A lot of Optional[] types doesn't make code beautiful.
test_field_width defaults to 8, but that is never used in the code.

More over, if we want some default behavior for single call of
test_run(), it should just print the whole test name, not limiting or
expanding its width, so 8 is bad default.

So, just drop the default as unused for now.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211210201450.101576-1-vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

First, this permission never protected a node from being changed, as
generic child-replacing functions don't check it.

Second, it's a strange thing: it presents a permission of parent node
to change its child. But generally, children are replaced by different
mechanisms, like jobs or qmp commands, not by nodes.

Graph-mod permission is hard to understand. All other permissions
describe operations which done by parent node on its child: read,
write, resize. Graph modification operations are something completely
different.

The only place where BLK_PERM_GRAPH_MOD is used as "perm" (not shared
perm) is mirror_start_job, for s->target. Still modern code should use
bdrv_freeze_backing_chain() to protect from graph modification, if we
don't do it somewhere it may be considered as a bug. So, it's a bit
risky to drop GRAPH_MOD, and analyzing of possible loss of protection
is hard. But one day we should do it, let's do it now.

One more bit of information is that locking the corresponding byte in
file-posix doesn't make sense at all.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210902093754.2352-1-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Consider the case when the whole buffer is zero and end is unaligned.

If i <= tail, we return 1 and do one unaligned WRITE, RMW happens.

If i > tail, we do on aligned WRITE_ZERO (or skip if target is zeroed)
and again one unaligned WRITE, RMW happens.

Let's do better: don't fragment the whole-zero buffer and report it as
ZERO: in case of zeroed target we just do nothing and avoid RMW. If
target is not zeroes, one unaligned WRITE_ZERO should not be much worse
than one unaligned WRITE.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211217164654.1184218-3-vsementsov@virtuozzo.com>
Tested-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

This demonstrates what happens when the block status changes in
sub-min_sparse granularity, but all of the parts are zeroed out. The
alignment logic in is_allocated_sectors() prevents that the target image
remains fully sparse as expected, but turns it into a data cluster of
explicit zeros.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211217164654.1184218-2-vsementsov@virtuozzo.com>
Tested-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

With CAP_DAC_OVERRIDE (which e.g. root generally has), permission checks
will be bypassed when opening files.

308 in one instance tries to open a read-only file (FUSE export) with
qemu-io as read/write, and expects this to fail.  However, when running
it as root, opening will succeed (thanks to CAP_DAC_OVERRIDE) and only
the actual write operation will fail.

Note this as "Case not run", but have the test pass in either case.

Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Fixes: 2c7dd057
       ("export/fuse: Pass default_permissions for mount")
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220103120014.13061-1-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Test the following scenario:
- Simple stream block in two-layer backing chain (base and top)
- The job is drained via blk_drain(), then an error occurs while the job
  settles the ongoing request
- And so the job completes while in blk_drain()

This was reported as a segfault, but is fixed by "block-backend: prevent
dangling BDS pointers across aio_poll()".

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2036178


Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220111153613.25453-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

The -device JSON syntax impl leaks a reference on the created
DeviceState instance. As a result when you hot-unplug the
device, the device_finalize method won't be called and thus
it will fail to emit the required DEVICE_DELETED event.

A 'json-cli' feature was previously added against the
'device_add' QMP command QAPI schema to indicated to mgmt
apps that -device supported JSON syntax. Given the hotplug
bug that feature flag is not usable for its purpose, so
we add a new 'json-cli-hotplug' feature to indicate the
-device supports JSON without breaking hotplug.

Fixes: 5dacda51
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/802


Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220105123847.4047954-2-berrange@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Reenable util/filemonitor-inotify compilation. Compilation was
disabled when commit a620fbe9 ("configure: convert compiler tests
to meson, part 5") moved CONFIG_INOTIFY1 from config-host.mak to
config-host.h.

This fixes the usb-mtp device and reenables test-util-filemonitor.

Fixes: a620fbe9 ("configure: convert compiler tests to meson, part 5")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/800


Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220107133514.7785-1-vr_qemu@t-online.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

With more recent versions of Meson, the build.ninja file is more selective
as to what is built by default, and not building the modules results in test
failures.

Mark the modules as built-by-default and, to make the dependencies more
precise, also require them to be up-to-date before running tests.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/801


Tested-by: Li Zhang <lizhang@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Commit 812b31d3 refactor missed to update this path.

Fixes: 812b31d3 ("configs: rename default-configs to configs and reorganise")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211226001541.3807919-1-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The updated TPM related tables have the following additions:

   Device (TPM)
   {
       Name (_HID, "MSFT0101" /* TPM 2.0 Security Device */)  // _HID: Hardware ID
+      Name (_STR, "TPM 2.0 Device")  // _STR: Description String
+      Name (_UID, One)  // _UID: Unique ID
       Name (_STA, 0x0F)  // _STA: Status
       Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Ani Sinha <ani@anisinha.ca>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-id: 20211223022310.575496-4-stefanb@linux.ibm.com
Message-Id: <20220104175806.872996-4-stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Replace existing TPM related tables, that are about to change, with
empty files.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Ani Sinha <ani@anisinha.ca>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-id: 20211223022310.575496-2-stefanb@linux.ibm.com
Message-Id: <20220104175806.872996-2-stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211227193120.1084176-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

When user uses '-acpitable' to add SLIC table, some ACPI
tables (FADT) will change its 'Oem ID'/'Oem Table ID' fields to
match that of SLIC. Test makes sure thati QEMU handles
those fields correctly when SLIC table is added with
'-acpitable' option.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211227193120.1084176-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211227193120.1084176-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Similarly to commit e63ed64c ("tests/qtest/virtio-net-failover:
Use g_file_open_tmp() to create temporary file"), avoid calling
g_test_rand_int() before g_test_init(): use g_file_open_tmp().

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211224234504.3413370-1-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

The lsi53c895a SCSI controller might have been disabled in the target
binary, so let's check for its availability first before using it.

Message-Id: <20211222153600.976588-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

The user might have disabled the pc-i440fx machine type (or it's older
versions, like done in downstream RHEL) in the QEMU binary, so let's
better check whether the machine types are available before using them.

Message-Id: <20211222153923.1000420-1-thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

The non-signalling versions of VSX scalar convert to shorter/longer
precision insns doesn't silence SNaNs in the hardware. To better match
this behavior, use the non-arithmatic conversion of helper_todouble
instead of float32_to_float64. A test is added to prevent future
regressions.

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211228120310.1957990-1-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Most machine types in test-smp-parse will be OK to have the default
MIN/MAX CPUs except "smp-generic-invalid", let's keep the default
values in machine_base_class_init which will be inherited. And if
we hope a different value for a specific machine, modify it in its
own initialization function.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211228092221.21068-7-wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

The default value of the MachineClass members is 0, which
means we don't have to explicitly zero them. Also the value
of "mc->smp_props.prefer_sockets" will be taken care of by
smp_parse_test(), we don't necessarily need the statement
in machine_base_class_init() either.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211228092221.21068-6-wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

Add testcases for parsing of the four-level CPU topology hierarchy,
ie sockets/clusters/cores/threads, which will be supported on ARM
virt machines.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211228092221.21068-5-wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

All methods related to MachineState are prefixed with "machine_".
smp_parse() does not need to be an exception. Rename it and
const'ify the SMPConfiguration argument, since it doesn't need
to be modified.

Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211216132015.815493-9-philmd@redhat.com>

Declare structures const when we don't need to modify
them at runtime.

Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211216132015.815493-8-philmd@redhat.com>

We can simply use a local variable (and pass its pointer) instead
of a pointer to a compound literal.

Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211216132015.815493-7-philmd@redhat.com>

Keep the common TYPE_MACHINE class initialization in
machine_base_class_init(), make it abstract, and move
the non-common code to a new class: "smp-generic-valid".

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20211216132015.815493-6-philmd@redhat.com>

Avoid modifying the MachineClass internals by adding the
'smp-generic-invalid' machine, which inherits from TYPE_MACHINE.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20211216132015.815493-5-philmd@redhat.com>

Avoid modifying the MachineClass internals by adding the
'smp-with-dies' machine, which inherits from TYPE_MACHINE.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211216132015.815493-4-philmd@redhat.com>

Split the 'generic' test in two tests: 'valid' and 'invalid'.
This will allow us to remove the hack which modifies the
MachineClass internal state.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211216132015.815493-3-philmd@redhat.com>

Use g_test_add_data_func() instead of g_test_add_func() so we can
pass the machine type to the tests (we will soon have different
machine types).

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211216132015.815493-2-philmd@redhat.com>

The parallel version of STBY did not take host endianness into
account, and also computed the incorrect address for STBY_E.

Bswap twice to handle the merge and store.  Compute mask inside
the function rather than as a parameter.  Force align the address,
rather than subtracting one.

Generalize the function to system mode by using probe_access().

Cc: qemu-stable@nongnu.org
Tested-by: Helge Deller <deller@gmx.de>
Reported-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

The cross-i386-tci test has timeouts because we're no longer
applying the timeout that we desired.  Hack around it.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fixes: 23a77b2d ("build-system: clean up TCG/TCI configury")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use $cpu instead of $ARCH, which has been removed from
the top-level configure.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fixes: 823eb013 ("configure, meson: move ARCH to meson.build")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

It's unused now (except for permission handling)[*]. The only reasonable
user of it was block-stream job, recently updated to use own blk. And
other block jobs prefer to use own source node related objects.

So, the arguments of dropping the field are:

 - block jobs prefer not to use it
 - block jobs usually has more then one node to operate on, and better
   to operate symmetrically (for example has both source and target
   blk's in specific block-job state structure)

*: BlockJob.blk is used to keep some permissions. We simply move
permissions to block-job child created in block_job_create() together
with blk.

In mirror, we just should not care anymore about restoring state of
blk. Most probably this code could be dropped long ago, after dropping
bs->job pointer. Now it finally goes away together with BlockJob.blk
itself.

iotest 141 output is updated, as "bdrv_has_blk(bs)" check in
qmp_blockdev_del() doesn't fail (we don't have blk now). Still, new
error message looks even better.

In iotest 283 we need to add a job id, otherwise "Invalid job ID"
happens now earlier than permission check (as permissions moved from
blk to block-job node).

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>

We are going to drop BlockJob.blk in further commit. For tests it's
enough to simply pass bs pointer.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>

Here we use job->blk to drop our own reference in job cleanup. Let's do
simpler: drop our reference immediately after job creation.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>

"meson test" starting with version 0.57 is just as capable and easy to
use as QEMU's own TAP driver.  All existing options for "make check"
work.  The only required code change involves how to mark "slow" tests;
they need to belong to an additional "slow" suite.

The rules for .tap output are replaced by JUnit XML; GitLab is able
to parse that output and present it in the CI pipeline report.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>

Add qemu-io Popen constructor wrapper. To be used in the following new
test commit.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>

For qemu_io* functions support --image-opts argument, which conflicts
with -f argument from qemu_io_args.

For QemuIoInteractive use new wrapper as well, which allows relying on
default format.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>