Commits · a0441b66e811f24d92238e9a34f9d46b3a9058fa · Anton / libtcg

Oct 27, 2020

qemu-img: add support for rate limit in qemu-img commit · a0441b66

Zhengui Li authored 4 years ago


add support for rate limit in qemu-img commit.

Signed-off-by: Zhengui <lizhengui@huawei.com>
Message-Id: <1603205264-17424-2-git-send-email-lizhengui@huawei.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

a0441b66

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20201026a' into staging · d55450df

Peter Maydell authored 4 years ago


migration pull: 2020-10-26

Another go at Peter's postcopy fixes

Cleanups from Bihong Yu and Peter Maydell.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

# gpg: Signature made Mon 26 Oct 2020 16:17:03 GMT
# gpg:                using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20201026a:
  migration-test: Only hide error if !QTEST_LOG
  migration/postcopy: Release fd before going into 'postcopy-pause'
  migration: Sync requested pages after postcopy recovery
  migration: Maintain postcopy faulted addresses
  migration: Introduce migrate_send_rp_message_req_pages()
  migration: Pass incoming state into qemu_ufd_copy_ioctl()
  migration: using trace_ to replace DPRINTF
  migration: Delete redundant spaces
  migration: Open brace '{' following function declarations go on the next line
  migration: Do not initialise statics and globals to 0 or NULL
  migration: Add braces {} for if statement
  migration: Open brace '{' following struct go on the same line
  migration: Add spaces around operator
  migration: Don't use '#' flag of printf format
  migration: Do not use C99 // comments
  migration: Drop unused VMSTATE_FLOAT64 support

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

d55450df

Oct 26, 2020

Merge remote-tracking branch 'remotes/ericb/tags/pull-bitmaps-2020-10-26' into staging · 091e3e3d

Peter Maydell authored 4 years ago


bitmaps patches for 2020-10-26

- fix infloop on large bitmap granularity
- silence compiler warning

# gpg: Signature made Mon 26 Oct 2020 11:56:54 GMT
# gpg:                using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg:                 aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-bitmaps-2020-10-26:
  migration/block-dirty-bitmap: fix uninitialized variable warning
  migration/block-dirty-bitmap: fix larger granularity bitmaps

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

091e3e3d

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/sd-next-20201026' into staging · 1dc88732

Peter Maydell authored 4 years ago

SD/MMC patches

- Fix a bug in CMD6/SWITCH_FUNCTION (Bin Meng)
- Minor housekeeping patches

CI jobs result:
. https://cirrus-ci.com/build/5461987880599552
. https://gitlab.com/philmd/qemu/-/pipelines/207532287
. https://travis-ci.org/github/philmd/qemu/builds/738901111
. https://app.shippable.com/github/philmd/qemu/runs/888/summary/console



# gpg: Signature made Mon 26 Oct 2020 11:02:22 GMT
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/sd-next-20201026:
  hw/sd/sdcard: Zero out function selection fields before being populated
  hw/sd/sdcard: Make iolen unsigned
  hw/sd/sdcard: Constify sd_crc*()'s message argument
  hw/sd/sdcard: Simplify cmd_valid_while_locked()
  hw/sd/sdcard: Update the SDState documentation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1dc88732

migration-test: Only hide error if !QTEST_LOG · a4729501

Peter Xu authored 4 years ago

The errors are very useful when debugging qtest failures, especially when
QTEST_LOG=1 is set. Let's allow override MigrateStart.hide_stderr when
QTEST_LOG=1 is specified, because that means the user wants to be verbose.

Not very nice to introduce the first QTEST_LOG env access in migration-test.c,
however it should be handy. Without this patch, I was hacking error_report()
when debugging such errors. Let's make things easier.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-7-peterx@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

a4729501

migration/postcopy: Release fd before going into 'postcopy-pause' · d246ea50

Peter Xu authored 4 years ago


Logically below race could trigger with the old code:

          test program                        migration thread
          ------------                        ----------------
       wait_until('postcopy-pause')
                                          postcopy_pause()
                                            set_state('postcopy-pause')
       do_postcopy_recover()
         arm s->to_dst_file with new fd
                                            release s->to_dst_file [1]

Here [1] could have released the just-installed recoverying channel.  Then the
migration could hang without really resuming.

Instead, it should be very safe to release the fd before setting the state into
'postcopy-pause', because there's no reason for any other thread to touch it
during 'postcopy-active'.

Dave reported a very rare postcopy recovery hang that the migration-test
program waited for the migration to complete in migrate_postcopy_complete().
We do suspect it's the same thing that we're gonna fix here.  Hard to tell.
However since we've noticed this, fix this irrelevant of the hang report.

Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-6-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

d246ea50

migration: Sync requested pages after postcopy recovery · 0c26781c

Peter Xu authored 4 years ago


We synchronize the requested pages right after a postcopy recovery happens.
This helps to synchronize the prioritized pages on source so that the faulted
threads can be served faster.

Reported-by: Xiaohui Li <xiaohli@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-5-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

0c26781c

migration: Maintain postcopy faulted addresses · 8f8bfffc

Peter Xu authored 4 years ago


Maintain a list of faulted addresses on the destination host for which we're
waiting on.  This is implemented using a GTree rather than a real list to make
sure even there're plenty of vCPUs/threads that are faulting, the lookup will
still be fast with O(log(N)) (because we'll do that after placing each page).
It should bring a slight overhead, but ideally that shouldn't be a big problem
simply because in most cases the requested page list will be short.

Actually we did similar things for postcopy blocktime measurements.  This patch
didn't use that simply because:

  (1) blocktime measurement is towards vcpu threads only, but here we need to
      record all faulted addresses, including main thread and external
      thread (like, DPDK via vhost-user).

  (2) blocktime measurement will require UFFD_FEATURE_THREAD_ID, but here we
      don't want to add that extra dependency on the kernel version since not
      necessary.  E.g., we don't need to know which thread faulted on which
      page, we also don't care about multiple threads faulting on the same
      page.  But we only care about what addresses are faulted so waiting for a
      page copying from src.

  (3) blocktime measurement is not enabled by default.  However we need this by
      default especially for postcopy recover.

Another thing to mention is that this patch introduced a new mutex to serialize
the receivedmap and the page_requested tree, however that serialization does
not cover other procedures like UFFDIO_COPY.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-4-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

8f8bfffc

migration: Introduce migrate_send_rp_message_req_pages() · 7a267fc4

Peter Xu authored 4 years ago


This is another layer wrapper for sending a page request to the source VM.  The
new migrate_send_rp_message_req_pages() will be used elsewhere in coming
patches.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

7a267fc4

migration: Pass incoming state into qemu_ufd_copy_ioctl() · eef621c4

Peter Xu authored 4 years ago


It'll be used in follow up patches to access more fields out of it.  Meanwhile
fetch the userfaultfd inside the function.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

eef621c4

migration: using trace_ to replace DPRINTF · fe80c024