Add utility functions qemu_clock_get_ms and qemu_clock_get_us

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Remove qemu_clock_deadline and qemu_timerlist_deadline now we are using
the ns functions throughout.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Remove alarm timers from qemu-timers.c now we use g_poll / ppoll
instead.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Add documentation for existing qemu timer calls. Add new format
calls of the format timer_XXX rather than qemu_XXX_timer
for consistency.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Notify all timerlists derived from vm_clock in icount warp
calculations.

When calculating timer delay based on vm_clock deadline, use
all timerlists.

For compatibility, maintain an apparent bug where when using
icount, if no vm_clock timer was set, qemu_clock_deadline
would return INT32_MAX and always set an icount clock expiry
about 2 seconds ahead.

NB: thread safety - when different timerlists sit on different
threads, this will need some locking.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Introduce new API for creating timers - timer_new and
_ns, _ms, _us derivatives.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

On qemu_mod_timer_ns, ensure qemu_notify or aio_notify is called to
end the appropriate poll(), irrespective of use_icount value.

On qemu_clock_enable, ensure qemu_notify or aio_notify is called for
all QEMUTimerLists attached to the QEMUClock.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Convert mainloop to use timeout from default timerlist group
(i.e. the current 3 static timers)

main-loop.c produces a (possibly spurious) warning about
multiple iterations. Adapt the way this works for a signed
timeout and make the warning a bit safer.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Convert aio_poll to use deadline based on AioContext's timers.

aio_poll has been changed to return accurately whether progress
has occurred. Prior to this commit, aio_poll always returned
true if g_poll was entered, whether or not any progress was
made. This required a change to tests/test-aio.c where an
assert was backwards.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Add aio_timer_init and aio_timer_new wrapper functions.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Calculate the timeout in aio_ctx_prepare taking into account
the timers attached to the AioContext.

Alter aio_ctx_check similarly.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Add a notify pointer to QEMUTimerList so it knows what to notify
on a timer change.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Add a QEMUTimerListGroup each AioContext (meaning a QEMUTimerList
associated with each clock is added) and delete it when the
AioContext is freed.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Add QEMUTimerListGroup and helper functions, to represent
a QEMUTimerList associated with each clock. Add a default
QEMUTimerListGroup representing the default timer lists
which are not associated with any other object (e.g.
an AioContext as added by future patches).

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

include/qemu/timer.h has no need to include main-loop.h and
doing so causes an issue for the next patch. Unfortunately
various files assume including timers.h will pull in main-loop.h.
Untangle this mess.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Split QEMUClock into QEMUClock and QEMUTimerList so that we can
have more than one QEMUTimerList associated with the same clock.

Introduce a main_loop_timerlist concept and make existing
qemu_clock_* calls that actually should operate on a QEMUTimerList
call the relevant QEMUTimerList implementations, using the clock's
default timerlist. This vastly reduces the invasiveness of this
change and means the API stays constant for existing users.

Introduce a list of QEMUTimerLists associated with each clock
so that reenabling the clock can cause all the notifiers
to be called. Note the code to do the notifications is added
in a later patch.

Switch QEMUClockType to an enum. Remove global variables vm_clock,
host_clock and rt_clock and add compatibility defines. Do not
fix qemu_next_alarm_deadline as it's going to be deleted.

Add qemu_clock_use_for_deadline to indicate whether a particular
clock should be used for deadline calculations. When use_icount
is true, vm_clock should not be used for deadline calculations
as it does not contain a nanosecond count. Instead, icount
timeouts come from the execution thread doing aio_notify or
qemu_notify as appropriate. This function is used in the next
patch.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Make qemu_run_timers and qemu_run_all_timers return progress
so that aio_poll etc. can determine whether a timer has been
run.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Where supported, called prctl(PR_SET_TIMERSLACK, 1, ...) to
set one nanosecond timer slack to increase precision of timer
calls.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Add qemu_poll_ns which works like g_poll but takes a nanosecond
timeout.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Make treatment of disabled clocks consistent in deadline calculation

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Add utility functions to qemu-timer.c for nanosecond timing.

Add qemu_clock_deadline_ns to calculate deadlines to
nanosecond accuracy.

Add utility function qemu_soonest_timeout to calculate soonest deadline.

Add qemu_timeout_ns_to_ms to convert a timeout in nanoseconds back to
milliseconds for when ppoll is not used.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Rename qemu_new_clock to qemu_clock_new.

Expose clock types.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Rename four functions in preparation for new API.

Rename qemu_timer_expired to timer_expired
Rename qemu_timer_expire_time_ns to timer_expire_time_ns
Rename qemu_timer_pending to timer_pending
Rename qemu_timer_expired_ns to timer_expired_ns

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

VMware ESX hosts also use different create and extent types for flat
files, respectively "vmfs" and "VMFS".  This is not documented, but it
can be found at http://kb.vmware.com/kb/10002511

 (Recreating a missing
virtual machine disk (VMDK) descriptor file).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

VMware ESX hosts use a variant of the VMDK3 format, identified by the
vmfsSparse create type ad the VMFSSPARSE extent type.

It has 16 KB grain tables (L2) and a variable-size grain directory (L1).
In addition, the grain size is always 512, but that is not a problem
because it is included in the header.

The format of the extents is documented in the VMDK spec.  The format
of the descriptor file is not documented precisely, but it can be
found at http://kb.vmware.com/kb/10026353

 (Recreating a missing virtual
machine disk (VMDK) descriptor file for delta disks).

With these patches, vmfsSparse files only work if opened through the
descriptor file.  Data files without descriptor files, as far as I
could understand, are not supported by ESX.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>

--
v2: Rebase to patch 01.
    Change le64_to_cpu to le32_to_cpu.
    Rename vmdk_open_vmdk3 to vmdk_open_vmfs_sparse, which represents the
    current usage of this format.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

VMDK3 header has the field l1dir_size, but vmdk_open_vmdk3 hardcoded the
value. This patch honors the header field.

And the L2 table size is 4096 according to VMDK spec[1], instead of
1 << 9 (512).

[1]:
http://www.vmware.com/support/developer/vddk/vmdk_50_technote.pdf?src=vmdk



Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

This header check is common to VMDK3 and VMDK4, so move it into
vmdk_add_extent().

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

When user tries to use read-only whitelist format in the command line
option, failure message was "'foo' invalid format". It might be invalid
only for writable, but valid for read-only, so it is confusing. Give the
user easier to understand information.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

While Asias is debugging an issue creating qcow2 images on top of
non-file protocols.  It boils down to this example using NBD:

$ qemu-io -c 'open -g nbd+unix:///?socket=/tmp/nbd.sock' -c 'read -v 0 512'

Notice the open -g option to set bs->growable.  This means you can
read/write beyond end of file.  Reading beyond end of file is supposed
to produce zeroes.

We rely on this behavior in qcow2_create2() during qcow2 image
creation.  We create a new file and then write the qcow2 header
structure using bdrv_pwrite().  Since QCowHeader is not a multiple of
sector size, block.c first uses bdrv_read() on the empty file to fetch
the first sector (should be all zeroes).

Here is the output from the qemu-io NBD example above:

$ qemu-io -c 'open -g nbd+unix:///?socket=/tmp/nbd.sock

' -c 'read -v 0 512'
00000000:  ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab  ................
00000010:  ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab  ................
00000020:  ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab  ................
...

We are not zeroing the buffer!  As a result qcow2 image creation on top
of protocols is not guaranteed to work even when file creation is
supported by the protocol.

[Adapted this patch to use bs->zero_beyond_eof.
-- Stefan]

Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

In 4146b46c42e0989cb5842e04d88ab6ccb1713a48 (block: Produce zeros when
protocols reading beyond end of file), we break qemu-iotests ./check
-qcow2 022. This happens because qcow2 temporarily sets ->growable = 1
for vmstate accesses (which are stored beyond the end of regular image
data).

We introduce the bs->zero_beyond_eof to allow qcow2_load_vmstate() to
disable ->zero_beyond_eof temporarily in addition to enable ->growable.

[Since the broken patch "block: Produce zeros when protocols reading
beyond end of file" has not been merged yet, I have applied this fix
*first* and will then apply the next patch to keep the tree bisectable.
-- Stefan]

Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

By the time that qemu 1.7 will be released, enough time will have passed
since qemu 1.1, which is the first version to understand version 3
images, that changing the default shouldn't hurt many people any more
and the benefits of using the new format outweigh the pain.

qemu-iotests already runs with compat=1.1 by default.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

target-arm queue

# gpg: Signature made Tue 20 Aug 2013 08:56:28 AM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found

# By Peter Maydell (20) and Peter Chubb (1)
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20130820: (21 commits)
  hw/timer/imx_epit: Simplify and fix imx_epit implementation
  default-configs: Fix A9MP and A15MP config names
  hw/cpu/a15mpcore: Wire generic timer outputs to GIC inputs
  target-arm: Implement the generic timer
  target-arm: Support coprocessor registers which do I/O
  target-arm: Allow raw_read() and raw_write() to handle 64 bit regs
  hw/arm/pic_cpu: Remove the now-unneeded arm_pic_init_cpu()
  hw/arm/xilinx_zynq: Don't use arm_pic_init_cpu()
  hw/arm/vexpress: Don't use arm_pic_init_cpu()
  hw/arm/versatilepb: Don't use arm_pic_init_cpu()
  hw/arm/strongarm: Don't use arm_pic_init_cpu()
  hw/arm/realview: Don't use arm_pic_init_cpu()
  hw/arm/omap*: Don't use arm_pic_init_cpu()
  hw/arm/musicpal: Don't use arm_pic_init_cpu()
  hw/arm/kzm: Don't use arm_pic_init_cpu()
  hw/arm/integratorcp: Don't use arm_pic_init_cpu()
  hw/arm/highbank: Don't use arm_pic_init_cpu()
  hw/arm/exynos4210: Don't use arm_pic_init_cpu()
  hw/arm/armv7m: Don't use arm_pic_init_cpu()
  target-arm: Make IRQ and FIQ gpio lines on the CPU object
  ...

Message-id: 1377007680-4934-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>

# By Stefan Hajnoczi
# Via Stefan Hajnoczi
* stefanha/block-next:
  aio: drop io_flush argument
  tests: drop event_active_cb()
  thread-pool: drop thread_pool_active()
  dataplane/virtio-blk: drop flush_true() and flush_io()
  block/ssh: drop return_true()
  block/sheepdog: drop have_co_req() and aio_flush_request()
  block/rbd: drop qemu_rbd_aio_flush_cb()
  block/nbd: drop nbd_have_request()
  block/linux-aio: drop qemu_laio_completion_cb()
  block/iscsi: drop iscsi_process_flush()
  block/gluster: drop qemu_gluster_aio_flush_cb()
  block/curl: drop curl_aio_flush()
  aio: stop using .io_flush()
  tests: adjust test-thread-pool to new aio_poll() semantics
  tests: adjust test-aio to new aio_poll() semantics
  dataplane/virtio-blk: check exit conditions before aio_poll()
  block: stop relying on io_flush() in bdrv_drain_all()
  block: ensure bdrv_drain_all() works during bdrv_delete()

Message-id: 1376921877-9576-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>

# By Richard Henderson
# Via Richard Henderson
* rth/axp-next:
  target-alpha: Implement the typhoon iommu
  target-alpha: Consider the superpage when threading and ending TBs
  target-alpha: Use goto_tb in call_pal
  target-alpha: Implement call_pal without an exception

Message-id: 1376720412-2165-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>

QOM CPUState refactorings / X86CPU

* gdbstub coprocessor register count bugfix
* QOM instance_post_init infrastructure to override dynamic properties
* X86CPU HyperV preparations for CPU subclasses

# gpg: Signature made Fri 16 Aug 2013 11:49:02 AM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Eduardo Habkost (3) and others
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony:
  cpus: Use cpu_is_stopped() efficiently
  target-i386: Move hyperv_* static globals to X86CPU
  qdev: Set globals in instance_post_init function
  qom: Introduce instance_post_init hook
  tests: Unit tests for qdev global properties handling
  gdbstub: Fix gdb_register_coprocessor() register counting

When imx_epit.c was last refactored, a common usecase (comparison
register zero) broke.  This patch fixes that, and simplifies the code
yet more.  It also fixes a major thinko in the reset path --- the
wrong bits in the control register were being cleared.

Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Reviewed-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

When individual CONFIG_ switches for the A9MPcore and A15MPcore
devices were created, they were inadvertently given incorrect names
(CONFIG_ARM9MPCORE and CONFIG_ARM15MPCORE). These CPUs are
"Cortex-A9MP" and "Cortex-A15MP", and in particular the ARM9 is
a different (rather older) CPU than the Cortex-A9. Rename the
CONFIG_ switches to bring them into line with the source file
names and CPU names.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1376056215-26391-1-git-send-email-peter.maydell@linaro.org

Now our A15 CPU implements the generic timers, we can wire them
up to the appropriate inputs on the GIC.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1376065080-26661-5-git-send-email-peter.maydell@linaro.org

The ARMv7 architecture specifies a 'generic timer' which is implemented
via cp15 registers. Newer kernels will prefer to use this rather than
a devboard-level timer. Implement the generic timer for TCG; for KVM
we will already use the hardware's virtualized timer for this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1376065080-26661-4-git-send-email-peter.maydell@linaro.org

Add an ARM_CP_IO flag which an ARMCPRegInfo definition can use to
indicate that the register's implementation does I/O and thus
its accesses need to be surrounded by gen_io_start()/gen_io_end()
in order for icount to work. Most notably, cp registers which
implement clocks or timers need this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1376065080-26661-3-git-send-email-peter.maydell@linaro.org