Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.

Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

We're about to move this out of tcg.h, so rename it
as we did when moving MemOp.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We have lacked expressive support for memory sizes larger
than 64-bits for a while.  Fixing that requires adjustment
to several points where we used this for array indexing,
and two places that develop -Wswitch warnings after the change.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Since 6eea0434, all tcg backends support goto_ptr.
Remove the conditional, making support mandatory.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

The memory bswap support in the aarch64 backend merely dates from
a time when it was required.  There is nothing special about the
backend support that could not have been provided by the middle-end
even prior to the introduction of the bswap flags.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Pass in the input and output size.  We currently use 3 of the 5
possible combinations; the others may be used by new tcg opcodes.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Remove the ifdef ladder and move each define into the
appropriate header file.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Change the return value to bool, because that's what is should
have been from the start.  Pass the ct mask instead of the whole
TCGArgConstraint, as that's the only part that's relevant.

Change the value argument to int64_t.  We will need the extra
width for 32-bit hosts wanting to match vector constants.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

The last argument of tcg_out_extr() must be in the range 0-31 if ext==0.
Before the fix, when m==0 it becomes 32 and it crashes with an Illegal
instruction on Apple Silicon.  After the fix, it will be 0.  If m is in
the range 1-31, it is the same as before.

Signed-off-by: Yasuo Kuwahara <kwhr00@gmail.com>
Message-Id: <CAHfJ0vSXnmnTLmT0kR=a8ACRdw_UsLYOhStzUzgVEHoH8U-7sA@mail.gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

There are two different versions of prototype for tcg_out_op and
tcg_out_vec_op functions:

1) using const TCGArg *args and const int *const_args arguments
2) using const TCGArg args[TCG_MAX_OP_ARGS] and const int
   const_args[TCG_MAX_OP_ARGS] aguments.

This duality causes warnings on GCC 11 and prevents build using
--enable-werror.  As second version provides more information,
unify functions prototypes to this variant.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-Id: <20210312121418.139093-1-mrezanin@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

For some vector operations, "1D" is not a valid type, and there
are separate instructions for the 64-bit scalar operation.

Tested-by: Stefan Weil <sw@weilnetz.de>
Buglink: https://bugs.launchpad.net/qemu/+bug/1916112


Fixes: 14e4c1e2 ("tcg/aarch64: Add vector operations")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Fix a typo in the encodeing of the cmle (zero) instruction.

Fixes: 14e4c1e2 ("tcg/aarch64: Add vector operations")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

An hppa guest executing

0x000000000000e05c:  ldil L%10000,r4
0x000000000000e060:  ldo 0(r4),r4
0x000000000000e064:  sub r3,r4,sp

produces

 ---- 000000000000e064 000000000000e068
 sub2_i32 tmp0,tmp4,r3,$0x1,$0x10000,$0x0

after folding and constant propagation.  Then we hit

tcg-target.c.inc:640: tcg_out_insn_3401: Assertion `aimm <= 0xfff' failed.

because aimm is in fact -16, but unsigned.

The ((bl < 0) ^ sub) condition which negates bl is incorrect and will
always lead to this abort.  If the constant is positive, sub will make
it negative; if the constant is negative, sub will keep it negative.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Fixes INDEX_op_rotli_vec for aarch64 host, where the 3rd
argument is an integer, not a temporary, which now tickles
an assert added in e89b28a6.

Previously, the value computed into v2 would be garbage for
rotli_vec, but as the value was unused it caused no harm.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

All backends have now been converted to tcg-target-con-set.h,
so we can remove the fallback code.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

All backends have now been converted to tcg-target-con-str.h,
so we can remove the fallback code.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Improve rotrv_vec to reduce "t1 = -v2, t2 = t1 + c" to
"t1 = -v2, t2 = c - v2".  This avoids a serial dependency
between t1 and t2.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

These are now completely covered by mov from a
TYPE_CONST temporary.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

While we don't store more than tcg_target_long in TCGTemp,
we shouldn't be limited to that for code generation.  We will
be able to use this for INDEX_op_dup2_vec with 2 constants.

Also pass along the minimal vece that may be said to apply
to the constant.  This allows some simplification in the
various backends.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Having dupi pass though movi is confusing and arguably wrong.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Now that all native tcg hosts support splitwx,
make this pointer const.

Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Now that all native tcg hosts support splitwx,
make this pointer const.

Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Now that all native tcg hosts support splitwx, remove the define.
Replace the one use with a test for CONFIG_TCG_INTERPRETER.

Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

A typo generated a branch-and-link insn instead of plain branch.

Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Plumb the value through to alloc_code_gen_buffer.  This is not
supported by any os or tcg backend, so for now enabling it will
result in an error.

Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Pass both rx and rw addresses to tb_target_set_jmp_target.

Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We must change all targets at once, since all must match
the declaration in tcg.c.

Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We must change all targets at once, since all must match
the declaration in tcg.c.

Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Change TCGLabel.u.value_ptr to const, and initialize it with
tcg_splitwx_to_rx.  Propagate const through tcg/host/ only
as far as needed to avoid errors from the value_ptr change.

Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

This value is constant across all thread-local copies of TCGContext,
so we might as well move it out of thread-local storage.

Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We are shortly going to have a split rw/rx jit buffer.  Depending
on the host, we need to flush the dcache at the rw data pointer and
flush the icache at the rx code pointer.

For now, the two passed pointers are identical, so there is no
effective change in behaviour.

Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Enable this on i386 to restrict the set of input registers
for an 8-bit store, as required by the architecture.  This
removes the last use of scratch registers for user-only mode.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

This has been a tcg-specific function, but is also in use
by hardware accelerators via physmem.c.  This can cause
link errors when tcg is disabled.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201214140314.18544-3-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The cmp_vec opcode is mandatory; this symbol is unused.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

This wasn't actually used for anything, really.  All variable
operands must accept registers, and which are indicated by the
set in TCGArgConstraint.regs.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

The union is unused; let "regs" appear in the main structure
without the "u.regs" wrapping.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>