Fixed the travis.py script that has failed to parse the current
QEMU_SRC/.travis.yml file. It no longer makes combinations from
env/matrix, instead it uses explicit includes. Also the compiler
can be omitted from matrix/include, so that Travis chooses the
first entry of the global compiler list.

Replaced yaml.load() with yaml.safe_load() so that quieting the
following deprecation warning:
https://github.com/yaml/pyyaml/wiki/PyYAML-yaml.load(input)-Deprecation



Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190320221207.11366-2-wainersm@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Before falling back to softfloat FMA, we do not restore the original
values of inputs A and C. Fix it.

This bug was caught by running gcc's testsuite on RISC-V qemu.

Note that this change gives a small perf increase for fp-bench:

  Host: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
  Command: perf stat -r 3 taskset -c 0 ./fp-bench -o mulAdd -p $prec

- $prec = single:
  - before:
    101.71 MFlops
    102.18 MFlops
    100.96 MFlops
  - after:
    103.63 MFlops
    103.05 MFlops
    102.96 MFlops

- $prec = double:
  - before:
    173.10 MFlops
    173.93 MFlops
    172.11 MFlops
  - after:
    178.49 MFlops
    178.88 MFlops
    178.66 MFlops

Signed-off-by: Kito Cheng <kito.cheng@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190322204320.17777-1-cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Wrong type of NaN was generated for IEEE 754-2008 by MADDF.<D|S> and
MSUBF.<D|S> instructions when the arguments were (Inf, Zero, NaN) or
(Zero, Inf, NaN).

The if-else statement establishes if the system conforms to IEEE
754-1985 or IEEE 754-2008, and defines different behaviors depending
on that. In case of IEEE 754-2008, in mentioned cases of inputs,
<MADDF|MSUBF>.<D|S> returns the input value 'c' [2] (page 53) and
raises floating point exception 'Invalid Operation' [1] (pages 349,
350).

These scenarios were tested and the results in QEMU emulation match
the results obtained on the machine that has a MIPS64R6 CPU.

[1] MIPS Architecture for Programmers Volume II-a: The MIPS64
    Instruction Set Reference Manual, Revision 6.06
[2] MIPS Architecture for Programmers Volume IV-j: The MIPS64
    SIMD Architecture Module, Revision 1.12

Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Message-Id: <1553008916-15274-2-git-send-email-mateja.marjanovic@rt-rk.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[AJB: fixed up commit message]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

This build keeps timing out on Travis and it's unlikely including the
additional guest front-ends will catch any failures in the fallback
code.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>

This is essentially a softmmu tweak so don't bother building
linux-user builds as well.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>

We define a new class of targets (MAIN_SOFTMMU_TARGETS) to cover the
major architectures. We either just build those or use the new
target-list-exclude mechanism to remove them from the list. This will
hopefully stop some of the longer builds hitting the Travis timeout
limit.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>

This is an inverse selection which excludes a selected set of targets
from the default target list. It will mostly be useful for CI
configurations but it might be useful for some users as well.

You cannot specify --target-list and --target-list-exclude at the same
time.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>

x86 queue for -rc1

A few fixes that missed -rc0:
* CPU model documentation updates (Daniel P. Berrangé)
* Fix bogus OSPKE warnings (Eduardo Habkost)
* Work around KVM bugs when handing arch_capabilities
  (Eduardo Habkost)

# gpg: Signature made Thu 21 Mar 2019 19:32:02 GMT
# gpg:                using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-next-pull-request:
  docs: add note about stibp CPU feature for spectre v2
  docs: clarify that spec-ctrl is only needed for Spectre v2
  i386: Disable OSPKE on CPU model definitions
  i386: Make arch_capabilities migratable
  i386: kvm: Disable arch_capabilities if MSR can't be set

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Fix object interface check macro usage

# gpg: Signature made Thu 21 Mar 2019 11:53:15 GMT
# gpg:                using RSA key BE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* remotes/berrange/tags/authz-next-pull-request:
  authz: Use OBJECT_CHECK() on objects

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Avoid struct packing warnings with gcc9

# gpg: Signature made Thu 21 Mar 2019 11:55:03 GMT
# gpg:                using RSA key BE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* remotes/berrange/tags/qcrypto-next-pull-request:
  crypto/block: remove redundant struct packing to fix build with gcc 9

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Build fails with gcc 9:

crypto/block-luks.c:689:18: error: taking address of packed member of ‘struct QCryptoBlockLUKSHeader’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
  689 |     be32_to_cpus(&luks->header.payload_offset);
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
crypto/block-luks.c:690:18: error: taking address of packed member of ‘struct QCryptoBlockLUKSHeader’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
  690 |     be32_to_cpus(&luks->header.key_bytes);
      |                  ^~~~~~~~~~~~~~~~~~~~~~~
crypto/block-luks.c:691:18: error: taking address of packed member of ‘struct QCryptoBlockLUKSHeader’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
  691 |     be32_to_cpus(&luks->header.master_key_iterations);
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

... a bunch of similar errors...

crypto/block-luks.c:1288:22: error: taking address of packed member of ‘struct QCryptoBlockLUKSKeySlot’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
 1288 |         be32_to_cpus(&luks->header.key_slots[i].stripes);
      |                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

All members of the QCryptoBlockLUKSKeySlot and QCryptoBlockLUKSHeader are
naturally aligned and we already check at build time there isn't any
unwanted padding. Drop the QEMU_PACKED attribute.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

TYPE_QAUTHZ is an abstract object of type TYPE_OBJECT. All other
are children of TYPE_QAUTHZ, thus also objects.

Keep INTERFACE_CHECK() for interfaces, and use OBJECT_CHECK() on
objects.

Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

Merge I/O patch queue

Fix problem with end of file handling with websock channels

# gpg: Signature made Wed 20 Mar 2019 16:57:15 GMT
# gpg:                using RSA key BE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* remotes/berrange/tags/qio-next-pull-request:
  io: fix handling of EOF / error conditions in websock GSource

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

We were never reporting the G_IO_HUP event when an end of file was hit
on the websocket channel.

We also didn't report G_IO_ERR when we hit a fatal error processing the
websocket protocol.

The latter in particular meant that the chardev code would not notice
when an eof/error was encountered on the websocket channel, unless the
guest OS happened to trigger a write operation.

This meant that once the first client had quit, the chardev would never
listen to accept a new client.

Fixes launchpad bug 1816819
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

While the stibp CPU feature is not commonly used by guest OS for spectre
mitigation due to its performance impact, it is none the less best
practice to expose it to all guest OS. This allows the guest OS to
decide whether to make use or it.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190307121838.6345-3-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

The docs currently say that the spec-ctrl feature is needed for both
Spectre variants, but it is only used to address Spectre v2. Also
remove the note about retpolines. The guest OS is usually treated
as a blackbox from host mgmt pov, so it won't have knowledge about
use of retpolines and thus should unconditionally expose spec-ctrl,
allowing the guest to decide whether to use it or not.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190307121838.6345-2-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

Currently, the Cascadelake-Server, Icelake-Client, and
Icelake-Server are always generating the following warning:

  qemu-system-x86_64: warning: \
    host doesn't support requested feature: CPUID.07H:ECX [bit 4]

This happens because OSPKE was never returned by
GET_SUPPORTED_CPUID or x86_cpu_get_supported_feature_word().
OSPKE is a runtime flag automatically set by the KVM module or by
TCG code, was always cleared by x86_cpu_filter_features(), and
was not supposed to appear on the CPU model table.

Remove the OSPKE flag from the CPU model table entries, to avoid
the bogus warning and avoid returning invalid feature data on
query-cpu-* QMP commands.  As OSPKE was always cleared by
x86_cpu_filter_features(), this won't have any guest-visible
impact.

Include a test case that should detect the problem if we introduce
a similar bug again.

Fixes: c7a88b52 ("i386: Add new model of Cascadelake-Server")
Fixes: 8a11c62d ("i386: Add new CPU model Icelake-{Server,Client}")
Cc: Tao Xu <tao3.xu@intel.com>
Cc: Robert Hoo <robert.hu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190319200515.14999-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

Now that kvm_arch_get_supported_cpuid() will only return
arch_capabilities if QEMU is able to initialize the MSR properly,
we know that the feature is safely migratable.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190125220606.4864-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

KVM has two bugs in the handling of MSR_IA32_ARCH_CAPABILITIES:

1) Linux commit commit 1eaafe91a0df ("kvm: x86: IA32_ARCH_CAPABILITIES
   is always supported") makes GET_SUPPORTED_CPUID return
   arch_capabilities even if running on SVM.  This makes "-cpu
   host,migratable=off" incorrectly expose arch_capabilities on CPUID on
   AMD hosts (where the MSR is not emulated by KVM).

2) KVM_GET_MSR_INDEX_LIST does not return MSR_IA32_ARCH_CAPABILITIES if
   the MSR is not supported by the host CPU.  This makes QEMU not
   initialize the MSR properly at kvm_put_msrs() on those hosts.

Work around both bugs on the QEMU side, by checking if the MSR
was returned by KVM_GET_MSR_INDEX_LIST before returning the
feature flag on kvm_arch_get_supported_cpuid().

This has the unfortunate side effect of making arch_capabilities
unavailable on hosts without hardware support for the MSR until bug #2
is fixed on KVM, but I can't see another way to work around bug #1
without that side effect.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190125220606.4864-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Block layer patches:

- mirror: Fix early return from drain (could cause deadlocks)
- vmdk: Fixed probing for version 3 images
- vl: Fix to create migration object before block backends again (fixes
  segfault for block drivers that set migration blockers)
- Several minor fixes, documentation and test case improvements

# gpg: Signature made Tue 19 Mar 2019 14:59:17 GMT
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  qemu-iotests: Treat custom TEST_DIR in 051
  blockdev: Check @replaces in blockdev_mirror_common
  block: Make bdrv_{copy_on_read,crypto_luks,replication} static
  blockjob: fix user pause in block_job_error_action
  qemu-iotests: Fix 232 for non-qcow2
  vl: Fix to create migration object before block backends again
  iotests: 153: Wait for an answer to QMP commands
  block: Silence Coverity in bdrv_drop_intermediate()
  vmdk: Support version=3 in VMDK descriptor files
  qapi: fix block-latency-histogram-set description and examples
  qcow2: Fix data file error condition in qcow2_co_create()
  mirror: Confirm we're quiesced only if the job is paused or cancelled

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Xen queue

Fix a bug on FreeBSD when doing a migration.

# gpg: Signature made Tue 19 Mar 2019 15:40:55 GMT
# gpg:                using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF
# gpg:                issuer "anthony.perard@citrix.com"
# gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [marginal]
# gpg:                 aka "Anthony PERARD <anthony.perard@citrix.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5379 2F71 024C 600F 778A  7161 D8D5 7199 DF83 42C8
#      Subkey fingerprint: F80C 0063 08E2 2CFD 8A92  E798 0CF5 572F D7FB 55AF

* remotes/aperard/tags/pull-xen-20190319:
  xen-mapcache: use MAP_FIXED flag so the mmap address hint is always honored

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Or if it's not possible to honor the hinted address an error is returned
instead. This makes it easier to spot the actual failure, instead of
failing later on when the caller of xen_remap_bucket realizes the
mapping has not been created at the requested address.

Also note that at least on FreeBSD using MAP_FIXED will cause mmap to
try harder to honor the passed address.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Igor Druzhinin <igor.druzhinin@cirtix.com>
Message-Id: <20190318173731.14494-1-roger.pau@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>

When custom TEST_DIR is specified the output includes it without leading
'/':

    $ TEST_DIR=/var/tmp ./check -file -qcow2 051
    ....
-drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file":
{"driver": "file", "filename": "TEST_DIR/t.qcow2"}}, "driver": "qcow2",
"file": {"driver": "file", "filename": SNAPSHOT_PATH}} (qcow2,
read-only)
+drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file":
{"driver": "file", "filename": "TEST_DIR/t.qcow2"}}, "driver": "qcow2",
"file": {"driver": "file", "filename": "TEST_DIR/vl.ziHfeP"}} (qcow2,
read-only)

Let's remove it from the sed regexp.

Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

There is no reason why the constraints we put on @replaces should be
limited to drive-mirror.  Therefore, move the sanity checks from
qmp_drive_mirror() to blockdev_mirror_common() so they apply to
blockdev-mirror as well.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Job (especially mirror) may call block_job_error_action several
times before actual pause if it has several in-flight requests.

block_job_error_action will call job_pause more than once in this case,
which lead to following block-job-resume qmp command can't actually
resume the job.

Fix it by do not increase pause level in block_job_error_action if
user_paused already set.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

232 is marked as generic, but commit 12efe428 added code that assumes
qcow2. What the new test really needs is backing files and support for
updating the backing file link (.bdrv_change_backing_file).

Split the non-generic code into a new test case 247 and make it work
with qed, too.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Recent commit cda4aa9a moved block backend creation before machine
property evaluation.  This broke qemu-iotests 055.  Turns out we need
to create the migration object before block backends, so block
backends can add migration blockers.  Fix by calling
migration_object_init() earlier, right before configure_blockdev().

Fixes: cda4aa9a
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

There are various actions in this test that must be executed
sequentially, as the result of it depends on the state triggered by the
previous one.

If the last argument of _send_qemu_cmd() is an empty string, it just
sends the QMP commands without waiting for an answer. While unlikely, it
may happen that the next action in the test gets invoked before QEMU
processes the QMP request.

This issue seems to be easier to reproduce on servers with limited
resources or highly loaded.

With this change, we wait for an answer on all _send_qemu_cmd() calls.

Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Coverity doesn't like that the return value of bdrv_check_update_perm()
stays unused only in this place (CID 1399710).

Even if checking local_err should be equivalent to checking ret < 0,
let's switch to using the return value to be more consistent (and in
case of a bug somewhere down the call chain, forgetting to assign errp
is more likely than returning 0 for an error case).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>

Commit 509d39aa added support for read
only VMDKs of version 3.

This commit fixes the probe function to correctly handle descriptors of
version 3.

This commit has two effects:
    1. We no longer need to supply '-f vmdk' when pointing to descriptor
       files of version 3 in qemu/qemu-img command line arguments.
    2. This fixes the scenario where a VMDK points to a parent version 3
       descriptor file which is being probed as "raw" instead of "vmdk".

Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Shmuel Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

There no @device parameter, only the @id one.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

We were trying to check whether bdrv_open_blockdev_ref() returned
success, but accidentally checked the wrong variable. Spotted by
Coverity (CID 1399703).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>

While child_job_drained_begin() calls to job_pause(), the job doesn't
actually transition between states until it runs again and reaches a
pause point. This means bdrv_drained_begin() may return with some jobs
using the node still having 'busy == true'.

As a consequence, block_job_detach_aio_context() may get into a
deadlock, waiting for the job to be actually paused, while the coroutine
servicing the job is yielding and doesn't get the opportunity to get
scheduled again. This situation can be reproduced by issuing a
'block-commit' immediately followed by a 'device_del'.

To ensure bdrv_drained_begin() only returns when the jobs have been
paused, we change mirror_drained_poll() to only confirm it's quiesced
when job->paused == true and there aren't any in-flight requests, except
if we reached that point by a drained section initiated by the
mirror/commit job itself.

The other block jobs shouldn't need any changes, as the default
drained_poll() behavior is to only confirm it's quiesced if the job is
not busy or completed.

Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

RISC-V Patches for 4.0-rc0, Part 2

This patch set contains three major sources of bug fixes:

* Jim has added support for GDB XML files, as well as fixing access to
  CSRs via the GDB stub.
* Alistair has rebased a large set of fixes from Michael that were still
  in his patch queue.  These fix bugs all over our tree, including:
    * Logging of PMP errors.
    * User ABI cleanups and fixes, most notably on RVE guests.
    * Fixes for interrupt emulation fidelity.
    * Improvements to the emulation fidelity of the sifive_u machine.
* Bin Meng has improved the emulation fidelity of the SiFive UART, which
  now supports both TX and RX interrupts (as well as setting the correct
  interrupt line).

# gpg: Signature made Tue 19 Mar 2019 12:42:11 GMT
# gpg:                using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg:                issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg:                 aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88  6DF8 EF4C A150 2CCB AB41

* remotes/palmer/tags/riscv-for-master-4.0-rc0-2:
  riscv: sifive_u: Correct UART0's IRQ in the device tree
  riscv: sifive_uart: Generate TX interrupt
  target/riscv: Remove unused struct
  riscv: sifive_u: Allow up to 4 CPUs to be created
  RISC-V: Update load reservation comment in do_interrupt
  RISC-V: Convert trap debugging to trace events
  RISC-V: Add support for vectored interrupts
  RISC-V: Change local interrupts from edge to level
  RISC-V: linux-user support for RVE ABI
  elf: Add RISC-V PSABI ELF header defines
  RISC-V: Remove unnecessary disassembler constraints
  RISC-V: Allow interrupt controllers to claim interrupts
  RISC-V: Replace __builtin_popcount with ctpop8 in PLIC
  riscv: pmp: Log pmp access errors as guest errors
  RISC-V: Add hooks to use the gdb xml files.
  RISC-V: Add debug support for accessing CSRs.
  RISC-V: Fixes to CSR_* register macros.
  RISC-V: Add 64-bit gdb xml files.
  RISC-V: Add 32-bit gdb xml files.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The UART0's interrupt vector is wrongly set to 1 in the device tree.
Use SIFIVE_U_UART0_IRQ instead.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

At present the sifive uart model only generates RX interrupt. This
updates it to generate TX interrupt so that it is more useful.

Note the TX fifo is still unimplemented.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>