Pass %x as uint32_t and %lx as uint64_t; pass the address
of %s as uint64_t and the length as uint32_t.

Add casts in semihosting/syscalls.c from target_ulong to
uint64_t; add casts from int to uint32_t for clarity.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-28-richard.henderson@linaro.org>

This function is unused, except to implement gdb_do_syscall.
Fold the implementations together.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-27-richard.henderson@linaro.org>

Most of the syscall code is config agnostic aside from the size of
target_ulong. In preparation for the next patch move the final bits
of specialisation into the appropriate user and softmmu helpers.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230302190846.2593720-26-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-26-richard.henderson@linaro.org>

While we will continue to include this via cpu-defs it is useful to be
able to define this separately for 32 and 64 bit versions of an
otherwise target independent compilation unit.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20230302190846.2593720-25-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-25-richard.henderson@linaro.org>

Currently when we encounter a gdb that is old or not built with
multiarch in mind we fail rather messily. Try and improve the
situation by probing ahead of time and setting
HOST_GDB_SUPPORTS_ARCH=y in the relevant tcg configs. We can then skip
and give a more meaningful message if we don't run the test.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230302190846.2593720-24-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-24-richard.henderson@linaro.org>

Now we have removed any target specific bits from the core gdbstub
code we only need to build it twice. We have to jump a few meson hoops
to manually define the CONFIG_USER_ONLY symbol but it seems to work.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-23-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-23-richard.henderson@linaro.org>

Our GDB syscall support is the last chunk of code that needs target
specific support so move it to a new file. We take the opportunity to
move the syscall state into its own singleton instance and add in a
few helpers for the main gdbstub to interact with the module.

I also moved the gdb_exit() declaration into syscalls.h as it feels
pretty related and most of the callers of it treat it as such.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20230302190846.2593720-22-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-22-richard.henderson@linaro.org>

These inline helpers are all used by target specific code so move them
out of the general header so we don't needlessly pollute the rest of
the API with target specific stuff.

Note we have to include cpu.h in semihosting as it was relying on a
side effect before.

Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20230302190846.2593720-21-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-21-richard.henderson@linaro.org>

This is a hangover from the original code. addr is misleading as it is
only really a register id. While len will never exceed
MAX_PACKET_LENGTH I've used size_t as that is what strlen returns.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20230302190846.2593720-20-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-20-richard.henderson@linaro.org>

The underlying call uses vaddr and the comms API uses unsigned long
long which will always fit. We don't need to deal in target_ulong
here.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-19-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-19-richard.henderson@linaro.org>

Currently we only support replay for softmmu mode so it is a constant
false for user-mode.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20230302190846.2593720-18-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-18-richard.henderson@linaro.org>

This is needed for handling vcont packets as the way of calculating
max cpus vhanges between user and softmmu mode.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20230302190846.2593720-17-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-17-richard.henderson@linaro.org>

The two implementations are different enough to encourage having a
specialisation and we can move some of the softmmu only stuff out of
gdbstub.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-16-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-16-richard.henderson@linaro.org>

In both user and softmmu cases we are just replying with a constant.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20230302190846.2593720-15-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-15-richard.henderson@linaro.org>

We unfortunately handle the checking of packet acknowledgement
differently for user and softmmu modes. Abstract the user mode stuff
behind gdb_got_immediate_ack with a stub for softmmu.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-14-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-14-richard.henderson@linaro.org>

We don't really need a table for mapping two symbols.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-13-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-13-richard.henderson@linaro.org>

The process was pretty similar to the softmmu move except we take the
time to split stuff between user.c and user-target.c to avoid as much
target specific compilation as possible. We also start to make use of
our shiny new header scheme so the user-only helpers can be included
without the rest of the exec/gsbstub.h cruft.

As before we split some functions into user and softmmu versions

Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20230302190846.2593720-12-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-12-richard.henderson@linaro.org>

This is mostly code motion but a number of things needed to be done
for this minimal patch set:

  - move shared structures to internals.h
  - splitting some functions into user and softmmu versions
  - fixing a few casting issues to keep softmmu common

More CONFIG_USER_ONLY stuff will be handled in a following patches.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20230302190846.2593720-11-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-11-richard.henderson@linaro.org>

We will be needing to use these helpers between the user and softmmu
files so declare them in the headers, add a system prefix and remove
static from the implementations.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20230302190846.2593720-10-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-10-richard.henderson@linaro.org>

These will be needed from multiple places in the code. They are
declared as inline so move to the header and fix up to modern coding
style.

The only other place that messes with hex stuff at the moment is the
URI handling in utils but that would be more code churn so leave for
now.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-9-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-9-richard.henderson@linaro.org>

This aids subsystems (like gdbstub) that want to trigger a flush
without pulling target specific headers.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20230302190846.2593720-8-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-8-richard.henderson@linaro.org>

We are about to split softmmu and user mode helpers into different
files. To facilitate this we will need to share access to the GDBState
between those files.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20230302190846.2593720-7-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-7-richard.henderson@linaro.org>

In preparation for moving user/softmmu specific bits from the main
gdbstub file we need to separate the connection details into a
user/softmmu state. As these will eventually be defined in their own
files we move them out of the common GDBState structure.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20230302190846.2593720-6-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-6-richard.henderson@linaro.org>

Otherwise checkpatch will throw a hissy fit on the later patches that
split this function up.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230302190846.2593720-5-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-5-richard.henderson@linaro.org>

Prototypes using gdb_syscall_complete_cb() or gdb_?et_reg_cb()
don't depend on "cpu.h", thus are not target-specific.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221214143659.62133-1-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-4-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-4-richard.henderson@linaro.org>

When I started splitting gdbstub apart I was a little too boilerplate
with my file headers. Fix up to carry over Fabrice's copyright and the
LGPL license header.

Fixes: ae7467b1 (gdbstub: move breakpoint logic to accel ops)
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-3-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-3-richard.henderson@linaro.org>

Use something more specific to avoid name clashes.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-2-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-2-richard.henderson@linaro.org>

Sixth RISC-V PR for 8.0

* Support for the Zicbiom, ZCicboz, and Zicbop extensions.
* OpenSBI has been updated to version 1.2, see
  <https://github.com/riscv-software-src/opensbi/releases/tag/v1.2> for
  the release notes.
* Support for setting the virtual address width (ie, sv39/sv48/sv57) on
  the command line.
* Support for ACPI on RISC-V.

# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmQGYGgTHHBhbG1lckBk
# YWJiZWx0LmNvbQAKCRAuExnzX7sYidmyEAC6FEMbbFM5D++qR6w6xM6hXgzcrev6
# s1kyRRNVa45uSA78ti/Zi0hsDLNf7ZsNPndF0OIkkO5iAE0OVm3LU7tV1TqKcT82
# Dd9VXxe93zEmfnuJazHrMa54SXPhhnNdWHtKlZ6vBfZpbxgx0FFs50xkCsrM5LQZ
# hYHxQUqPWQTvF2MdDHrxCuLcdKl+Wg3ysCcgRh2d049KUBrIu6vNaHC2+AGRjCbj
# BkrGCkB82fTmVJjzAcVWQxLoAV12pCbJS4og1GtP8hA7WevtB39tbPin9siBKRZp
# QBeiIsg0nebkpmZGrb+xWVwlIBNe9yYwJa0KmveQk8v7L5RIzjM1mtDL91VrVljC
# KC2tfT570m0Iq2NoFMb3wd/kESHFzVDM/g+XYqRd4KSoiCNP/RbqYNQBwbMc31Tr
# E27xfA1D8w2vem0Rk20x3KgPf1Z5OmGXjq6YObTpnAzG8cZlA37qKBP+ortt5aHX
# GZSg3CAwknHHVajd4aaegkPsHxm1tRvoTfh38MwkPSNxaA9GD0nz0k9xaYDmeZ2L
# olfanNsaQEwcVUId31+7sAENg1TZU0fnj879/nxkMUCazVTdL8/mz+IoTTx0QCST
# 3+9ATWcyJUlmjbDKIs7kr1L+wJdvvHEJggPAbbPI8ekpXaLZvUYOT6ObzYKNAmwY
# wELQBn8QKXcLVA==
# =5gAt
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Mar 2023 21:51:36 GMT
# gpg:                using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg:                issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg:                 aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88  6DF8 EF4C A150 2CCB AB41
#      Subkey fingerprint: 2B3C 3747 4468 43B2 4A94  3A7A 2E13 19F3 5FBB 1889

* tag 'pull-riscv-to-apply-20230306' of https://gitlab.com/palmer-dabbelt/qemu

: (22 commits)
  MAINTAINERS: Add entry for RISC-V ACPI
  hw/riscv/virt.c: Initialize the ACPI tables
  hw/riscv/virt: virt-acpi-build.c: Add RHCT Table
  hw/riscv/virt: virt-acpi-build.c: Add RINTC in MADT
  hw/riscv/virt: Enable basic ACPI infrastructure
  hw/riscv/virt: Add memmap pointer to RiscVVirtState
  hw/riscv/virt: Add a switch to disable ACPI
  hw/riscv/virt: Add OEM_ID and OEM_TABLE_ID fields
  riscv: Correctly set the device-tree entry 'mmu-type'
  riscv: Introduce satp mode hw capabilities
  riscv: Allow user to set the satp mode
  riscv: Change type of valid_vm_1_10_[32|64] to bool
  riscv: Pass Object to register_cpu_props instead of DeviceState
  roms/opensbi: Upgrade from v1.1 to v1.2
  gitlab/opensbi: Move to docker:stable
  hw: intc: Use cpu_by_arch_id to fetch CPU state
  target/riscv: cpu: Implement get_arch_id callback
  disas/riscv Fix ctzw disassemble
  hw/riscv/virt.c: add cbo[mz]-block-size fdt properties
  target/riscv: add Zicbop cbo.prefetch{i, r, m} placeholder
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-target-arm-20230306' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * allwinner-h3: Fix I2C controller model for Sun6i SoCs
 * allwinner-h3: Add missing i2c controllers
 * Expose M-profile system registers to gdbstub
 * Expose pauth information to gdbstub
 * Support direct boot for Linux/arm64 EFI zboot images
 * Fix incorrect stage 2 MMU setup validation

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmQGB+wZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3gdQEACVfgbs77mxbOb6u8yWHKGZ
# tVnQr9KZMv2lmwt5H3ROJPXznchrIIAwdMeRgKnbI+lC5jTq9L+Q8RJch3t/EbAd
# f0VMyiPe3DzCbCrAR9cW6EWzbYnEVo3Ioj4k7qjxK6u1BIKhXz99DLYd1KRdTxnx
# BAYmcl857Uir1q2FrBVMZ/ItCLbk4ejn+YaDIawNue2/s1oGa+we473x9rosCFvp
# L9bzT3R46e0o+Mfkn1OYRmgCmURTalWPpWAxyOUFR9YbrzXleLgAKEB3o3PPcvls
# u26uxztyRMqje1q06VjUzwaLw7zN9XPhmir+NXX7KXp2/x9PZjApOpPtt0kl+6qe
# FbByKfl24O9w/OKewsJw+udCBYdYrRPm6tWv2D71iAwjBUzBJgNGe5VPRdPFtPDn
# uSRO65o34w1nPzRpAheUciZueiabYrVmIgVltFxj0JlrKGfgiYHPLVyU0Uu0K/A7
# F2kUEQIzIcWdo+c8SlvlWOEA2ojVd/KoLVLgndqr40Tk5pbc65TRS08kkVVl4cMT
# jUGscl7Dyxe+yo8+nHdycAJpnKYDllJOh2JbGv3r2FqCy5FMuIqW4hHeuUxwpE+O
# nxm7lzjnaVHSAFHdzhk9x4E4uH/GTcdWzX1EsmpgGqe5oejLJOrCINb+Dj44+Y8h
# 8aGRvE7kxMs11upxc7BcAw==
# =KIMt
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Mar 2023 15:34:04 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg:                 aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20230306' of https://git.linaro.org/people/pmaydell/qemu-arm

: (21 commits)
  hw: arm: allwinner-h3: Fix and complete H3 i2c devices
  hw: allwinner-i2c: Fix TWI_CNTR_INT_FLAG on SUN6i SoCs
  hw: arm: Support direct boot for Linux/arm64 EFI zboot images
  target/arm: Rewrite check_s2_mmu_setup
  target/arm: Diagnose incorrect usage of arm_is_secure subroutines
  target/arm: Stub arm_hcr_el2_eff for m-profile
  target/arm: Handle m-profile in arm_is_secure
  target/arm: Implement gdbstub m-profile systemreg and secext
  target/arm: Export arm_v7m_get_sp_ptr
  target/arm: Export arm_v7m_mrs_control
  target/arm: Implement gdbstub pauth extension
  target/arm: Create pauth_ptr_mask
  target/arm: Simplify iteration over bit widths
  target/arm: Add name argument to output_vector_union_type
  target/arm: Fix svep width in arm_gen_dynamic_svereg_xml
  target/arm: Hoist pred_width in arm_gen_dynamic_svereg_xml
  target/arm: Simplify register counting in arm_gen_dynamic_svereg_xml
  target/arm: Split out output_vector_union_type
  target/arm: Move arm_gen_dynamic_svereg_xml to gdbstub64.c
  target/arm: Unexport arm_gen_dynamic_sysreg_xml
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/nvme updates

* basic support for directives
* simple support for endurance groups
* emulation of flexible data placement (tp4146)

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmQF+doACgkQTeGvMW1P
# DenIEgf+MLsRQ3kKUmsgVNnPuR69M0COfyaz0AnfX6YEIL9ukFJQPsmASfPmHof5
# tCYIFyKEpZt/givmzSI1jdpm0uX2MRwLGLYRdNhEPVjo+TfGda15x7DgpBEduqjq
# mChUS2wrmgP9TZne+kTAU28pUpU7hcfrt1RkDOO86W8oJmpBeIyGe6vikVhQppKW
# fAIKvhNfN3p5Kxq1fhE6I5YzKd2vvKtBvPpZp2uFe6LHXEcVV/FPcTx3Ph+um/o6
# ScmmxowT4Wqk4EgXh1ohephlxB89aWgwLNHLHcfte6UCU9x4eSmTC2T3pf7piBaE
# pGLpzPoYk6BAurwrMuxCxYgStl6SzQ==
# =CNSk
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Mar 2023 14:34:02 GMT
# gpg:                using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [full]
# gpg:                 aka "Klaus Jensen <k.jensen@samsung.com>" [full]
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468  4272 63D5 6FC5 E55D A838
#      Subkey fingerprint: 5228 33AA 75E2 DCE6 A247  66C0 4DE1 AF31 6D4F 0DE9

* tag 'nvme-next-pull-request' of https://gitlab.com/birkelund/qemu

:
  hw/nvme: flexible data placement emulation
  hw/nvme: basic directives support
  hw/nvme: add basic endurance group support
  hw/nvme: store a pointer to the NvmeSubsystem in the NvmeNamespace
  hw/nvme: move adjustment of data_units{read,written}

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-xen-20230306' of https://xenbits.xen.org/git-http/people/aperard/qemu-dm into staging

Xen queue:

- fix for graphic passthrough with 'xenfv' machine
- fix uninitialized variable

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEE+AwAYwjiLP2KkueYDPVXL9f7Va8FAmQF8fgACgkQDPVXL9f7
# Va/nSQf/XVfmhe2W1ailKJxuvGeMLRW/tmY/dsNAZNXXBMjRYEaF4Eps51pjYdb7
# 6UUY/atT1fm9v/AYhxc+k8weIE/mxCDbaRStQUzHlrWPof1NsmEeYZ3NVdVq5w7s
# FmDCR+yiP2tcrBPhPD0aFBB7Lsayfy0P5qLFMMeeerlkZmk1O3fB04EKtus3YD1r
# hVSH+H8i5b8vg0d/5fGGrRzKalh5E2xGGUfz4ukp3+AYWNCl2m65K0JsX42+G79b
# Cg+OpeNp9CEXZSUvkfVoRxH9OJp6GpGZIHA9U3nvH31KR4OnDeCSZuCiPvoUuvZT
# Q0fd8eA4DRTEtt9gJ+ecQEpON5dcSA==
# =kvNV
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Mar 2023 14:00:24 GMT
# gpg:                using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF
# gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [marginal]
# gpg:                 aka "Anthony PERARD <anthony.perard@citrix.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5379 2F71 024C 600F 778A  7161 D8D5 7199 DF83 42C8
#      Subkey fingerprint: F80C 0063 08E2 2CFD 8A92  E798 0CF5 572F D7FB 55AF

* tag 'pull-xen-20230306' of https://xenbits.xen.org/git-http/people/aperard/qemu-dm

:
  hw/xen/xen_pt: fix uninitialized variable
  xen/pt: reserve PCI slot 2 for Intel igd-passthru

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

RISC-V ACPI related functionality for virt machine is added in
virt-acpi-build.c. Add the maintainer entry after moving the
ARM ACPI entry under the main ACPI entry.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-9-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Initialize the ACPI tables if the acpi option is not
disabled.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-8-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V ACPI platforms need to provide RISC-V Hart Capabilities
Table (RHCT). Add this to the ACPI tables.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-7-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add Multiple APIC Description Table (MADT) with the
RINTC structure for each cpu.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-6-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add basic ACPI infrastructure for RISC-V with below tables.
        1) DSDT with below basic objects
                - CPUs
                - fw_cfg
        2) FADT revision 6 with HW_REDUCED flag
        3) XSDT
        4) RSDP

Add this functionality in a new file virt-acpi-build.c and enable
building this infrastructure.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-5-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

memmap needs to be exported outside of virt.c so that
modules like acpi can use it. Hence, add a pointer field
in RiscVVirtState structure and initialize it with the
memorymap.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-4-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

ACPI will be enabled by default. Add a switch to turn off
for testing and debug purposes.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-3-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

ACPI needs OEM_ID and OEM_TABLE_ID for the machine. Add these fields
in the RISCVVirtState structure and initialize with default values.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-2-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The 'mmu-type' should reflect what the hardware is capable of so use the
new satp_mode field in RISCVCPUConfig to do that.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20230303131252.892893-6-alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>