A device shouldn't access its parent object which is QOM internal.
Instead it should use type cast for this purporse. This patch fixes this
issue for all NPCM7XX Devices.

Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210108190945.949196-7-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The PWM module is part of NPCM7XX module. Each NPCM7XX module has two
identical PWM modules. Each module contains 4 PWM entries. Each PWM has
two outputs: frequency and duty_cycle. Both are computed using inputs
from software side.

This module does not model detail pulse signals since it is expensive.
It also does not model interrupts and watchdogs that are dependant on
the detail models. The interfaces for these are left in the module so
that anyone in need for these functionalities can implement on their
own.

The user can read the duty cycle and frequency using qom-get command.

Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210108190945.949196-5-wuhaotsh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The ADC is part of NPCM7XX Module. Its behavior is controled by the
ADC_CON register. It converts one of the eight analog inputs into a
digital input and stores it in the ADC_DATA register when enabled.

Users can alter input value by using qom-set QMP command.

Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210108190945.949196-4-wuhaotsh@google.com
[PMM: Added missing hw/adc/trace.h file]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

This patch makes NPCM7XX Timer to use a the timer clock generated by the
CLK module instead of the magic number TIMER_REF_HZ.

Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210108190945.949196-3-wuhaotsh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

This patch allows NPCM7XX CLK module to compute clocks that are used by
other NPCM7XX modules.

Add a new struct NPCM7xxClockConverterState which represents a
single converter.  Each clock converter in CLK module represents one
converter in NPCM7XX CLK Module(PLL, SEL or Divider). Each converter
takes one or more input clocks and converts them into one output clock.
They form a clock hierarchy in the CLK module and are responsible for
outputing clocks for various other modules in an NPCM7XX SoC.

Each converter has a function pointer called "convert" which represents
the unique logic for that converter.

The clock contains two initialization information: ConverterInitInfo and
ConverterConnectionInfo. They represent the vertices and edges in the
clock diagram respectively.

Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210108190945.949196-2-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The lan9118 code mostly uses symbolic constants for register offsets;
the exceptions are those which the datasheet doesn't give an official
symbolic name to.

Add some names for the registers which don't already have them, based
on the longer names they are given in the memory map.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210108180401.2263-3-peter.maydell@linaro.org

A copy-and-paste error meant that the return value for register offset 0x44
(the RX Status FIFO PEEK register) returned a byte from a bogus offset in
the rx status FIFO. Fix the typo.

Cc: qemu-stable@nongnu.org
Fixes: https://bugs.launchpad.net/qemu/+bug/1904954


Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210108180401.2263-2-peter.maydell@linaro.org

Add trace events for virtio command and response tracing.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Message-Id: <20201116183114.55703-2-hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

At present, when booting U-Boot on QEMU sabrelite, we see:

  Net:   Board Net Initialization Failed
  No ethernet found.

U-Boot scans PHY at address 4/5/6/7 (see board_eth_init() in the
U-Boot source: board/boundary/nitrogen6x/nitrogen6x.c). On the real
board, the Ethernet PHY is at address 6. Adjust this by updating the
"fec-phy-num" property of the fsl_imx6 SoC object.

With this change, U-Boot sees the PHY but complains MAC address:

  Net:   using phy at 6
  FEC [PRIME]
  Error: FEC address not set.

This is due to U-Boot tries to read the MAC address from the fuse,
which QEMU does not have any valid content filled in. However this
does not prevent the Ethernet from working in QEMU. We just need to
set up the MAC address later in the U-Boot command shell, by:

  => setenv ethaddr 00:11:22:33:44:55

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210106063504.10841-4-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Currently when U-Boot boots, it prints "??" for i.MX processor:

  CPU:   Freescale i.MX?? rev1.0 at 792 MHz

The register that was used to determine the silicon type is
undocumented in the latest IMX6DQRM (Rev. 6, 05/2020), but we
can refer to get_cpu_rev() in arch/arm/mach-imx/mx6/soc.c in
the U-Boot source codes that USB_ANALOG_DIGPROG is used.

Update its reset value to indicate i.MX6Q.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210106063504.10841-3-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

U-Boot expects PMU_MISC0 register bit 7 is set (see init_bandgap()
in arch/arm/mach-imx/mx6/soc.c) during boot. This bit indicates the
bandgap has stabilized.

With this change, the latest upstream U-Boot (v2021.01-rc3) for imx6
sabrelite board (mx6qsabrelite_defconfig), with a slight change made
by switching CONFIG_OF_SEPARATE to CONFIG_OF_EMBED, boots to U-Boot
shell on QEMU with the following command:

$ qemu-system-arm -M sabrelite -smp 4 -m 1G -kernel u-boot \
    -display none -serial null -serial stdio

Boot log below:

  U-Boot 2021.01-rc3 (Dec 12 2020 - 17:40:02 +0800)

  CPU:   Freescale i.MX?? rev1.0 at 792 MHz
  Reset cause: POR
  Model: Freescale i.MX6 Quad SABRE Lite Board
  Board: SABRE Lite
  I2C:   ready
  DRAM:  1 GiB
  force_idle_bus: sda=0 scl=0 sda.gp=0x5c scl.gp=0x55
  force_idle_bus: failed to clear bus, sda=0 scl=0
  force_idle_bus: sda=0 scl=0 sda.gp=0x6d scl.gp=0x6c
  force_idle_bus: failed to clear bus, sda=0 scl=0
  force_idle_bus: sda=0 scl=0 sda.gp=0xcb scl.gp=0x5
  force_idle_bus: failed to clear bus, sda=0 scl=0
  MMC:   FSL_SDHC: 0, FSL_SDHC: 1
  Loading Environment from MMC... *** Warning - No block device, using default environment

  In:    serial
  Out:   serial
  Err:   serial
  Net:   Board Net Initialization Failed
  No ethernet found.
  starting USB...
  Bus usb@2184000: usb dr_mode not found
  USB EHCI 1.00
  Bus usb@2184200: USB EHCI 1.00
  scanning bus usb@2184000 for devices... 1 USB Device(s) found
  scanning bus usb@2184200 for devices... 1 USB Device(s) found
         scanning usb for storage devices... 0 Storage Device(s) found
         scanning usb for ethernet devices... 0 Ethernet Device(s) found
  Hit any key to stop autoboot:  0
  =>

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210106063504.10841-2-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

When running device-introspect-test, a memory leak occurred in the
exynos4210_mct_init function, so use ptimer_free() in the finalize function to
avoid it.

ASAN shows memory leak stack:

Indirect leak of 96 byte(s) in 1 object(s) allocated from:
    #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0)
    #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800)
    #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432
    #3 0xaaabf56b01a0 in exynos4210_mct_init /qemu/hw/timer/exynos4210_mct.c:1505
    #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515
    #5 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729
    #6 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153
    #7 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59
    #8 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110
    #9 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136
    #10 0xaaabf6552708 in aio_bh_poll /qemu/util/async.c:164
    #11 0xaaabf655f19c in aio_dispatch /qemu/util/aio-posix.c:381
    #12 0xaaabf65523f4 in aio_ctx_dispatch /qemu/util/async.c:306

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

When running device-introspect-test, a memory leak occurred in the
mv88w8618_pit_init function, so use ptimer_free() in the finalize function to
avoid it.

ASAN shows memory leak stack:

Indirect leak of 192 byte(s) in 4 object(s) allocated from:
    #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0)
    #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800)
    #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523
    #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544
    #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562
    #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433
    #6 0xaaabf5bb2290 in mv88w8618_timer_init /qemu/hw/arm/musicpal.c:862
    #7 0xaaabf5bb2290 in mv88w8618_pit_init /qemu/hw/arm/musicpal.c:954
    #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515
    #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729
    #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153
    #11 0xaaabf5a95540 in qdev_device_help /qemu/softmmu/qdev-monitor.c:283
    #12 0xaaabf5a96940 in qmp_device_add /qemu/softmmu/qdev-monitor.c:801

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

When running device-introspect-test, a memory leak occurred in the
mss_timer_init function, so use ptimer_free() in the finalize function to avoid
it.

ASAN shows memory leak stack:

Indirect leak of 192 byte(s) in 2 object(s) allocated from:
    #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0)
    #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800)
    #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432
    #3 0xaaabf58a0010 in mss_timer_init /qemu/hw/timer/mss-timer.c:235
    #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515
    #5 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564
    #6 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547
    #7 0xaaabf5b8316c in m2sxxx_soc_initfn /qemu/hw/arm/msf2-soc.c:70
    #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515
    #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729
    #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153
    #11 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59
    #12 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

When running device-introspect-test, a memory leak occurred in the
exynos4210_pwm_init function, so use ptimer_free() in the finalize function to
avoid it.

ASAN shows memory leak stack:

Indirect leak of 240 byte(s) in 5 object(s) allocated from:
    #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0)
    #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800)
    #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523
    #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544
    #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562
    #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433
    #6 0xaaabf56a36cc in exynos4210_pwm_init /qemu/hw/timer/exynos4210_pwm.c:401
    #7 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515
    #8 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729
    #9 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153
    #10 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59
    #11 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110
    #12 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

When running device-introspect-test, a memory leak occurred in the
exynos4210_rtc_init function, so use ptimer_free() in the finalize function to
avoid it.

ASAN shows memory leak stack:

Indirect leak of 96 byte(s) in 1 object(s) allocated from:
    #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0)
    #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800)
    #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432
    #3 0xaaabf57b3934 in exynos4210_rtc_init /qemu/hw/rtc/exynos4210_rtc.c:567
    #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515
    #5 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729
    #6 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153
    #7 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59
    #8 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110
    #9 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136
    #10 0xaaabf6552708 in aio_bh_poll /qemu/util/async.c:164
    #11 0xaaabf655f19c in aio_dispatch /qemu/util/aio-posix.c:381
    #12 0xaaabf65523f4 in aio_ctx_dispatch /qemu/util/async.c:306

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

When running device-introspect-test, a memory leak occurred in the a10_pit_init
function, so use ptimer_free() in the finalize function to avoid it.

ASAN shows memory leak stack:

Indirect leak of 288 byte(s) in 6 object(s) allocated from:
    #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0)
    #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800)
    #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523
    #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544
    #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562
    #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433
    #6 0xaaabf57415e8 in a10_pit_init /qemu/hw/timer/allwinner-a10-pit.c:278
    #7 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515
    #8 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564
    #9 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547
    #10 0xaaabf5b94680 in aw_a10_init /qemu/hw/arm/allwinner-a10.c:49
    #11 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515
    #12 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

When running device-introspect-test, a memory leak occurred in the
digic_timer_init function, so use ptimer_free() in the finalize function to
avoid it.

ASAN shows memory leak stack:

Indirect leak of 288 byte(s) in 3 object(s) allocated from:
    #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0)
    #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800)
    #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432
    #3 0xaaabf5b04084 in digic_timer_init /qemu/hw/timer/digic-timer.c:142
    #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515
    #5 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564
    #6 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547
    #7 0xaaabf5b40e84 in digic_init /qemu/hw/arm/digic.c:46
    #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515
    #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729
    #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153
    #11 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59
    #12 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

This commit is the result of running the timer-del-timer-free.cocci
script on the whole source tree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-4-peter.maydell@linaro.org

Support for running KVM on 32-bit Arm hosts was removed in commit
82bf7ae8.  You can still run a 32-bit guest on a 64-bit Arm
host CPU, but because Arm KVM requires the host and guest CPU types
to match, it is not possible to run a guest that requires a Cortex-A9
or Cortex-A15 CPU there.  That means that the code in the
highbank/midway board models to support KVM is no longer used, and we
can delete it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201215144215.28482-1-peter.maydell@linaro.org

The CCR is a register most of whose bits are banked between security
states but where BFHFNMIGN is not, and we keep it in the non-secure
entry of the v7m.ccr[] array.  The logic which tries to handle this
bit fails to implement the "RAZ/WI from Nonsecure if AIRCR.BFHFNMINS
is zero" requirement; correct the omission.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201210201433.26262-2-peter.maydell@linaro.org

virt machine's 'smp_cpus' and machine->smp.cpus must always have the
same value. And, anywhere we have virt machine state we have machine
state. So let's remove the redundancy. Also, to make it easier to see
that machine->smp is the true source for "smp_cpus" and "max_cpus",
avoid passing them in function parameters, preferring instead to get
them from the state.

No functional change intended.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Ying Fang <fangying1@huawei.com>
Message-id: 20201215174815.51520-1-drjones@redhat.com
[PMM: minor formatting tweak to smp_cpus variable declaration]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Correct the indexing into s->cpu_ctlr for vCPUs.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20201214222154.3480243-2-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The sun4m board code connects both of the IRQ outputs of each ESCC to the
same slavio input qemu_irq. Connecting two qemu_irqs outputs directly to the
same input is not valid as it produces subtly wrong behaviour (for instance
if both the IRQ lines are high, and then one goes low, the PIC input will see
this as a high-to-low transition even though the second IRQ line should still
be holding it high).

This kind of wiring needs an explicitly created OR gate; add one.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20201219111934.5540-1-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

Currently the GRLIB_IRQMP device is used in one place (the leon3 board),
but instead of the device providing inbound gpio lines for the board
to wire up, the board code itself calls qemu_allocate_irqs() with
the handler function being a set_irq function defined in the code
for the device.

Refactor this into the standard setup of a device having input
gpio lines.

This fixes a trivial Coverity memory leak report (the leon3
board code leaks the IRQ array returned from qemu_allocate_irqs()).

Fixes: Coverity CID 1421922
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201212144134.29594-2-peter.maydell@linaro.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

Per the "NCR89C105 Chip Specification" referenced in the header:

                  Chip-level Address Map

  ------------------------------------------------------------------
  | 1D0 0000 ->   | Counter/Timers                        | W,D    |
  |   1DF FFFF    |                                       |        |
  ...

  The address map indicated the allowed accesses at each address.
  [...] W indicates a word access, and D indicates a double-word
  access.

The SLAVIO timer controller is implemented expecting 32-bit accesses.
Commit a3d12d07 restricted the memory accesses to 32-bit, while
the device allows 64-bit accesses.

This was not an issue until commit 5d971f9e which reverted
("memory: accept mismatching sizes in memory_region_access_valid").

Fix by renaming .valid MemoryRegionOps as .impl, and add the valid
access range (W -> 4, D -> 8).

Since commit 21786c7e ("memory: Log invalid memory accesses")
this class of bug can be quickly debugged displaying 'guest_errors'
accesses, as:

  $ qemu-system-sparc -M SS-20 -m 256 -bios ss20_v2.25_rom -serial stdio -d guest_errors

  Power-ON Reset
  Invalid access at addr 0x0, size 8, region 'timer-1', reason: invalid size (min:4 max:4)

  $ qemu-system-sparc -M SS-20 -m 256 -bios ss20_v2.25_rom -monitor stdio -S
  (qemu) info mtree
  address-space: memory
    0000000000000000-ffffffffffffffff (prio 0, i/o): system
      ...
      0000000ff1300000-0000000ff130000f (prio 0, i/o): timer-1
             ^^^^^^^^^                                 ^^^^^^^
                   \ memory region base address and name /

  (qemu) info qtree
  bus: main-system-bus
    dev: slavio_timer, id ""              <-- device type name
      gpio-out "sysbus-irq" 17
      num_cpus = 1 (0x1)
      mmio 0000000ff1310000/0000000000000014
      mmio 0000000ff1300000/0000000000000010 <--- base address
      mmio 0000000ff1301000/0000000000000010
      mmio 0000000ff1302000/0000000000000010
      ...

Reported-by: Yap KV <yapkv@yahoo.com>
Buglink: https://bugs.launchpad.net/bugs/1906905


Fixes: a3d12d07 ("slavio_timer: convert to memory API")
CC: qemu-stable@nongnu.org
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201205150903.3062711-1-f4bug@amsat.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

This fixes a long standing issue with MorphOS booting on sam460ex
which turns out to be because of suspicious values written to PCI
config address that apparently works on real machine but caused wrong
access on this device model. This replaces a previous work around for
this with a better fix that makes it work.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <6fd215ab2bc5f8d4455cd20ed1a2f059e4415fe5.1609636173.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

The trace event for pci_host_config_write() was also using the trace
event for read. Add corresponding trace and correct this.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <a6c7dcf7153cc537123ed8ceac060f2f64a883cb.1609636173.git.balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

The code mapping all PCI interrupts to a single CPU IRQ works but is
not trivial so document it in a comment.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <c25c0310510672b58466e795fd701e65e8f1ff97.1609636173.git.balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Dependency on FDT_PPC was added in commit b0048f76
("hw/ppc/Kconfig: Only select FDT helper for machines using it") but
it does not seem to be really necessary so remove it again.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <7461a20b129a912aeacdb9ad115a55f0b84c8726.1609636173.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

All machines that select SERIAL also select PPC4XX so we can just add
this common dependency there once.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <94f1eb7cfb7f315bd883d825f3ce7e0cfc2f2b69.1609636173.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

qemu-system-ppc64 built with --without-default-devices crashes:

Type 'pnv-phb4-root-port' is missing its parent 'pcie-root-port-base'
Aborted (core dumped)

Have POWERNV to select PCIE_PORT. This is done through a
new PCI_POWERNV config in hw/pci-host/Kconfig since POWERNV
doesn't have a direct dependency on PCI. For this reason,
PCI_EXPRESS and MSI_NONBROKEN are also moved under
PCI_POWERNV.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <160883058299.253005.342913177952681375.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Have PSERIES to select XICS and XIVE, and directly check PSERIES
in hw/intc/meson.build to enable build of the XICS and XIVE sPAPR
backends, like POWERNV already does. This allows to get rid of the
intermediate XICS_SPAPR and XIVE_SPAPR.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160883057560.253005.4206568349917633920.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Linking of the qemu-system-ppc64 fails on a POWER9 host when
--without-default-devices is passed to configure:

$ ./configure --without-default-devices \
              --target-list=ppc64-softmmu && make

...

libqemu-ppc64-softmmu.fa.p/hw_ppc_e500.c.o: In function `ppce500_init_mpic_kvm':
/home/greg/Work/qemu/qemu-ppc/build/../hw/ppc/e500.c:777: undefined reference to `kvm_openpic_connect_vcpu'
libqemu-ppc64-softmmu.fa.p/hw_ppc_spapr_irq.c.o: In function `spapr_irq_check':
/home/greg/Work/qemu/qemu-ppc/build/../hw/ppc/spapr_irq.c:189: undefined reference to `xics_kvm_has_broken_disconnect'
libqemu-ppc64-softmmu.fa.p/hw_intc_spapr_xive.c.o: In function `spapr_xive_post_load':
/home/greg/Work/qemu/qemu-ppc/build/../hw/intc/spapr_xive.c:530: undefined reference to `kvmppc_xive_post_load'

... and tons of other symbols belonging to the KVM backend of the
openpic, XICS and XIVE interrupt controllers.

It turns out that OPENPIC_KVM, XICS_KVM and XIVE_KVM are marked
to depend on KVM but this has no effect when minikconf runs in
allnoconfig mode. Such reverse dependencies should rather be
handled with a 'select' statement, eg.

config OPENPIC
    select OPENPIC_KVM if KVM

or even better by getting rid of the intermediate _KVM config
and directly checking CONFIG_KVM in the meson.build file:

specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_OPENPIC'],
		if_true: files('openpic_kvm.c'))

Go for the latter with OPENPIC, XICS and XIVE.

This went unnoticed so far because CI doesn't test the build with
--without-default-devices and KVM enabled on a POWER host.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160883056791.253005.14924294027763955653.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Use a less generic name for an easier experience with tools such as
cscope or grep.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201218103400.689660-6-groug@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Documentation of object_child_foreach_recursive() clearly stipulates
that "it is forbidden to add or remove children from @obj from the @fn
callback". But this is exactly what we do during machine reset. The call
to spapr_drc_reset() can finalize the hot-unplug sequence of a PHB or a
PCI bridge, both of which will then in turn destroy their PCI DRCs. This
could potentially invalidate the iterator used by do_object_child_foreach().
It is pure luck that this haven't caused any issues so far.

Use spapr_drc_reset_all() since it can cope with DRC removal.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201218103400.689660-5-groug@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

No need to expose the way DRCs are traversed outside of spapr_drc.c.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201218103400.689660-4-groug@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Documentation of object_property_iter_init() clearly stipulates that
"it is forbidden to modify the property list while iterating". But this
is exactly what we do when resetting transient DR connectors during CAS.
The call to spapr_drc_reset() can finalize the hot-unplug sequence of a
PHB or a PCI bridge, both of which will then in turn destroy their PCI
DRCs. This could potentially invalidate the iterator. It is pure luck
that this haven't caused any issues so far.

Change spapr_drc_reset() to return true if it caused a device to be
removed. Restart from scratch in this case. This can potentially
increase the overall DRC reset time, especially with a high maxmem
which generates a lot of LMB DRCs. But this kind of setup is rare,
and so is the use case of rebooting a guest while doing hot-unplug.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201218103400.689660-3-groug@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Non-transient DRCs are either in the empty or the ready state,
which means spapr_drc_reset() doesn't change their state. It
is thus not needed to do any checking. Call spapr_drc_reset()
unconditionally and squash spapr_drc_transient() into its
only user, spapr_drc_needed().

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201218103400.689660-2-groug@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

It is currently impossible to hot-unplug a memory device between
machine reset and CAS.

(qemu) device_del dimm1
Error: Memory hot unplug not supported for this guest

This limitation was introduced in order to provide an explicit
error path for older guests that didn't support hot-plug event
sources (and thus memory hot-unplug).

The linux kernel has been supporting these since 4.11. All recent
enough guests are thus capable of handling the removal of a memory
device at all time, including during early boot.

Lift the limitation for the latest machine type. This means that
trying to unplug memory from a guest that doesn't support it will
likely just do nothing and the memory will only get removed at
next reboot. Such older guests can still get the existing behavior
by using an older machine type.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160794035064.23292.17560963281911312439.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>