Missed in commit 7537fe04 and commit 9b89b6a2.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1475766600-7273-1-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

Missed in commit d076a2ad and commit bd6092e4.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1474546563-16332-1-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>

Instead of requiring clients to actually call the query-cpu-*
commands to find out if they are implemented, remove them from
the output of "query-commands", so clients know they are not
available.

This is implemented by extending the existing hack at
qmp_unregister_commands_hack(). I wish I could avoid adding even
more #ifdefs to that code, but that's the solution we have today.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1475696941-8056-1-git-send-email-ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

QObject is fairly tightly coupled to QAPI these days, and I've been
effectively maintaining it together with QAPI for a while.  Update
MAINTAINERS to reflect that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1475084022-30117-3-git-send-email-armbru@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>

David graciously volunteered to take this off Luiz's hands.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1475084022-30117-2-git-send-email-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>

The 'old' dispatch code returned a QERR_MISSING_PARAMETER for missing
parameters, but the qapi qmp_dispatch() code uses
QERR_INVALID_PARAMETER_TYPE.

Improve qapi code to return QERR_MISSING_PARAMETER where
appropriate.

Fix expected error message in iotests.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20160930095948.3154-4-marcandre.lureau@redhat.com>
[Drop incorrect error_setg() from qmp_input_type_any() and
qmp_input_type_null()]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

This helps to figure out the expectations.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20160930095948.3154-3-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qiv->root should not be null, make that clearer with some assert.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20160930095948.3154-2-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

These tests would have caught the bug fixed by the previous commit.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1475594630-24758-1-git-send-email-armbru@redhat.com>

Unlike the other visit methods, visit_type_any() and visit_type_null()
neglect to check whether qmp_input_get_object() succeeded.  They crash
when it fails.  Reproducer:

{ "execute": "qom-set",
  "arguments": { "path": "/machine", "property": "rtc-time" } }

Will crash with:

qapi/qapi-visit-core.c:277: visit_type_any: Assertion `!err != !*obj'
failed

Broken in commit 5c678ee8.  Fix by adding the missing error checks.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20160922203927.28241-3-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rephrased]
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Since commit ad739706, user_creatable_add_type() expects to be
given a qdict. However, if object-add is called without props, you reach
the assert: "qemu/qom/object_interfaces.c:115: user_creatable_add_type:
Assertion `qdict' failed.", because the qdict isn't created in this
case (it's optional).

Furthermore, qmp_input_visitor_new() is not meant to be called without a
dict, and a further commit will assert in this situation.

If none given, create an empty qdict in qmp to avoid the
user_creatable_add_type() assert(qdict).

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20160922203927.28241-2-marcandre.lureau@redhat.com>
Tested-by: Xiao Long Jiang <zxiaol@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

HMP pull

Just Wanpeng's pull request this time, but
this pull is as much about me checking out my
process.

# gpg: Signature made Tue 04 Oct 2016 18:24:10 BST
# gpg:                using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-hmp-20161004:
  hmp: fix qemu crash due to ioapic state dump w/ split irqchip

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The qemu will crash when info ioapic through hmp if irqchip
is split. Below message is splat:

KVM_GET_IRQCHIP failed: Unknown error -6

This patch fix it by dumping the ioapic state from the qemu
emulated ioapic if irqchip is split.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Message-Id: <1474602456-3232-1-git-send-email-wanpeng.li@hotmail.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20160923090824.GF15411@pxdev.xzpeter.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

Block layer patches

# gpg: Signature made Thu 29 Sep 2016 14:11:30 BST
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  oslib-posix: add a configure switch to debug stack usage
  coroutine-sigaltstack: use helper for allocating stack memory
  coroutine-ucontext: use helper for allocating stack memory
  coroutine: add a macro for the coroutine stack size
  coroutine-sigaltstack: rename coroutine struct appropriately
  oslib-posix: add helpers for stack alloc and free
  block: Remove qemu_root_bds_opts
  block: Move 'discard' option to bdrv_open_common()
  block: Use 'detect-zeroes' option for 'blockdev-change-medium'
  block: Parse 'detect-zeroes' in bdrv_open_common()
  block/qapi: Move 'aio' option to file driver
  block/qapi: Use separate options type for curl driver
  block: Drop aio/cache consistency check from qmp_blockdev_add()
  block: Fix error path in qmp_blockdev_change_medium()
  block-backend: remove blk_flush_all
  qemu: use bdrv_flush_all for vm_stop et al
  block: reintroduce bdrv_flush_all

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * Netduino 2 improvements (SPI, ADC devices)
 * fix some Mainstone key mappings
 * vmstateify tsc210x, tsc2005
 * virt: add 2.8 machine type
 * virt: support in-kernel GICv3 ITS
 * generic-loader device
 * A64: fix iss_sf decoding in disas_ld_lit
 * correctly handle 'sub pc, pc, 1' for ARMv6

# gpg: Signature made Tue 04 Oct 2016 13:41:34 BST
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20161004: (27 commits)
  target-arm: Correctly handle 'sub pc, pc, 1' for ARMv6
  target-arm: A64: Fix decoding of iss_sf in disas_ld_lit
  cadence_gem: Fix priority queue out of bounds access
  docs: Add a generic loader explanation document
  generic-loader: Add a generic loader
  ARM: Virt: ACPI: Add GIC ITS description in ACPI MADT table
  ACPI: Add GIC Interrupt Translation Service Structure definition
  arm/virt: Add ITS to the virt board
  hw/intc/arm_gicv3_its: Implement support for in-kernel ITS emulation
  kvm-all: Pass requester ID to MSI routing functions
  target-arm: move gicv3_class_name from machine to kvm_arm.h
  hw/intc/arm_gicv3_its: Implement ITS base class
  hw/intc/arm_gic(v3)_kvm: Initialize gsi routing
  hw/arm/virt: add 2.8 machine type
  vmstateify tsc210x
  vmstateify tsc2005
  hw/arm: Fix Integrator/CM initialization
  mainstone: Add mapping for dot, slash and backspace.
  mainstone: Fix incorrect key mapping for Enter key.
  MAINTAINERS: Add Alistair to the maintainers list
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

In the ARM v6 architecture, 'sub pc, pc, 1' is not an interworking
branch, so the computed new value is written to r15 as a normal
value. The architecture says that in this case, bits [1:0] of
the value written must be ignored if we are in ARM mode (or
bit [0] ignored if in Thumb mode); this is a change from the
ARMv4/v5 specification that behaviour is UNPREDICTABLE.
Use the correct mask on the PC value when doing a non-interworking
store to PC.

A popular library used on RaspberryPi uses this instruction
as part of a trick to determine whether it is running on
ARMv6 or ARMv7, and we were mishandling the sequence.

Fixes bug: https://bugs.launchpad.net/bugs/1625295



Reported-by:  <stu.axon@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1474380941-4730-1-git-send-email-peter.maydell@linaro.org

Fix the decoding of iss_sf in disas_ld_lit.
The SF (Sixty-Four) field in the ISS (Instruction Specific Syndrome)
is a bit that specifies the width of the register that the
instruction loads to.

If cleared it specifies 32 bits.
If set it specifies 64 bits.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1475230780-8669-1-git-send-email-edgar.iglesias@gmail.com
[PMM: tweaked phrasing per on-list discussion]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

There was an error with some of the register implementation assuming
there are 16 priority queues supported when the IP only supports 8. This
patch corrects the registers to only support 8 queues.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 33bf2d28326d22875602234b8b15cf56fb678333.1474911607.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 9d991a2df990cf55e2630410a5a03ea48930af5d.1475195078.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Add a generic loader to QEMU which can be used to load images or set
memory values.

Internally inside QEMU this is a device. It is a strange device that
provides no hardware interface but allows QEMU to monkey patch memory
specified when it is created. To be able to do this it has a reset
callback that does the memory operations.

This device allows the user to monkey patch memory. To be able to do
this it needs a backend to manage the datas, the same as other
memory-related devices. In this case as the backend is so trivial we
have merged it with the frontend instead of creating and maintaining a
seperate backend.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 10f2a9dce5e5e11b6c6d959415b0ad6ee22bcba5.1475195078.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

If GIC ITS is supported, add description in ACPI MADT table, then guest
could use ITS when booting with ACPI.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1474616617-366-9-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ACPI Spec 6.0 introduces GIC Interrupt Translation Service Structure.
Here we add the definition of the Structure.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1474616617-366-8-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

If supported by the configuration, ITS will be added automatically.

This patch also renames v2m_phandle to msi_phandle because it's now used
by both MSI implementations.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1474616617-366-7-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The ITS control frame is in-kernel emulated while accesses to the
GITS_TRANSLATER are mediated through the KVM_SIGNAL_MSI ioctl (MSI
direct MSI injection advertised by the CAP_SIGNAL_MSI capability)

the kvm_gsi_direct_mapping is explicitly set to false to emphasize the
difference with GICv2M. Direct mapping cannot work with ITS since
the content of the MSI data is not the target interrupt ID but an
eventd id.

GSI routing is advertised (kvm_gsi_routing_allowed) as well as
msi/irqfd signaling (kvm_msi_via_irqfd_allowed).

The MSI frame (GITS_TRANSLATER) absolute GPA is computed on first
kvm_its_send_msi() call. It is then passed through KVM_SIGNAL_MSI
ioctl.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1474616617-366-6-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Introduce global kvm_msi_use_devid flag plus associated
kvm_msi_devid_required() macro. Passes the device ID,
if needed, while building the MSI route entry. Device IDs are
required by the ARM GICv3 ITS (IRQ remapping function is based on
this information).

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1474616617-366-5-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Machine.c contains code related to migration. Let's move
gicv3_class_name to kvm_arm.h instead.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1474616617-366-4-git-send-email-eric.auger@redhat.com
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

This is the basic skeleton for both KVM and software-emulated ITS.
Since we already prepare status structure, we also introduce complete
VMState description. But, because we currently have no migratable
implementations, we also set unmigratable flag.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1474616617-366-3-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Advertise gsi routing and set up irqchip routing entries for
GIC SPIs.

This is not mandated as long as MSI routing is not used
(because the kernel sets a default irqchip routing table).
However once MSI routing gets used (for VIRTIO-PCI vhost for
example), the first call to KVM_SET_GSI_ROUTING overrides the
kernel default irqchip table.

If no routing entry exists for the GSI, any IRQFD signaling for
this GSI will fail.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1474616617-366-2-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 1474641676-25017-1-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

I'm now saving all 3 of the pll entries; only 2 were saved before.
There are a couple of times that were previously stored as offsets
from 'now' calculated before saving;  with vmstate it's easier
to store the 'now' and fix it up on reload.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1474977735-10156-3-git-send-email-dgilbert@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

I've converted the fields in it's main data structure
to fixed size types in ways that look sane.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1474977735-10156-2-git-send-email-dgilbert@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Initialization of a class instance cannot depend on its own properties
as these are not yet set.  Move parts of integratorcm_init() that depend
on the "memsz" property to the newly added integratorcm_realize().

This fixes: https://bugs.launchpad.net/qemu/+bug/1624726



Signed-off-by: Jakub Jermar <jakub@jermar.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Add missed out mappings. These mappings are from the "Intel PXA27x
Processor Developer's Kit User Guide".

Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: Deepak S. <deepak@zilogic.com>
Message-id: 1475063033-8176-3-git-send-email-vijaykumar@zilogic.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

According to the manual the (5, 5) corresponds to backspace key, and
not Enter key. Linux kernel maps (5, 4) to the enter key. Fixing it up
to match the mapping in the Linux kernel.

Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: Deepak S. <deepak@zilogic.com>
Message-id: 1475063033-8176-2-git-send-email-vijaykumar@zilogic.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Add Alistair Francis as the maintainer for the Netduino 2
and SMM32F205 SoC.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5a46ccf398b050a41cc3b3d0e94bcff4ce2d85e0.1474742262.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Connect the SPI devices to the STM32F205 SoC.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: d05849120420f8db0d9aa053bd23134c33cd9180.1474742262.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Connect the ADC devices to the STM32F205 SoC.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Message-id: 6214eda399da7b47014f6f895be25323d52dbc9e.1474742262.git.alistair@alistair23.me
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Message-id: 52e5d361e3b5a0ea8554aca73ee65ae2b586112e.1474742262.git.alistair@alistair23.me
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Add the STM32F2xx SPI device.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 8197811d5c94f814fa67c6a33ca2f7fd0aa97432.1474742262.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Add the STM32F2xx ADC device. This device randomly
generates values on each read.

This also includes creating a hw/adc directory.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 3240e660adaf537f55a63ce06096e844aece8cda.1474742262.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>