This is a *third* way to run the Python tests. Unlike the first two
(check-pipenv, check-tox), this version does not require any specific
interpreter version -- making it a lot easier to tell people to run it
as a quick smoketest prior to submission to GitLab CI.

Summary:

  Checked via GitLab CI:
    - check-pipenv: tests our oldest python & dependencies
    - check-tox: tests newest dependencies on all non-EOL python versions
  Executed only incidentally:
    - check-dev: tests newest dependencies on whichever python version

('make check' does not set up any environment at all, it just runs the
tests in your current environment. All four invocations perform the
exact same tests, just in different execution environments.)

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-12-jsnow@redhat.com
[Maintainer edit: added .dev-venv/ to .gitignore. --js]
Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

flake8 is a little eager to check everything it can. Limit it to
checking inside the qemu namespace directory only. Update setup.cfg now
that the exclude patterns are no longer necessary.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

I missed the 'check-tox' target. Add that, but split the large .PHONY
specifier at the top into its component pieces and move them near the
targets they describe so that they're much harder to forget to update.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210629214323.1329806-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

Move it up near the check-pipenv help text, and update it to suggest parity.

(At the time I first added it, I wasn't sure if I would be keeping it,
but I've come to appreciate it as it has actually helped uncover bugs I
would not have noticed without it. It should stay.)

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

Well, Cleber was right, this is a better name.

In preparation for adding a different kind of virtual environment check
(One that simply uses whichever version of Python you happen to have),
rename this test 'check-pipenv' so that it matches the CI job
'check-python-pipenv'.

Remove the "If you don't know which test to run" hint, because it's not
actually likely you have Python 3.6 installed to be able to run the
test. It's still the test I'd most prefer you to run, but it's not the
test you are most likely to be able to run.

Rename the 'venv' target to 'pipenv' as well, and move the more
pertinent help text under the 'check-pipenv' target.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

It's not encouraged, but it's legitimate to want to know how to do.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

Clarifying a few points; removing the reference to 'setuptools' because
it isn't referenced anywhere else in this document and doesn't really
provide any useful information to a Python newcomer.

Adjusting the language elsewhere to be less ambiguous and have fewer
run-on sentences.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

tox is already testing the most recent versions. Let's use pipenv to
test the oldest versions we claim to support. This matches the stylistic
choice to have pipenv always test our oldest supported Python version, 3.6.

The effect of this is that the python-check-pipenv CI job on gitlab will
now test against much older versions of these linters, which will help
highlight incompatible changes that might otherwise go unnoticed.

Update instructions for adding and bumping versions in setup.cfg. The
reason for deleting the line that gets added to Pipfile is largely just
to avoid having the version minimums specified in multiple places in
config checked into the tree.

(This patch was written by deleting Pipfile and Pipfile.lock, then
explicitly installing each dependency manually at a specific
version. Then, I restored the prior Pipfile and re-ran `pipenv lock
--dev --keep-outdated` to re-add the qemu dependency back to the pipenv
environment while keeping the "old" packages. It's annoying, yes, but I
think the improvement to test coverage is worthwhile.)

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

These suppressions only apply to a small handful of places. Instead of
disabling them globally, disable them just in the cases where we
need. The design of the machine class grew quite organically with tons
of constructor and class instance variables -- there's little chance of
meaningfully refactoring it in the near term, so just suppress the
warnings for that class.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

https://www.python.org/dev/peps/pep-0561/#specification



Create 'py.typed' files in each subpackage that indicate to mypy that
this is a typed module, so that users of any of these packages can use
mypy to check their code as well.

Note: Theoretically it's possible to ditch MANIFEST.in in favor of using
package_data in setup.cfg, but I genuinely could not figure out how to
get it to include things from the *source root* into the *package root*;
only how to include things from each subpackage. I tried!

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

Pylint updated to 2.9.0 upstream, adding new warnings for things that
re-use the 'err' variable. Luckily, this only breaks the
python-check-tox job, which is allowed to fail as a warning.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210629214323.1329806-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

Fixes for bugs found by inspection and internal testing
Tests added to tests/tcg/hexagon/misc.c

# gpg: Signature made Tue 29 Jun 2021 17:50:16 BST
# gpg:                using RSA key 7B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5  9AB4 7B02 44FB 12DE 4422

* remotes/quic/tags/pull-hex-20210629:
  Hexagon (target/hexagon) remove unused TCG variables
  Hexagon (target/hexagon) cleanup gen_store_conditional[48] functions
  Hexagon (target/hexagon) fix l2fetch instructions
  Hexagon (target/hexagon) fix bug in fLSBNEW*

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-5-git-send-email-tsimpson@quicinc.com>

Previously the store-conditional code was writing to hex_pred[prednum].
Then, the fGEN_TCG override was reading from there to the destination
variable so that the packet commit logic would handle it properly.

The correct implementation is to write to the destination variable
and don't have the extra read in the override.

Remove the unused arguments from gen_store_conditional[48]

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-4-git-send-email-tsimpson@quicinc.com>

Y4_l2fetch == l2fetch(Rs32, Rt32)
Y5_l2fetch == l2fetch(Rs32, Rtt32)

The semantics for these instructions are present, but the encodings
are missing.

Note that these are treated as nops in qemu, so we add overrides.

Test case added to tests/tcg/hexagon/misc.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-3-git-send-email-tsimpson@quicinc.com>

Change fLSBNEW/fLSBNEW0/fLSBNEW1 from copy to "x & 1"
Remove gen_logical_not function
Clean up fLSBNEWNOT to use andi-1 followed by xori-1

Test cases added to tests/tcg/hexagon/misc.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-2-git-send-email-tsimpson@quicinc.com>

Fixes for NetBSD/alpha:
  - Provide a proper PCI-ISA bridge
  - Set PCI device IDs correctly
  - Pass -nographic flag to PALcode
  - Update PALcode to set up the Console Terminal Block
  - Honor the Floating-point ENable bit during translate.

# gpg: Signature made Mon 28 Jun 2021 15:34:08 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-axp-20210628:
  target/alpha: Honor the FEN bit
  pc-bios: Update the palcode-clipper image
  hw/alpha: Provide a PCI-ISA bridge device node
  hw/alpha: Provide console information to the PALcode at start-up
  hw/alpha: Set minimum PCI device ID to 1 to match Clipper IRQ mappings

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

* Some Meson test conversions
* KVM dirty page ring buffer fix
* KVM TSC scaling support
* Fixes for SG_IO with /dev/sdX devices
* (Non)support for host devices on iOS
* -smp cleanups

# gpg: Signature made Fri 25 Jun 2021 15:16:18 BST
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (28 commits)
  machine: reject -smp dies!=1 for non-PC machines
  machine: pass QAPI struct to mc->smp_parse
  machine: add error propagation to mc->smp_parse
  machine: move common smp_parse code to caller
  machine: move dies from X86MachineState to CpuTopology
  file-posix: handle EINTR during ioctl
  block: detect DKIOCGETBLOCKCOUNT/SIZE before use
  block: try BSD disk size ioctls one after another
  block: check for sys/disk.h
  block: feature detection for host block support
  file-posix: try BLKSECTGET on block devices too, do not round to power of 2
  block: add max_hw_transfer to BlockLimits
  block-backend: align max_transfer to request alignment
  osdep: provide ROUND_DOWN macro
  scsi-generic: pass max_segments via max_iov field in BlockLimits
  file-posix: fix max_iov for /dev/sg devices
  KVM: Fix dirty ring mmap incorrect size due to renaming accident
  configure, meson: convert libusbredir detection to meson
  configure, meson: convert libcacard detection to meson
  configure, meson: convert libusb detection to meson
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

block: Make block-copy API thread-safe

# gpg: Signature made Fri 25 Jun 2021 13:40:24 BST
# gpg:                using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB
# gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8B9C 26CD B2FD 147C 880E  86A1 561F 24C1 F19F 79FB

* remotes/vsementsov/tags/pull-jobs-2021-06-25:
  block-copy: atomic .cancelled and .finished fields in BlockCopyCallState
  block-copy: add CoMutex lock
  block-copy: move progress_set_remaining in block_copy_task_end
  block-copy: streamline choice of copy_range vs. read/write
  block-copy: small refactor in block_copy_task_entry and block_copy_common
  co-shared-resource: protect with a mutex
  progressmeter: protect with a mutex
  blockjob: let ratelimit handle a speed of 0
  block-copy: let ratelimit handle a speed of 0
  ratelimit: treat zero speed as unlimited

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

This bit is used by NetBSD for lazy fpu migration.

Tested-by: Jason Thorpe <thorpej@me.com>
Reported-by: Jason Thorpe <thorpej@me.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/438


Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Build a new palcode image with Jason Thorpe's patches
to support NetBSD.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

- Move initialization of the ISA bus from typhoon_init() to clipper_init();
  this apsect of device topology is really associated with the individual
  model, not the core logic chipset.  typhoon_init() now returns the IRQ
  to use for the output of the ISA PIC.

- In clipper_init(), instantiate an i82378 instance, and connect its
  PIC output to the ISA IRQ input provided by typhoon_init().  Remove
  the explicit instantiations of i8254 and i82374, as these devices
  are subsumed by the i82378.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Thorpe <thorpej@me.com>
Message-Id: <20210616141538.25436-1-thorpej@me.com>
[rth: Remove direct dependencies on i82374, i8254, i8259.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Redefine the a2 register passed by Qemu at start-up to also include
some configuration flags, in addition to the CPU count, and define
a flag to mirror the "-nographic" option.

Signed-off-by: Jason Thorpe <thorpej@me.com>
Message-Id: <20210613211549.18094-5-thorpej@me.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Since we are emulating a Clipper device topology, we need to set the
minimum PCI device ID to 1, as there is no IRQ mapping for a device
at ID 0 (see sys_dp264.c:clipper_map_irq()).

- Add a 'devfn_min' argument to typhoon_init().  Pass that argument
  along to pci_register_root_bus().
- In clipper_init(), pass PCI_DEVFN(1, 0) as the minimum PCI device
  ID/function.

Signed-off-by: Jason Thorpe <thorpej@me.com>
Message-Id: <20210613211549.18094-3-thorpej@me.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

FDC Pull request

# gpg: Signature made Fri 25 Jun 2021 13:54:17 BST
# gpg:                using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* remotes/jsnow-gitlab/tags/floppy-pull-request:
  hw/block/fdc: Add description to floppy controllers
  hw/block/fdc: Extract SysBus floppy controllers to fdc-sysbus.c
  hw/block/fdc: Extract ISA floppy controllers to fdc-isa.c
  hw/block/fdc: Declare shared prototypes in fdc-internal.h
  hw/block/fdc: Replace disabled fprintf() by trace event
  hw/isa/Kconfig: Fix missing dependency ISA_SUPERIO -> FDC

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

MIPS patches queue

Various fixes:
- Potential integer overflow (CID 1452921)
- Invalid emulation of nanoMIPS BPOSGE32 opcode
- Missing exception when DINSV opcode used with DSP disabled
- Do not abort but emit exception for invalid BRANCH opcodes
- TCG temporary leaks

Housekeeping:
- Remove dead code / comments
- Restrict few files to TCG, declarations to sysemu
- Merge MSA32 and MSA64 decodetree definitions

# gpg: Signature made Fri 25 Jun 2021 10:22:20 BST
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd/tags/mips-20210625:
  target/mips: Merge msa32/msa64 decodetree definitions
  target/mips: Remove pointless gen_msa()
  target/mips: Optimize regnames[] arrays
  target/mips: Constify host_to_mips_errno[]
  target/mips: fix emulation of nanoMIPS BPOSGE32 instruction
  target/mips: Remove microMIPS BPOSGE32 / BPOSGE64 unuseful cases
  target/mips: Remove SmartMIPS / MDMX unuseful comments
  target/mips: Restrict some system specific declarations to sysemu
  target/mips: Move translate.h to tcg/ sub directory
  target/mips: Move TCG trace events to tcg/ sub directory
  target/mips: Do not abort on invalid instruction
  target/mips: Raise exception when DINSV opcode used with DSP disabled
  target/mips: Fix more TCG temporary leaks in gen_pool32a5_nanomips_insn
  target/mips: Fix TCG temporary leaks in gen_pool32a5_nanomips_insn()
  target/mips: Fix potential integer overflow (CID 1452921)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

audio: bugfixes

# gpg: Signature made Thu 24 Jun 2021 13:16:16 BST
# gpg:                using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/audio-20210624-pull-request:
  hw/audio/sb16: Restrict I/O sampling rate range for command 41h/42h
  coreaudio: Lock only the buffer

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Third RISC-V PR for 6.1 release

 - Fix MISA in the DisasContext
 - Fix GDB CSR XML generation
 - QOMify the SiFive UART
 - Add support for the OpenTitan timer

# gpg: Signature made Thu 24 Jun 2021 13:00:26 BST
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20210624-2:
  hw/riscv: OpenTitan: Connect the mtime and mtimecmp timer
  hw/timer: Initial commit of Ibex Timer
  hw/char/ibex_uart: Make the register layout private
  hw/char: QOMify sifive_uart
  hw/char: Consistent function names for sifive_uart
  target/riscv: gdbstub: Fix dynamic CSR XML generation
  target/riscv: Use target_ulong for the DisasContext misa

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Block patch:
- Fix Coverity complaint in block/snapshot.c

# gpg: Signature made Thu 24 Jun 2021 12:42:28 BST
# gpg:                using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg:                issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1  1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2021-06-24:
  block/snapshot: Clarify goto fallback behavior

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

As part of converting -smp to a property with a QAPI type, define
the struct and use it to do the actual parsing.  machine_smp_parse
takes care of doing the QemuOpts->QAPI conversion by hand, for now.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-10-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Clean up the smp_parse functions to use Error** instead of exiting.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-9-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Most of smp_parse and pc_smp_parse is guarded by an "if (opts)"
conditional, and the rest is common to both function.  Move the
conditional and the common code to the caller, machine_smp_parse.

Move the replay_add_blocker call after all errors are checked for.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In order to make SMP configuration a Machine property, we need a getter as
well as a setter.  To simplify the implementation put everything that the
getter needs in the CpuTopology struct.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Change the '-device help' output from:

  Storage devices:
  name "floppy", bus floppy-bus, desc "virtual floppy drive"
  name "isa-fdc", bus ISA

to:

  Storage devices:
  name "floppy", bus floppy-bus, desc "virtual floppy drive"
  name "isa-fdc", bus ISA, desc "virtual floppy controller"

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-7-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

Some machines use floppy controllers via the SysBus interface,
and don't need to pull in all the SysBus code.
Extract the SysBus specific code to a new unit: fdc-sysbus.c,
and add a new Kconfig symbol: "FDC_SYSBUS".

Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-6-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

Some machines use floppy controllers via the SysBus interface,
and don't need to pull in all the ISA code.
Extract the ISA specific code to a new unit: fdc-isa.c, and
add a new Kconfig symbol: "FDC_ISA".
This allows us to remove the FIXME from commit dd0ff819
("isa: express SuperIO dependencies with Kconfig").

Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-5-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

We want to extract ISA/SysBus code from the generic fdc.c file.
First, declare the prototypes we will access from the new units
into a new local header: "fdc-internal.h".

Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-4-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-3-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

isa_superio_realize() calls isa_fdc_init_drives(), which is defined
in hw/block/fdc.c, so ISA_SUPERIO needs to select the FDC symbol.

Reported-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-2-philmd@redhat.com
Fixes: c0ff3795 ("Introduce a CONFIG_ISA_SUPERIO switch for isa-superio.c")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>