Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job.  When the caller does, the error is reported twice.  When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.

qemu_rdma_write_flush() violates this principle: it calls
error_report() via qemu_rdma_write_one().  I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.

Clean this up by converting qemu_rdma_write_one() to Error.  Bonus:
resolves a FIXME about problematic use of errno.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-41-armbru@redhat.com>

Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job.  When the caller does, the error is reported twice.  When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.

qio_channel_rdma_writev() violates this principle: it calls
error_report() via qemu_rdma_write_flush().  I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.

Clean this up by converting qemu_rdma_write_flush() to Error.

Necessitates setting an error when qemu_rdma_write_one() failed.
Since this error will go away later in this series, simply use "FIXME
temporary error message" there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-40-armbru@redhat.com>

Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job.  When the caller does, the error is reported twice.  When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.

qemu_rdma_exchange_send() violates this principle: it calls
error_report() via callback qemu_rdma_reg_whole_ram_blocks().  I
elected not to investigate how callers handle the error, i.e. precise
impact is not known.

Clean this up by converting the callback to Error.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-39-armbru@redhat.com>

Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job.  When the caller does, the error is reported twice.  When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.

qemu_rdma_exchange_send() and qemu_rdma_exchange_recv() violate this
principle: they call error_report() via
qemu_rdma_exchange_get_response().  I elected not to investigate how
callers handle the error, i.e. precise impact is not known.

Clean this up by converting qemu_rdma_exchange_get_response() to
Error.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-38-armbru@redhat.com>

Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job.  When the caller does, the error is reported twice.  When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.

qio_channel_rdma_writev() violates this principle: it calls
error_report() via qemu_rdma_exchange_send().  I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.

Clean this up by converting qemu_rdma_exchange_send() to Error.

Necessitates setting an error when qemu_rdma_post_recv_control(),
callback(), or qemu_rdma_exchange_get_response() failed.  Since these
errors will go away later in this series, simply use "FIXME temporary
error message" there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-37-armbru@redhat.com>

Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job.  When the caller does, the error is reported twice.  When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.

qio_channel_rdma_readv() violates this principle: it calls
error_report() via qemu_rdma_exchange_recv().  I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.

Clean this up by converting qemu_rdma_exchange_recv() to Error.

Necessitates setting an error when qemu_rdma_exchange_get_response()
failed.  Since this error will go away later in this series, simply
use "FIXME temporary error message" there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-36-armbru@redhat.com>

These guards are all redundant now.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-35-armbru@redhat.com>

qemu_rdma_resolve_host() and qemu_rdma_dest_init() iterate over
addresses to find one that works, holding onto the first Error from
qemu_rdma_broken_ipv6_kernel() for use when no address works.  Issues:

1. If @errp was &error_abort or &error_fatal, we'd terminate instead
   of trying the next address.  Can't actually happen, since no caller
   passes these arguments.

2. When @errp is a pointer to a variable containing NULL, and
   qemu_rdma_broken_ipv6_kernel() fails, the variable no longer
   contains NULL.  Subsequent iterations pass it again, violating
   Error usage rules.  Dangerous, as setting an error would then trip
   error_setv()'s assertion.  Works only because
   qemu_rdma_broken_ipv6_kernel() and the code following the loops
   carefully avoids setting a second error.

3. If qemu_rdma_broken_ipv6_kernel() fails, and then a later iteration
   finds a working address, @errp still holds the first error from
   qemu_rdma_broken_ipv6_kernel().  If we then run into another error,
   we report the qemu_rdma_broken_ipv6_kernel() failure instead.

4. If we don't run into another error, we leak the Error object.

Use a local error variable, and propagate to @errp.  This fixes 3. and
also cleans up 1 and partly 2.

Free this error when we have a working address.  This fixes 4.

Pass the local error variable to qemu_rdma_broken_ipv6_kernel() only
until it fails.  Pass null on any later iterations.  This cleans up
the remainder of 2.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-34-armbru@redhat.com>

ERROR() has become "error_setg() unless an error has been set
already".  Hiding the conditional in the macro is in the way of
further work.  Replace the macro uses by their expansion, and delete
the macro.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-33-armbru@redhat.com>

Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job.  When the caller does, the error is reported twice.  When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.

Macro ERROR() violates this principle.  Delete the error_report()
there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-32-armbru@redhat.com>

When migration capability @rdma-pin-all is true, but the server cannot
honor it, qemu_rdma_connect() calls macro ERROR(), then returns
success.

ERROR() sets an error.  Since qemu_rdma_connect() returns success, its
caller rdma_start_outgoing_migration() duly assumes @errp is still
clear.  The Error object leaks.

ERROR() additionally reports the situation to the user as an error:

    RDMA ERROR: Server cannot support pinning all memory. Will register memory dynamically.

Is this an error or not?  It actually isn't; we disable @rdma-pin-all
and carry on.  "Correcting" the user's configuration decisions that
way feels problematic, but that's a topic for another day.

Replace ERROR() by warn_report().  This plugs the memory leak, and
emits a clearer message to the user.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-31-armbru@redhat.com>

When a function returns 0 on success, negative value on error,
checking for non-zero suffices, but checking for negative is clearer.
So do that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-30-armbru@redhat.com>

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-29-armbru@redhat.com>

All we do with the value of RDMAContext member @error_state is test
whether it's zero.  Change to bool and rename to @errored.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-28-armbru@redhat.com>

This is just to make the error value more obvious.  Callers don't
mind.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-27-armbru@redhat.com>

Several functions return negative errno codes on failure.  Callers
check for specific codes exactly never.  For some of the functions,
callers couldn't check even if they wanted to, because the functions
also return negative values that aren't errno codes, leaving readers
confused on what the function actually returns.

Clean up and simplify: return -1 instead of negative errno code.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-26-armbru@redhat.com>

rdma_getaddrinfo() returns 0 on success.  On error, it returns one of
the EAI_ error codes like getaddrinfo() does, or -1 with errno set.
This is broken by design: POSIX implicitly specifies the EAI_ error
codes to be non-zero, no more.  They could clash with -1.  Nothing we
can do about this design flaw.

Both callers of rdma_getaddrinfo() only recognize negative values as
error.  Works only because systems elect to make the EAI_ error codes
negative.

Best not to rely on that: change the callers to treat any non-zero
value as failure.  Also change them to return -1 instead of the value
received from getaddrinfo() on failure, to avoid positive error
values.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-25-armbru@redhat.com>

The QEMUFileHooks methods don't come with a written contract.  Digging
through the code calling them, we find:

* save_page():

  Negative values RAM_SAVE_CONTROL_DELAYED and
  RAM_SAVE_CONTROL_NOT_SUPP are special.  Any other negative value is
  an unspecified error.

  qemu_rdma_save_page() returns -EIO or rdma->error_state on error.  I
  believe the latter is always negative.  Nothing stops either of them
  to clash with the special values, though.  Feels unlikely, but fix
  it anyway to return only the special values and -1.

* before_ram_iterate(), after_ram_iterate():

  Negative value means error.  qemu_rdma_registration_start() and
  qemu_rdma_registration_stop() comply as far as I can tell.  Make
  them comply *obviously*, by returning -1 on error.

* hook_ram_load:

  Negative value means error.  rdma_load_hook() already returns -1 on
  error.  Leave it alone.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-24-armbru@redhat.com>

qemu_rdma_data_init() neglects to set an Error when it fails because
@host_port is null.  Fortunately, no caller passes null, so this is
merely a latent bug.  Drop the flawed code handling null argument.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-23-armbru@redhat.com>

qemu_get_cm_event_timeout() neglects to set an error when it fails
because rdma_get_cm_event() fails.  Harmless, as its caller
qemu_rdma_connect() substitutes a generic error then.  Fix it anyway.

qemu_rdma_connect() also sets the generic error when its own call of
rdma_get_cm_event() fails.  Make the error handling more obvious: set
a specific error right after rdma_get_cm_event() fails.  Delete the
generic error.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-22-armbru@redhat.com>

qemu_rdma_resolve_host() and qemu_rdma_dest_init() try addresses until
they find on that works.  If none works, they return the first Error
set by qemu_rdma_broken_ipv6_kernel(), or else return a generic one.

qemu_rdma_broken_ipv6_kernel() neglects to set an Error when
ibv_open_device() fails.  If a later address fails differently, we use
that Error instead, or else the generic one.  Harmless enough, but
needs fixing all the same.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-21-armbru@redhat.com>

Hiding return statements in macros is a bad idea.  Use a function
instead, and open code the return part.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-20-armbru@redhat.com>

QIOChannelClass methods qio_channel_rdma_readv() and
qio_channel_rdma_writev() violate their method contract when
rdma->error_state is non-zero:

1. They return whatever is in rdma->error_state then.  Only -1 will be
   fine.  -2 will be misinterpreted as "would block".  Anything less
   than -2 isn't defined in the contract.  A positive value would be
   misinterpreted as success, but I believe that's not actually
   possible.

2. They neglect to set an error then.  If something up the call stack
   dereferences the error when failure is returned, it will crash.  If
   it ignores the return value and checks the error instead, it will
   miss the error.

Crap like this happens when return statements hide in macros,
especially when their uses are far away from the definition.

I elected not to investigate how callers are impacted.

Expand the two bad macro uses, so we can set an error and return -1.
The next commit will then get rid of the macro altogether.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-19-armbru@redhat.com>

Several error messages include numeric error codes returned by failed
functions:

* ibv_poll_cq() returns an unspecified negative value.  Useless.

* rdma_accept and rdma_get_cm_event() return -1.  Useless.

* qemu_rdma_poll() returns either -1 or an unspecified negative
  value.  Useless.

* qemu_rdma_block_for_wrid(), qemu_rdma_write_flush(),
  qemu_rdma_exchange_send(), qemu_rdma_exchange_recv(),
  qemu_rdma_write() return a negative value that may or may not be an
  errno value.  While reporting human-readable errno
  information (which a number is not) can be useful, reporting an
  error code that may or may not be an errno value is useless.

Drop these error codes from the error messages.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-18-armbru@redhat.com>

We use errno after calling Libibverbs functions that are not
documented to set errno (manual page does not mention errno), or where
the documentation is unclear ("returns [...] the value of errno on
failure").  While this could be read as "sets errno and returns it",
a glance at the source code[*] kills that hope:

    static inline int ibv_post_send(struct ibv_qp *qp, struct ibv_send_wr *wr,
                                    struct ibv_send_wr **bad_wr)
    {
            return qp->context->ops.post_send(qp, wr, bad_wr);
    }

The callback can be

    static int mana_post_send(struct ibv_qp *ibqp, struct ibv_send_wr *wr,
                              struct ibv_send_wr **bad)
    {
            /* This version of driver supports RAW QP only.
             * Posting WR is done directly in the application.
             */
            return EOPNOTSUPP;
    }

Neither of them touches errno.

One of these errno uses is easy to fix, so do that now.  Several more
will go away later in the series; add temporary FIXME commments.
Three will remain; add TODO comments.  TODO, not FIXME, because the
bug might be in Libibverbs documentation.

[*] https://github.com/linux-rdma/rdma-core.git


    commit 55fa316b4b18f258d8ac1ceb4aa5a7a35b094dcf

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-17-armbru@redhat.com>

@error_reported and @received_error are flags.  The latter is even
assigned bool true.  Change them from int to bool.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-16-armbru@redhat.com>

qemu_rdma_buffer_mergeable() is semantically a predicate.  It returns
int 0 or 1.  Return bool instead, and fix the function name's
spelling.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-15-armbru@redhat.com>

qemu_rdma_search_ram_block() can't fail.  Return void, and drop the
unreachable error handling.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-14-armbru@redhat.com>

rdma_add_block() can't fail.  Return void, and drop the unreachable
error handling.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-13-armbru@redhat.com>

When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-12-armbru@redhat.com>

include/qapi/error.h demands:

 * - Functions that use Error to report errors have an Error **errp
 *   parameter.  It should be the last parameter, except for functions
 *   taking variable arguments.

qemu_rdma_connect() does not conform.  Clean it up.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-11-armbru@redhat.com>

qemu_rdma_accept() returns 0 in some cases even when it didn't
complete its job due to errors.  Impact is not obvious.  I figure the
caller will soon fail again with a misleading error message.

Fix it to return -1 on any failure.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-10-armbru@redhat.com>

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-9-armbru@redhat.com>

qemu_rdma_exchange_get_response() compares int parameter @expecting
with uint32_t head->type.  Actual arguments are non-negative
enumeration constants, RDMAControlHeader uint32_t member type, or
qemu_rdma_exchange_recv() int parameter expecting.  Actual arguments
for the latter are non-negative enumeration constants.  Change both
parameters to uint32_t.

In qio_channel_rdma_readv(), loop control variable @i is ssize_t, and
counts from 0 up to @niov, which is size_t.  Change @i to size_t.

While there, make qio_channel_rdma_readv() and
qio_channel_rdma_writev() more consistent: change the former's @done
to ssize_t, and delete the latter's useless initialization of @len.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-8-armbru@redhat.com>

qio_channel_rdma_readv() assigns the size_t value of qemu_rdma_fill()
to an int variable before it adds it to @done / subtracts it from
@want, both size_t.  Truncation when qemu_rdma_fill() copies more than
INT_MAX bytes.  Seems vanishingly unlikely, but needs fixing all the
same.

Fixes: 6ddd2d76 (migration: convert RDMA to use QIOChannel interface)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-7-armbru@redhat.com>

We use int instead of uint64_t in a few places.  Change them to
uint64_t.

This cleans up a comparison of signed qemu_rdma_block_for_wrid()
parameter @wrid_requested with unsigned @wr_id.  Harmless, because the
actual arguments are non-negative enumeration constants.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-6-armbru@redhat.com>

wrid_desc[] uses 4001 pointers to map four integer values to strings.

print_wrid() accesses wrid_desc[] out of bounds when passed a negative
argument.  It returns null for values 2..1999 and 2001..3999.

qemu_rdma_poll() and qemu_rdma_block_for_wrid() print wrid_desc[wr_id]
and passes print_wrid(wr_id) to tracepoints.  Could conceivably crash
trying to format a null string.  I believe access out of bounds is not
possible.

Not worth cleaning up.  Dumb down to show just numeric wr_id.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-5-armbru@redhat.com>

rdma_delete_block() always returns 0, which its only caller ignores.
Return void instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-4-armbru@redhat.com>

qemu_rdma_data_init() return type is void *.  It actually returns
RDMAContext *, and all its callers assign the value to an
RDMAContext *.  Unclean.

Return RDMAContext * instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-3-armbru@redhat.com>

qemu_rdma_poll()'s return type is uint64_t, even though it returns 0,
-1, or @ret, which is int.  Its callers assign the return value to int
variables, then check whether it's negative.  Unclean.

Return int instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-2-armbru@redhat.com>