Delta value must be updated on period/freq change, otherwise running timer
would be restarted (counter reloaded with old delta). Only m68k/mcf520x
and arm/arm_timer devices are currently doing freq change correctly, i.e.
stopping the timer. Perform delta update to fix affected devices and
eliminate potential further mistakes.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 4987ef5fdc128bb9a744fd794d3f609135c6a39c.1464367869.git.digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ptimer_get_count() might be called while QEMU timer already been expired.
In that case ptimer would return counter = 0, which might be undesirable
in case of polled timer. Do counter wrap around for periodic timer to keep
it distributed. In order to achieve more accurate emulation behaviour of
certain hardware, don't perform wrap around when in icount mode and return
counter = 0 in that case (that doesn't affect polled counter distribution).

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 4ce381c7d24d85d165ff251d2875d16a4b6a5c04.1464367869.git.digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Multiple issues here related to the timer with a adjusted .limit value:

1) ptimer_get_count() returns incorrect counter value for the disabled
timer after loading the counter with a small value, because adjusted limit
value is used instead of the original.

For instance:
    1) ptimer_stop(t)
    2) ptimer_set_period(t, 1)
    3) ptimer_set_limit(t, 0, 1)
    4) ptimer_get_count(t) <-- would return 10000 instead of 0

2) ptimer_get_count() might return incorrect value for the timer running
with a adjusted limit value.

For instance:
    1) ptimer_stop(t)
    2) ptimer_set_period(t, 1)
    3) ptimer_set_limit(t, 10, 1)
    4) ptimer_run(t)
    5) ptimer_get_count(t) <-- might return value > 10

3) Neither ptimer_set_period() nor ptimer_set_freq() are adjusting the
limit value, so it is still possible to make timer timeout value
arbitrary small.

For instance:
    1) ptimer_set_period(t, 10000)
    2) ptimer_set_limit(t, 1, 0)
    3) ptimer_set_period(t, 1) <-- bypass limit correction

Fix all of the above issues by adjusting timer period instead of the limit.
Perform the adjustment for periodic timer only. Use the delta value instead
of the limit to make decision whether adjustment is required, as limit could
be altered while timer is running, resulting in incorrect value returned by
ptimer_get_count.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: cd141f74f5737480ec586b9c7d18cce1d69884e2.1464367869.git.digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Use the in kernel GIC model when running with KVM enabled.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-5-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Delay the realization of the GIC until after CPUs are
realized. This is needed for KVM as the in-kernel GIC
model will fail if it is realized with no available CPUs.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-4-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The way we currently model the RPU subsystem is of quite
limited use. In addition to that, it causes problems for
KVM and for GDB debugging.

Make the RPU optional by adding a has_rpu property and
default to having it disabled.

This changes the default setup from having the RPU to not
longer having it.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-3-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Add a secure prop to en/disable ARM Security Extensions.
This is particularly useful for KVM runs.

Default to disabled to match the behavior of KVM.

This changes the default setup from having the ARM Security
Extensions to not longer having them.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

If you try to gic-version=host with TCG on a KVM aarch64 host,
qemu segfaults, since host requires KVM APIs.

Explicitly reject gic-version=host if KVM is not enabled

https://bugzilla.redhat.com/show_bug.cgi?id=1339977


Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: b1b3b0dd143b7995a7f4062966b80a2cf3e3c71e.1464273085.git.crobinso@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers
directly connected to the APB bus. They can be programmed as master or
slave but the propopsed model only supports the master mode.

On the TODO list, we also have :

 - improve and harden the state machine.
 - bus recovery support (used by the Linux driver).
 - transfer mode state machine bits. this is not strictly necessary as
   it is mostly used for debug. The bus busy bit is deducted from the
   I2C core engine of qemu.
 - support of the pool buffer: 2048 bytes of internal SRAM (not used
   by the Linux driver).

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org
[PMM: removed unused functions aspeed_i2c_bus_get_state() and
 aspeed_i2c_bus_set_state()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Treat non-secure accesses to registers and bits in registers of secure
interrupts as RAZ/WI.

Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Message-id: 1464273945-2055-1-git-send-email-jens.wiklander@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Set the MMIO range limit field to 'base + size - 1' as required.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1463856217-17969-1-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Remove some incorrect code from arm_cpu_do_interrupt_aarch64()
which attempts to set the IL bit in the syndrome register based
on the value of env->thumb. This is wrong in several ways:
 * IL doesn't indicate Thumb-vs-ARM, it indicates instruction
   length (which may be 16 or 32 for Thumb and is always 32 for ARM)
 * not every syndrome format uses IL like this -- for some IL is
   always set, and for some it is always clear
 * the code is changing esr_el[new_el] even for interrupt entry,
   which is not supposed to modify ESR_ELx at all

Delete the code, and instead rely on the syndrome value in
env->exception.syndrome having already been set up with the
correct value of IL.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1463487258-27468-3-git-send-email-peter.maydell@linaro.org

For some exception syndrome types, the IL bit should always be set.
This includes the instruction abort, watchpoint and software step
syndrome types; add the missing ARM_EL_IL bit to the syndrome
values returned by syn_insn_abort(), syn_swstep() and syn_watchpoint().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1463487258-27468-2-git-send-email-peter.maydell@linaro.org

Add support for generating the ISS (Instruction Specific Syndrome) for
Data Abort exceptions taken from AArch64.
These syndromes are used by hypervisors for example to trap and emulate
memory accesses.

We save the decoded data out-of-band with the TBs at translation time.
When exceptions hit, the extra data attached to the TB is used to
recreate the state needed to encode instruction syndromes.
This avoids the need to emit moves with every load/store.

Based on a suggestion from Peter Maydell.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1462464601-10888-2-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Add the Hypervisor System Trap Register for EL2.

This register is used early in the Linux boot and without it the kernel
aborts with a "Synchronous Abort" error.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: ea5aae4b10283de4705b864fe9d4bd2eaddaacae.1463174342.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

readdir_r() to readdir() conversion, various minor cleanups

# gpg: Signature made Mon 06 Jun 2016 10:52:52 BST
# gpg:                using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <gkurz@fr.ibm.com>"
# gpg:                 aka "Greg Kurz <groug@free.fr>"
# gpg:                 aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg:                 aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg:                 aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg:                 aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894  DBA2 02FC 3AEB 0101 DBC2

* remotes/gkurz/tags/for-upstream:
  9p: switch back to readdir()
  9p: add locking to V9fsDir
  9p: introduce the V9fsDir type
  9p: drop useless out: label
  9p: drop useless inclusion of hw/i386/pc.h
  9p/fsdev: remove obsolete references to virtio
  9p: some more cleanup in #include directives

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

virtio-gpu: scanout fix, live migration support
vmsvga: security fixes

# gpg: Signature made Mon 06 Jun 2016 08:05:00 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vga-20160606-1:
  virtio-gpu: add live migration support
  vmsvga: don't process more than 1024 fifo commands at once
  vmsvga: shadow fifo registers
  vmsvga: add more fifo checks
  vmsvga: move fifo sanity checks to vmsvga_fifo_length
  virtio-gpu: fix scanout rectangles

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Commit fcaafb10 accidentally broke reads from
scsi-disk devices when being updated from its original form to use the new
byte-based block functions. Add the extra missing sector to offset conversion
in order to restore read functionality.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1464931021-25117-1-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

audio: pa volume fix, some qomifying.

# gpg: Signature made Mon 06 Jun 2016 08:01:21 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-audio-20160606-1:
  hw/audio: QOM'ify milkymist-ac97.c
  hw/audio: QOM'ify intel-hda
  hw/audio: QOM cleanup for intel-hda
  hw/audio: QOM'ify cs4231.c
  audio: pa: Set volume of recording stream instead of recording device

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Check address ranges for disassembly

# gpg: Signature made Sun 05 Jun 2016 17:30:28 BST
# gpg:                using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-tgt-20160605:
  target-*: dfilter support for in_asm

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

While waiting for a gdb response, or while sending an acknowledgement
there is not much to do, so do not mark the socket as non-blocking to
avoid a busy loop while paused at gdb. This only affects the user-mode
emulation (qemu-arm -g 1234 ./a.out).

Note that this issue was reported before at
https://lists.nongnu.org/archive/html/qemu-devel/2013-02/msg02277.html

.

While at it, close the gdb client fd on EOF or error while reading.

Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

This patch changes the 9p code to use readdir() again instead of
readdir_r(), which is deprecated in glibc 2.24.

All the locking was put in place by a previous patch.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>

If several threads concurrently call readdir() with the same directory
stream pointer, it is possible that they all get a pointer to the same
dirent structure, whose content is overwritten each time readdir() is
called.

We must thus serialize accesses to the dirent structure.

This may be achieved with a mutex like below:

lock_mutex();

readdir();

// work with the dirent

unlock_mutex();

This patch adds all the locking, to prepare the switch to readdir().

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>

If we are to switch back to readdir(), we need a more complex type than
DIR * to be able to serialize concurrent accesses to the directory stream.

This patch introduces a placeholder type and fixes all users.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>

Most of the 9p code is now virtio agnostic. This patch does a final cleanup:
- drop references to Virtio from the header comments
- fix includes

Also drop a couple of leading empty lines while here.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>

The "9p-attr.h" header isn't needed by 9p synth and virtio 9p.

While here, also drop last references to virtio from 9p synth since it is
now transport agnostic code.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>

This patch fixes used-uninitialized false
positive while compiling with ust tracing
backend plus gcc 4.6.3:

hw/net/e1000e.c: In function ‘e1000e_io_write’:
hw/net/e1000e.c:170:39: error: ‘idx’ may be used uninitialized in this function [-Werror=uninitialized]
hw/net/e1000e.c: In function ‘e1000e_io_read’:
hw/net/e1000e.c:145:35: error: ‘idx’ may be used uninitialized in this function [-Werror=uninitialized]
cc1: all warnings being treated as errors
make: *** [hw/net/e1000e.o] Error 1

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-id: 1465023763-10773-1-git-send-email-dmitry@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Store some additional state for cursor and resource backing storage,
so we can write out and reload things.  Implement vmsave+vmload for
2d mode.  Continue blocking live migration in 3d/virgl mode.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464009727-7753-1-git-send-email-kraxel@redhat.com

vmsvga_fifo_run is called in regular intervals (on each display update)
and will resume where it left off.  So we can simply exit the loop,
without having to worry about how processing will continue.

Fixes: CVE-2016-4453
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-5-git-send-email-kraxel@redhat.com

The fifo is normal ram.  So kvm vcpu threads and qemu iothread can
access the fifo in parallel without syncronization.  Which in turn
implies we can't use the fifo pointers in-place because the guest
can try changing them underneath us.  So add shadows for them, to
make sure the guest can't modify them after we've applied sanity
checks.

Fixes: CVE-2016-4454
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-4-git-send-email-kraxel@redhat.com

Make sure all fifo ptrs are within range.

Fixes: CVE-2016-4454
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-3-git-send-email-kraxel@redhat.com

Sanity checks are applied when the fifo is enabled by the guest
(SVGA_REG_CONFIG_DONE write).  Which doesn't help much if the guest
changes the fifo registers afterwards.  Move the checks to
vmsvga_fifo_length so they are done each time qemu is about to read
from the fifo.

Fixes: CVE-2016-4454
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-2-git-send-email-kraxel@redhat.com

The arm target was handled by 06486077, but other targets
were ignored.  This handles all the rest which actually support
disassembly (that is, skipping moxie and tilegx).

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

vnc: keyboard delay, colormap support
ui: misc bugfixes

# gpg: Signature made Fri 03 Jun 2016 08:02:32 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-ui-20160603-1:
  vnc: add configurable keyboard delay
  sdl2: skip init without outputs
  vnc: Add support for color map
  SDL2: add bgrx pixel format
  gtk: fix unchecked vc dereference
  ui: spice: Exit if gl=on EGL init fails
  ui: egl: Replace fprintf with error_report

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ust trace backend has limitation of maximum 10
arguments per event. Traces with more arguments
cannot be compiled for this backend.

Trace e1000e_rx_rss_ip6 introduced by previous
commits has 11 arguments and fails to compile with
ust trace backend.

This patch fixes the problem by splitting this
tracepoint into two successive tracepoints with
smaller number of arguments.

For more information see comment regarding TP_ARGS
in lttng/tracepoint.h:

/*
* TP_ARGS takes tuples of type, argument separated by a comma.
* It can take up to 10 tuples (which means that less than 10 tuples is
* fine too).
* Each tuple is also separated by a comma.
*/

Build log generated by this problem:

In file included from ./trace/generated-tracers.h:9:0,
                 from /home/travis/build/qemu/qemu/include/trace.h:4,
                 from util/oslib-posix.c:36:
./trace/generated-ust-provider.h:16556:3: error: unknown type name ‘_TP_EXPROTO_Bool’
In file included from /home/travis/build/qemu/qemu/include/trace.h:4:0,
                 from util/oslib-posix.c:36:
./trace/generated-tracers.h: In function ‘trace_e1000e_rx_rss_ip6’:
./trace/generated-tracers.h:8379:431: error: expected string literal before ‘_SDT_ASM_OPERANDS_ipv6_enabled’
./trace/generated-tracers.h:8379:431: error: implicit declaration of function ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=implicit-function-declaration]
./trace/generated-tracers.h:8379:431: error: nested extern declaration of ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=nested-externs]
cc1: all warnings being treated as errors
make: *** [util/oslib-posix.o] Error 1
make: *** Waiting for unfinished jobs....
In file included from ./trace/generated-tracers.h:9:0,
                 from /home/travis/build/qemu/qemu/include/trace.h:4,
                 from util/hbitmap.c:16:
./trace/generated-ust-provider.h:16556:3: error: unknown type name ‘_TP_EXPROTO_Bool’
In file included from /home/travis/build/qemu/qemu/include/trace.h:4:0,
                 from util/hbitmap.c:16:
./trace/generated-tracers.h: In function ‘trace_e1000e_rx_rss_ip6’:
./trace/generated-tracers.h:8379:431: error: expected string literal before ‘_SDT_ASM_OPERANDS_ipv6_enabled’
./trace/generated-tracers.h:8379:431: error: implicit declaration of function ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=implicit-function-declaration]
./trace/generated-tracers.h:8379:431: error: nested extern declaration of ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=nested-externs]
cc1: all warnings being treated as errors
make: *** [util/hbitmap.o] Error 1

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Message-id: 1464894748-27803-1-git-send-email-dmitry@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

* Drop the old SysBus init function and use instance_init
* Move AUD_open_in / AUD_open_out function into realize stage

Acked-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1463111220-30335-5-git-send-email-zxq_yx_007@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

* use DeviceClass::realize instead of DeviceClass::init

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1463111220-30335-4-git-send-email-zxq_yx_007@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drop the DO_UPCAST macro

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1463111220-30335-3-git-send-email-zxq_yx_007@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>