Make sure all fifo ptrs are within range.

Fixes: CVE-2016-4454
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-3-git-send-email-kraxel@redhat.com

Sanity checks are applied when the fifo is enabled by the guest
(SVGA_REG_CONFIG_DONE write).  Which doesn't help much if the guest
changes the fifo registers afterwards.  Move the checks to
vmsvga_fifo_length so they are done each time qemu is about to read
from the fifo.

Fixes: CVE-2016-4454
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-2-git-send-email-kraxel@redhat.com

Commit "ca58b45f ui/virtio-gpu: add and use qemu_create_displaysurface_pixman"
breaks scanouts which use a region of the underlying resource only.

So, we need another way to handle the underlying issue.  Lets create a
new pixman image, grab a reference on the pixman providing the
underlying storage, hook up a destroy callback which releases the
reference.  That way regions work again and releasing the backing
storage should still be impossible thanks to the extra reference we are
holding.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1464597655-26341-1-git-send-email-kraxel@redhat.com

# gpg: Signature made Thu 02 Jun 2016 07:23:18 BST using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request: (31 commits)
  Add ENET device to i.MX6 SOC.
  Add ENET/Gbps Ethernet support to FEC device
  i.MX: move FEC device to a register array structure.
  i.MX: Rename i.MX FEC defines to ENET_XXX
  i.MX: reset TX/RX descriptors when FEC is disabled.
  i.MX: Fix FEC code for ECR register reset value.
  i.MX: Fix FEC code for MDIO address selection
  i.MX: Fix FEC code for MDIO operation selection
  net: handle optional VLAN header in checksum computation.
  net: improve UDP/TCP checksum computation.
  e1000e: Introduce qtest for e1000e device
  net: Introduce e1000e device emulation
  e1000: Move out code that will be reused in e1000e
  e1000_regs: Add definitions for Intel 82574-specific bits
  vmxnet3: Use pci_dma_* API instead of cpu_physical_memory_*
  net_pkt: Extend packet abstraction as required by e1000e functionality
  rtl8139: Move more TCP definitions to common header
  net_pkt: Name vmxnet3 packet abstractions more generic
  vmxnet3: Use common MAC address tracing macros
  net: Add macros for MAC address tracing
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

v2: Fix warning due to include.
    Various temp dir/file changes.
    Don't use "find -executable" to be compatible with Mac.

# gpg: Signature made Wed 01 Jun 2016 10:30:33 BST using RSA key ID 6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021  AD56 CA35 624C 6A91 71C6

* remotes/famz/tags/pull-docker-20160601:
  .gitignore: Ignore docker source copy
  MAINTAINERS: Add tests/docker
  docker: Add EXTRA_CONFIGURE_OPTS
  docs: Add text for tests/docker in build-system.txt
  docker: Add travis tool
  docker: Add mingw test
  docker: Add clang test
  docker: Add full test
  docker: Add quick test
  docker: Add common.rc
  docker: Add test runner
  docker: Add images
  Makefile: Rules for docker testing
  Makefile: Always include rules.mak
  rules.mak: Add "COMMA" constant
  tests: Add utilities for docker testing

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

This adds the ENET device to the i.MX6 SOC.

This was tested by booting Linux on an Qemu i.MX6 instance and accessing
the internet from the linux guest.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

The ENET device (present in i.MX6) is "derived" from FEC and backward
compatible with it.

This patch adds the necessary support of the added feature in the ENET
device to allow Linux to use it (on supported processors).

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

This is to prepare for the ENET Gb device of the i.MX6.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

According to the FEC chapter of i.MX25 reference manual

RX adn TX descriptors are reseted when the FEC device is disabled through ECR.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

According to the FEC chapter of i.MX25 reference manual ECR register is
initialized at 0xf0000000 at reset time.

We fix the value.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

According to the FEC chapter of i.MX25 reference manual

When writing to MMFR register, the MDIO device and adress are selected by
bit 27 to 23 and bit 22 to 18 respectively. This is a total of 10 bits
that need to be used by the Phy chip/address decoding function.

This patch fixes the number of bits used from 9 to 10.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

According to the FEC chapter of i.MX25 reference manual

When writing the MMFR register, bit 29 and 28 select the requested operation.
 * 10 means read operation with valid MII mgmt frame
 * 11 means read operation with non compliant MII mgmt frame
 * 01 means write operation with valid MII mgmt frame
 * 00 means write operation with non compliant MII mgmt frame

So while bit 28 does change beween read/write for valid MII mgmt frame, the
mening is inverted for non compliant MII mgmt frame.

Bit 29 on the other hand means read/write whatever the type of mgmt frame
involved.

So this patch change the operation selection from bit 28 to bit 29 as it is
more generic.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

 * based on Eth, UDP, TCP struct present in eth.h instead of hardcoded
   indexes and sizes.
 * based on various macros present in eth.h.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

This patch introduces emulation for the Intel 82574 adapter, AKA e1000e.

This implementation is derived from the e1000 emulation code, and
utilizes the TX/RX packet abstractions that were initially developed for
the vmxnet3 device. Although some parts of the introduced code may be
shared with e1000, the differences are substantial enough so that the
only shared resources for the two devices are the definitions in
hw/net/e1000_regs.h.

Similarly to vmxnet3, the new device uses virtio headers for task
offloads (for backends that support virtio extensions). Usage of
virtio headers may be forcibly disabled via a boolean device property
"vnet" (which is enabled by default). In such case task offloads
will be performed in software, in the same way it is done on
backends that do not support virtio headers.

The device code is split into two parts:

  1. hw/net/e1000e.c: QEMU-specific code for a network device;
  2. hw/net/e1000e_core.[hc]: Device emulation according to the spec.

The new device name is e1000e.

Intel specifications for the 82574 controller are available at:
http://www.intel.com/content/dam/doc/datasheet/82574l-gbe-controller-datasheet.pdf



Throughput measurement results (iperf2):

                Fedora 22 guest, TCP, RX
    4 ++------------------------------------------+
      |                                           |
      |                           X   X   X   X   X
  3.5 ++          X   X   X   X                   |
      |       X                                   |
      |                                           |
    3 ++                                          |
G     |   X                                       |
b     |                                           |
/ 2.5 ++                                          |
s     |                                           |
      |                                           |
    2 ++                                          |
      |                                           |
      |                                           |
  1.5 X+                                          |
      |                                           |
      +   +   +   +   +   +   +   +   +   +   +   +
    1 ++--+---+---+---+---+---+---+---+---+---+---+
     32  64  128 256 512  1   2   4   8  16  32  64
      B   B   B   B   B   KB  KB  KB  KB KB  KB  KB
                       Buffer size

               Fedora 22 guest, TCP, TX
  18 ++-------------------------------------------+
     |                        X                   |
  16 ++                           X   X   X   X   X
     |                   X                        |
  14 ++                                           |
     |                                            |
  12 ++                                           |
G    |               X                            |
b 10 ++                                           |
/    |                                            |
s  8 ++                                           |
     |                                            |
   6 ++          X                                |
     |                                            |
   4 ++                                           |
     |       X                                    |
   2 ++  X                                        |
     X   +   +   +   +   +    +   +   +   +   +   +
   0 ++--+---+---+---+---+----+---+---+---+---+---+
    32  64  128 256 512  1    2   4   8  16  32  64
     B   B   B   B   B   KB   KB  KB  KB KB  KB  KB
                       Buffer size

                Fedora 22 guest, UDP, RX
    3 ++------------------------------------------+
      |                                           X
      |                                           |
  2.5 ++                                          |
      |                                           |
      |                                           |
    2 ++                                 X        |
G     |                                           |
b     |                                           |
/ 1.5 ++                                          |
s     |                         X                 |
      |                                           |
    1 ++                                          |
      |                                           |
      |                 X                         |
  0.5 ++                                          |
      |        X                                  |
      X        +        +       +        +        +
    0 ++-------+--------+-------+--------+--------+
     32       64       128     256      512       1
      B        B         B       B        B      KB
                       Datagram size

                Fedora 22 guest, UDP, TX
    1 ++------------------------------------------+
      |                                           X
  0.9 ++                                          |
      |                                           |
  0.8 ++                                          |
  0.7 ++                                          |
      |                                           |
G 0.6 ++                                          |
b     |                                           |
/ 0.5 ++                                          |
s     |                                  X        |
  0.4 ++                                          |
      |                                           |
  0.3 ++                                          |
  0.2 ++                        X                 |
      |                                           |
  0.1 ++                X                         |
      X        X        +       +        +        +
    0 ++-------+--------+-------+--------+--------+
     32       64       128     256      512       1
      B        B         B       B        B      KB
                       Datagram size

              Windows 2012R2 guest, TCP, RX
  3.2 ++------------------------------------------+
      |                                   X       |
    3 ++                                          |
      |                                           |
  2.8 ++                                          |
      |                                           |
  2.6 ++                              X           |
G     |   X                   X   X           X   X
b 2.4 ++      X       X                           |
/     |                                           |
s 2.2 ++                                          |
      |                                           |
    2 ++                                          |
      |           X       X                       |
  1.8 ++                                          |
      |                                           |
  1.6 X+                                          |
      +   +   +   +   +   +   +   +   +   +   +   +
  1.4 ++--+---+---+---+---+---+---+---+---+---+---+
     32  64  128 256 512  1   2   4   8  16  32  64
      B   B   B   B   B   KB  KB  KB  KB KB  KB  KB
                       Buffer size

             Windows 2012R2 guest, TCP, TX
  14 ++-------------------------------------------+
     |                                            |
     |                                        X   X
  12 ++                                           |
     |                                            |
  10 ++                                           |
     |                                            |
G    |                                            |
b  8 ++                                           |
/    |                                    X       |
s  6 ++                                           |
     |                                            |
     |                                            |
   4 ++                               X           |
     |                                            |
   2 ++                                           |
     |           X   X            X               |
     +   X   X   +   +   X    X   +   +   +   +   +
   0 X+--+---+---+---+---+----+---+---+---+---+---+
    32  64  128 256 512  1    2   4   8  16  32  64
     B   B   B   B   B   KB   KB  KB  KB KB  KB  KB
                       Buffer size

              Windows 2012R2 guest, UDP, RX
  1.6 ++------------------------------------------X
      |                                           |
  1.4 ++                                          |
      |                                           |
  1.2 ++                                          |
      |                                  X        |
      |                                           |
G   1 ++                                          |
b     |                                           |
/ 0.8 ++                                          |
s     |                                           |
  0.6 ++                        X                 |
      |                                           |
  0.4 ++                                          |
      |                 X                         |
      |                                           |
  0.2 ++       X                                  |
      X        +        +       +        +        +
    0 ++-------+--------+-------+--------+--------+
     32       64       128     256      512       1
      B        B         B       B        B      KB
                       Datagram size

              Windows 2012R2 guest, UDP, TX
  0.6 ++------------------------------------------+
      |                                           X
      |                                           |
  0.5 ++                                          |
      |                                           |
      |                                           |
  0.4 ++                                          |
G     |                                           |
b     |                                           |
/ 0.3 ++                                 X        |
s     |                                           |
      |                                           |
  0.2 ++                                          |
      |                                           |
      |                         X                 |
  0.1 ++                                          |
      |                 X                         |
      X        X        +       +        +        +
    0 ++-------+--------+-------+--------+--------+
     32       64       128     256      512       1
      B        B         B       B        B      KB
                       Datagram size

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Code that will be shared moved to a separate files.

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

To make this device and network packets
abstractions ready for IOMMU.

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

This patch extends the TX/RX packet abstractions with features that will
be used by the e1000e device implementation.

Changes are:

  1. Support iovec lists for RX buffers
  2. Deeper RX packets parsing
  3. Loopback option for TX packets
  4. Extended VLAN headers handling
  5. RSS processing for RX packets

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

This patch drops "vmx" prefix from packet abstractions names
to emphasize the fact they are generic and not tied to any
specific network device.

These abstractions will be reused by e1000e emulation implementation
introduced by following patches so their names need generalization.

This patch (except renamed files, adjusted comments and changes in MAINTAINTERS)
was produced by:

git grep -lz 'vmxnet_tx_pkt' | xargs -0 perl -i'' -pE "s/vmxnet_tx_pkt/net_tx_pkt/g"
git grep -lz 'vmxnet_rx_pkt' | xargs -0 perl -i'' -pE "s/vmxnet_rx_pkt/net_rx_pkt/g"
git grep -lz 'VmxnetTxPkt' | xargs -0 perl -i'' -pE "s/VmxnetTxPkt/NetTxPkt/g"
git grep -lz 'VMXNET_TX_PKT' | xargs -0 perl -i'' -pE "s/VMXNET_TX_PKT/NET_TX_PKT/g"
git grep -lz 'VmxnetRxPkt' | xargs -0 perl -i'' -pE "s/VmxnetRxPkt/NetRxPkt/g"
git grep -lz 'VMXNET_RX_PKT' | xargs -0 perl -i'' -pE "s/VMXNET_RX_PKT/NET_RX_PKT/g"
sed -ie 's/VMXNET_/NET_/g' hw/net/vmxnet_rx_pkt.c
sed -ie 's/VMXNET_/NET_/g' hw/net/vmxnet_tx_pkt.c

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

These macros will be used by future commits introducing
e1000e device emulation and by vmxnet3 tracing code.

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Added support for PCIe CAP v1, while reusing some of the existing v2
infrastructure.

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

This function will be used by e1000e device code.

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Replace legacy cpu_to_le64w()/le64_to_cpup()
calls with stq_le_p()/ldq_le_p().

Motivation for this modification is that
follow up patches add utility function
pcie_dev_ser_num_init() for PCIe DSN
capability creation which uses
pci_set_quad() with a misaligned offset.

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Signed-off-by: Fam Zheng <famz@redhat.com>

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-16-git-send-email-famz@redhat.com

Whatever passed in this variable will be appended to all
configure commands.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1464755128-32490-15-git-send-email-famz@redhat.com

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-14-git-send-email-famz@redhat.com

The script is not prefixed with test- so it won't run with "make docker-test",
because it can take too long.

Run it with "make docker-travis@ubuntu".

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-13-git-send-email-famz@redhat.com

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-12-git-send-email-famz@redhat.com

The (currently partially commented out) configure options are suggested
by John Snow <jsnow@redhat.com>.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1464755128-32490-11-git-send-email-famz@redhat.com

This builds all available targets.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1464755128-32490-10-git-send-email-famz@redhat.com