uri_free() checks if its argument is NULL in uri_clean() and g_free().
There is no need to check the argument before the call.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Message-Id: <20210629063602.4239-1-xypron.glpk@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

librbd supports 1 byte alignment for all aio operations.

Currently, there is no API call to query limits from the Ceph
ObjectStore backend.  So drop the bdrv_refresh_limits completely
until there is such an API call.

Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-7-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

This patch wittingly sets BDRV_REQ_NO_FALLBACK and silently ignores
BDRV_REQ_MAY_UNMAP for older librbd versions.

The rationale for this is as follows (citing Ilya Dryomov current RBD
maintainer):

---8<---
a) remove the BDRV_REQ_MAY_UNMAP check in qemu_rbd_co_pwrite_zeroes()
   and as a consequence always unmap if librbd is too old

   It's not clear what qemu's expectation is but in general Write
   Zeroes is allowed to unmap.  The only guarantee is that subsequent
   reads return zeroes, everything else is a hint.  This is how it is
   specified in the kernel and in the NVMe spec.

   In particular, block/nvme.c implements it as follows:

   if (flags & BDRV_REQ_MAY_UNMAP) {
       cdw12 |= (1 << 25);
   }

   This sets the Deallocate bit.  But if it's not set, the device may
   still deallocate:

   """
   If the Deallocate bit (CDW12.DEAC) is set to '1' in a Write Zeroes
   command, and the namespace supports clearing all bytes to 0h in the
   values read (e.g., bits 2:0 in the DLFEAT field are set to 001b)
   from a deallocated logical block and its metadata (excluding
   protection information), then for each specified logical block, the
   controller:
   - should deallocate that logical block;

   ...

   If the Deallocate bit is cleared to '0' in a Write Zeroes command,
   and the namespace supports clearing all bytes to 0h in the values
   read (e.g., bits 2:0 in the DLFEAT field are set to 001b) from
   a deallocated logical block and its metadata (excluding protection
   information), then, for each specified logical block, the
   controller:
   - may deallocate that logical block;
   """

   https://nvmexpress.org/wp-content/uploads/NVM-Express-NVM-Command-Set-Specification-2021.06.02-Ratified-1.pdf



b) set BDRV_REQ_NO_FALLBACK in supported_zero_flags

   Again, it's not clear what qemu expects here, but without it we end
   up in a ridiculous situation where specifying the "don't allow slow
   fallback" switch immediately fails all efficient zeroing requests on
   a device where Write Zeroes is always efficient:

   $ qemu-io -c 'help write' | grep -- '-[zun]'
    -n, -- with -z, don't allow slow fallback
    -u, -- with -z, allow unmapping
    -z, -- write zeroes using blk_co_pwrite_zeroes

   $ qemu-io -f rbd -c 'write -z -u -n 0 1M' rbd:foo/bar
   write failed: Operation not supported
--->8---

Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-6-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-5-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

While at it just call rbd_get_size and avoid rbd_image_info_t.

Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-4-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-3-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Ceph Luminous (version 12.2.z) is almost 4 years old at this point.
Bump the requirement to get rid of the ifdef'ry in the code.
Qemu 6.1 dropped the support for RHEL-7 which was the last supported
OS that required an older librbd.

Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-2-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Starting from ceph Pacific, RBD has built-in support for image-level encryption.
Currently supported formats are LUKS version 1 and 2.

There are 2 new relevant librbd APIs for controlling encryption, both expect an
open image context:

rbd_encryption_format: formats an image (i.e. writes the LUKS header)
rbd_encryption_load: loads encryptor/decryptor to the image IO stack

This commit extends the qemu rbd driver API to support the above.

Signed-off-by: Or Ozeri <oro@il.ibm.com>
Message-Id: <20210627114635.39326-1-oro@il.ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Jason has moved on from working on RBD and Ceph.  I'm taking over
his role upstream.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210519112513.19694-1-idryomov@gmail.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

linux-user pull request 20210708

Code and style cleanup
Add ppid in self/stat
ELF_HWCAP for RISC-V

# gpg: Signature made Thu 08 Jul 2021 11:07:31 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-6.1-pull-request:
  linux-user/syscall: Remove hardcoded tabs (code style)
  linux-user/alpha: Remove hardcoded tabs (code style)
  linux-user/mips: Handle TARGET_EWOULDBLOCK as TARGET_EAGAIN
  linux-user/hppa: Handle TARGET_EWOULDBLOCK as TARGET_EAGAIN
  linux-user/alpha: Handle TARGET_EWOULDBLOCK as TARGET_EAGAIN
  linux-user: Fix style problems in linuxload.c
  linux-user: fill ppid field in /proc/self/stat
  linux-user/elfload: Implement ELF_HWCAP for RISC-V

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

It turns out you push down in one place and failures pop-up elsewhere.
Especially on CI. Disable for now for all targets.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

We are going to move this code, fix its style first.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210704183755.655002-12-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

We are going to move this code, fix its style first.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-7-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210706234932.356913-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvmwnqnef5g.fsf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Set I, M, A, F, D and C bit for hwcap if misa is set.

Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210706035015.122899-1-kito.cheng@sifive.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

* More Meson test conversions and configure cleanups
* Generalize XSAVE area offset so that it matches AMD processors on KVM
* Improvements for -display and deprecation of -no-quit
* Enable SMP configuration as a compound machine property ("-M smp.cpus=...")
* Haiku compilation fix
* Add icon on Darwin

# gpg: Signature made Tue 06 Jul 2021 08:35:23 BST
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (40 commits)
  config-host.mak: remove unused compiler-related lines
  Set icon for QEMU binary on Mac OS
  qemu-option: remove now-dead code
  machine: add smp compound property
  vl: switch -M parsing to keyval
  keyval: introduce keyval_parse_into
  keyval: introduce keyval_merge
  qom: export more functions for use with non-UserCreatable objects
  configure: convert compiler tests to meson, part 6
  configure: convert compiler tests to meson, part 5
  configure: convert compiler tests to meson, part 4
  configure: convert compiler tests to meson, part 3
  configure: convert compiler tests to meson, part 2
  configure: convert compiler tests to meson, part 1
  configure: convert HAVE_BROKEN_SIZE_MAX to meson
  configure, meson: move CONFIG_IVSHMEM to meson
  meson: store dependency('threads') in a variable
  meson: sort existing compiler tests
  configure, meson: convert libxml2 detection to meson
  configure, meson: convert liburing detection to meson
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Most of the build is not done via Makefiles, therefore the toolchain
variables are mostly unused.  They are still used by tests/tcg
and pc-bios/roms, but most of them are not needed there.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Before switching the build system over to Meson, an icon was
added to the QEMU binary on Mac OS. This patch adds back that
feature; it piggybacks on the existing scripts/entitlement.sh,
which already does in-place changes to the executable on Darwin.

Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-Id: <20210705195328.36442-1-programmingkidx@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

-M was the sole user of qemu_opts_set and qemu_opts_set_defaults,
remove them and the arguments that they used.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Make -smp syntactic sugar for a compound property "-machine
smp.{cores,threads,cpu,...}".  machine_smp_parse is replaced by the
setter for the property.

numa-test will now cover the new syntax, while other tests
still use -smp.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Switch from QemuOpts to keyval.  This enables the introduction
of non-scalar machine properties, and JSON syntax in the future.

For JSON syntax to be supported right now, we would have to
consider what would happen if string-based dictionaries (produced by
-M key=val) were to be merged with strongly-typed dictionaries
(produced by -M {'key': 123}).

The simplest way out is to never enter the situation, and only allow one
-M option when JSON syntax is in use.  However, we want options such as
-smp to become syntactic sugar for -M, and this is a problem; as soon
as -smp becomes a shortcut for -M, QEMU would forbid using -M '{....}'
together with -smp.  Therefore, allowing JSON syntax right now for -M
would be a forward-compatibility nightmare and it would be impossible
anyway to introduce -M incrementally in tools.

Instead, support for JSON syntax is delayed until after the main
options are converted to QOM compound properties.  These include -boot,
-acpitable, -smbios, -m, -semihosting-config, -rtc and -fw_cfg.  Once JSON
syntax is introduced, these options will _also_ be forbidden together
with -M '{...}'.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Allow parsing multiple keyval sequences into the same dictionary.
This will be used to simplify the parsing of the -M command line
option, which is currently a .merge_lists = true QemuOpts group.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This patch introduces a function that merges two keyval-produced
(or keyval-like) QDicts.  It can be used to emulate the behavior of
.merge_lists = true QemuOpts groups, merging -readconfig sections and
command-line options in a single QDict, and also to implement -set.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Machines and accelerators are not user-creatable but they are going
to share similar command-line parsing machinery.  Export functions
that will be used with -machine and -accel in softmmu/vl.c.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

And remove them from the summary, since now their outcome is verbosely
included in the meson output.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This is a duplicate of CONFIG_EVENTFD, handle it directly in meson.build.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

It can be useful for has_function checks.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The next patches will add more compiler tests.  Sort and group the
existing tests, keeping similar cc.has_* tests together and sorting them
alphabetically by macro name.  This should make it easier to look for
examples when adding new tests to meson.build.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>