iscsi_aio_cancel() does not increment the request's reference count,
causing a use-after-free when ABORT TASK finishes after the request has
already completed.

There are some additional issues with iscsi_aio_cancel():
1. Several ABORT TASKs may be sent for the same task if
   iscsi_aio_cancel() is invoked multiple times.  It's better to avoid
   this just in case the command identifier is reused.
2. The iscsilun->mutex protection is missing in iscsi_aio_cancel().

Reported-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180203061621.7033-4-stefanha@redhat.com>
Reviewed-by: Felipe Franciosi <felipe@nutanix.com>
Tested-by: Sreejith Mohanan <sreejit.mohanan@nutanix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Commit d045c466 ("iscsi: do not use
aio_context_acquire/release") introduced iscsilun->mutex but appears to
have overlooked iscsi_timed_check_events() when introducing the mutex.

iscsi_service() and iscsi_set_events() must be called with
iscsilun->mutex held.

iscsi_timed_check_events() is invoked from the AioContext and does not
take the mutex.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180203061621.7033-3-stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The IscsiAIOCB->buf field has not been used since commit
e49ab19f ("block/iscsi: bump libiscsi
requirement to 1.9.0").  It used to be a linear buffer for old libiscsi
versions that didn't support scatter-gather.  The minimum libiscsi
version supports scatter-gather so we don't linearize buffers anymore.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180203061621.7033-2-stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Intel HAXM supports now 32-bit and 64-bit Linux hosts. This patch includes
the corresponding userland changes.

Since the Darwin userland backend is POSIX-compliant, the hax-darwin.{c,h}
files have been renamed to hax-posix.{c,h}. This prefix is consistent with
the naming used in the rest of QEMU.

Signed-off-by: Alexandro Sanchez Bach <asanchez@kryptoslogic.com>
Message-Id: <20181115013331.65820-1-asanchez@kryptoslogic.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The e1000 driver calls memory_region_add_coalescing but
kvm_coalesce_mmio_region is never called for those regions.  The bug
dates back to the introduction of the memory region API; to fix it,
delete and re-add coalesced MMIO ranges when building the FlatViews.

Because coalesced MMIO regions apply to all address spaces, the
has_coalesced_range flag has to be changed into an int.

Fixes: 093bc2cd ("Hierarchical memory region API")
Reported-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Store whether the FlatRange has had any coalesced I/O ranges applied,
and if not avoid calling coalesced_io_del.  This is useful in preparation
for the next patch, which will call coalesced_io_del when rendering
memory regions.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Extract two new functions from memory_region_update_coalesced_range_as.
To avoid duplication in the creation of the MemoryRegionSection, use
MEMORY_LISTENER_UPDATE_REGION instead of MEMORY_LISTENER_CALL
to invoke the listener callback.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This avoids a few re-rendering of the memory AddressSpace.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add optional colors to make seeing message types a bit easier.
The default is to show them on a tty.

Inspired by Linux commits 57230297116fa ("checkpatch: colorize output
to terminal") and 737c0767758b ("checkpatch: change format of --color
argument to --color[=WHEN]").

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Similar to how patchew output looks like for multiple patches,
say what file or patch is being tested _before_ emitting errors.
This is clearer to a human that scans the output from top to
bottom.

In addition, provide a truncated commit hash and subject instead of
the full hash, and process the commits first-to-last rather than
last-to-first.

Inspired by Linux commit 0dea9f1eef86bedacad91b6f652ca1ab0d08854c
("checkpatch: reduce number of `git log` calls with --git", 2016-03-20).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull the test before the anticipated exits from the process sub.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In some cases, checkpatch's process subroutine is exiting the
whole process.  This is wrong, just return from the subroutine
instead.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When compiling with "--disable-tcg", we currently still use "tcg"
as default accelerator. "kvm" should be used in this case instead.
Also, some downstream distros provide QEMU binaries which have "kvm"
in their names (e.g. "qemu-kvm" on RHEL or "kvm" on Ubuntu) that use
KVM by default - and some users might want to do something similar
with upstream binaries, too. Accomodate them by using "kvm:tcg" as
default when we detect such a binary name.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1538748792-19444-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Minor linux-user update (2019-01-10)
Fixes LTP tests pwrite03 and pwrite03_64

# gpg: Signature made Thu 10 Jan 2019 08:37:04 GMT
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-4.0-pull-request:
  linux-user: make pwrite64/pread64(fd, NULL, 0, offset) return 0
  Add getsockopt for settable SOL_IPV6 options

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ui: bugfixes, drop keymap include support, drop dead code.

# gpg: Signature made Thu 10 Jan 2019 08:47:10 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20190110-pull-request:
  spice: Remove unused include
  keymaps: drop support for include files
  keymaps: remove common include
  keymaps: drop nl-be map
  keymaps: remove modifiers include
  ui/console: Remove qemu_create_display_surface_guestmem()
  configure: bump spice-server required version to 0.12.5
  egl-headless: add egl_create_context

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Trivial patches for 4.0 (2019-01-09)

# gpg: Signature made Wed 09 Jan 2019 13:06:58 GMT
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-patches-pull-request:
  ioapic: use TYPE_FOO MACRO than constant string
  trivial: Don't include isa.h if it is not really necessary
  hw/audio/marvell: Don't include unnecessary i2c.h header file
  qom: Include qemu/fprintf-fn.h in cpu.h
  hw/core: fix whitespace in a sentence
  typedefs: (Re-)sort entries alphabetically

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Block/testing patches

v2: Fix URL.
    Drop BSD patch.

# gpg: Signature made Wed 09 Jan 2019 01:51:47 GMT
# gpg:                using RSA key CA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021  AD56 CA35 624C 6A91 71C6

* remotes/famz/tags/staging-pull-request:
  docker: Use a stable snapshot for Debian Sid
  block/nvme: optimize the performance of nvme driver based on vfio-pci

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Linux returns success if pwrite64() or pread64() are called with a
zero length NULL buffer, but QEMU was returning -TARGET_EFAULT.

This is the same bug that we fixed in commit 58cfa6c2
for the write syscall, and long before that in 38d840e6
for the read syscall.

Fixes: https://bugs.launchpad.net/qemu/+bug/1810433



Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190108184900.9654-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Signed-off-by: Tom Deseyn <tom.deseyn@gmail.com>
Message-Id: <20181213130611.7496-1-tom.deseyn@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

The definitions in the header are not  used.
Also this fixes porting SPICE to Windows where the header is not
available.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190107184404.31993-1-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-id: 20181116104319.10329-5-kraxel@redhat.com

Copy the content into the sl and sv files (the only ones left which are
not generated by qemu-keymap).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-4-kraxel@redhat.com

It doesn't define any keys, only includes "common".
Which makes it effectively an "en-us" map.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-3-kraxel@redhat.com

"common" is the only file using it, so we can just include it directly.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-2-kraxel@redhat.com

The qemu_create_display_surface_guestmem() function was added in
commit a77549b3 but apparently never used. Remove it.

(The API of this function is in any case awkward as a generic
function: it assumes that a physical address uniquely identifies
a piece of memory in the system, which is mostly but not
always true.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181122170309.4856-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Looking at chardev/spice.c code, I realize compilation was broken for
a while with spice-server < 0.12.3. Let's bump required version
to 0.12.5, released May 19 2014, instead of adding more #ifdef.

(this patch combines changes from an early version and some of
Frediano "[PATCH 2/2] spice: Bump required spice-server version to
0.12.6")

According to repology, all the distros that are build target platforms
for QEMU include it:

      RHEL-7: 0.14.0
      Debian (Stretch): 0.12.8
      Debian (Jessie): 0.12.5
      FreeBSD (ports): 0.14.0
      OpenSUSE Leap 15: 0.14.0
      Ubuntu (Xenial): 0.12.6

Note that a previous version of this patch was bumping version to
0.12.6. Unfortunately, Debian Jessie (oldstable) is stuck with spice
server 0.12.5, and QEMU should keep building until after 2y of current
stable (Stretch), which will be around June 17th 2019. Qemu 4.1
should thus be free of bumping to spice-server 0.12.6 during 4.1
development cycle.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20181128155932.16171-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

We must set the correct context (via eglMakeCurrent) before
calling qemu_egl_create_context, so we need a thin wrapper and can't
hook qemu_egl_create_context directly as ->dpy_gl_ctx_create callback.

Reported-by: Frederik Carlier <frederik.carlier@quamotion.mobi>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181129123502.30129-1-kraxel@redhat.com

ppc patch queue 2019-01-09

Second main pull request for qemu-4.0.  Highlights are:
 * Final parts of XIVE support for pseries (without KVM)
 * Preliminary work for PHB hotplug
 * Starting to use TCG vector operations

This includes some changes in the PCI core, which Michael Tsirkin
requested come through this tree, since they're primarily of interest
for ppc.

# gpg: Signature made Tue 08 Jan 2019 22:44:10 GMT
# gpg:                using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-4.0-20190109: (29 commits)
  spapr: enable XIVE MMIOs at reset
  spapr: introduce a new sPAPR IRQ backend supporting XIVE and XICS
  ppc/xics: allow ICSState to have an offset 0
  spapr: move the qemu_irq array under the machine
  pnv/psi: move the ICSState qemu_irq array under the PSI device model
  ppc: export the XICS and XIVE set_irq handlers
  spapr: return from post_load method when RTC import fails
  ppc: replace the 'Object *intc' by a 'ICPState *icp' pointer under the CPU
  ppc/xive: introduce a XiveTCTX pointer under PowerPCCPU
  spapr: modify the prototype of the cpu_intc_create() method
  spapr/xive: simplify the sPAPR IRQ qirq method for XIVE
  spapr_pci: Define SPAPR_MAX_PHBS in hw/pci-host/spapr.h
  pci: allow cleanup/unregistration of PCI root buses
  spapr: move spapr_create_phb() to core machine code
  MAINTAINERS: add qemu_vga.ndrv file entry for Mac machines
  MAINTAINERS: Add some missing ppc-related files
  target/ppc: replace AVR* macros with Vsr* macros
  target/ppc: move FP and VMX registers into aligned vsr register array
  target/ppc: merge ppc_vsr_t and ppc_avr_t union types
  target/ppc: switch FPR, VMX and VSX helpers to access data directly from cpu_env
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Make them more QOMConventional.
Cc:qemu-trivial@nongnu.org

Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190105023831.66910-1-liq3ea@163.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

These files don't seem to do anything related to ISA directly, so
there is no need to include isa.h here.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1546615943-16274-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

This device does not use I2C, so no need to include the header file here.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1546614146-10525-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

QOM cpu.h uses fprintf_function which requires Qemu's
qemu/fprintf-fn.h header. Include it.

Signed-off-by: Priit Laes <plaes@plaes.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181226003722.31257-1-plaes@plaes.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181224154922.3338-1-wainersm@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Since the last time we sorted things (2988cbea), we've had a
few relapses that were inserted out of order.  Also, we had more
entries that were sorted case-insensitively than not, so let's
document that convention and stick to it.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181115211752.1295571-2-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

The Debian Sid repository is not garanteed to be stable, as his
'unstable' name suggest :)

To allow quick testing, Debian maintainers might push packages
various time a day. Sometime package dependencies might break,
which is annoying when using this repository for stable development
(which is not recommended, but Sid provides edge packages we use
for testing).

Debian provides repositories snapshots which are suitable for our
use. Pick a recent date that works. When required, update to newer
releases will be easy.

This fixes current issues with this image:

  $ make docker-image-debian-sid
  [...]
  The following packages have unmet dependencies:
   build-essential : Depends: dpkg-dev (>= 1.17.11) but it is not going to be installed
   git : Depends: perl but it is not going to be installed
         Depends: liberror-perl but it is not going to be installed
   pkg-config : Depends: libdpkg-perl but it is not going to be installed
   texinfo : Depends: perl (>= 5.26.2-6) but it is not going to be installed
             Depends: libtext-unidecode-perl but it is not going to be installed
             Depends: libxml-libxml-perl but it is not going to be installed
  E: Unable to correct problems, you have held broken packages.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181101183705.5422-1-philmd@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>

When the IO size is larger than 2 pages, we move the the pointer one by
one in the pagelist, this is inefficient.

This is a simple benchmark result:

Before:
$ qemu-io -c 'write 0 1G' nvme://0000:00:04.0/1

wrote 1073741824/1073741824 bytes at offset 0
1 GiB, 1 ops; 0:00:02.41 (424.504 MiB/sec and 0.4146 ops/sec)

 $ qemu-io -c 'read 0 1G' nvme://0000:00:04.0/1

read 1073741824/1073741824 bytes at offset 0
1 GiB, 1 ops; 0:00:02.03 (503.055 MiB/sec and 0.4913 ops/sec)

After:
$ qemu-io -c 'write 0 1G' nvme://0000:00:04.0/1

wrote 1073741824/1073741824 bytes at offset 0
1 GiB, 1 ops; 0:00:02.17 (471.517 MiB/sec and 0.4605 ops/sec)

 $ qemu-io -c 'read 0 1G' nvme://0000:00:04.0/1

read 1073741824/1073741824 bytes at offset 0
1 GiB, 1 ops; 0:00:01.94 (526.770 MiB/sec and 0.5144 ops/sec)

Signed-off-by: Li Feng <lifeng1519@gmail.com>
Message-Id: <20181101103807.25862-1-lifeng1519@gmail.com>
Signed-off-by: Fam Zheng <famz@redhat.com>

Depending on the interrupt mode of the machine, enable or disable the
XIVE MMIOs.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

The 'dual' sPAPR IRQ backend supports both interrupt mode, XIVE
exploitation mode and the legacy compatibility mode (XICS). both modes
are not supported at the same time.

The machine starts with the legacy mode and a new interrupt mode can
then be negotiated by the CAS process. In this case, the new mode is
activated after a reset to take into account the required changes in
the machine. These impact the device tree layout, the interrupt
presenter object and the exposed MMIO regions in the case of XIVE.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

commit 15ed653f ("ppc/xics: An ICS with offset 0 is assumed to be
uninitialized") introduced an extra check on the ICS offset which is
not strictly necessary.

Revert the change to be able to map the XICS IRQ number space on the
XIVE IRQ number space.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

The qemu_irq array is now allocated at the machine level using a sPAPR
IRQ set_irq handler depending on the chosen interrupt mode. The use of
this handler is slightly inefficient today but it will become necessary
when the 'dual' interrupt mode is introduced.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>