Skip to content
Snippets Groups Projects
Select Git revision
  • feature/libtcg-rebase default protected
1 result
Search by author
  • Any Author
  • Anton Anton anjo
1 author
  1. Sep 19, 2023
    • David Hildenbrand's avatar
      backends/hostmem-file: Add "rom" property to support VM templating with R/O files · e92666b0
      David Hildenbrand authored 
      
For now, "share=off,readonly=on" would always result in us opening the
file R/O and mmap'ing the opened file MAP_PRIVATE R/O -- effectively
turning it into ROM.

Especially for VM templating, "share=off" is a common use case. However,
that use case is impossible with files that lack write permissions,
because "share=off,readonly=on" will not give us writable RAM.

The sole user of ROM via memory-backend-file are R/O NVDIMMs, but as we
have users (Kata Containers) that rely on the existing behavior --
malicious VMs should not be able to consume COW memory for R/O NVDIMMs --
we cannot change the semantics of "share=off,readonly=on"

So let's add a new "rom" property with on/off/auto values. "auto" is
the default and what most people will use: for historical reasons, to not
change the old semantics, it defaults to the value of the "readonly"
property.

For VM templating, one can now use:
    -object memory-backend-file,share=off,readonly=on,rom=off,...

But we'll disallow:
    -object memory-backend-file,share=on,readonly=on,rom=off,...
because we would otherwise get an error when trying to mmap the R/O file
shared and writable. An explicit error message is cleaner.

We will also disallow for now:
    -object memory-backend-file,share=off,readonly=off,rom=on,...
    -object memory-backend-file,share=on,readonly=off,rom=on,...
It's not harmful, but also not really required for now.

Alternatives that were abandoned:
* Make "unarmed=on" for the NVDIMM set the memory region container
  readonly. We would still see a change of ROM->RAM and possibly run
  into memslot limits with vhost-user. Further, there might be use cases
  for "unarmed=on" that should still allow writing to that memory
  (temporary files, system RAM, ...).
* Add a new "readonly=on/off/auto" parameter for NVDIMMs. Similar issues
  as with "unarmed=on".
* Make "readonly" consume "on/off/file" instead of being a 'bool' type.
  This would slightly changes the behavior of the "readonly" parameter:
  values like true/false (as accepted by a 'bool'type) would no longer be
  accepted.

Message-ID: <20230906120503.359863-4-david@redhat.com>
Acked-by: default avatarMarkus Armbruster <armbru@redhat.com>
Signed-off-by: default avatarDavid Hildenbrand <david@redhat.com>
      e92666b0
    • David Hildenbrand's avatar
      softmmu/physmem: Distinguish between file access mode and mmap protection · 5c52a219
      David Hildenbrand authored 
      
There is a difference between how we open a file and how we mmap it,
and we want to support writable private mappings of readonly files. Let's
define RAM_READONLY and RAM_READONLY_FD flags, to replace the single
"readonly" parameter for file-related functions.

In memory_region_init_ram_from_fd() and memory_region_init_ram_from_file(),
initialize mr->readonly based on the new RAM_READONLY flag.

While at it, add some RAM_* flags we missed to add to the list of accepted
flags in the documentation of some functions.

No change in functionality intended. We'll make use of both flags next
and start setting them independently for memory-backend-file.

Message-ID: <20230906120503.359863-3-david@redhat.com>
Acked-by: default avatarPeter Xu <peterx@redhat.com>
Signed-off-by: default avatarDavid Hildenbrand <david@redhat.com>
      5c52a219
  3. Jun 13, 2023
    • Steve Sistare's avatar
      exec/memory: Introduce RAM_NAMED_FILE flag · b0182e53
      Steve Sistare authored 
      
migrate_ignore_shared() is an optimization that avoids copying memory
that is visible and can be mapped on the target.  However, a
memory-backend-ram or a memory-backend-memfd block with the RAM_SHARED
flag set is not migrated when migrate_ignore_shared() is true.  This is
wrong, because the block has no named backing store, and its contents will
be lost.  To fix, ignore shared memory iff it is a named file.  Define a
new flag RAM_NAMED_FILE to distinguish this case.

Signed-off-by: default avatarSteve Sistare <steven.sistare@oracle.com>
Reviewed-by: default avatarPeter Xu <peterx@redhat.com>
Message-Id: <1686151116-253260-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: default avatarPhilippe Mathieu-Daudé <philmd@linaro.org>
      b0182e53
  5. May 23, 2023
  7. Feb 21, 2022
  9. Jun 15, 2021
    • David Hildenbrand's avatar
      hostmem: Wire up RAM_NORESERVE via "reserve" property · 9181fb70
      David Hildenbrand authored 
      
Let's provide a way to control the use of RAM_NORESERVE via memory
backends using the "reserve" property which defaults to true (old
behavior).

Only Linux currently supports clearing the flag (and support is checked at
runtime, depending on the setting of "/proc/sys/vm/overcommit_memory").
Windows and other POSIX systems will bail out with "reserve=false".

The target use case is virtio-mem, which dynamically exposes memory
inside a large, sparse memory area to the VM. This essentially allows
avoiding to set "/proc/sys/vm/overcommit_memory == 0") when using
virtio-mem and also supporting hugetlbfs in the future.

As really only Linux implements RAM_NORESERVE right now, let's expose
the property only with CONFIG_LINUX. Setting the property to "false"
will then only fail in corner cases -- for example on very old kernels
or when memory overcommit was completely disabled by the admin.

Reviewed-by: default avatarPeter Xu <peterx@redhat.com>
Reviewed-by: default avatarEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: default avatarMarkus Armbruster <armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: default avatarDavid Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-11-david@redhat.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      9181fb70
  11. May 02, 2021
  13. Feb 18, 2021
  15. Feb 01, 2021
  17. Sep 18, 2020
  19. Sep 09, 2020
  21. Jul 10, 2020
    • Markus Armbruster's avatar
      error: Eliminate error_propagate() with Coccinelle, part 1 · 668f62ec
      Markus Armbruster authored 
      
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away.  Convert

    if (!foo(..., &err)) {
        ...
        error_propagate(errp, err);
        ...
        return ...
    }

to

    if (!foo(..., errp)) {
        ...
        ...
        return ...
    }

where nothing else needs @err.  Coccinelle script:

    @rule1 forall@
    identifier fun, err, errp, lbl;
    expression list args, args2;
    binary operator op;
    constant c1, c2;
    symbol false;
    @@
         if (
    (
    -        fun(args, &err, args2)
    +        fun(args, errp, args2)
    |
    -        !fun(args, &err, args2)
    +        !fun(args, errp, args2)
    |
    -        fun(args, &err, args2) op c1
    +        fun(args, errp, args2) op c1
    )
            )
         {
             ... when != err
                 when != lbl:
                 when strict
    -        error_propagate(errp, err);
             ... when != err
    (
             return;
    |
             return c2;
    |
             return false;
    )
         }

    @rule2 forall@
    identifier fun, err, errp, lbl;
    expression list args, args2;
    expression var;
    binary operator op;
    constant c1, c2;
    symbol false;
    @@
    -    var = fun(args, &err, args2);
    +    var = fun(args, errp, args2);
         ... when != err
         if (
    (
             var
    |
             !var
    |
             var op c1
    )
            )
         {
             ... when != err
                 when != lbl:
                 when strict
    -        error_propagate(errp, err);
             ... when != err
    (
             return;
    |
             return c2;
    |
             return false;
    |
             return var;
    )
         }

    @depends on rule1 || rule2@
    identifier err;
    @@
    -    Error *err = NULL;
         ... when != err

Not exactly elegant, I'm afraid.

The "when != lbl:" is necessary to avoid transforming

         if (fun(args, &err)) {
             goto out
         }
         ...
     out:
         error_propagate(errp, err);

even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().

Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly.  I don't know what exactly "when strict" does, only that
it helps here.

The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err".  For
an example where it's too narrow, see vfio_intx_enable().

Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there.  Converted manually.

Line breaks tidied up manually.  One nested declaration of @local_err
deleted manually.  Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.

Signed-off-by: default avatarMarkus Armbruster <armbru@redhat.com>
Reviewed-by: default avatarEric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
      668f62ec
    • Markus Armbruster's avatar
      error: Avoid unnecessary error_propagate() after error_setg() · dcfe4805
      Markus Armbruster authored 
      
Replace

    error_setg(&err, ...);
    error_propagate(errp, err);

by

    error_setg(errp, ...);

Related pattern:

    if (...) {
        error_setg(&err, ...);
        goto out;
    }
    ...
 out:
    error_propagate(errp, err);
    return;

When all paths to label out are that way, replace by

    if (...) {
        error_setg(errp, ...);
        return;
    }

and delete the label along with the error_propagate().

When we have at most one other path that actually needs to propagate,
and maybe one at the end that where propagation is unnecessary, e.g.

    foo(..., &err);
    if (err) {
        goto out;
    }
    ...
    bar(..., &err);
 out:
    error_propagate(errp, err);
    return;

move the error_propagate() to where it's needed, like

    if (...) {
        foo(..., &err);
        error_propagate(errp, err);
        return;
    }
    ...
    bar(..., errp);
    return;

and transform the error_setg() as above.

In some places, the transformation results in obviously unnecessary
error_propagate().  The next few commits will eliminate them.

Bonus: the elimination of gotos will make later patches in this series
easier to review.

Candidates for conversion tracked down with this Coccinelle script:

    @@
    identifier err, errp;
    expression list args;
    @@
    -    error_setg(&err, args);
    +    error_setg(errp, args);
         ... when != err
         error_propagate(errp, err);

Signed-off-by: default avatarMarkus Armbruster <armbru@redhat.com>
Reviewed-by: default avatarEric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-34-armbru@redhat.com>
      dcfe4805
    • Markus Armbruster's avatar
      qapi: Use returned bool to check for failure, Coccinelle part · 62a35aaa
      Markus Armbruster authored 
      
The previous commit enables conversion of

    visit_foo(..., &err);
    if (err) {
        ...
    }

to

    if (!visit_foo(..., errp)) {
        ...
    }

for visitor functions that now return true / false on success / error.
Coccinelle script:

    @@
    identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*";
    expression list args;
    typedef Error;
    Error *err;
    @@
    -    fun(args, &err);
    -    if (err)
    +    if (!fun(args, &err))
         {
             ...
         }

A few line breaks tidied up manually.

Signed-off-by: default avatarMarkus Armbruster <armbru@redhat.com>
Reviewed-by: default avatarEric Blake <eblake@redhat.com>
Reviewed-by: default avatarVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-19-armbru@redhat.com>
      62a35aaa
  23. May 15, 2020
    • Markus Armbruster's avatar
      qom: Drop parameter @errp of object_property_add() & friends · d2623129
      Markus Armbruster authored 
      
The only way object_property_add() can fail is when a property with
the same name already exists.  Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.

Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent.  Parentage is
also under program control, so this is a programming error, too.

We have a bit over 500 callers.  Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.

The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.

Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.  ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.

When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.

Drop parameter @errp and assert the preconditions instead.

There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification".  Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().

Signed-off-by: default avatarMarkus Armbruster <armbru@redhat.com>
Reviewed-by: default avatarEric Blake <eblake@redhat.com>
Reviewed-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
      d2623129
  25. Feb 19, 2020
    • Igor Mammedov's avatar
      hostmem: fix strict bind policy · 4ebc74db
      Igor Mammedov authored 
      
When option -mem-prealloc is used with one or more memory-backend
objects, created backends may not obey configured bind policy or
creation may fail after kernel attempts to move pages according
to bind policy.
Reason is in file_ram_alloc(), which will pre-allocate
any descriptor based RAM if global mem_prealloc != 0 and that
happens way before bind policy is applied to memory range.

One way to fix it would be to extend memory_region_foo() API
and add more invariants that could broken later due implicit
dependencies that's hard to track.

Another approach is to drop adhoc main RAM allocation and
consolidate it around memory-backend. That allows to have
single place that allocates guest RAM (main and memdev)
in the same way and then global mem_prealloc could be
replaced by backend's property[s] that will affect created
memory-backend objects but only in correct order this time.

With main RAM now converted to hostmem backends, there is no
point in keeping global mem_prealloc around, so alias
 -mem-prealloc to "memory-backend.prealloc=on"
machine compat[*] property and make mem_prealloc a local
variable to only stir registration of compat property.

*) currently user accessible -global works only with DEVICE
   based objects and extra work is needed to make it work
   with hostmem backends. But that is convenience option
   and out of scope of this already huge refactoring.
   Hence machine compat properties were used.

Signed-off-by: default avatarIgor Mammedov <imammedo@redhat.com>
Message-Id: <20200219160953.13771-78-imammedo@redhat.com>
      4ebc74db
    • Igor Mammedov's avatar
      machine: alias -mem-path and -mem-prealloc into memory-foo backend · 900c0ba3
      Igor Mammedov authored 
      
Allow machine to opt in for hostmem backend based initial RAM
even if user uses old -mem-path/prealloc options by providing
  MachineClass::default_ram_id
Follow up patches will incrementally convert machines to new API,
by dropping memory_region_allocate_system_memory() and setting
default_ram_id that board used to use before conversion to keep
migration stream the same.

Signed-off-by: default avatarIgor Mammedov <imammedo@redhat.com>
Message-Id: <20200219160953.13771-4-imammedo@redhat.com>
      900c0ba3
  27. Sep 16, 2019
    • Stefan Hajnoczi's avatar
      memory: fetch pmem size in get_file_size() · 72d41eb4
      Stefan Hajnoczi authored 
      
Neither stat(2) nor lseek(2) report the size of Linux devdax pmem
character device nodes.  Commit 314aec4a
("hostmem-file: reject invalid pmem file sizes") added code to
hostmem-file.c to fetch the size from sysfs and compare against the
user-provided size=NUM parameter:

  if (backend->size > size) {
      error_setg(errp, "size property %" PRIu64 " is larger than "
                 "pmem file \"%s\" size %" PRIu64, backend->size,
                 fb->mem_path, size);
      return;
  }

It turns out that exec.c:qemu_ram_alloc_from_fd() already has an
equivalent size check but it skips devdax pmem character devices because
lseek(2) returns 0:

  if (file_size > 0 && file_size < size) {
      error_setg(errp, "backing store %s size 0x%" PRIx64
                 " does not match 'size' option 0x" RAM_ADDR_FMT,
                 mem_path, file_size, size);
      return NULL;
  }

This patch moves the devdax pmem file size code into get_file_size() so
that we check the memory size in a single place:
qemu_ram_alloc_from_fd().  This simplifies the code and makes it more
general.

This also fixes the problem that hostmem-file only checks the devdax
pmem file size when the pmem=on parameter is given.  An unchecked
size=NUM parameter can lead to SIGBUS in QEMU so we must always fetch
the file size for Linux devdax pmem character device nodes.

Signed-off-by: default avatarStefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190830093056.12572-1-stefanha@redhat.com>
Reviewed-by: default avatarEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      72d41eb4
  29. Sep 03, 2019
    • Stefan Hajnoczi's avatar
      hostmem-file: fix pmem file size check · 7faae95e
      Stefan Hajnoczi authored 
      
Commit 314aec4a ("hostmem-file: reject
invalid pmem file sizes") added a file size check that verifies the
hostmem object's size parameter against the actual devdax pmem file.
This is useful because getting the size wrong results in confusing
errors inside the guest.

However, the code doesn't work properly for files where struct
stat::st_size is zero.  Hostmem-file's ->alloc() function returns early
without setting an Error, causing the following assertion failure:

  qemu/memory.c:2215: memory_region_get_ram_ptr: Assertion `mr->ram_block' failed.

This patch handles the case where qemu_get_pmem_size() returns 0 but
there is no error.

Fixes: 314aec4a
Signed-off-by: default avatarStefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190823135632.25010-1-stefanha@redhat.com>
Signed-off-by: default avatarEduardo Habkost <ehabkost@redhat.com>
      7faae95e
  31. Jun 12, 2019
  33. Mar 11, 2019
  35. Mar 06, 2019
  37. Jan 28, 2019
  39. Jan 07, 2019
    • Marc-André Lureau's avatar
      hostmem: use object id for memory region name with >= 4.0 · fa0cb34d
      Marc-André Lureau authored 
      
hostmem-file and hostmem-memfd use the whole object path for the
memory region name, and hostname-ram uses only the path component (the
object id, or canonical path basename):

qemu -m 1024 -object memory-backend-file,id=mem,size=1G,mem-path=/tmp/foo -numa node,memdev=mem -monitor stdio
(qemu) info ramblock
              Block Name    PSize              Offset               Used              Total
            /objects/mem    4 KiB  0x0000000000000000 0x0000000040000000 0x0000000040000000

qemu -m 1024 -object memory-backend-memfd,id=mem,size=1G -numa node,memdev=mem -monitor stdio
(qemu) info ramblock
              Block Name    PSize              Offset               Used              Total
            /objects/mem    4 KiB  0x0000000000000000 0x0000000040000000 0x0000000040000000

qemu -m 1024 -object memory-backend-ram,id=mem,size=1G -numa node,memdev=mem -monitor stdio
(qemu) info ramblock
              Block Name    PSize              Offset               Used              Total
                     mem    4 KiB  0x0000000000000000 0x0000000040000000 0x0000000040000000

For consistency, change to use object id for -file and -memfd as well
with >= 4.0.

Having a consistent naming allows to migrate to different hostmem
backends.

Signed-off-by: default avatarMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: default avatarIgor Mammedov <imammedo@redhat.com>
Acked-by: default avatarEduardo Habkost <ehabkost@redhat.com>
      fa0cb34d
  41. Dec 11, 2018
  43. Nov 28, 2018
  45. Oct 24, 2018
  47. Oct 02, 2018
  49. Aug 10, 2018
  51. Feb 19, 2018
    • Marcel Apfelbaum's avatar
      mem: add share parameter to memory-backend-ram · 06329cce
      Marcel Apfelbaum authored 
      
Currently only file backed memory backend can
be created with a "share" flag in order to allow
sharing guest RAM with other processes in the host.

Add the "share" flag also to RAM Memory Backend
in order to allow remapping parts of the guest RAM
to different host virtual addresses. This is needed
by the RDMA devices in order to remap non-contiguous
QEMU virtual addresses to a contiguous virtual address range.

Moved the "share" flag to the Host Memory base class,
modified phys_mem_alloc to include the new parameter
and a new interface memory_region_init_ram_shared_nomigrate.

There are no functional changes if the new flag is not used.

Reviewed-by: default avatarEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: default avatarMarcel Apfelbaum <marcel@redhat.com>
      06329cce
  53. Jan 19, 2018
    • Haozhong Zhang's avatar
      hostmem-file: add "align" option · 98376843
      Haozhong Zhang authored 
      
When mmap(2) the backend files, QEMU uses the host page size
(getpagesize(2)) by default as the alignment of mapping address.
However, some backends may require alignments different than the page
size. For example, mmap a device DAX (e.g., /dev/dax0.0) on Linux
kernel 4.13 to an address, which is 4K-aligned but not 2M-aligned,
fails with a kernel message like

[617494.969768] dax dax0.0: qemu-system-x86: dax_mmap: fail, unaligned vma (0x7fa37c579000 - 0x7fa43c579000, 0x1fffff)

Because there is no common approach to get such alignment requirement,
we add the 'align' option to 'memory-backend-file', so that users or
management utils, which have enough knowledge about the backend, can
specify a proper alignment via this option.

Signed-off-by: default avatarHaozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171211072806.2812-2-haozhong.zhang@intel.com>
Reviewed-by: default avatarMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: default avatarStefan Hajnoczi <stefanha@redhat.com>
[ehabkost: fixed typo, fixed error_setg() format string]
Signed-off-by: default avatarEduardo Habkost <ehabkost@redhat.com>
      98376843
  55. Sep 19, 2017
  57. Apr 20, 2017
  59. Oct 17, 2016
  61. Apr 15, 2016
  63. Apr 07, 2016
  65. Mar 22, 2016
    • Markus Armbruster's avatar
      include/qemu/osdep.h: Don't include qapi/error.h · da34e65c
      Markus Armbruster authored 
      
Commit 57cb38b3 included qapi/error.h into qemu/osdep.h to get the
Error typedef.  Since then, we've moved to include qemu/osdep.h
everywhere.  Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h.  That's in excess of
100KiB of crap most .c files don't actually need.

Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h.  Include qapi/error.h in .c files that need it and don't
get it now.  Include qapi-types.h in qom/object.h for uint16List.

Update scripts/clean-includes accordingly.  Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h.  Update the list of includes in the qemu/osdep.h
comment quoted above similarly.

This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third.  Unfortunately, the number depending on
qapi-types.h shrinks only a little.  More work is needed for that one.

Signed-off-by: default avatarMarkus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      da34e65c