Update the binaries with the two reboot fixes from Eric Farman.

Signed-off-by: Thomas Huth <thuth@redhat.com>

A Linux binary will have the string "S390EP" at address 0x10008,
which is important in getting the guest up off the ground. In the
case of a reboot (specifically chreipl going to a new device),
we should defer to the PSW at address zero for the new config,
which will re-write "S390EP" from the new image.

Let's clear it out at this point so that a reipl to, say, a DASD
passthrough device drives the IPL path from scratch without disrupting
disrupting the order of operations for other boots.

Rather than hardcoding the address of this magic (again), let's
define it somewhere so that the two users are visibly related.

Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20201120160117.59366-3-farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

If, for example, we boot off a virtio device and chreipl to a vfio-ccw
device, the space at lowcore will be non-zero. We build a Read IPL CCW
at address zero, but it will have leftover PSW data that will conflict
with the Format-0 CCW being generated:

0x0: 00080000 80010000
       ------ Ccw0.cda
              -- Ccw0.chainData
                -- Reserved bits

The data address will be overwritten with the correct value (0x0), but
the apparent data chain bit will cause subsequent memory to be used as
the target of the data store, which may not be where we expect (0x0).

Clear out this space when we boot from DASD, so that we know it exists
exactly as we expect.

Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20201120160117.59366-2-farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

qemu-sparc queue

# gpg: Signature made Sun 22 Nov 2020 14:21:19 GMT
# gpg:                using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg:                issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-20201122:
  hw/display/tcx: add missing 64-bit access for framebuffer blitter

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Commit ae5643ec "hw/display/tcx: Allow 64-bit accesses to framebuffer stippler
and blitter" enabled 64-bit access for the TCX framebuffer stippler and blitter
but missed applying the change to one of the blitter MemoryRegions.

Whilst the original change works for me on my local NetBSD test image, the latest
NetBSD ISO panics on startup without this fix.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: ae5643ec ("hw/display/tcx: Allow 64-bit accesses to framebuffer stippler and blitter")
Buglink: https://bugs.launchpad.net/bugs/1892540


Message-Id: <20201120081754.18250-1-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

Bug fixes

# gpg: Signature made Fri 20 Nov 2020 15:49:13 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream:
  qboot: update to latest upstream
  usb: fix kconfig for usb-xhci-sysbus

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

* Some small qtest fixes
* One documentation update

# gpg: Signature made Fri 20 Nov 2020 15:35:15 GMT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/huth-gitlab/tags/pull-request-2020-11-20:
  qtest: do not return freed argument vector from qtest_rsp
  tests/qtest: fix memleak in npcm7xx_watchdog_timer-test
  tests/qtest: variable defined by g_autofree need to be initialized
  docs: Get rid of the weird _005f links in the man page

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

This also brings in two patches that Debian had to include,
qboot_stop_using_inttypes.patch and qboot_no_jump_tables.diff.

Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201120152408.164346-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Remove the "default y" for USB_XHCI_SYSBUS because
sysbus devices are not user creatable; boards that use them will
specify them manually with "imply" or "select" clauses.

It would be nice to keep the ability to remove PCIe and USB from microvm,
since thos can be disabled on the command line and therefore should not
be included if QEMU is configured --without-default-devices.  However
it's too late for 5.2 to figure out a place for the DSDT creation code.

Reported-by: Bruce Rogers <brogers@suse.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

If expected_args is 0, qtest frees the argument vector and then returns it
nevertheless.  Coverity complains; in practice this is not an issue because
expected_args == 0 means that the caller is not interested in the argument
vector, but it would be a potential problem if somebody wanted to add
commands with optional arguments to qtest.

Suggested-by: Kamil Dudka <kdudka@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201120073149.99079-1-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Properly free resp for get_watchdog_action() to avoid memory leak.
ASAN shows memory leak stack:

Indirect leak of 12360 byte(s) in 3 object(s) allocated from:
    #0 0x7f41ab6cbd4e in __interceptor_calloc (/lib64/libasan.so.5+0x112d4e)
    #1 0x7f41ab4eaa50 in g_malloc0 (/lib64/libglib-2.0.so.0+0x55a50)
    #2 0x556487d5374b in qdict_new ../qobject/qdict.c:29
    #3 0x556487d65e1a in parse_object ../qobject/json-parser.c:318
    #4 0x556487d65cb6 in parse_pair ../qobject/json-parser.c:287
    #5 0x556487d65ebd in parse_object ../qobject/json-parser.c:343
    #6 0x556487d661d5 in json_parser_parse ../qobject/json-parser.c:580
    #7 0x556487d513df in json_message_process_token ../qobject/json-streamer.c:92
    #8 0x556487d63919 in json_lexer_feed_char ../qobject/json-lexer.c:313
    #9 0x556487d63d75 in json_lexer_feed ../qobject/json-lexer.c:350
    #10 0x556487d28b2a in qmp_fd_receive ../tests/qtest/libqtest.c:613
    #11 0x556487d2a16f in qtest_qmp_eventwait_ref ../tests/qtest/libqtest.c:827
    #12 0x556487d248e2 in get_watchdog_action ../tests/qtest/npcm7xx_watchdog_timer-test.c:94
    #13 0x556487d25765 in test_enabling_flags ../tests/qtest/npcm7xx_watchdog_timer-test.c:243

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Message-Id: <20201118115646.2461726-3-kuhn.chenqun@huawei.com>
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

According to the glib function requirements, we need initialise
 the variable. Otherwise there will be compilation warnings:

glib-autocleanups.h:28:3: warning: ‘full_name’ may be
used uninitialized in this function [-Wmaybe-uninitialized]
   28 |   g_free (*pp);
      |   ^~~~~~~~~~~~

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-Id: <20201118115646.2461726-2-kuhn.chenqun@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

The man page does not contain all the chapters from the System Emulation
Users Guide, so some of the links that we've put into the qemu options
descriptions can not be resolved and thus the link names are used in the
man pages instead. These link names currently contain weird "_005f" letters
in the middle and just do not make any sense for the users. To avoid this
situation, replace the link names with more descriptive, natural text.

Message-Id: <20201116145341.91606-1-thuth@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/3
Buglink: https://bugs.launchpad.net/qemu/+bug/1453608


Signed-off-by: Thomas Huth <thuth@redhat.com>

Pull request

Fix --enable-modules --enable-trace-backends=dtrace with recent SystemTap
releases.

# gpg: Signature made Thu 19 Nov 2020 16:47:33 GMT
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha-gitlab/tags/tracing-pull-request:
  trace: use STAP_SDT_V2 to work around symbol visibility

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

QEMU binaries no longer launch successfully with recent SystemTap
releases. This is because modular QEMU builds link the sdt semaphores
into the main binary instead of into the shared objects where they are
used. The symbol visibility of semaphores is 'hidden' and the dynamic
linker prints an error during module loading:

  $ ./configure --enable-trace-backends=dtrace --enable-modules ...
  ...
  Failed to open module: /builddir/build/BUILD/qemu-4.2.0/s390x-softmmu/../block-curl.so: undefined symbol: qemu_curl_close_semaphore

The long-term solution is to generate per-module dtrace .o files and
link them into the module instead of the main binary.

In the short term we can define STAP_SDT_V2 so dtrace(1) produces a .o
file with 'default' symbol visibility instead of 'hidden'. This
workaround is small and easier to merge for QEMU 5.2 and downstream
backports.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1898700


Cc: wcohen@redhat.com
Cc: fche@redhat.com
Cc: kraxel@redhat.com
Cc: rjones@redhat.com
Cc: ddepaula@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-id: 20201119141457.844452-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

s390x fixes:
- fix propagation and reset for the new diag318 call
- fix hot-unplug for vfio-pci devices
- fix endianness issues in zPCI (regression fix)

# gpg: Signature made Thu 19 Nov 2020 10:15:58 GMT
# gpg:                using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg:                issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20201119:
  s390x/pci: fix endianness issues
  s390x/pci: Unregister listeners before destroying IOMMU address space
  s390/kvm: fix diag318 propagation and reset functionality

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The zPCI group and function structures are big endian. However, we do
not consistently store them as big endian locally, and are missing some
conversions.

Let's just store the structures as host endian instead and convert to
big endian when actually handling the instructions retrieving the data.

Also fix the layout of ClpReqQueryPciGrp: g is actually only 8 bit. This
also fixes accesses on little endian hosts, and makes accesses on big
endian hosts consistent.

Fixes: 28dc86a0 ("s390x/pci: use a PCI Group structure")
Fixes: 9670ee75 ("s390x/pci: use a PCI Function structure")
Fixes: 1e7552ff ("s390x/pci: get zPCI function info from host")
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201118104202.1301363-1-cohuck@redhat.com>

Hot-unplugging a vfio-pci device on s390x causes a QEMU crash:

qemu-system-s390x: ../softmmu/memory.c:2772:
 do_address_space_destroy: Assertion `QTAILQ_EMPTY(&as->listeners)' failed.

In s390, the IOMMU address space is freed during device unplug but the
associated vfio-pci device may not yet be finalized and therefore may
still have a listener registered to the IOMMU address space.

Commit a2166410 ("spapr_pci: Unregister listeners before destroying
the IOMMU address space") previously resolved this issue for spapr_pci.
We are now seeing this in s390x; it would seem the possibility for this
issue was already present but based on a bisect commit 2d24a646
("device-core: use RCU for list of children of a bus") has now changed
the timing such that it is now readily reproducible.

Add logic to ensure listeners are removed before destroying the address
space.

Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1605562955-21152-1-git-send-email-mjrosato@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

The Control Program Name Code (CPNC) portion of the diag318
info must be set within the SIE block of each VCPU in the
configuration. The handler will iterate through each VCPU
and dirty the diag318_info reg to be synced with KVM on a
subsequent sync_regs call.

Additionally, the diag318 info resets must be handled via
userspace. As such, QEMU will reset this value for each
VCPU during a modified clear, load normal, and load clear
reset event.

Fixes: fabdada9 ("s390: guest support for diagnose 0x318")
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-Id: <20201113221022.257054-1-walling@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

ppc patch queue for 2020-11-18

This fixes a regression that badly breaks some guest setups because
IPIs end up misconfigured in the XIVE interrupt controller. Hopefully,
the last fix for sPAPR. I'm sending this PR with the blessing of David
who is currently on holidays.

# gpg: Signature made Wed 18 Nov 2020 10:26:31 GMT
# gpg:                using RSA key B4828BAF943140CEF2A3491071D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>" [full]
# gpg:                 aka "Gregory Kurz <gregory.kurz@free.fr>" [full]
# gpg:                 aka "[jpeg image of size 3330]" [full]
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3  4910 71D4 D5E5 822F 73D6

* remotes/gkurz/tags/ppc-for-5.2-20201118:
  Revert series "spapr/xive: Allocate vCPU IPIs from the vCPU contexts"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Misc error reporting and checking fixes to authorization objects

# gpg: Signature made Wed 18 Nov 2020 12:48:53 GMT
# gpg:                using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* remotes/berrange-gitlab/tags/misc-fixes-pull-request:
  authz-simple: Check that 'identity' property is set
  authz-pam: Check that 'service' property is set
  authz-list-file: Improve an error message
  authz-list-file: Fix file read error handling

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Bugfixes for HVF and Windows builds.

# gpg: Signature made Wed 18 Nov 2020 08:34:05 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream:
  buildsys: Help git-diff adding .gitattributes config file
  hvf: Fix segment selector format
  hvf: Gate RDTSCP on CPU_BASED2_RDTSCP, not just CPU_BASED_TSC_OFFSET
  meson: Fixes curses detection on msys2
  meson: Fix build with --disable-guest-agent-msi
  docs: Fix some typos (found by codespell)
  meson: Fix argument for makensis (build regression)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

If the 'identify' property is not set, we'll pass a NULL pointer to
g_str_equal() and crash. Catch the error condition during the creation
of the object.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

If the 'service' property is not set, we'll call pam_start() with a NULL
pointer for the service name. This fails and leaves a message like this
in the syslog:

qemu-storage-daemon[294015]: PAM pam_start: invalid argument: service == NULL

Make specifying the property mandatory and catch the error already
during the creation of the object.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

When qauthz_list_file_load() rejects JSON values other than JSON
object with a rather confusing error message:

    $ echo 1 | qemu-system-x86_64 -nodefaults -S -display none  -object authz-list-file,id=authz0,filename=/dev/stdin
    qemu-system-x86_64: -object authz-list-file,id=authz0,filename=/dev/stdin: Invalid parameter type for 'obj', expected: dict

Improve to

    qemu-system-x86_64: -object authz-list-file,id=authz0,filename=/dev/stdin: File '/dev/stdin' must contain a JSON object

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.

qauthz_list_file_complete() is wrong that way: it passes @errp to
qauthz_list_file_complete() without checking for failure.  If it runs
into another failure, it trips error_setv()'s assertion.  Reproducer:

    $ qemu-system-x86_64 -nodefaults -S -display none -object authz-list-file,id=authz0,filename=
    qemu-system-x86_64: ../util/error.c:59: error_setv: Assertion `*errp == NULL' failed.
    Aborted (core dumped)

Fix it to check for failure.

Fixes: 55d86984
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

This series was largely built on the assumption that IPI numbers are
numerically equal to vCPU ids. Even if this happens to be the case
in practice with the default machine settings, this ceases to be true
if VSMT is set to a different value than the number of vCPUs per core.
This causes bogus IPI numbers to be created in KVM from a guest stand
point. This leads to unknow results in the guest, including crashes
or missing vCPUs (see BugLink) and even non-fatal oopses in current
KVM that lacks a check before accessing misconfigured HW (see [1]).

A tentative patch was sent (see [2]) but it seems too complex to be
merged in an RC. Since the original changes are essentially an
optimization, it seems safer to revert them for now. The damage is
done by commit acbdb995 ("spapr/xive: Allocate IPIs independently
from the other sources") but the previous patches in the series are
really preparatory patches. So this reverts the whole series:

eab0a2d0 ("spapr/xive: Allocate vCPU IPIs from the vCPU contexts")
acbdb995 ("spapr/xive: Allocate IPIs independently from the other sources")
fa94447a ("spapr/xive: Use kvmppc_xive_source_reset() in post_load")
235d3b11 ("spapr/xive: Modify kvm_cpu_is_enabled() interface")

[1] https://marc.info/?l=kvm-ppc&m=160458409722959&w=4
[2] https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg03626.html



Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Fixes: acbdb995 ("spapr/xive: Allocate IPIs independently from the other sources")
BugLink: https://bugs.launchpad.net/qemu/+bug/1900241


Signed-off-by: Greg Kurz <groug@kaod.org>
Acked-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <160554086275.1325084.12110142252189044646.stgit@bahia.lan>

Since commits 0979ed01 ("meson: rename .inc.h files to .h.inc")
and 139c1837 ("meson: rename included C source files to .c.inc")
'git-diff --function-context' stopped displaying C function context
correctly.
We can help git-diff by providing attributes to the .[ch].inc path
names. See:
https://git-scm.com/docs/gitattributes#_generating_diff_text



Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201014082209.3712625-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The Requested Privilege Level field is 2 bits, the Table Indicator field
is 1 bit and the Index field is the remaining 15 bits, with TI=0 meaning
GDT and TI=1 meaning LDT.

Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Message-Id: <20201116200414.28286-1-jrtc27@jrtc27.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Buglink: https://bugs.launchpad.net/qemu/+bug/1894836


Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Message-Id: <20201116200319.28138-1-jrtc27@jrtc27.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Fixes regression on curses detection in msys2
by commit#925a40df

Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20201116213106.589-1-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The QGA MSI target requires several macros which are only available
without --disable-guest-agent-msi.

Don't define that target if configure was called with --disable-guest-agent-msi.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20201117201834.408892-1-sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Fix also a similar typo in a code comment.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20201117193448.393472-1-sw@weilnetz.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

`make installer` with a DLL directory was broken.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20201117190640.390359-1-sw@weilnetz.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Fix netlink with latest iproute

# gpg: Signature made Tue 17 Nov 2020 15:16:26 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-5.2-pull-request:
  linux-user,netlink: add IFLA_BRPORT_MRP_RING_OPEN, IFLA_BRPORT_MRP_IN_OPEN
  linux-user,netlink: fix message translation with ip command

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

QObject patches patches for 2020-11-17

# gpg: Signature made Tue 17 Nov 2020 14:41:06 GMT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qobject-2020-11-17:
  json: Fix a memleak in parse_pair()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * hw/arm/virt: ARM_VIRT must select ARM_GIC
 * exynos: Fix bad printf format specifiers
 * hw/input/ps2.c: Remove remnants of printf debug
 * target/openrisc: Remove dead code attempting to check "is timer disabled"
 * register: Remove unnecessary NULL check
 * util/cutils: Fix Coverity array overrun in freq_to_str()
 * configure: Make "does libgio work" test pull in some actual functions
 * tmp105: reset the T_low and T_High registers
 * tmp105: Correct handling of temperature limit checks

# gpg: Signature made Tue 17 Nov 2020 13:47:48 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20201117:
  tmp105: Correct handling of temperature limit checks
  hw/misc/tmp105: reset the T_low and T_High registers
  configure: Make "does libgio work" test pull in some actual functions
  util/cutils: Fix Coverity array overrun in freq_to_str()
  register: Remove unnecessary NULL check
  target/openrisc: Remove dead code attempting to check "is timer disabled"
  hw/input/ps2.c: Remove remnants of printf debug
  exynos: Fix bad printf format specifiers
  hw/arm/virt: ARM_VIRT must select ARM_GIC

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Patches for 5.2.0-rc2:

- quorum: Fix crash with rewrite-corrupted and without read-write user
- io_uring: do not use pointer after free
- file-posix: Use fallback path for -EBUSY from FALLOC_FL_PUNCH_HOLE
- iotests: Fix failure on Python 3.9 due to use of a deprecated function
- char-stdio: Fix QMP default for 'signal'

# gpg: Signature made Tue 17 Nov 2020 11:43:17 GMT
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  iotests/081: Test rewrite-corrupted without WRITE
  iotests/081: Filter image format after testdir
  quorum: Require WRITE perm with rewrite-corrupted
  io_uring: do not use pointer after free
  file-posix: allow -EBUSY errors during write zeros on raw block devices
  iotests: Replace deprecated ConfigParser.readfp()
  char-stdio: Fix QMP default for 'signal'

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

SD/MMC patches

- Correctly handle 2 GB SCSD Memory Cards (Bin Meng)

CI jobs result:
. https://cirrus-ci.com/build/4688743904837632
. https://gitlab.com/philmd/qemu/-/pipelines/216829732
. https://travis-ci.org/github/philmd/qemu/builds/744026099



# gpg: Signature made Tue 17 Nov 2020 10:51:13 GMT
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/sdmmc-20201117:
  hw/sd: Fix 2 GiB card CSD register values

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>