Conflicts:
	vl.c

When not specifying a cluster size on the command line, qemu-img printed
a cluster size of 0:

    Formatting '/tmp/test.qcow2', fmt=qcow2 size=67108864
    encryption=off cluster_size=0

This patch adds the default cluster size to the QEMUOptionParameter list, so
that it displays the default value that is used.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Block drivers that don't support creating images don't have a size option. Fail
gracefully instead of segfaulting when trying to access the option's value.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>

This fixes memory leaks that may be caused by I/O errors during L1 table growth
(can happen during save_vm) and in qemu-img check.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Reviewed-by: Christian Brunner <chb@muc.de>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

If scheduling fails, the number of outstanding I/Os must be correct,
or there will be a hang when waiting for everything to be flushed.

Reviewed-by: Christian Brunner <chb@muc.de>
Reported-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

The new format is rbd:pool/image[@snapshot][:option1=value1[:option2=value2...]]
Each option is used to configure rados, and may be any Ceph option, or "conf".
The "conf" option specifies a Ceph configuration file to read.

This allows rbd volumes from more than one Ceph cluster to be used by
specifying different monitor addresses, as well as having different
logging levels or locations for different volumes.

Reviewed-by: Christian Brunner <chb@muc.de>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

librbd stacks on top of librados to provide access
to rbd images.

Using librbd simplifies the qemu code, and allows
qemu to use new versions of the rbd format
with few (if any) changes.

Reviewed-by: Christian Brunner <chb@muc.de>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

use the correct way to get the size of a disk device or partition

From: Adam Hamsik <haad@netbsd.org>
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

On NetBSD a userland process is better with the character device
interface. In addition, a block device can't be opened twice; if a Xen
backend opens it, qemu can't and vice-versa.

Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

The vmdk code is sloppy when handling the header descriptor during
creation of an image. Fix all header accesses in the create path to
either store native endianness or convert it when appropriate.

Reported-by: Yury Tsarev <ytsarev@novell.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Change BDRV_O_NOCACHE to only imply bypassing the host OS file cache,
but no writeback semantics.  All existing callers are changed to also
specify BDRV_O_CACHE_WB to give them writeback semantics.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

BM_STATUS_INT is automatically set during ide_set_irq(), there's no reason to
set it manually in addition.

There is even one case where the interrupt status bit was set, but no IRQ was
raised. This is when the PRD table was reached but there is more data to
transfer. The correct behaviour for this case is not to set BM_STATUS_INT.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>

This module has no target dependencies (except for target_phys_addr_t
size) and can thus be built as part of libhw.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>

While trying to use qemu -cpu pentium3 to test for incorrect uses of certain
SSE2 instructions, I found that QEMU allowed the mfence and lfence
instructions to be executed even though Pentium 3 doesn't support them.

According to the processor specs (and experience on a real Pentium 3), these
instructions are only available with SSE2, but QEMU is checking for SSE.  The
check for the related sfence instruction is correct (it works with SSE).

This trival patch fixes the test.

Signed-off-by: Martin Simmons <martin@lispworks.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>

When using -net user,guestfwd=... Qemu immediately complains about the id
being in invalid format. This is because we pass in an id that contains a
colon, while the id restrictions don't allow colons.

This patch changes the colon into a dot, making guestfwd work again.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>

This patch removes all references to signal.h when qemu-common.h is included
as they become redundant.

Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Fix the following warning by including signal.h directly in qemu-common.h
----8<----
iohandler.c: In function ‘qemu_init_child_watch’:
iohandler.c:172: warning: implicit declaration of function ‘sigaction’
iohandler.c:172: warning: nested extern declaration of ‘sigaction’
----8<----

Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>

This patch adds a dummy legacy ISA device whose responsibility is to
deploy sgabios, an option rom for a serial graphics adapter.
The proposal is that this device is always-on when -nographics,
but can otherwise be enable in any setup when -device sga is used.

[v2: suggestions on qdev by Markus ]
[v3: cleanups and documentation, per list suggestions ]

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Currently a NULL token list will crash the parser, instead we have it
pass back a NULL QObject.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

This allows a JSON_ERROR state to be passed to the streamer to force a
flush of the current tokens and pass a NULL token list to the parser
rather that have it churn on bad data. (Alternatively we could just not
pass it to the parser at all, but it may be useful to push there errors
up the stack. NULL token lists are not currently handled by the parser,
the next patch will address that)

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Currently when we reach an error state we effectively flush everything
fed to the lexer, which can put us in a state where we keep feeding
tokens into the parser at arbitrary offsets in the stream. This makes it
difficult for the lexer/tokenizer/parser to get back in sync when bad
input is made by the client.

With these changes we emit an error state/token up to the tokenizer as
soon as we reach an error state, and continue processing any data passed
in rather than bailing out. The reset token will be used to reset the
tokenizer and parser, such that they'll recover state as soon as the
lexer begins generating valid token sequences again.

We also map chr(192,193,245-255) to an error state here, since they are
invalid UTF-8 characters. QMP guest proxy/agent will use chr(255) to
force a flush/reset of previous input for reliable delivery of certain
events, so also we document that thoroughly here.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Currently we flush the lexer by passing in a NULL character. This
generally forces the lexer to go to the corresponding TERMINAL() state
for whatever token type it is currently parsing, emits the token to the
parser, then puts the lexer back into IN_START state. However, since a
NULL character causes char_consumed to be 0, we always do a second pass
after this, which puts us in the IN_ERROR state. Fix this behavior by
adding a "flush" flag that tells the lexer not to do a more than 1
iteration.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Once we detect a malformed message, make sure to reset our state.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

New error-handling framework that allows for exception-like error
propagation.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Will be used by new error propagation framework to convert Error objects
into human-readable form.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Refactor non-QError-specific bits out of qerror_human() into general
function that can be used by the error_get_pretty() analogue in the
new error-propagation framework.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Document more bus addresses.

Update for bugs fixed.

Describe where exactly the -drive options go.

Update for recent split of qdev ide-drive into ide-{cd,hd},
scsi-disk into scsi-{cd,hd}.

Document scsi-hd's removable property only for usb-storage, because
that's where it's used.

Fix description of -global isa.fdc.

Document usb-storage lossage.

Clean up misleading description of network device's split into guest
and host part.

Document -vga's machine dependence.

New qdevs: virtconsole, qxl-vga, isa-vga, intel-hda, usb-ccid

Update for changed pci-assign property iommu.

New section "Default Devices".

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Switch no_user off and make it suppress the default VGA.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Commit 85097db6 changed the timing when kvm_allowed is set until after
kvm is initialized.  During initialization, the ioeventfd initialization code
checks kvm_enabled() and after this change, ioeventfd is effectively disabled.

This causes a significant regression in performance.

Fix this by setting kvm_allowed before calling init.

Reported-by: Khoa Huynh <khoa@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>