in PDMA mode
  esp: add trivial implementation of the ESP_RFLAGS register
  esp: convert cmdbuf from array to Fifo8
  esp: convert ti_buf from array to Fifo8
  esp: transition to message out phase after SATN and stop command
  esp: add maxlen parameter to get_cmd()
  esp: raise interrupt after every non-DMA byte transferred to the FIFO
  esp: remove old deferred command completion mechanism
  esp: defer command completion interrupt on incoming data transfers
  esp: latch individual bits in ESP_RINTR register
  esp: implement FIFO flush command
  esp: add 4 byte PDMA read and write transfers
  esp: remove pdma_origin from ESPState
  esp: use FIFO for PDMA transfers between initiator and device
  esp: fix PDMA target selection
  esp: rename get_cmd_cb() to esp_select()
  esp: remove CMD pdma_origin
  esp: use in-built TC to determine PDMA transfer length
  esp: use ti_wptr/ti_rptr to manage the current FIFO position for PDMA
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Add hexagon to include/exec/poison.h
Two Coverity fixes for target/hexagon/

# gpg: Signature made Sun 07 Mar 2021 01:37:05 GMT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-hex-20210306:
  target/hexagon/opcodes: Add missing varargs cleanup
  target/hexagon: Fix shift amount check in fASHIFTL/fLSHIFTR
  exec: Poison Hexagon target-specific definitions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The FreeBSD project has a number of enhancements to bsd-user. These changes have
evolved over the past 10 year, and aren't currently updated to the latest
version of qemu due to fluxuations in staffing causing us to fall behind in the
past. We're working on porting all the changes forward and contributing all the
changes back to qemu. Add myself as maintainer and Kyle Evans as a reviewer for
changes. In addition, add a pointer to our github repo in the interim while this
work is ongoing.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210308224023.75187-1-imp@bsdimp.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

TILE-Gx was only implemented in linux-user mode, but support for this CPU
was removed from the upstream Linux kernel in 2018, and it has also been
dropped from glibc, so there is no new Linux development taking place with
this architecture. For running the old binaries, users can simply use older
versions of QEMU.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210224183952.80463-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Previously, tests were being filtered by the matching target
architectures to be built.  The benefit, compared to the current
situation, is a more concise test job that won't show tests canceled
because a matching QEMU binary was not found (those tests won't even
be attempted).

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210225232122.1254879-3-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

The "get-vm-images" target defined in tests/Makefile.include is a
prerequisite for "check-acceptance", so that those files get
downloaded before the Avocado job even starts.

It looks like on c401c058 a TARGETS variable was introduced with a
different content than it was previously coming from the main
Makefile.  From that point on, the "get-vm-images" succeed without
doing anything because there was no matching architecture to download.

This restores the download of images (that match targets to be built)
before the job starts, eliminating downloads and their associated
failures during the tests.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210225232122.1254879-2-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Improve current qgraph documentation with a more concrete example
and clearer motivation.

This patch depends on the previous serie
"libqos/qgraph: format qgraph comments for sphinx documentation"

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210301092432.20342-1-eesposit@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Change documentation style and fix minor typos in tests/qtest/libqos/qgraph.h
to automatically generate sphinx documentation in docs/devel/qgraph.rst

The mechanism explanation that once was in qgraph.h is now moved to qgraph.rst

There is no functional change intended.

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210308073240.6363-1-eesposit@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Support Identify command for Namespace attached controller list.  This
command handler will traverse the controller instances in the given
subsystem to figure out whether the specified nsid is attached to the
controllers or not.

The 4096bytes Identify data will return with the first entry (16bits)
indicating the number of the controller id entries.  So, the data can
hold up to 2047 entries for the controller ids.

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
[k.jensen: rebased for dma refactor]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

If namespace inventory is changed due to some reasons (e.g., namespace
attachment/detachment), controller can send out event notifier to the
host to manage namespaces.

This patch sends out the AEN to the host after either attach or detach
namespaces from controllers.  To support clear of the event from the
controller, this patch also implemented Get Log Page command for Changed
Namespace List log type.  To return namespace id list through the
command, when namespace inventory is updated, id is added to the
per-controller list (changed_ns_list).

To indicate the support of this async event, this patch set
OAES(Optional Asynchronous Events Supported) in Identify Controller data
structure.

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

This patch supports Namespace Attachment command for the pre-defined
nvme-ns device nodes.  Of course, attach/detach namespace should only be
supported in case 'subsys' is given.  This is because if we detach a
namespace from a controller, somebody needs to manage the detached, but
allocated namespace in the NVMe subsystem.

As command effect for the namespace attachment command is registered,
the host will be notified that namespace inventory is changed so that
host will rescan the namespace inventory after this command.  For
example, kernel driver manages this command effect via passthru IOCTL.

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
[k.jensen: rebased for dma refactor]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

This patch has no functional changes.  This patch just refactored
nvme_select_ns_iocs() to iterate the attached namespaces of the
controlller and make it invoke __nvme_select_ns_iocs().

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

From NVMe spec 1.4b "6.1.5. NSID and Namespace Relationships" defines
valid namespace types:

	- Unallocated: Not exists in the NVMe subsystem
	- Allocated: Exists in the NVMe subsystem
	- Inactive: Not attached to the controller
	- Active: Attached to the controller

This patch added support for allocated, but not attached namespace type:

	!nvme_ns(n, nsid) && nvme_subsys_ns(n->subsys, nsid)

nvme_ns() returns attached namespace instance of the given controller
and nvme_subsys_ns() returns allocated namespace instance in the
subsystem.

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

Expand allocated namespace list (subsys->namespaces) to have 256 entries
which is a value lager than at least NVME_MAX_NAMESPACES which is for
attached namespace list in a controller.

Allocated namespace list should at least larger than attached namespace
list.

	n->num_namespaces = NVME_MAX_NAMESPACES;

The above line will set the NN field by id->nn so that the subsystem
should also prepare at least this number of namespace list entries.

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

subsys->namespaces array used to be sized to NVME_SUBSYS_MAX_NAMESPACES.
But subsys->namespaces are being accessed with 1-based namespace id
which means the very first array entry will always be empty(NULL).

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

Given that now we have nvme-subsys device supported, we can manage
namespace allocated, but not attached: detached.  This patch introduced
a parameter for nvme-ns device named 'detached'.  This parameter
indicates whether the given namespace device is detached from
a entire NVMe subsystem('subsys' given case, shared namespace) or a
controller('bus' given case, private namespace).

- Allocated namespace

  1) Shared ns in the subsystem 'subsys0':

     -device nvme-ns,id=ns1,drive=blknvme0,nsid=1,subsys=subsys0,detached=true

  2) Private ns for the controller 'nvme0' of the subsystem 'subsys0':

     -device nvme-subsys,id=subsys0
     -device nvme,serial=foo,id=nvme0,subsys=subsys0
     -device nvme-ns,id=ns1,drive=blknvme0,nsid=1,bus=nvme0,detached=true

  3) (Invalid case) Controller 'nvme0' has no subsystem to manage ns:

     -device nvme,serial=foo,id=nvme0
     -device nvme-ns,id=ns1,drive=blknvme0,nsid=1,bus=nvme0,detached=true

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

The nvme_dma function doesn't just do DMA (QEMUSGList-based) memory transfers;
it also handles QEMUIOVector copies.

Introduce the NvmeTxDirection enum and rename to nvme_tx. Remove mapping
of PRPs/SGLs from nvme_tx and instead assert that they have been mapped
previously. This allows more fine-grained use in subsequent patches.

Add new (better named) helpers, nvme_{c2h,h2c}, that does both PRP/SGL
mapping and transfer.

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>

The PRP and SGL mapping functions does not have any particular need for
the entire NvmeRequest as a parameter. Clean it up.

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>

Introduce NvmeSg and try to deal with that pesky qsg/iov duality that
haunts all the memory-related functions.

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>

Fix missing sign inversion.

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>

A Write Zeroes commands should not be counted in either the 'Data Units
Written' or in 'Host Write Commands' SMART/Health Information Log page.

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>

The 'len' member of the nvme_compare_ctx struct is redundant since the
same information is available in the 'iov' member.

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>

Dataset Management is not subject to MDTS, but exceeded a certain size
per range causes internal looping. Report this limit (DMRSL) in the NVM
command set specific identify controller data structure.

Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>

Add a trace event for the offline zone condition when checking zone
read.

Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
[k.jensen: split commit]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

assert may be compiled to a noop and we could end up returning an
uninitialized status.

Fix this by always returning Internal Device Error as a fallback.

Note that, as pointed out by Philippe, per commit 262a69f4 ("osdep.h:
Prohibit disabling assert() in supported builds") this shouldn't be
possible. But clean it up so we don't worry about it again.

Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
[k.jensen: split commit]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

Add a trace event for the Identify command.

Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>

Remove an unnecessary le_to_cpu conversion in Identify.

Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>

ZASL (Zone Append Size Limit) is defined exactly like MDTS (Maximum Data
Transfer Size), that is, it is a value in units of the minimum memory
page size (CAP.MPSMIN) and is reported as a power of two.

The 'mdts' nvme device parameter is specified as in the spec, but the
'zoned.append_size_limit' parameter is specified in bytes. This is
suboptimal for a number of reasons:

  1. It is just plain confusing wrt. the definition of mdts.
  2. There is a lot of complexity involved in validating the value; it
     must be a power of two, it should be larger than 4k, if it is zero
     we set it internally to mdts, but still report it as zero.
  3. While "hw/block/nvme: improve invalid zasl value reporting"
     slightly improved the handling of the parameter, the validation is
     still wrong; it does not depend on CC.MPS, it depends on
     CAP.MPSMIN. And we are not even checking that it is actually less
     than or equal to MDTS, which is kinda the *one* condition it must
     satisfy.

Fix this by defining zasl exactly like mdts and checking the one thing
that it must satisfy (that it is less than or equal to mdts). Also,
change the default value from 128KiB to 0 (aka, whatever mdts is).

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>

If mdts is exceeded, trace it from a single place.

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>

Document the 'mdts' nvme device parameter.

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>