Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org

Postcopy detects accesses to pages that haven't been transferred yet
using userfaultfd, and it causes exceptions on pages that are 'not
present'.
Ballooning also causes pages to be marked as 'not present' when the
guest inflates the balloon.
Potentially a balloon could be inflated to discard pages that are
currently inflight during postcopy and that may be arriving at about
the same time.

To avoid this confusion, disable ballooning during postcopy.

When disabled we drop balloon requests from the guest.  Since ballooning
is generally initiated by the host, the management system should avoid
initiating any balloon instructions to the guest during migration,
although it's not possible to know how long it would take a guest to
process a request made prior to the start of migration.
Guest initiated ballooning will not know if it's really freed a page
of host memory or not.

Queueing the requests until after migration would be nice, but is
non-trivial, since the set of inflate/deflate requests have to
be compared with the state of the page to know what the final
outcome is allowed to be.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>

In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>

These macros expand into error class enumeration constant, comma,
string.  Unclean.  Has been that way since commit 13f59ae8.

The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.

Clean up as follows:

* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
  delete it from the QERR_ macro.  No change after preprocessing.

* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
  error_setg(...).  Again, no change after preprocessing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>

A VM supports only one balloon device, but due to several changes
in infrastructure the error message got messed up when trying
to add a second device. Fix it.

Before this fix

Command-line:

qemu-qmp: -device virtio-balloon-pci,id=balloon0: Another balloon device already registered
qemu-qmp: -device virtio-balloon-pci,id=balloon0: Adding balloon handler failed
qemu-qmp: -device virtio-balloon-pci,id=balloon0: Device 'virtio-balloon-pci' could not be initialized

HMP:

Another balloon device already registered
Adding balloon handler failed
Device 'virtio-balloon-pci' could not be initialized

QMP:

{ "execute": "device_add", "arguments": { "driver": "virtio-balloon-pci", "id": "balloon0" } }
{
	"error": {
		"class": "GenericError",
		"desc": "Adding balloon handler failed"
	}
}

After this fix

Command-line:

qemu-qmp: -device virtio-balloon-pci,id=balloon0: Only one balloon device is supported
qemu-qmp: -device virtio-balloon-pci,id=balloon0: Device 'virtio-balloon-pci' could not be initialized

HMP:

(qemu) device_add virtio-balloon-pci,id=balloon0
Only one balloon device is supported
Device 'virtio-balloon-pci' could not be initialized
(qemu)

QMP:

{ "execute": "device_add",
          "arguments": { "driver": "virtio-balloon-pci", "id": "balloon0" } }
{
    "error": {
        "class": "GenericError",
        "desc": "Only one balloon device is supported"
    }
}

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

Commit 422e0501 introduced a typo (unless removing an 'o' from
balloon is how you deflate it?)

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>

The QERR_ macros are leftovers from the days of "rich" error objects.
They're used with error_set() and qerror_report(), and expand into the
first *two* arguments.  This trickiness has become pointless.  Clean
up the balloon ones.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

... and simplify a bit.  Permits factoring out common error checks in
the next commit.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

After setting a balloon target value, applications have to
continually poll 'query-balloon' to determine whether the
guest has reacted to this request. The virtio-balloon backend
knows exactly when the guest has reacted though, and thus it
is possible to emit a JSON event to tell the mgmt application
whenever the guest balloon changes.

This introduces a new 'qemu_balloon_changed()' API which is
to be called by balloon driver backends, whenever they have
a change in balloon value. This takes the 'actual' balloon
value, as would be found in the BalloonInfo struct.

The qemu_balloon_change API emits a JSON monitor event which
looks like:

  {"timestamp": {"seconds": 1337162462, "microseconds": 814521},
   "event": "BALLOON_CHANGE", "data": {"actual": 944766976}}

* balloon.c, balloon.h: Introduce qemu_balloon_changed() for
  emitting balloon change events on the monitor
* hw/virtio-balloon.c: Invoke qemu_balloon_changed() whenever
  the guest changes the balloon actual value
* monitor.c, monitor.h: Define QEVENT_BALLOON_CHANGE

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>

Commit d72f3264 forgot to convert a call from qerror_report() to
error_set(). Fix it.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>

Note that the command being dropped uses the deprecated MONITOR_CMD_ASYNC
API, but the new command is a regular synchronous command. There shouldn't
be visible differences though, as MONITOR_CMD_ASYNC is internal only.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>

Please, note that some of the code supporting memory statistics is
still around (eg. virtio_balloon_receive_stats() and reset_stats()).

Also, the qmp_query_balloon() function is synchronous and thus doesn't
make any use of the (not fully working) monitor's asynchronous command
support (the old non-qapi implementation did).

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>

When a balloon device gets unplugged, allow the balloon handlers to be
freed.

Reported-by: Shaolong Hu <shu@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Negative balloon values don't make sense, reject them and throw a qerror
with QERR_INVALID_PARAMETER_VALUE.

Reported-by: Mike Cao <bcao@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>

Multiple balloon devices don't make sense; disallow more than one
registration attempt to register handlers.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>

Signed-off-by: Amit Shah <amit.shah@redhat.com>

Passing on '0' as ballooning target to indicate retrieval of stats is
bad API.  It also makes 'balloon 0' in the monitor cause a segfault.
Have two different functions handle the different functionality instead.

Detailed explanation from Markus's review:

1. do_info_balloon() is an info_async() method.  It receives a callback
   with argument, to be called exactly once (callback frees the
   argument).  It passes the callback via qemu_balloon_status() and
   indirectly through qemu_balloon_event to virtio_balloon_to_target().

   virtio_balloon_to_target() executes its balloon stats half.  It
   stores the callback in the device state.

   If it can't send a stats request, it resets stats and calls the
   callback right away.

   Else, it sends a stats request.  The device model runs the callback
   when it receives the answer.

   Works.

2. do_balloon() is a cmd_async() method.  It receives a callback with
   argument, to be called when the command completes.  do_balloon()
   calls it right before it succeeds.  Odd, but should work.

   Nevertheless, it passes the callback on via qemu_ballon() and
   indirectly through qemu_balloon_event to virtio_balloon_to_target().

   a. If the argument is non-zero, virtio_balloon_to_target() executes
      its balloon half, which doesn't use the callback in any way.

      Odd, but works.

   b. If the argument is zero, virtio_balloon_to_target() executes its
      balloon stats half, just like in 1.  It either calls the callback
      right away, or arranges for it to be called later.

      Thus, the callback runs twice: use after free and double free.

Test case: start with -S -device virtio-balloon, execute "balloon 0" in
human monitor.  Runs the callback first from virtio_balloon_to_target(),
then again from do_balloon().

Reported-by: Mike Cao <bcao@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>

Replace:
  if (foo) {
    ...
  } else {
    return 0;
  }

by

  if (!foo) {
    return 0;
  }
  ...

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>

balloon.h had function declarations for a couple of functions that are
local to balloon.c.  Make them static.

Drop the 'qemu_' prefix for balloon.c-local variables, and make them
static.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>

Remove unused sysemu.h include directives to speed up build
with the following patches.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>