ppc 7.0 queue:

* New SLOF for PPC970 and POWER5+ (Alexey)
* Fixes for POWER5+ pseries (Cedric)
* Updates of documentation (Leonardo and Thomas)
* First step of exception model cleanup (Fabiano)
* User created PHB3/PHB4 devices (Daniel and Cedric)

# gpg: Signature made Wed 12 Jan 2022 10:43:21 GMT
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* remotes/legoater/tags/pull-ppc-20220112: (34 commits)
  ppc/pnv: use stack->pci_regs[] in pnv_pec_stk_pci_xscom_write()
  ppc/pnv: turn pnv_phb4_update_regions() into static
  ppc/pnv: Introduce user creatable pnv-phb4 devices
  ppc/pnv: turn 'phb' into a pointer in struct PnvPhb4PecStack
  ppc/pnv: move PHB4 XSCOM init to phb4_realize()
  ppc/pnv: set phb4 properties in stk_realize()
  pnv_phb4_pec: use pnv_phb4_pec_get_phb_id() in pnv_pec_dt_xscom()
  pnv_phb4_pec.c: move pnv_pec_phb_offset() to pnv_phb4.c
  pnv_phb4.c: change TYPE_PNV_PHB4_ROOT_BUS name
  pnv_phb3.h: change TYPE_PNV_PHB3_ROOT_BUS name
  ppc/pnv: Move num_phbs under Pnv8Chip
  ppc/pnv: Complete user created PHB3 devices
  ppc/pnv: Reparent user created PHB3 devices to the PnvChip
  ppc/pnv: Introduce support for user created PHB3 devices
  pnv_phb4.c: check if root port exists in rc_config functions
  pnv_phb4.c: make pnv-phb4-root-port user creatable
  ppc/pnv: Attach PHB3 root port device when defaults are enabled
  pnv_phb4.c: add unique chassis and slot for pnv_phb4_root_port
  pnv_phb3.c: add unique chassis and slot for pnv_phb3_root_port
  target/ppc: Set the correct endianness for powernv memory dumps
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/lvivier-gitlab/tags/linux-user-for-7.0-pull-request' into staging

linux-user pull request 20220111
siginfo_t cleanup
more prtctl() update
target_struct.h cleanup

# gpg: Signature made Tue 11 Jan 2022 19:52:20 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/lvivier-gitlab/tags/linux-user-for-7.0-pull-request: (30 commits)
  linux-user: Implement capability prctls
  linux-user: Implement PR_SET_PDEATHSIG
  linux-user: Map signal number in PR_GET_PDEATHSIG
  linux-user: Do not special-case NULL for PR_GET_PDEATHSIG
  linux-user: Move target_struct.h generic definitions to generic/
  linux-user/arm: Move target_oabi_flock64 out of target_structs.h
  linux-user/xtensa: Use force_sig_fault
  linux-user/sparc: Use force_sig_fault
  linux-user/sh4: Use force_sig_fault
  linux-user/s390x: Use force_sig_fault
  linux-user/riscv: Use force_sig_fault
  linux-user/ppc: Use force_sig_fault
  linux-user/openrisc: Use force_sig_fault
  target/mips: Extract trap code into env->error_code
  target/mips: Extract break code into env->error_code
  linux-user/mips: Use force_sig_fault
  linux-user/mips: Improve do_break
  linux-user/microblaze: Fix SIGFPE si_codes
  linux-user/microblaze: Use force_sig_fault
  linux-user/m68k: Use force_sig_fault
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

pnv_pec_stk_pci_xscom_write() is pnv_pec_stk_pci_xscom_ops write
callback. It writes values into regs in the stack->nest_regs[] array.
The pnv_pec_stk_pci_xscom_read read callback, on the other hand, returns
values of the stack->pci_regs[]. In fact, at this moment, the only use
of stack->pci_regs[] is in pnv_pec_stk_pci_xscom_read(). There's no code
that is written anything in stack->pci_regs[], which is suspicious.

Considering that stack->nest_regs[] is widely used by the nested
MemoryOps pnv_pec_stk_nest_xscom_ops, in both read and write callbacks,
the conclusion is that we're writing the wrong array in
pnv_pec_stk_pci_xscom_write(). This function should write stack->pci_regs[]
instead.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220111200132.633896-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Its only callers are inside pnv_phb4.c.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220111131027.599784-6-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

This patch introduces pnv-phb4 user creatable devices that are created
in a similar manner as pnv-phb3 devices, allowing the user to interact
with the PHBs directly instead of creating PCI Express Controllers that
will create a certain amount of PHBs per controller index.

We accomplish this by doing the following:

- add a pnv_phb4_get_stack() helper to retrieve which stack an user
created phb4 would occupy;

- when dealing with an user created pnv-phb4 (detected by checking if
phb->stack is NULL at the start of phb4_realize()), retrieve its stack
and initialize its properties as done in stk_realize();

- use 'defaults_enabled()' in stk_realize() to avoid creating and
initializing a 'stack->phb' qdev that might be overwritten by an user
created pnv-phb4 device. This process is wrapped into a new helper
called pnv_pec_stk_default_phb_realize().

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220111131027.599784-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

At this moment, stack->phb is the plain PnvPHB4 device itself instead of
a pointer to the device. This will present a problem when adding user
creatable devices because we can't deal with this struct and the
realize() callback from the user creatable device.

We can't get rid of this attribute, similar to what we did when enabling
pnv-phb3 user creatable devices, because pnv_phb4_update_regions() needs
to access stack->phb to do its job. This function is called twice in
pnv_pec_stk_update_map(), which is one of the nested xscom write
callbacks (via pnv_pec_stk_nest_xscom_write()). In fact,
pnv_pec_stk_update_map() code comment is explicit about how the order of
the unmap/map operations relates with the PHB subregions.

All of this indicates that this code is tied together in a way that we
either go on a crusade, featuring lots of refactories and redesign and
considerable pain, to decouple stack and phb mapping, or we allow stack
update_map operations to access the associated PHB as it is today even
after introducing pnv-phb4 user devices.

This patch chooses the latter. Instead of getting rid of stack->phb,
turn it into a PHB pointer. This will allow us to assign an user created
PHB to an existing stack later. In this process,
pnv_pec_stk_instance_init() is removed because stack->phb is being
initialized in stk_realize() instead.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220111131027.599784-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

The 'stack->phb_regs_mr' PHB4 passthrough XSCOM initialization relies on
'stack->phb' being not NULL. Moving 'stack->phb_regs_mr' region_init()
and add_subregion() to phb4_realize() time is a natural thing to do
since it's strictly PHB related.

The remaining XSCOM initialization is also related to 'stack->phb' but
in a different manner. For instance, 'stack->nest_regs_mr'
MemoryRegionOps, 'pnv_pec_stk_nest_xscom_ops', uses
pnv_pec_stk_nest_xscom_write() as a write callback. When trying to write
the PEC_NEST_STK_BAR_EN reg, pnv_pec_stk_update_map() is called. Inside
this function, pnv_phb4_update_regions() is called twice. This function
uses 'stack->phb' to manipulate memory regions of the phb.

This is not a problem now but, when enabling user creatable phb4s, a
stack that doesn't have an associated phb (i.e. stack->phb = NULL) it
will cause a SIGINT during boot in pnv_phb4_update_regions().

All this can be avoided if all XSCOM realize is moved to phb4_realize(),
when we have certainty about the existence of 'stack->phb'. A lot of
code was moved from pnv_phb4_pec.c to pnv_phb4.c due to static constant
and variables being used but the cleaner logic is worth the trouble.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220111131027.599784-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Moving all phb4 properties setup to stk_realize() keeps this logic in
a single place instead of having it scattered between stk_realize() and
pec_realize().

'phb->index' can be retrieved using stack->stack_no and
pnv_phb4_pec_get_phb_id(), deprecating the use of 'phb-id' alias that
was being used for this purpose in pec_realize().

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220111131027.599784-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Relying on stack->phb to write the xscom DT of the PEC is something that
we won't be able to do with user creatable pnv-phb4 devices.

Hopefully, this can be done by using pnv_phb4_pec_get_phb_id(), which is
already used by pnv_pec_realize() to set the phb-id of the stack. Use
the same idea in pnv_pec_dt_xscom() to write ibm,phb-index without the
need to accessing stack->phb, since stack->phb is not granted to be !=
NULL when user creatable phbs are introduced.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220110143346.455901-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

The logic inside pnv_pec_phb_offset() will be useful in the next patch
to determine the stack that should contain a PHB4 device.

Move the function to pnv_phb4.c and make it public since there's no
pnv_phb4_pec.h header. While we're at it, add 'stack_index' as a
parameter and make the function return 'phb-id' directly. And rename it
to pnv_phb4_pec_get_phb_id() to be even clearer about the function
intent.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220110143346.455901-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Similar to what was happening with pnv-phb3 buses,
TYPE_PNV_PHB4_ROOT_BUS set to "pnv-phb4-root-bus" is a bit too long for
a default root bus name. The usual default name for theses buses in QEMU
are 'pcie', but we want to make a distinction between pnv-phb4 buses and
other PCIE buses, at least as far as default name goes, because not all
PCIE devices are attachable to a pnv-phb4 root-bus type.

Changing the default to 'pnv-phb4-root' allow us to have a shorter name
while making this bus distinct, and the user can always set its own bus
naming via the "id" attribute anyway.

This is the 'info qtree' output after this change, using a powernv9
domain with 2 sockets and default settings enabled:

qemu-system-ppc64 -m 4G -machine powernv9,accel=tcg \
     -smp 2,sockets=2,cores=1,threads=1

  dev: pnv-phb4, id ""
    index = 5 (0x5)
    chip-id = 1 (0x1)
    version = 704374636546 (0xa400000002)
    device-id = 1217 (0x4c1)
    x-config-reg-migration-enabled = true
    bypass-iommu = false
    bus: pnv-phb4-root.11
      type pnv-phb4-root
      dev: pnv-phb4-root-port, id ""
(...)
  dev: pnv-phb4, id ""
    index = 0 (0x0)
    chip-id = 1 (0x1)
    version = 704374636546 (0xa400000002)
    device-id = 1217 (0x4c1)
    x-config-reg-migration-enabled = true
    bypass-iommu = false
    bus: pnv-phb4-root.6
      type pnv-phb4-root
      dev: pnv-phb4-root-port, id ""
(..)
  dev: pnv-phb4, id ""
    index = 5 (0x5)
    chip-id = 0 (0x0)
    version = 704374636546 (0xa400000002)
    device-id = 1217 (0x4c1)
    x-config-reg-migration-enabled = true
    bypass-iommu = false
    bus: pnv-phb4-root.5
      type pnv-phb4-root
      dev: pnv-phb4-root-port, id ""
(...)
  dev: pnv-phb4, id ""
    index = 0 (0x0)
    chip-id = 0 (0x0)
    version = 704374636546 (0xa400000002)
    device-id = 1217 (0x4c1)
    x-config-reg-migration-enabled = true
    bypass-iommu = false
    bus: pnv-phb4-root.0
      type pnv-phb4-root
      dev: pnv-phb4-root-port, id ""

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220110143346.455901-11-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

The TYPE_PNV_PHB3_ROOT_BUS name is used as the default bus name when
the dev has no 'id'. However, pnv-phb3-root-bus is a bit too long to be
used as a bus name.

Most common QEMU buses and PCI controllers are named based on their bus
type (e.g. pSeries spapr-pci-host-bridge is called 'pci'). The most
common name for a PCIE bus controller in QEMU is 'pcie'. Naming it
'pcie' would break the documented use of the pnv-phb3 device, since
'pcie.0' would now refer to the root bus instead of the first root port.

There's nothing particularly wrong with the 'root-bus' name used before,
aside from the fact that 'root-bus' is being used for pnv-phb3 and
pnv-phb4 created buses, which is not quite correct since these buses
aren't implemented the same way in QEMU - you can't plug a
pnv-phb4-root-port into a pnv-phb3 root bus, for example.

This patch renames it as 'pnv-phb3-root', which is a compromise between
the existing and the previously used name. Creating 3 phbs without ID
will result in an "info qtree" output similar to this:

bus: main-system-bus
  type System
  dev: pnv-phb3, id ""
    index = 2 (0x2)
    chip-id = 0 (0x0)
    x-config-reg-migration-enabled = true
    bypass-iommu = false
    bus: pnv-phb3-root.2
      type pnv-phb3-root
(...)
  dev: pnv-phb3, id ""
    index = 1 (0x1)
    chip-id = 0 (0x0)
    x-config-reg-migration-enabled = true
    bypass-iommu = false
    bus: pnv-phb3-root.1
      type pnv-phb3-root
(...)
  dev: pnv-phb3, id ""
    index = 0 (0x0)
    chip-id = 0 (0x0)
    x-config-reg-migration-enabled = true
    bypass-iommu = false
    bus: pnv-phb3-root.0
      type pnv-phb3-root

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220105212338.49899-11-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

It is not used elsewhere so that's where it belongs.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220105212338.49899-10-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

PHB3s ared SysBus devices and should be allowed to be dynamically
created.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220105212338.49899-9-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

The powernv machine uses the object hierarchy to populate the device
tree and each device should be parented to the chip it belongs to.
This is not the case for user created devices which are parented to
the container "/unattached".

Make sure a PHB3 device is parented to its chip by reparenting the
object if necessary.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220105212338.49899-8-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

PHB3 devices and PCI devices can now be added to the powernv8 machine
using :

  -device pnv-phb3,chip-id=0,index=1 \
  -device nec-usb-xhci,bus=pci.1,addr=0x0

The 'index' property identifies the PHB3 in the chip. In case of user
created devices, a lookup on 'chip-id' is required to assign the
owning chip.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220105212338.49899-7-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

pnv_phb4_rc_config_read() and pnv_phb4_rc_config_write() are asserting
the existence of the root port. The root port is now optional, and there
will be cases where a pnv-phb4 device won't have a root port attached.

Instead of asserting, check if the root port exists before read/writing
into it.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220105212338.49899-6-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

We want to create only the absolutely minimal amount of devices when
running with -nodefaults. The root port is something that the machine
can boot up without. But, to do that, we need to provide a way for the
user to add them by hand.

This patch makes pnv-phb4-root-port user creatable and then uses the
pnv_phb_attach_root_port() helper to add a pnv_phb4_root_port only when
running with default settings.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220105212338.49899-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

This cleanups the PHB3 model a bit more since the root port is an
independent device and it will ease our task when adding user created
PHB3s.

pnv_phb_attach_root_port() is made public in pnv.c so it can be reused
with the pnv_phb4 root port later.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220105212338.49899-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

A similar situation as described previously with pnv_phb3_root_port
devices also happens with pnv_phb4_root_ports.

The solution is the same: assign an unique chassis/slot combo for them.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220105212338.49899-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

When creating a pnv_phb3_root_port using the command line, the first
root port is created successfully, but the second fails with the
following error:

qemu-system-ppc64: -device pnv-phb3-root-port,bus=phb3-root.0,id=pcie.3:
Can't add chassis slot, error -16

This error comes from the realize() function of its parent type,
rp_realize() from TYPE_PCIE_ROOT_PORT. pcie_chassis_add_slot() fails
with -EBUSY if there's an existing PCIESlot that has the same
chassis/slot value, regardless of being in a different bus.

One way to prevent this error is simply set chassis and slot values in
the command line. However, since phb3 root buses only supports a single
root port, we can just get an unique chassis/slot value by checking
which root bus the pnv_phb3_root_port is going to be attached, get the
equivalent phb3 device and use its chip-id and index values, which are
guaranteed to be unique.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220105212338.49899-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

We use the endianness of interrupts to determine which endianness to
use for the guest kernel memory dump. For machines that support HILE
(powernv8 and up) we have been always generating big endian dump
files.

This patch uses the HILE support recently added to
ppc_interrupts_little_endian to fix the endianness of the dumps for
powernv machines.

Here are two dumps created at different moments:

$ file skiboot.dump
skiboot.dump: ELF 64-bit MSB core file, 64-bit PowerPC ...

$ file kernel.dump
kernel.dump: ELF 64-bit LSB core file, 64-bit PowerPC ...

Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Next patches will split powerpc_excp in multiple family specific
handlers. This patch adds a wrapper to make the transition clearer.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

The ppc_interrupts_little_endian function is now suitable for
determining the endianness of interrupts for all CPUs.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Some CPUs set ILE via an MSR bit. We can make
ppc_interrupts_little_endian handle that case as well. Now we have a
centralized way of determining the endianness of interrupts.

This change has no functional impact.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

The ppc_interrupts_little_endian function could be used for interrupts
delivered in Hypervisor mode, so add support for powernv8 and powernv9
to it.

Also drop the comment because it is inaccurate, all CPUs that can run
little endian can have interrupts in little endian. The point is
whether they can take interrupts in an endianness different from
MSR_LE.

This change has no functional impact.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107222601.4101511-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Remove the compile time definition and make the logging be controlled
by the `-d mmu` option in the cmdline.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107222601.4101511-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Signed-off-by: Leonardo Garcia <lagarcia@br.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <3b228af4785241c7fb4a2c70f0c495d2a9adea83.1641405872.git.lagarcia@br.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Add some documentation files to the corresponding machine sections
and mention the machine names in the section titles where it is
not so obvious (e.g. that "taihu" is a 405 machine).

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220105104800.407570-1-thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

The Protected Execution Facility is only available with the pseries
machine, so let's merge the old ASCII text into the new RST file now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220105103232.405204-1-thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

ISA v2.03 introduced Floating Round to Integer instructions : frin,
friz, frip, and frim. Add them to POWER5+.

The PPC_FLOAT_EXT flag also includes the fre (Floating Reciprocal
Estimate) instruction which was introduced in ISA v2.0x. The
architecture document says its optional and that might be the reason
why it has been kept under the PPC_FLOAT_EXT flag. This means 970 CPUs
can not use it under QEMU, which doesn't seem to be a problem.

Signed-off-by: Cédric Le Goater <clg@kaod.org>

POWER5+ (ISA v2.03) processors are supported by the pseries machine
but they do not have Altivec instructions. Do not advertise support
for it in the DT.

To be noted that this test is in contradiction with the assert in
cap_vsx_apply().

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220105095142.3990430-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

popcntb instruction was added in ISA v2.02. Add support for POWER5+
processors since they implement ISA v2.03.

PPC970 CPUs implement v2.01 and do not support popcntb.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220105095142.3990430-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

* tag 'qemu-slof-20220110' of github.com:aik/qemu:
  pseries: Update SLOF firmware image

Signed-off-by: Cédric Le Goater <clg@kaod.org>

The clang in Ubuntu 18.04 (10.0.0-4ubuntu1) produces a warning
on the code added in commit f5ef0e51 where we use a
shifted expression in a boolean context:

../../linux-user/elfload.c:2423:16: error: converting the result of '<<' to a boolean always evaluates to true [-Werror,-Wtautological-constant-compare]
    } else if (LO_COMMPAGE) {
               ^
../../linux-user/elfload.c:1102:22: note: expanded from macro 'LO_COMMPAGE'
#define LO_COMMPAGE  TARGET_PAGE_SIZE
                     ^
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/cpu-all.h:231:31: note: expanded from macro 'TARGET_PAGE_SIZE'
#define TARGET_PAGE_SIZE   (1 << TARGET_PAGE_BITS)
                              ^
1 error generated.

The warning is bogus because whether LO_COMMPAGE is zero or not
depends on compile-time ifdefs; shut the compiler up by adding
an explicit comparison to zero.

Fixes: f5ef0e51 ("linux-user/nios2: Map a real kuser page")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20220111082900.3341274-1-peter.maydell@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

This is PR_CAPBSET_READ, PR_CAPBSET_DROP and the "legacy"
PR_CAP_AMBIENT PR_GET_SECUREBITS, PR_SET_SECUREBITS.

All of these arguments are integer values only, and do not
require mapping of values between host and guest.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220106225738.103012-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220106225738.103012-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Convert the host signal number to guest signal number
before returning the value to the guest.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220106225738.103012-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>