We already have 'make check-help', use the 'make vm-help' form
to display helps about VM testing. Keep the old target to not
bother old customs.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190531064341.29730-1-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Targets "clean" and "install" run make recursively in a for loop.
This ignores -j and -k.  Target "all" depends on SUBDIR/all to recurse
into each SUBDIR.  Behaves nicely with -j and -k.  Put that to use for
"clean" and "install": depend on SUBDIR/clean or SUBDIR/install,
respectively, and delete the loop.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190528082308.22032-5-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>

We make a few sub-directories recursively, in particular
$(TARGET_DIRS).

For goal "all", we do it the nice way: "all" has a prerequisite
subdir-T for each T in $(TARGET_DIRS), and T's recipe runs make
recursively.  Behaves nicely with -j and -k.

For other goals such as "clean" and "install", the recipe runs make
recursively in a for loop.  Ignores -j and -k.

The next commit will fix that for "clean" and "install".  This commit
prepares the ground by renaming the targets we use for "all" to
include the goal for the sub-make.  This will permit reusing them for
goals other than "all".

Targets subdir-T for T in $(TARGET_DIRS) run "make all" in T.  Rename
to T/all, and declare phony.

Targets romsubdir-R for R in $(ROMS) run "make" in pc-bios/R.  Default
goal is "all" for all R.  Rename to pc-bios/R/all, and declare phony.

The remainder are renamed just for consistency.

Target subdir-dtc runs "make libbft/libfdt.a" in dtc.  Rename to
dtc/all, and declare phony.

Target subdir-capstone runs make $(BUILD_DIR)/capstone/$(LIBCAPSTONE)
in $(SRC_PATH)/capstone.  Rename to capstone/all, and declare phony.

Target subdir-slirp runs "make" in $(SRC_PATH)/slirp.  Default goal is
all, which builds $(BUILD_DIR)/libslirp.a.  Rename to slirp/all, and
declare phony.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190528082308.22032-4-armbru@redhat.com>
[Add compatibility gunk to keep make working across the rename]

Fixes: 0cca7e7b
Reported-by: Bruce Rogers <BROGERS@suse.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190703045212.31039-1-kraxel@redhat.com

When commit df2943ba moved "rm -f qemu-options.def" from distclean
to clean, it also added "rm -f $$d/qemu-options.def" to the for d in
$(ALL_SUBDIRS) loop.  That file doesn't exist.  Remove the mistaken
rm.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190528082308.22032-3-armbru@redhat.com>

When commit bdf523e6 made configure generate config.status, it
added a fallback to Makefile to smooth the transition, with a TODO
"code can be removed after QEMU 1.7."  It's been more than five years.
Remove it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190528082308.22032-2-armbru@redhat.com>

The GNU make manual[1] demonstrates $(DESTDIR)$(bindir)/foo and QEMU
mostly follows that.  There are just a few instances of
$(DESTDIR)/$(bindir)/foo.  Fix these inconsistencies.

[1] https://www.gnu.org/software/make/manual/html_node/DESTDIR.html



Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190521145318.12787-1-stefanha@redhat.com
Message-Id: <20190521145318.12787-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

The configure script breaks when the qemu source directory is in a path
containing white spaces, in particular the list of targets is not
correctly generated when calling "./configure --help" because of how the
default_target_list variable is built.

In addition to that, *building* qemu from a directory with spaces breaks
some assumptions in the Makefiles, even if the original source path does
not contain spaces like in the case of an out-of-tree build, or when
symlinks are involved.

To avoid these issues, refuse to run the configure script and the
Makefile if there are spaces or colons in the source path or the build
path, taking as inspiration what the kbuild system in linux does.

Buglink: https://bugs.launchpad.net/qemu/+bug/1817345



Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Antonio Ospite <antonio.ospite@collabora.com>
Message-Id: <20190526144747.30019-3-ao2@ao2.it>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Now we have some rST format docs in the docs/specs/ manual, we should
actually build and install it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-id: 20190610152444.20859-3-peter.maydell@linaro.org

Add a vhost-user gpu backend, based on virtio-gpu/3d device. It is
associated with a vhost-user-gpu device.

Various TODO and nice to have items:
- multi-head support
- crash & resume handling
- accelerated rendering/display that avoids the waiting round trips
- edid support

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-6-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

Commit 337f2311 actually claimed to do this in the commit log but
didn't actually. Oops.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

For user-only, we require only the random number bits of the
crypto subsystem.  Rename crypto-aes-obj-y to crypto-user-obj-y,
and add the random number objects, plus init.o to handle any
extra stuff the crypto library requires.

Move the crypto libraries from libs_softmmu and libs_tools to
LIBS, so that they are universally used.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Add a vhost-user input backend example, based on virtio-input-host
device. It takes an evdev path as argument, and can be associated with
a vhost-user-input device via a UNIX socket:

$ vhost-user-input -p /dev/input/eventX -s /tmp/vui.sock

$ qemu ... -chardev socket,id=vuic,path=/tmp/vui.sock
  -device vhost-user-input-pci,chardev=vuic

This example is intentionally not included in $TOOLS, and not
installed by default.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190514104126.6294-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Some objects are only needed for system emulation and tools.
We can ignore them for the user mode case

Update tests to run accordingly: conditionally build some tests
on CONFIG_BLOCK.

Some tests use components that are only built when softmmu or
block tools are enabled, not for linux-user. So, if these components
are not available, disable the tests.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190401141222.30034-6-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>

Move the dependency from SUBDIR_RULES to SOFTMMU_SUBDIR_RULES

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190401141222.30034-5-lvivier@redhat.com>

When possible use generated-files-$(FLAG) to disable
some targets (like KEYCODEMAP_FILES).

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190401141222.30034-3-lvivier@redhat.com>

The Makefile tries to include device Kconfig dependencies via

 -include $(SUBDIR_DEVICES_MAK_DEP)

and thus expects files that match *-softmmu/config-devices.mak.d ...
however, the minikconf script currently generates files a la
"*-softmmu-config.devices.mak.d" instead, so the dependency files
simply got ignored so far. For example, after a "touch hw/arm/Kconfig",
the arm-softmmu/config-devices.mak file is currently not re-generated.
Fix it by putting the dependency files in the *-softmmu folders now.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

This new chapter in the QEMU documentation covers the security
requirements that QEMU is designed to meet and principles for securely
deploying QEMU.

It is just a starting point that can be extended in the future with more
information.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-id: 20190509121820.16294-3-stefanha@redhat.com
Message-Id: <20190509121820.16294-3-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Commit 48ff7a62 added the QEMU Guest Agent tool with the
optional ".exe" suffix for Windows hosts, but forgot to use
this suffix in the 'clean' rule. Calling this rule let a dangling
executable in the build directory.
Correct this by using the proper optional suffix.

Fixes: 48ff7a62
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20190427161322.24642-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Use a CONFDIR variable to show the configured sysconf path in the
generated documentations (html, man pages etc).

Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1644985



Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181126105125.30973-1-marcandre.lureau@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

CFLAGS/LDFLAGS have debug and sanitizers flags, which should be passed
to slirp compilation.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190424110041.8175-2-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>

If we add references that don't resolve (or accidentally remove them),
it will be helpful to have warning messages alerting us to that.

Further, turn those warnings into errors so we can be alerted to these
problems sooner rather than later.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190426221528.30293-2-jsnow@redhat.com
[adjusted commit message. --js]
Signed-off-by: John Snow <jsnow@redhat.com>

Decompress and install the edk2 firmware blobs as part of "make install",
unless blob installation was disabled with configure's "--disable-blobs"
option.

Additionally, decompress the blobs as a pre-requisite for building softmmu
binaries -- this is helpful for both "make check" and other ad-hoc tests
one might want to run in the build directory.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

This ensures that softmmu directories are culled after a
"./configure --target-list=x86_64-linux-user".

Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

For devices that require msi_init/msix_init to succeed, add a
dependency on CONFIG_MSI_NONBROKEN.  This will prevent those devices
from appearing in a binary that cannot instantiate them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This patch adds support for VHOST_USER_GET_INFLIGHT_FD and
VHOST_USER_SET_INFLIGHT_FD message to set/get shared buffer
to/from qemu. Then backend can track inflight I/O in this buffer.

Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190228085355.9614-5-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Best to be explicit about where to find things.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>

In an out-of-tree build gcovr can get quite confused about what is
going on otherwise.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>

If we're doing an out-of-tree build of Sphinx, then we
copy some extra spurious files to the install directory
as part of 'make install':
qemu-ga-qapi.texi
qemu-ga-ref.7
qemu-ga-ref.7.pod
qemu-ga-ref.html
qemu-ga-ref.txt
qemu-qmp-qapi.texi
qemu-qmp-ref.7
qemu-qmp-ref.7.pod
qemu-qmp-ref.html
qemu-qmp-ref.txt

because these have been built into build/docs/interop along
with the Sphinx interop documents. Filter them out of the
set of files we install when we're installing the Sphinx-built
manual files. (They are installed into their correct locations
as part of the main install-doc target already.)

Fixes: 5f71eac0 ("Makefile, configure: Support building rST documentation")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190308135744.6480-4-peter.maydell@linaro.org

We forgot the '-r' option on the rm command to clean up the
Sphinx .doctrees working directory, which meant that
"make distclean" fails:
 rm: cannot remove '.doctrees': Is a directory

Add the missing option.

Fixes: 5f71eac0 ("Makefile, configure: Support building rST documentation")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190308135744.6480-3-peter.maydell@linaro.org

The Sphinx build-sphinx tool does not permit building a manual
into the same directory as its source files. This meant that
commit 5f71eac0 broke QEMU in-source-tree
builds, which would fail with:
  Error: source directory and destination directory are same.

Fix this by making in-tree builds build the Sphinx manuals
into a subdirectory of docs/.

Fixes: 5f71eac0 ("Makefile, configure: Support building rST documentation")
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190308135744.6480-2-peter.maydell@linaro.org

Apart from defconfig (which is a no-op),
allyesconfig/allnoconfig/randcondfig can be implemented simply by ignoring
the RHS of assignments and "default" statements.  The RHS is replaced
respectively by "true", "false" or a random value.

However, allyesconfig and randconfig do not quite work, because all the
files for hw/ARCH/Kconfig are sourced and therefore you could end up
enabling some ARM boards in x86 or things like that.  This is left for
future work, but I am leaving it in to help debugging minikconf itself.

allnoconfig mode is tied to a new configure option, --without-default-devices.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.

The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig.  One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script.  This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Don't hard-code the QEMU version number into conf.py. Instead
we either pass it to sphinx-build on the command line, or
(if doing a standalone Sphinx run in a readthedocs.org setup)
extract it from the VERSION file.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-12-peter.maydell@linaro.org
Message-id: 20190228145624.24885-12-peter.maydell@linaro.org

Abstract out the "identify the pkgversion" code from the
rule for creating qemu-version.h, so it sets makefile
variables for QEMU_PKGVERSION and QEMU_FULL_VERSION.
(We will want to use these when building the Sphinx docs.)

NB: As we abstract this out, we use -e to check for .git
rather than -d, since in some situations .git may be a file
rather than a directory.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-11-peter.maydell@linaro.org
Message-id: 20190228145624.24885-11-peter.maydell@linaro.org

Add support to our configure and makefile machinery for building
our rST docs into HTML files.

Building the documentation now requires that sphinx-build is
available; this seems better than allowing half the docs to
be built if it is not present but having half of them missing.
(In particular it means that assuming that distros configured with
--enable-docs they'll get a helpful error from configure telling
them the new build dependency.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-10-peter.maydell@linaro.org
Message-id: 20190228145624.24885-10-peter.maydell@linaro.org

Use the "system" libslirp if its present or requested.

Else build with a static libslirp.a if slirp/ is checked
out ("internal") or a submodule ("git").

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-7-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>

The current qemu_acl module provides a simple access control list
facility inside QEMU, which is used via a set of monitor commands
acl_show, acl_policy, acl_add, acl_remove & acl_reset.

Note there is no ability to create ACLs - the network services (eg VNC
server) were expected to create ACLs that they want to check.

There is also no way to define ACLs on the command line, nor potentially
integrate with external authorization systems like polkit, pam, ldap
lookup, etc.

The QAuthZ object defines a minimal abstract QOM class that can be
subclassed for creating different authorization providers.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>

The roms/edk2 submodule can help with three goals:
- build the OVMF and ArmVirtQemu virtual UEFI firmware platforms (to be
  implemented later),
- build the EfiRom tool on the fly, which is used in roms/Makefile, for
  building the "efirom" target,
- build UEFI test applications (to be run in guests), for qtest support.

Edk2 commit 85588389222a3636baf0f9ed8227f2434af4c3f9 stands for the latest
"stable tag", namely "edk2-stable201811".

The edk2 repository tracks some binary files that should not be removed by
QEMU's top-level "make clean"; exempt the full pathnames from the "find"
command.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20190204160325.4914-2-lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>