The disassembly via capstone should be superiour to our old vixl
sources nowadays, so let's finally cut this old disassembler out
of the QEMU source tree.

Message-Id: <20220603164249.112459-1-thuth@redhat.com>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

The different migration test cases are using a variety of settings
to ensure convergance/non-convergance. Introduce two helpers to
extra the common functionality and ensure consistency.

  * Non-convergance: 1ms downtime, 30mbs bandwidth
  * Convergance: 30s downtime, 1gbs bandwidth

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220628105434.295905-5-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

While 1 second might be enough to converge migration on a fast host,
this is not guaranteed, especially if using TLS in the tests without
hardware accelerated crypto available.

Increasing the downtime to 30 seconds should guarantee it can converge
in any sane scenario.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220628105434.295905-4-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

When moving into the convergance phase, the precopy tests will first
look for a STOP event and once found will look for migration completion
status. If the test VM is not converging, the test suite will be waiting
for the STOP event forever. If we wait for the migration completion
status first, then we will trigger the previously added timeout and
prevent the test hanging forever.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220628105434.295905-3-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Currently the wait_for_migration_fail and wait_for_migration_complete
functions will spin in an infinite loop checking query-migrate status
to detect a specific change/goal. This is fine when everything goes
to plan, but when the unusual happens, these will hang the test suite
forever.

Any normally executing migration test case normally takes < 1 second
for a state change, with exception of the autoconverge test which
takes about 5 seconds. Taking into account possibility of people
running tests inside TCG, allowing a factor of x20 slowdown gives
a reasonable worst case of 120 seconds. Anything taking longer than
this is a strong sign that the test has hung, or the test should be
rewritten to be faster.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220628105434.295905-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Recent runs have been taking just over the 60m default.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606182436.410053-1-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

To preserve contributor CI credits we don't want jobs to run by default
unless the QEMU_CI variable is set. For most jobs we can achieve this
using the base template, but the edk2/opensbi jobs are a little special
as they have some complex conditions we can't easily model in the base
template.

We duplicate existing rules and put them under control of QEMU_CI
variable, such that QEMU_CI=1 creates manual jobs and QEMU_CI=2
immediately runs jobs.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220629170638.520630-4-berrange@redhat.com>
[thuth: Fixed "on_success" <-> "manual" copy-n-paste bug]
Signed-off-by: Thomas Huth <thuth@redhat.com>

Get rid of comments stating the obvious and re-arrange remaining
comments. The opensbi split of rules for file matches is also
merged into one rule.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220629170638.520630-3-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

The edk2/opensbi gitlab CI config was using single space indents
which is not consistent with the rest of the gitlab CI config
files.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220629170638.520630-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Technically we don't need the TCG accelerator to run the
softfloat3 tests. However it is unlikely an interesting
build combination. Developers using softfloat3 likely use
TCG too. Similarly, developers disabling TCG shouldn't
mind much about softfloat3 tests.

This reduces a non-TCG build by 474 objects!

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220204152924.6253-3-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Reported by ASAN.

Fixes commit cfb34489 ("cutils: add functions for IEC and SI prefixes").

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220621083420.66365-1-marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

usb: canokey fixes.
ui: better tab labels, cocoa fix,
docs: convert fw_cfg to rst.

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmLCndwACgkQTLbY7tPo
# cTjNHA/+MT56crVXnjMTdgBRLOuq0cxYnIUptN0JPKx9DTJzdlXEyT+zYD7iIzUt
# W0xbOrTLVzU9hfJVh9/5V2HuFmc1eAhfl0BDTzd1TT0kdH6LyUkz5RWgotzo3nvH
# 7tnl/sBy48a7diSyQn6K2s8r35ubrX1GNJiJcCLWdVEqvzKKWDEqebs02PxbN/OJ
# 9UG9xtkM/QQ1+h74jq5BGKXf08xOhOZIjO274Sn5zievBC9JU6RVkCOlUXiBdk51
# +vNTfKt3c864cstryXSTknYWyVv7zKzCqr7xR7c+fgbt3cN/HmLkM9LGytDMEDl/
# IC0CtKiRN316GgVHHMDT8v8X2dVHNH9ZEEoXRKIbc5jD/tetJw7IIEO7blJphdpV
# WE4/bRpJwYVW9UHzig9rPRxsHLs3NSZbNCQEbGUvAbZzS2kq9hnDa/BBtFSYaf+X
# RIwR7rY7WhENfSrus1jR5rfWRU7n+q+fcNIFZetUakH1V6Idb0xQir3eM/yM6sBC
# nzQSzzLsd3Mwh2ahbnLZ1HkyybZV692usVylKsFLVwcUhCvk+VHccOF31QfrxO/j
# ogVzTYYtfrGM5kaknueIMg7XAhjQ04Av70+0b886kZawB3ZE5Ccare2TztHq1jcG
# dMdEm7DLaDRm2RXa9NtcbxsIrS0DT2EuFcBnQ1mHMCGql4MidzE=
# =Bhbw
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Jul 2022 01:29:24 PM +0530
# gpg:                using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [undefined]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [undefined]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* tag 'kraxel-20220704-pull-request' of https://gitlab.com/kraxel/qemu

:
  hw: canokey: Remove HS support as not compliant to the spec
  docs/system/devices/usb/canokey: remove limitations on qemu-xhci
  hw/usb/canokey: fix compatibility of qemu-xhci
  hw/usb/canokey: Fix CCID ZLP
  ui/cocoa: Fix clipboard text release
  ui/console: allow display device to be labeled with given id
  Convert fw_cfg.rst to reStructuredText syntax
  Rename docs/specs/fw_cfg.txt to .rst

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Fifth RISC-V PR for QEMU 7.1

* Fix register zero guarding for auipc and lui
* Ensure bins (mtval) is set correctly
* Minimize the calls to decode_save_opc
* Guard against PMP ranges with a negative size
* Implement mcountinhibit CSR
* Add support for hpmcounters/hpmevents
* Improve PMU implenentation
* Support mcycle/minstret write operation
* Fixup MSECCFG minimum priv check
* Ibex (OpenTitan) fixup priv version
* Fix bug resulting in always using latest priv spec
* Reduce FDT address alignment constraints
* Set minumum priv spec version for mcountinhibit
* AIA update to v0.3 of the spec

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmLA3r8ACgkQIeENKd+X
# cFQdFQf6A63mocJxSc0vqMTBNULwgcUKbRbnkazbFS4vtbo/YXioCGaHA8c8trKj
# HbZfJv64phOThj7Y8ifLozENjnHX7dHbspPOcWIK9yalvKLA4EB4+OI7LisoL1vg
# H4E+9nXSzskaCmJgwSM6WlS0Vf89VxL0CoBb3XqJocSaajstg1XpqrR9anTZlUhl
# N712cLze+bOxBHTdjtC5Kxuxj+zmNvcMmuhldIJRdPCW8P5v2yccNVc6+hrE3WUX
# 9jHGMthS4qC5oVhok14/tPoyL0QTZpU2DXrJPFGUigOvUHoMBfQ3Qhulx3/rGLZv
# 4SdTD9ASrNWJfa+eyHAPNw//5NxTYA==
# =N7VN
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 03 Jul 2022 05:41:43 AM +0530
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* tag 'pull-riscv-to-apply-20220703-1' of github.com:alistair23/qemu:
  target/riscv: Update default priority table for local interrupts
  target/riscv: Remove CSRs that set/clear an IMSIC interrupt file bits
  target/riscv: Set minumum priv spec version for mcountinhibit
  hw/riscv: boot: Reduce FDT address alignment constraints
  target/riscv: Don't force update priv spec version to latest
  target/riscv: Ibex: Support priv version 1.11
  target/riscv: Fixup MSECCFG minimum priv check
  target/riscv: Support mcycle/minstret write operation
  target/riscv: Add support for hpmcounters/hpmevents
  target/riscv: Implement mcountinhibit CSR
  target/riscv: pmu: Make number of counters configurable
  target/riscv: pmu: Rename the counters extension to pmu
  target/riscv: Implement PMU CSR predicate function for S-mode
  target/riscv: Fix PMU CSR predicate function
  target/riscv/pmp: guard against PMP ranges with a negative size
  target/riscv: Minimize the calls to decode_save_opc
  target/riscv: Remove generate_exception_mtval
  target/riscv: Set env->bins in gen_exception_illegal
  target/riscv: Remove condition guarding register zero for auipc and lui

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

The latest AIA draft v0.3.0 defines a relatively simpler scheme for
default priority assignments where:
1) local interrupts 24 to 31 and 48 to 63 are reserved for custom use
   and have implementation specific default priority.
2) remaining local interrupts 0 to 23 and 32 to 47 have a recommended
   (not mandatory) priority assignments.

We update the default priority table and hviprio mapping as-per above.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220616031543.953776-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Based on architecture review committee feedback, the [m|s|vs]seteienum,
[m|s|vs]clreienum, [m|s|vs]seteipnum, and [m|s|vs]clreipnum CSRs are
removed in the latest AIA draft v0.3.0 specification.
(Refer, https://github.com/riscv/riscv-aia/releases/tag/0.3.0-draft.31

)

These CSRs were mostly for software convenience and software can always
use [m|s|vs]iselect and [m|s|vs]ireg CSRs to update the IMSIC interrupt
file bits.

We update the IMSIC CSR emulation as-per above to match the latest AIA
draft specification.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220616031543.953776-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

The minimum priv spec versino for mcountinhibit to v1.11 so that it
is not available for v1.10 (or lower).

Fixes: eab4776b2bad ("target/riscv: Add support for hpmcounters/hpmevents")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220628101737.786681-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

We previously stored the device tree at a 16MB alignment from the end of
memory (or 3GB). This means we need at least 16MB of memory to be able
to do this. We don't actually need the FDT to be 16MB aligned, so let's
drop it down to 2MB so that we can support systems with less memory,
while also allowing FDT size expansion.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/992


Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20220608062015.317894-1-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

The riscv_cpu_realize() sets priv spec version to v1.12 when it is
when "env->priv_ver == 0" (i.e. default v1.10) because the enum
value of priv spec v1.10 is zero.

Due to above issue, the sifive_u machine will see priv spec v1.12
instead of priv spec v1.10.

To fix this issue, we set latest priv spec version (i.e. v1.12)
for base rv64/rv32 cpu and riscv_cpu_realize() will override priv
spec version only when "cpu->cfg.priv_spec != NULL".

Fixes: 7100fe6c ("target/riscv: Enable privileged spec version 1.12")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220611080107.391981-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

The Ibex CPU supports version 1.11 of the priv spec [1], so let's
correct that in QEMU as well.

1: https://ibex-core.readthedocs.io/en/latest/01_overview/compliance.html



Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220629233102.275181-3-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

There is nothing in the RISC-V spec that mandates version 1.12 is
required for ePMP and there is currently hardware [1] that implements
ePMP (a draft version though) with the 1.11 priv spec.

1: https://ibex-core.readthedocs.io/en/latest/01_overview/compliance.html



Fixes: a4b2fa43 ("target/riscv: Introduce privilege version field in the CSR ops.")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220629233102.275181-2-alistair.francis@opensource.wdc.com>

mcycle/minstret are actually WARL registers and can be written with any
given value. With SBI PMU extension, it will be used to store a initial
value provided from supervisor OS. The Qemu also need prohibit the counter
increment if mcountinhibit is set.

Support mcycle/minstret through generic counter infrastructure.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-8-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

With SBI PMU extension, user can use any of the available hpmcounters to
track any perf events based on the value written to mhpmevent csr.
Add read/write functionality for these csrs.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-7-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

As per the privilege specification v1.11, mcountinhibit allows to start/stop
a pmu counter selectively.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-6-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

The RISC-V privilege specification provides flexibility to implement
any number of counters from 29 programmable counters. However, the QEMU
implements all the counters.

Make it configurable through pmu config parameter which now will indicate
how many programmable counters should be implemented by the cpu.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-5-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

The PMU counters are supported via cpu config "Counters" which doesn't
indicate the correct purpose of those counters.

Rename the config property to pmu to indicate that these counters
are performance monitoring counters. This aligns with cpu options for
ARM architecture as well.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-4-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Currently, the predicate function for PMU related CSRs only works if
virtualization is enabled. It also does not check mcounteren bits before
before cycle/minstret/hpmcounterx access.

Support supervisor mode access in the predicate function as well.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-3-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

The predicate function calculates the counter index incorrectly for
hpmcounterx. Fix the counter index to reflect correct CSR number.

Fixes: e39a8320 ("target/riscv: Support the Virtual Instruction fault")
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-2-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

For a TOR entry to match, the stard address must be lower than the end
address. Normally this is always the case, but correct code might still
run into the following scenario:

Initial state:

	pmpaddr3 = 0x2000	pmp3cfg = OFF
	pmpaddr4 = 0x3000	pmp4cfg = TOR

Execution:

	1. write 0x40ff to pmpaddr3
	2. write 0x32ff to pmpaddr4
	3. set pmp3cfg to NAPOT with a read-modify-write on pmpcfg0
	4. set pmp4cfg to NAPOT with a read-modify-write on pmpcfg1

When (2) is emulated, a call to pmp_update_rule() creates a negative
range for pmp4 as pmp4cfg is still set to TOR. And when (3) is emulated,
a call to tlb_flush() is performed, causing pmp_get_tlb_size() to return
a very creatively large TLB size for pmp4. This, in turn, may result in
accesses to non-existent/unitialized memory regions and a fault, so that
(4) ends up never being executed.

This is in m-mode with MPRV unset, meaning that unlocked PMP entries
should have no effect. Therefore such a behavior based on PMP content
is very unexpected.

Make sure no negative PMP range can be created, whether explicitly by
the emulated code or implicitly like the above.

Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <3oq0sqs1-67o0-145-5n1s-453o118804q@syhkavp.arg>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

The set of instructions that require decode_save_opc for
unwinding is really fairly small -- only insns that can
raise ILLEGAL_INSN at runtime.  This includes CSR, anything
that uses a *new* fp rounding mode, and many privileged insns.

Since unwind info is stored as the difference from the
previous insn, storing a 0 for most insns minimizes the
size of the unwind info.

Booting a debian kernel image to the missing rootfs panic yields

- gen code size       22226819/1026886656
+ gen code size       21601907/1026886656

on 41k TranslationBlocks, a savings of 610kB or a bit less than 3%.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220604231004.49990-4-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

The function doesn't set mtval, it sets badaddr. Move the set
of badaddr directly into gen_exception_inst_addr_mis and use
generate_exception.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220604231004.49990-3-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

While we set env->bins when unwinding for ILLEGAL_INST,
from e.g. csrrw, we weren't setting it for immediately
illegal instructions.

Add a testcase for mtval via both exception paths.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1060


Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220604231004.49990-2-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Commit 57c108b8 introduced gen_set_gpri(), which already contains
a check for if the destination register is 'zero'. The check in auipc
and lui are then redundant. This patch removes those checks.

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220610165517.47517-1-victor.colombo@eldorado.org.br>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Merge tag 'bsd-user-syscall-2022q2b-pull-request' of ssh://github.com/qemu-bsd-user/qemu-bsd-user into staging

bsd-user: More file-related system calls

A second round of mostly BSD-independent filesystem calls: mount, unmount,
nmount, symlink, symlinkat, readlink, readlinkat, chmod, fchmod, lchmod,
fchmodat, freebsd11_mknod, freebsd11_monodat, mknodat, chown, fchown, lchown,
fchownat, chflags, lchflags, fchflags, chroot, flock, mkfifo, mkfifoat,
pathconf, lpathconf, fpathconf, undelete.

These are all non-reentrant system calls, so these wrappers are pretty simple
and no safe_* versions need to be created.

# -----BEGIN PGP SIGNATURE-----
# Comment: GPGTools - https://gpgtools.org
#
# iQIzBAABCgAdFiEEIDX4lLAKo898zeG3bBzRKH2wEQAFAmLATlEACgkQbBzRKH2w
# EQCJvRAA2e0sluqz6nbnCGywtSpdfIf9yJXOk5ORlPz6p2oFJPxDMEHbeKA/DCAt
# PEoPKsWzKK/NDzos+FiypOlQFxacqq86xHnQKCq7yd8PBa6ydoBxgxtoLD0uQtfo
# 3RyFeFZRDtKfs6xtrP7mNPIv569NsaHspEvnf6gV08h+EY3q44UoAiMIv8TE9/17
# ZRaqOW9bX9LTTWvUSIJG6t3Z83+cCOuQODE9leZwW9QlcAAYVBJzdthefDlmvaWd
# eZvAaEoIiKEnlX8e9jGRzP2HEj68ToNKq3BQfFhpOeeEydNv2gWoxWhUG13LOCVK
# RD/0wJOFSFTUy2GeTPRdfFENqkISsDxFoTvAr4fhkYRbo8F2DNeCyqz0JOgp9Eie
# GG4UA373yvgSdKADPIGBc/+d/txgibGHgVKEiMZAm7tlKU8qHIJEmo841YwUD8YW
# K1MTXi809yo2kodDVTsU7JPCbx4/xt2C8IVAL0hUXHvYBRQt4Fc5DcCyO10ARQlA
# TygdLO7CXXnSE/mZYv5wuC4H5yBDpg8xTkXkfz8RuYXR6sqS3qIw+bWAjyOdfkc4
# ZCdMkeoIaSmu30RX5oUaqLPdtnFmXCAS3w+Bfz9Q0M7wId884A2wgNXoUR009uxH
# 8+Qpj9IZjf53ZNfYEbANd55/pUZITU+FDI20AZDEzxoMphaGmwM=
# =7PH8
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 02 Jul 2022 07:25:29 PM +0530
# gpg:                using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg:                 aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg:                 aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg:                 aka "Warner Losh <imp@village.org>" [unknown]
# gpg:                 aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD  E1B7 6C1C D128 7DB0 1100

* tag 'bsd-user-syscall-2022q2b-pull-request' of ssh://github.com/qemu-bsd-user/qemu-bsd-user

:
  bsd-user: Remove stray 'inline' from do_bsd_close
  bsd-user: Implement undelete
  bsd-user: Implement pathconf, lpathconf and fpathconf
  bsd-user: Implement mkfifo and mkfifoat
  bsd-user: Implement chroot and flock
  bsd-user: Implement chflags, lchflags and fchflags
  bsd-user: Implement chown, fchown, lchown and fchownat
  bsd-user: Implement freebsd11_mknod, freebsd11_mknodat and mknodat
  bsd-user: implement chmod, fchmod, lchmod and fchmodat
  bsd-user: Implement symlink, symlinkat, readlink and readlinkat
  bsd-user: Implement mount, umount and nmount

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

In the last series, I inadvertantly didn't remove this inline, but did
all the others. Remove it for consistency.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>