Change 'ret' to uint64_t.  This resolves a FIXME in the
m68k and nios2 semihosting that we've lost data.
Change 'err' to int.  There is nothing target-specific
about the width of the errno value.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

This syscall will be used by m68k and nios2 semihosting.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

These syscalls will be used by m68k and nios2 semihosting.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Split out the non-ARM specific portions of SYS_SYSTEM to a
reusable function.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Split out the non-ARM specific portions of SYS_RENAME to a
reusable function.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Split out the non-ARM specific portions of SYS_REMOVE to a
reusable function.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

The ARM-specific SYS_FLEN isn't really something that can be
reused by other semihosting apis, but there are parts that can
reused for the implementation of semihost_sys_fstat.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Split out the non-ARM specific portions of SYS_ISTTY to a
reusable function.  This handles all GuestFD.

Add a common_semi_istty_cb helper to translate the Posix
error return, 0+ENOTTY, to the Arm semihosting not-a-file
success result.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Split out the non-ARM specific portions of SYS_SEEK to a
reusable function.  This handles all GuestFD.  Isolate the
curious ARM-specific return value processing to a new
callback, common_semi_seek_cb.

Expand the internal type of the offset to int64_t, and
provide the whence argument, which will be required by
m68k and nios2 semihosting.

Note that gdb_do_syscall %x reads target_ulong, not int.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Fixes a minor bug in which a 64-bit guest on a 32-bit host could
truncate the length.  This would only ever cause a problem if
there were no bits set in the low 32, so that it truncates to 0.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Split out the non-ARM specific portions of SYS_WRITE to a
reusable function.  This handles all GuestFD.  This removes
the last use of common_semi_syscall_len.

Note that gdb_do_syscall %x reads target_ulong, not int.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Split out the non-ARM specific portions of SYS_READ to a
reusable function.  This handles all GuestFD.  Isolate the
curious ARM-specific return value processing to a new
callback, common_semi_rw_cb.

Note that gdb_do_syscall %x reads target_ulong, not int.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Split out the non-ARM specific portions of SYS_CLOSE to a
reusable function.  This handles all GuestFD.

Note that gdb_do_syscall %x reads target_ulong, not int.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Split out the non-ARM specific portions of SYS_OPEN to a
reusable function.  This handles gdb and host file i/o.

Add helpers to validate the length of the filename string.
Prepare for usage by other semihosting by allowing the
filename length parameter to be 0, and calling strlen.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Moving this to be useful for another function
besides do_common_semihosting.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We've already loaded cs->env_ptr into a local variable; use it.
Since env is unconditionally used, we don't need a dummy use.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Move the ARM and RISCV specific helpers into
their own header file.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We already have some larger ifdef blocks for ARM and RISCV;
split out a boolean test for SYS_SYNCCACHE.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We already have some larger ifdef blocks for ARM and RISCV;
split out common_semi_stack_bottom per target.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We already have some larger ifdef blocks for ARM and RISCV;
split the function into multiple implementations per arch.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Load the entire 64-bit size value.  While we're at it,
use offsetof instead of an integer constant.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Provide the callback with consistent state -- always use
host error numbers.  The individual callback can then
decide if the errno requires conversion for the guest.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Define constants for the errno values defined by the
gdb remote fileio protocol.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We have two copies of these structures, and require them
in semihosting/ going forward.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

There were 3 copies of these flags.  Place them in the
file with gdb_do_syscall, with which they belong.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

The value is zero, and gdb always opens files in binary mode.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

This header is not private to the top-level semihosting directory,
so place it in the public include directory.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Perform the cleanup in the FIXME comment in common_semi_gdb_syscall.
Do not modify guest registers until the syscall is complete,
which in the gdbstub case is asynchronous.

In the synchronous non-gdbstub case, use common_semi_set_ret
to set the result.  Merge set_swi_errno into common_semi_cb.
Rely on the latter for combined return value / errno setting.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use common_semi_cb to return results instead of calling
set_swi_errno and common_semi_set_ret directly.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Do not read from the gdb struct stat buffer if the callback is
reporting an error. Use common_semi_cb to finish returning results.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

The err parameter is non-zero if and only if an error occured.
Use this instead of ret == -1 for determining if we need to
update the saved errno.

This fixes the errno setting of SYS_ISTTY, which returns 0 on
error, not -1.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Do not store 'err' into errno only to read it back immediately.
Use 'ret' for the return value, not 'reg0'.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

In arm-compat-semi.c, we have more advanced treatment of
guest file descriptors than we do in other implementations.
Split out GuestFD and related functions to a new file so
that they can be shared.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We are not currently bounding the search to the 1024 bytes
that we allocated, possibly overrunning the buffer.
Use softmmu_strlen_user to find the length and allocate the
correct size from the beginning.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Mirror the interface of the user-only function of the same name.
Use probe_access_flags for the common case of ram, and
cpu_memory_rw_debug for the uncommon case of mmio.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Use probe_access_flags (pmm)

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Rather that static (and not even inline) functions within a
header, move the functions to semihosting/uaccess.c.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

While CONFIG_SEMIHOSTING is currently only set for softmmu,
this will not continue to be true.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We were reporting unconditional success for these functions;
pass on any failure from cpu_memory_rw_debug.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We have a subdirectory for semihosting; move this file out of exec.
Rename to emphasize the contents are a replacement for the functions
in linux-user/bsd-user uaccess.c.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>