Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

Add an option to drop caches before each test run. It may probably
improve reliability of results when testing in cached mode.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

Add arguments to set number of test runs per table cell and to disable
initial run that is not counted in results.

It's convenient to set --count 1 --no-initial-run to fast run test
onece, and to set --count to some large enough number for good
precision of the results.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

Add support for qcow2 source. New option says to use test-source.qcow2
instead of test-source. Of course, test-source.qcow2 should be
precreated.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>

We should not report success if there is an error in final event.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>

Allow benchmark with different kinds of target cache.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>

Allow bench compressed backup.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

statistics.stdev raises if sequence length is less than two. Support
that case by hand.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>

Sometimes one of cells in a testing table runs too slow. And we really
don't want to wait so long. Limit number of runs in this case.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

Include cleanups.
Decodetree enhancements for power10.

# gpg: Signature made Sat 01 May 2021 19:50:22 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20210501:
  decodetree: Extend argument set syntax to allow types
  decodetree: Add support for 64-bit instructions
  decodetree: More use of f-strings
  decodetree: Introduce whex and whexC helpers
  exec: Remove accel/tcg/ from include paths

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Rather than force all structure members to be 'int',
allow the type of the member to be specified.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Allow '64' to be specified for the instruction width command line params
and use the appropriate extract and deposit functions in that case.

This will be used to implement the new 64-bit Power ISA 3.1 instructions.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Message-Id: <CP2PR80MB3668E123E2EFDB0ACD3A46F1DA759@CP2PR80MB3668.lamprd80.prod.outlook.com>
[rth: Drop the change to the field type; use bitop_width instead of separate
variables for extract/deposit; use "ull" for 64-bit constants.]
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Form a hex constant of the appropriate insnwidth.
Begin using f-strings on changed lines.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

When TCG is enabled, the accel/tcg/ include path is added to the
project global include search list. This accel/tcg/ directory
contains a header named "internal.h" which, while intented to
be internal to accel/tcg/, is accessible by all files compiled
when TCG is enabled. This might lead to problem with other
directories using the same "internal.h" header name:

  $ git ls-files | fgrep /internal.h
  accel/tcg/internal.h
  include/hw/ide/internal.h
  target/hexagon/internal.h
  target/mips/internal.h
  target/ppc/internal.h
  target/s390x/internal.h

As we don't need to expose accel/tcg/ internals to the rest of
the code base, simplify by removing it from the include search
list, and include the accel/tcg/ public headers relative to the
project root search path (which is already in the generic include
search path).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210413081008.3409459-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

QAPI patches patches for 2021-04-30

# gpg: Signature made Fri 30 Apr 2021 12:42:32 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2021-04-30: (25 commits)
  qapi/error.py: enable mypy checks
  qapi/error: Add type hints
  qapi/error.py: enable pylint checks
  qapi/error.py: move QAPIParseError to parser.py
  qapi/error: assert QAPISourceInfo is not None
  qapi/error: Make QAPISourceError 'col' parameter optional
  qapi/error: Use Python3-style super()
  qapi/error: Repurpose QAPIError as an abstract base exception class
  qapi/expr: Update authorship and copyright information
  qapi/expr.py: Use tuples instead of lists for static data
  qapi/expr.py: Add docstrings
  qapi/expr: Only explicitly prohibit 'Kind' nor 'List' for type names
  qapi/expr.py: enable pylint checks
  qapi/expr.py: Remove single-letter variable
  qapi/expr.py: Consolidate check_if_str calls in check_if
  qapi/expr.py: add type hint annotations
  qapi/expr.py: Modify check_keys to accept any Collection
  qapi/expr.py: Add casts in a few select cases
  qapi/expr.py: Check type of union and alternate 'data' member
  qapi/expr.py: move string check upwards in check_type
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Block layer patches

- Fix permission update order problems with block graph changes
- qemu-img convert: Unshare write permission for source
- vhost-user-blk: Fail gracefully on too large queue size

# gpg: Signature made Fri 30 Apr 2021 11:27:51 BST
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (39 commits)
  vhost-user-blk: Fail gracefully on too large queue size
  qemu-img convert: Unshare write permission for source
  block: Add BDRV_O_NO_SHARE for blk_new_open()
  block: refactor bdrv_node_check_perm()
  block: rename bdrv_replace_child_safe() to bdrv_replace_child()
  block: refactor bdrv_child_set_perm_safe() transaction action
  block: inline bdrv_replace_child()
  block: inline bdrv_check_perm_common()
  block: drop unused permission update functions
  block: bdrv_reopen_multiple: refresh permissions on updated graph
  block: bdrv_reopen_multiple(): move bdrv_flush to separate pre-prepare
  block: add bdrv_set_backing_noperm() transaction action
  block: make bdrv_refresh_limits() to be a transaction action
  block: make bdrv_unset_inherits_from to be a transaction action
  block: drop ignore_children for permission update functions
  block/backup-top: drop .active
  block: introduce bdrv_drop_filter()
  block: add bdrv_remove_filter_or_cow transaction action
  block: adapt bdrv_append() for inserting filters
  block: split out bdrv_replace_node_noperm()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Signed-off-by: John Snow <jsnow@redhat.com>

Message-Id: <20210421192233.3542904-9-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

No functional change.

Note: QAPISourceError's info parameter is Optional[] because schema.py
treats the info property of its various classes as Optional to
accommodate built-in types, which have no source. See prior commit
'qapi/error: assert QAPISourceInfo is not None'.

Signed-off-by: John Snow <jsnow@redhat.com>

Message-Id: <20210421192233.3542904-8-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Keeping it in error.py will create some cyclic import problems when we
add types to the QAPISchemaParser. Callers don't need to know the
details of QAPIParseError unless they are parsing or dealing directly
with the parser, so this won't create any harsh new requirements for
callers in the general case.

Update error.py with a little docstring that gives a nod to where the
error may now be found.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Built-in stuff is not parsed from a source file, and therefore have no
QAPISourceInfo. If such None info was used for reporting an error,
built-in stuff would be broken. Programming error. Instead of reporting
a confusing error with bogus source location then, we better crash.

We currently crash only if self.col was set. Assert that self.info is
not None in order to crash reliably.

We can not yet change the type of the initializer to prove this cannot
happen at static analysis time before the remainder of the code is fully
typed.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

It's already treated as optional, with one direct caller and some
subclass callers passing 'None'. Make it officially optional, which
requires moving the position of the argument to come after all required
parameters.

QAPISemError becomes functionally identical to QAPISourceError. Keep the
name to preserve its semantic meaning and avoid code churn, but remove
the now-useless __init__ wrapper.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-4-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Missed in commit 2cae67bc "qapi: Use super() now we have Python 3".

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210421192233.3542904-3-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Rename QAPIError to QAPISourceError, and then create a new QAPIError
class that serves as the basis for all of our other custom exceptions,
without specifying any class properties.

This leaves QAPIError as a package-wide error class that's suitable for
any current or future errors.

(Right now, we don't have any errors that DON'T also want to specify a
Source location, but this MAY change. In these cases, a common abstract
ancestor would be desired.)

Add docstrings to explain the intended function of each error class.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-2-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-18-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

It is -- maybe -- possibly -- three nanoseconds faster.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-17-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Now with more :words:!

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-16-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Per list review: qapi-code-gen.txt reserves suffixes Kind and
List only for type names, but the code rejects them for events and
commands, too.

It turns out we reject them earlier anyway: In check_name_upper() for
event names, and in check_name_lower() for command names.

Still, adjust the code for clarity over what precisely we are guarding
against.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-15-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-14-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-13-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

This is a small rewrite to address some minor style nits.

Don't compare against the empty list to check for the empty condition, and
move the normalization forward to unify the check on the now-normalized
structure.

With the check unified, the local nested function isn't needed anymore
and can be brought down into the normal flow of the function. With the
nesting level changed, shuffle the error strings around a bit to get
them to fit in 79 columns.

Note: although ifcond is typed as Sequence[str] elsewhere, we *know* that
the parser will produce real, bona-fide lists. It's okay to check
isinstance(ifcond, list) here.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-12-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Annotations do not change runtime behavior.
This commit *only* adds annotations.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

This is a minor adjustment that lets parameters @required and
@optional take tuple arguments, in particular ().  Later patches will
make use of that.

(Iterable would also have worked, but Iterable also includes things like
generator expressions which are consumed upon iteration, which would
require a rewrite to make sure that each input was only traversed
once. Collection implies the "can re-iterate" property.)

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-10-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Casts are instructions to the type checker only, they aren't "safe" and
should probably be avoided in general. In this case, when we perform
type checking on a nested structure, the type of each field does not
"stick".

(See PEP 647 for an example of "type narrowing" that does "stick".
 It is available in Python 3.10, so we can't use it yet.)

We don't need to assert that something is a str if we've already checked
or asserted that it is -- use a cast instead for these cases.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-9-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Prior to this commit, specifying a non-object value here causes the QAPI
parser to crash in expr.py with a stack trace with (likely) an
AttributeError when we attempt to call that value's items() method.

This member needs to be an object (Dict), and not anything else. Add a
check for this with a nicer error message, and formalize that check with
new test cases that exercise that error.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-8-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

For readability purposes only, shimmy the early return upwards to the
top of the function, so cases proceed in order from least to most
complex.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

mypy isn't fond of allowing you to check for bool membership in a
collection of str elements. Guard this lookup for precisely when we were
given a name.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

mypy does not know the types of values stored in Dicts that masquerade
as objects. Help the type checker out by constraining the type.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

OrderedDict is a subtype of dict, so we can check for a more general
form. These functions do not themselves depend on it being any
particular type.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-4-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>