Move it to qom/cpu.h to avoid issues with include order.

Change pc_acpi_smi_interrupt() opaque to X86CPU.

Signed-off-by: Andreas Färber <afaerber@suse.de>

Move it to qom/cpu.c to avoid build failures depending on include order
of cpu-qom.h and exec/cpu-all.h.

Change opaques of various ..._irq_handler() functions to the
appropriate CPU type to facilitate using cpu_reset_interrupt().

Fix Coding Style issues while at it (missing braces, indentation).

Signed-off-by: Andreas Färber <afaerber@suse.de>

Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.

Pass PowerPCCPU to kvmppc_handle_halt().

Signed-off-by: Andreas Färber <afaerber@suse.de>

Reindent, add missing braces and drop/adjust whitespace.

Prepares for CPUArchState-to-CPUState field movements in
cpu_cris_handle_mmu_fault(), do_interruptv10() and do_interrupt().
The remaining functions were so minor that they can be fixed in one go.

Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>

Expose vmstate_cpu as vmstate_x86_cpu and hook it up to CPUClass::vmsd.
Adapt opaques and VMState fields to X86CPU. Drop cpu_{save,load}().

Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>

This setter avoids redefining each VMStateDescription value to
vmstate_dummy by not referencing the value for CONFIG_USER_ONLY.

Suggested-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>

In comparison to DeviceClass::vmsd, CPU VMState is split in two,
"cpu_common" and "cpu", and uses cpu_index as instance_id instead of -1.
Therefore add a CPU-specific CPUClass::vmsd field.

Unlike the legacy CPUArchState registration, rather register CPUState.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>

Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>

This avoids adding a duplicate stub for CONFIG_USER_ONLY.

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>

They are never changed once initialized, and moving them to the class
will allow to inspect them before instantiating.

Signed-off-by: Andreas Färber <afaerber@suse.de>

Store legacy name in SuperHCPUClass for -cpu ? and for case-insensitive
class lookup.

List CPUs by iterating over TYPE_SUPERH_CPU subclasses.

Signed-off-by: Andreas Färber <afaerber@suse.de>

No functional change, just less usages of first_cpu and next_cpu fields.

env is passed to cpu_memory_rw_debug(), which in turn passes it to
target-specific cpu_get_phys_page_debug(). Changing both would be a
larger refactoring, so defer that by using env_ptr for now.

Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>

No functional change, just a reduction of CPU loops.

The mon_cpu field is left untouched for now since changing that requires
a number of larger prerequisites, including cpu_synchronize_state() and
mon_get_cpu().

Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>

Commit 55e5c285 breaks CPU not found return value, and returns
CPU corresponding to the last non NULL env.
Fix it by returning CPU only if env is not NULL, otherwise CPU is
not found and function should return NULL.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>

# By Paolo Bonzini (40) and others
# Via Juan Quintela
* quintela/migration.next: (46 commits)
  page_cache: dup memory on insert
  page_cache: fix memory leak
  Fix cache_resize to keep old entry age
  Fix page_cache leak in cache_resize
  migration: inline migrate_fd_close
  migration: eliminate s->migration_file
  migration: move contents of migration_close to migrate_fd_cleanup
  migration: move rate limiting to QEMUFile
  migration: small changes around rate-limiting
  migration: use qemu_ftell to compute bandwidth
  migration: use QEMUFile for writing outgoing migration data
  migration: use QEMUFile for migration channel lifetime
  qemu-file: simplify and export qemu_ftell
  qemu-file: add writable socket QEMUFile
  qemu-file: check exit status when closing a pipe QEMUFile
  qemu-file: fsync a writable stdio QEMUFile
  migration: merge qemu_popen_cmd with qemu_popen
  migration: use qemu_file_rate_limit consistently
  migration: remove useless qemu_file_get_error check
  migration: detect error before sleeping
  ...

A conflict was resolved the wrong way when merging commit 320ba5fe (build:
always link device_tree.o into emulators if libfdt available, 2013-02-05).
This causes a build failure for the arm-softmmu target due to multiply
defined symbol.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1362997886-9470-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

The page cache frees all data on finish, on resize and
if there is collision on insert. So it should be the caches
responsibility to dup the data that is stored in the cache.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>

XBZRLE encoded migration introduced a MRU page cache
meachnism. Unfortunately, cached items where never freed in
case of a collision in the page cache on cache_insert().

This lead to out of memory conditions during XBZRLE migration
if the page cache was small and there where a lot of collisions
in the cache.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Instead of using cache_insert do the update itself

Signed-off-by: Orit Wasserman <owasserm@redhat.com>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Signed-off-by: Orit Wasserman <owasserm@redhat.com>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

The indirection is useless now.  Backends can open s->file directly.

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

With this patch, the migration_file is not needed anymore.

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Rate limiting is now simply a byte counter; client call
qemu_file_rate_limit() manually to determine if they have to exit.
So it is possible and simple to move the functionality to QEMUFile.

This makes the remaining functionality of s->file redundant;
in the next patch we can remove it and write directly to s->migration_file.

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

This patch extracts a few small changes from the next patch, which
are unrelated to adding generic rate-limiting functionality to
QEMUFile.  Make migration_set_rate_limit a simple accessor, and
use qemu_file_set_rate_limit consistently.  Also fix a typo where
INT_MAX should have been SIZE_MAX.

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Prepare for when s->bytes_xfer will be removed.

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Second, drop the file descriptor indirection, and write directly to the
QEMUFile.

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

As a start, use QEMUFile to store the destination and close it.
qemu_get_fd gets a file descriptor that will be used by the write
callbacks.

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Force a flush when qemu_ftell is called.  This simplifies the buffer magic
(it also breaks qemu_ftell for input QEMUFiles, but we never use it).

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

This is what exec_close does.  Move this to the underlying QEMUFile.

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

This is what fd_close does.  Prepare for switching to a QEMUFile.

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

There is no reason for outgoing exec migration to do popen manually
anymore (the reason used to be that we needed the FILE* to make it
non-blocking).  Use qemu_popen_cmd.

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration_put_buffer is never called if there has been an error.

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

We will go around the loop exactly once after setting last_round.
Eliminate the variable altogether.

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

This is consistent once that we have moved everything to migration.c

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Buffering was needed because blocking writes could take a long time
and starve other threads seeking to grab the big QEMU mutex.

Now that all writes (except within _complete callbacks) are done
outside the big QEMU mutex, we do not need buffering at all.

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>