- Sep 18, 2023
-
-
Peter Maydell authored
Use a heap allocation instead of a variable length array in tap_receive_iov(). The codebase has very few VLAs, and if we can get rid of them all we can make the compiler error on new additions. This is a defensive measure against security bugs where an on-stack dynamic allocation isn't correctly size-checked (e.g. CVE-2021-3527). Signed-off-by:
Peter Maydell <peter.maydell@linaro.org> Reviewed-by:
Francisco Iglesias <frasse.iglesias@gmail.com> Signed-off-by:
Jason Wang <jasowang@redhat.com>
-
Peter Maydell authored
Use a g_autofree heap allocation instead of a variable length array in dump_receive_iov(). The codebase has very few VLAs, and if we can get rid of them all we can make the compiler error on new additions. This is a defensive measure against security bugs where an on-stack dynamic allocation isn't correctly size-checked (e.g. CVE-2021-3527). Signed-off-by:
Peter Maydell <peter.maydell@linaro.org> Reviewed-by:
Francisco Iglesias <frasse.iglesias@gmail.com> Signed-off-by:
Jason Wang <jasowang@redhat.com>
-
Ilya Maximets authored
AF_XDP is a network socket family that allows communication directly with the network device driver in the kernel, bypassing most or all of the kernel networking stack. In the essence, the technology is pretty similar to netmap. But, unlike netmap, AF_XDP is Linux-native and works with any network interfaces without driver modifications. Unlike vhost-based backends (kernel, user, vdpa), AF_XDP doesn't require access to character devices or unix sockets. Only access to the network interface itself is necessary. This patch implements a network backend that communicates with the kernel by creating an AF_XDP socket. A chunk of userspace memory is shared between QEMU and the host kernel. 4 ring buffers (Tx, Rx, Fill and Completion) are placed in that memory along with a pool of memory buffers for the packet data. Data transmission is done by allocating one of the buffers, copying packet data into it and placing the pointer into Tx ring. After transmission, device will return the buffer via Completion ring. On Rx, device will take a buffer form a pre-populated Fill ring, write the packet data into it and place the buffer into Rx ring. AF_XDP network backend takes on the communication with the host kernel and the network interface and forwards packets to/from the peer device in QEMU. Usage example: -device virtio-net-pci,netdev=guest1,mac=00:16:35:AF:AA:5C -netdev af-xdp,ifname=ens6f1np1,id=guest1,mode=native,queues=1 XDP program bridges the socket with a network interface. It can be attached to the interface in 2 different modes: 1. skb - this mode should work for any interface and doesn't require driver support. With a caveat of lower performance. 2. native - this does require support from the driver and allows to bypass skb allocation in the kernel and potentially use zero-copy while getting packets in/out userspace. By default, QEMU will try to use native mode and fall back to skb. Mode can be forced via 'mode' option. To force 'copy' even in native mode, use 'force-copy=on' option. This might be useful if there is some issue with the driver. Option 'queues=N' allows to specify how many device queues should be open. Note that all the queues that are not open are still functional and can receive traffic, but it will not be delivered to QEMU. So, the number of device queues should generally match the QEMU configuration, unless the device is shared with something else and the traffic re-direction to appropriate queues is correctly configured on a device level (e.g. with ethtool -N). 'start-queue=M' option can be used to specify from which queue id QEMU should start configuring 'N' queues. It might also be necessary to use this option with certain NICs, e.g. MLX5 NICs. See the docs for examples. In a general case QEMU will need CAP_NET_ADMIN and CAP_SYS_ADMIN or CAP_BPF capabilities in order to load default XSK/XDP programs to the network interface and configure BPF maps. It is possible, however, to run with no capabilities. For that to work, an external process with enough capabilities will need to pre-load default XSK program, create AF_XDP sockets and pass their file descriptors to QEMU process on startup via 'sock-fds' option. Network backend will need to be configured with 'inhibit=on' to avoid loading of the program. QEMU will need 32 MB of locked memory (RLIMIT_MEMLOCK) per queue or CAP_IPC_LOCK. There are few performance challenges with the current network backends. First is that they do not support IO threads. This means that data path is handled by the main thread in QEMU and may slow down other work or may be slowed down by some other work. This also means that taking advantage of multi-queue is generally not possible today. Another thing is that data path is going through the device emulation code, which is not really optimized for performance. The fastest "frontend" device is virtio-net. But it's not optimized for heavy traffic either, because it expects such use-cases to be handled via some implementation of vhost (user, kernel, vdpa). In practice, we have virtio notifications and rcu lock/unlock on a per-packet basis and not very efficient accesses to the guest memory. Communication channels between backend and frontend devices do not allow passing more than one packet at a time as well. Some of these challenges can be avoided in the future by adding better batching into device emulation or by implementing vhost-af-xdp variant. There are also a few kernel limitations. AF_XDP sockets do not support any kinds of checksum or segmentation offloading. Buffers are limited to a page size (4K), i.e. MTU is limited. Multi-buffer support implementation for AF_XDP is in progress, but not ready yet. Also, transmission in all non-zero-copy modes is synchronous, i.e. done in a syscall. That doesn't allow high packet rates on virtual interfaces. However, keeping in mind all of these challenges, current implementation of the AF_XDP backend shows a decent performance while running on top of a physical NIC with zero-copy support. Test setup: 2 VMs running on 2 physical hosts connected via ConnectX6-Dx card. Network backend is configured to open the NIC directly in native mode. The driver supports zero-copy. NIC is configured to use 1 queue. Inside a VM - iperf3 for basic TCP performance testing and dpdk-testpmd for PPS testing. iperf3 result: TCP stream : 19.1 Gbps dpdk-testpmd (single queue, single CPU core, 64 B packets) results: Tx only : 3.4 Mpps Rx only : 2.0 Mpps L2 FWD Loopback : 1.5 Mpps In skb mode the same setup shows much lower performance, similar to the setup where pair of physical NICs is replaced with veth pair: iperf3 result: TCP stream : 9 Gbps dpdk-testpmd (single queue, single CPU core, 64 B packets) results: Tx only : 1.2 Mpps Rx only : 1.0 Mpps L2 FWD Loopback : 0.7 Mpps Results in skb mode or over the veth are close to results of a tap backend with vhost=on and disabled segmentation offloading bridged with a NIC. Signed-off-by:
Ilya Maximets <i.maximets@ovn.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> (docker/lcitool) Signed-off-by:
Jason Wang <jasowang@redhat.com>
-
Andrew Melnychenko authored
New features are subject to check with vhost-user and vdpa. Signed-off-by:
Yuri Benditovich <yuri.benditovich@daynix.com> Signed-off-by:
Andrew Melnychenko <andrew@daynix.com> Signed-off-by:
Jason Wang <jasowang@redhat.com>
-
Yuri Benditovich authored
Tap indicates support for USO features according to capabilities of current kernel module. Signed-off-by:
Yuri Benditovich <yuri.benditovich@daynix.com> Signed-off-by:
Andrew Melnychecnko <andrew@daynix.com> Signed-off-by:
Jason Wang <jasowang@redhat.com>
-
Andrew Melnychenko authored
Passing additional parameters (USOv4 and USOv6 offloads) when setting TAP offloads Signed-off-by:
Yuri Benditovich <yuri.benditovich@daynix.com> Signed-off-by:
Andrew Melnychenko <andrew@daynix.com> Signed-off-by:
Jason Wang <jasowang@redhat.com>
-
- Sep 13, 2023
-
-
Jonathan Perkin authored
qemu 8.1.0 breaks on illumos platforms due to _XOPEN_SOURCE and others no longer being set correctly, leading to breakage such as: https://us-central.manta.mnx.io/pkgsrc/public/reports/trunk/tools/20230908.1404/qemu-8.1.0/build.log This is a result of meson conversion which incorrectly matches against 'solaris' instead of 'sunos' for uname. First time submitting a patch here, hope I did it correctly. Thanks. Signed-off-by:
Jonathan Perkin <jonathan@perkin.org.uk> Message-ID: <ZPtdxtum9UVPy58J@perkin.org.uk> Cc: qemu-stable@nongnu.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Sep 08, 2023
-
-
Michael Tokarev authored
Signed-off-by:
Michael Tokarev <mjt@tls.msk.ru> Reviewed-by:
Eric Blake <eblake@redhat.com>
-
- Sep 07, 2023
-
-
Paolo Bonzini authored
CONFIG_SOLARIS is only used to pick tap implementations. But the target OS is invariant and does not depend on the configuration, so move away from config_host and just use unconditional rules in softmmu_ss. Reviewed-by:
Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Aug 31, 2023
-
-
Philippe Mathieu-Daudé authored
GLib recommend to use G_SOURCE_REMOVE / G_SOURCE_CONTINUE for GSourceFunc callbacks. Our FEWatchFunc is a GSourceFunc returning such value. Use such definitions which are "more memorable" [*]. [*] https://docs.gtk.org/glib/callback.SourceFunc.html#return-value Signed-off-by:
Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by:
Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230705133139.54419-5-philmd@linaro.org>
-
- Jul 10, 2023
-
-
Hawkins Jiawei authored
Enable SVQ with VIRTIO_NET_F_CTRL_RX_EXTRA feature. Signed-off-by:
Hawkins Jiawei <yin31149@gmail.com> Acked-by:
Eugenio Pérez <eperezma@redhat.com> Message-Id: <15ecc49975f9b8d1316ed4296879564a18abf31e.1688797728.git.yin31149@gmail.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Hawkins Jiawei authored
This patch refactors vhost_vdpa_net_load_rx() to restore the packet receive filtering state in relation to VIRTIO_NET_F_CTRL_RX_EXTRA feature at device's startup. Signed-off-by:
Hawkins Jiawei <yin31149@gmail.com> Message-Id: <abddc477a476f756de6e3d24c0e9f7b21c99a4c1.1688797728.git.yin31149@gmail.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Hawkins Jiawei authored
Enable SVQ with VIRTIO_NET_F_CTRL_RX feature. Signed-off-by:
Hawkins Jiawei <yin31149@gmail.com> Acked-by:
Eugenio Pérez <eperezma@redhat.com> Message-Id: <5d6173a6d7c4c514c98362b404c019f52d73b06c.1688743107.git.yin31149@gmail.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Hawkins Jiawei authored
Due to the size limitation of the out buffer sent to the vdpa device, which is determined by vhost_vdpa_net_cvq_cmd_len(), excessive CVQ command is truncated in QEMU. As a result, the vdpa device rejects this flawd CVQ command. However, the problem is that, the VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ command has a variable length, which may exceed vhost_vdpa_net_cvq_cmd_len() if the guest sets more than `MAC_TABLE_ENTRIES` MAC addresses for the filter table. This patch solves this problem by following steps: * Increase the out buffer size to vhost_vdpa_net_cvq_cmd_page_len(), which represents the size of the buffer that is allocated and mmaped. This ensures that everything works correctly as long as the guest sets fewer than `(vhost_vdpa_net_cvq_cmd_page_len() - sizeof(struct virtio_net_ctrl_hdr) - 2 * sizeof(struct virtio_net_ctrl_mac)) / ETH_ALEN` MAC addresses. Considering the highly unlikely scenario for the guest setting more than that number of MAC addresses for the filter table, this should work fine for the majority of cases. * If the CVQ command exceeds vhost_vdpa_net_cvq_cmd_page_len(), instead of directly sending this CVQ command, QEMU should send a VIRTIO_NET_CTRL_RX_PROMISC CVQ command to vdpa device. Addtionally, a fake VIRTIO_NET_CTRL_MAC_TABLE_SET command including (`MAC_TABLE_ENTRIES` + 1) non-multicast MAC addresses and (`MAC_TABLE_ENTRIES` + 1) multicast MAC addresses should be provided to the device model. By doing so, the vdpa device turns promiscuous mode on, aligning with the VirtIO standard. The device model marks `n->mac_table.uni_overflow` and `n->mac_table.multi_overflow`, which aligns with the state of the vdpa device. Note that the bug cannot be triggered at the moment, since VIRTIO_NET_F_CTRL_RX feature is not enabled for SVQ. Fixes: 7a7f87e9 ("vdpa: Move command buffers map to start of net device") Signed-off-by:
Hawkins Jiawei <yin31149@gmail.com> Message-Id: <267e15e4eed2d7aeb9887f193da99a13d22a2f1d.1688743107.git.yin31149@gmail.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Hawkins Jiawei authored
We can access the CVQ header through `struct virtio_net_ctrl_hdr`, instead of accessing it through a `uint8_t` pointer, which improves the code's readability and maintainability. Signed-off-by:
Hawkins Jiawei <yin31149@gmail.com> Message-Id: <cd522e06a4371e9d6b8a1c1a86f90a92401d56e8.1688743107.git.yin31149@gmail.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Hawkins Jiawei authored
This patch introduces vhost_vdpa_net_load_rx_mode() and vhost_vdpa_net_load_rx() to restore the packet receive filtering state in relation to VIRTIO_NET_F_CTRL_RX feature at device's startup. Signed-off-by:
Hawkins Jiawei <yin31149@gmail.com> Message-Id: <804cedac93e19ba3b810d52b274ca5ec11469f09.1688743107.git.yin31149@gmail.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Hawkins Jiawei authored
This patch refactors vhost_vdpa_net_load_mac() to restore the MAC address filtering state at device's startup. Signed-off-by:
Hawkins Jiawei <yin31149@gmail.com> Message-Id: <4b9550c14bc8c98c8f48e04dbf3d3ac41489d3fd.1688743107.git.yin31149@gmail.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Hawkins Jiawei authored
According to VirtIO standard, "The driver MUST follow the VIRTIO_NET_CTRL_MAC_TABLE_SET command by a le32 number, followed by that number of non-multicast MAC addresses, followed by another le32 number, followed by that number of multicast addresses." Considering that these data is not stored in contiguous memory, this patch refactors vhost_vdpa_net_load_cmd() to accept scattered data, eliminating the need for an addtional data copy or packing the data into s->cvq_cmd_out_buffer outside of vhost_vdpa_net_load_cmd(). Signed-off-by:
Hawkins Jiawei <yin31149@gmail.com> Message-Id: <3482cc50eebd13db4140b8b5dec9d0cc25b20b1b.1688743107.git.yin31149@gmail.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Hawkins Jiawei authored
QEMU uses vhost_handle_guest_kick() to forward guest's available buffers to the vdpa device in SVQ avail ring. In vhost_handle_guest_kick(), a `g_autofree` `elem` is used to iterate through the available VirtQueueElements. This `elem` is then passed to `svq->ops->avail_handler`, specifically to the vhost_vdpa_net_handle_ctrl_avail(). If this handler fails to process the CVQ command, vhost_handle_guest_kick() regains ownership of the `elem`, and either frees it or requeues it. Yet the problem is that, vhost_vdpa_net_handle_ctrl_avail() mistakenly frees the `elem`, even if it fails to forward the CVQ command to vdpa device. This can result in a use-after-free for the `elem` in vhost_handle_guest_kick(). This patch solves this problem by refactoring vhost_vdpa_net_handle_ctrl_avail() to only freeing the `elem` if it owns it. Fixes: bd907ae4 ("vdpa: manual forward CVQ buffers") Signed-off-by:
Hawkins Jiawei <yin31149@gmail.com> Message-Id: <e3f2d7db477734afe5c6a5ab3fa8b8317514ea34.1688746840.git.yin31149@gmail.com> Reviewed-by:
Eugenio Pérez <eperezma@redhat.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Hawkins Jiawei authored
According to VirtIO standard, "The class, command and command-specific-data are set by the driver, and the device sets the ack byte. There is little it can do except issue a diagnostic if ack is not VIRTIO_NET_OK." Therefore, QEMU should stop sending the queued SVQ commands and cancel the device startup if the device's ack is not VIRTIO_NET_OK. Yet the problem is that, vhost_vdpa_net_load_offloads() returns 1 based on `*s->status != VIRTIO_NET_OK` when the device's ack is VIRTIO_NET_ERR. As a result, net->nc->info->load() also returns 1, this makes vhost_net_start_one() incorrectly assume the device state is successfully loaded by vhost_vdpa_net_load() and return 0, instead of goto `fail` label to cancel the device startup, as vhost_net_start_one() only cancels the device startup when net->nc->info->load() returns a negative value. This patch fixes this problem by returning -EIO when the device's ack is not VIRTIO_NET_OK. Fixes: 0b58d368 ("vdpa: Add vhost_vdpa_net_load_offloads()") Signed-off-by:
Hawkins Jiawei <yin31149@gmail.com> Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Eugenio Pérez <eperezma@redhat.com> Message-Id: <b0396b80e96322b86f1a0b10c098fc1edd947d72.1688438055.git.yin31149@gmail.com> Tested-by:
Lei Yang <leiyang@redhat.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Hawkins Jiawei authored
According to VirtIO standard, "The class, command and command-specific-data are set by the driver, and the device sets the ack byte. There is little it can do except issue a diagnostic if ack is not VIRTIO_NET_OK." Therefore, QEMU should stop sending the queued SVQ commands and cancel the device startup if the device's ack is not VIRTIO_NET_OK. Yet the problem is that, vhost_vdpa_net_load_mq() returns 1 based on `*s->status != VIRTIO_NET_OK` when the device's ack is VIRTIO_NET_ERR. As a result, net->nc->info->load() also returns 1, this makes vhost_net_start_one() incorrectly assume the device state is successfully loaded by vhost_vdpa_net_load() and return 0, instead of goto `fail` label to cancel the device startup, as vhost_net_start_one() only cancels the device startup when net->nc->info->load() returns a negative value. This patch fixes this problem by returning -EIO when the device's ack is not VIRTIO_NET_OK. Fixes: f64c7cda ("vdpa: Add vhost_vdpa_net_load_mq") Signed-off-by:
Hawkins Jiawei <yin31149@gmail.com> Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Eugenio Pérez <eperezma@redhat.com> Message-Id: <ec515ebb0b4f56368751b9e318e245a5d994fa72.1688438055.git.yin31149@gmail.com> Tested-by:
Lei Yang <leiyang@redhat.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Hawkins Jiawei authored
According to VirtIO standard, "The class, command and command-specific-data are set by the driver, and the device sets the ack byte. There is little it can do except issue a diagnostic if ack is not VIRTIO_NET_OK." Therefore, QEMU should stop sending the queued SVQ commands and cancel the device startup if the device's ack is not VIRTIO_NET_OK. Yet the problem is that, vhost_vdpa_net_load_mac() returns 1 based on `*s->status != VIRTIO_NET_OK` when the device's ack is VIRTIO_NET_ERR. As a result, net->nc->info->load() also returns 1, this makes vhost_net_start_one() incorrectly assume the device state is successfully loaded by vhost_vdpa_net_load() and return 0, instead of goto `fail` label to cancel the device startup, as vhost_net_start_one() only cancels the device startup when net->nc->info->load() returns a negative value. This patch fixes this problem by returning -EIO when the device's ack is not VIRTIO_NET_OK. Fixes: f73c0c43 ("vdpa: extract vhost_vdpa_net_load_mac from vhost_vdpa_net_load") Signed-off-by:
Hawkins Jiawei <yin31149@gmail.com> Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Eugenio Pérez <eperezma@redhat.com> Message-Id: <a21731518644abbd0c495c5b7960527c5911f80d.1688438055.git.yin31149@gmail.com> Tested-by:
Lei Yang <leiyang@redhat.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
- Jul 08, 2023
-
-
Hawkins Jiawei authored
This patch sorts the vdpa_feature_bits array alphabetically in ascending order to avoid future duplicates. Signed-off-by:
Hawkins Jiawei <yin31149@gmail.com> Signed-off-by:
Michael Tokarev <mjt@tls.msk.ru>
-
Hawkins Jiawei authored
This entry was duplicated on referenced commit. Removing it. Fixes: 40237840 ("vhost-vdpa: multiqueue support") Signed-off-by:
Hawkins Jiawei <yin31149@gmail.com> Reviewed-by:
Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by:
Michael Tokarev <mjt@tls.msk.ru>
-
- Jul 07, 2023
-
-
Laurent Vivier authored
Move the file descriptor type checking before doing anything with it. If it's not usable, don't close it as it could be in use by another part of QEMU, only fail and report an error. Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com>
-
Laurent Vivier authored
Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com>
-
Laurent Vivier authored
Use directly net_socket_fd_init_stream() and net_socket_fd_init_dgram() when the socket type is already known. Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com>
-
- Jun 26, 2023
-
-
Ani Sinha authored
When a peer nic is still attached to the vdpa backend, it is too early to free up the vhost-net and vdpa structures. If these structures are freed here, then QEMU crashes when the guest is being shut down. The following call chain would result in an assertion failure since the pointer returned from vhost_vdpa_get_vhost_net() would be NULL: do_vm_stop() -> vm_state_notify() -> virtio_set_status() -> virtio_net_vhost_status() -> get_vhost_net(). Therefore, we defer freeing up the structures until at guest shutdown time when qemu_cleanup() calls net_cleanup() which then calls qemu_del_net_client() which would eventually call vhost_vdpa_cleanup() again to free up the structures. This time, the loop in net_cleanup() ensures that vhost_vdpa_cleanup() will be called one last time when all the peer nics are detached and freed. All unit tests pass with this change. CC: imammedo@redhat.com CC: jusual@redhat.com CC: mst@redhat.com Fixes: CVE-2023-3301 Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2128929 Signed-off-by:
Ani Sinha <anisinha@redhat.com> Message-Id: <20230619065209.442185-1-anisinha@redhat.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Eugenio Pérez authored
Bug introducing when refactoring. Otherway, the guest never received the used buffer. Fixes: be4278b6 ("vdpa: extract vhost_vdpa_net_cvq_add from vhost_vdpa_net_handle_ctrl_avail") Signed-off-by:
Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230602173451.1917999-1-eperezma@redhat.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Tested-by:
Lei Yang <leiyang@redhat.com>
-
Eugenio Pérez authored
QEMU does not emulate it so it must be disabled as long as the backend does not support it. Signed-off-by:
Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230602173328.1917385-1-eperezma@redhat.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Tested-by:
Lei Yang <leiyang@redhat.com>
-
Hawkins Jiawei authored
Enable SVQ with VIRTIO_NET_F_CTRL_GUEST_OFFLOADS feature. Signed-off-by:
Hawkins Jiawei <yin31149@gmail.com> Acked-by:
Jason Wang <jasowang@redhat.com> Message-Id: <778d642ecae6deed8a218b0e6232e4d7bb96b439.1685704856.git.yin31149@gmail.com> Tested-by:
Lei Yang <leiyang@redhat.com> Reviewed-by:
Eugenio Pérez <eperezma@redhat.com> Tested-by:
Eugenio Pérez <eperezma@redhat.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Hawkins Jiawei authored
This patch introduces vhost_vdpa_net_load_offloads() to restore offloads state at device's startup. Signed-off-by:
Hawkins Jiawei <yin31149@gmail.com> Message-Id: <7e2b5cad9c48c917df53d80dec27dbfeb513e1a3.1685704856.git.yin31149@gmail.com> Tested-by:
Lei Yang <leiyang@redhat.com> Reviewed-by:
Eugenio Pérez <eperezma@redhat.com> Tested-by:
Eugenio Pérez <eperezma@redhat.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Hawkins Jiawei authored
We can use virtio_vdev_has_feature() instead of manually accessing the features. Signed-off-by:
Hawkins Jiawei <yin31149@gmail.com> Acked-by:
Eugenio Pérez <eperezma@redhat.com> Message-Id: <ff838d30206209fd865511b16ffb34cc0d5e8d8f.1685704856.git.yin31149@gmail.com> Tested-by:
Lei Yang <leiyang@redhat.com> Reviewed-by:
Eugenio Pérez <eperezma@redhat.com> Tested-by:
Eugenio Pérez <eperezma@redhat.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Eugenio Pérez authored
The vdpa devices that use va addresses neeeds these maps shared. Otherwise, vhost_vdpa checks will refuse to accept the maps. The mmap call will always return a page aligned address, so removing the qemu_memalign call. Keeping the ROUND_UP for the size as we still need to DMA-map them in full. Not applying fixes tag as it never worked with va devices. Signed-off-by:
Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230602143854.1879091-4-eperezma@redhat.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Eugenio Pérez authored
We need to call it from resource cleanup context, as munmap needs the size of the mappings. Signed-off-by:
Eugenio Pérez <eperezma@redhat.com> Reviewed-by:
Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230602143854.1879091-3-eperezma@redhat.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Eugenio Pérez authored
It was a mistake to forbid in all cases, as SVQ is already able to send all the CVQ messages before start forwarding data vqs. It actually caused a regression, making impossible to migrate device previously migratable. Fixes: 36e46472 ("vdpa: add vhost_vdpa_net_valid_svq_features") Signed-off-by:
Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230602143854.1879091-2-eperezma@redhat.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Tested-by:
Lei Yang <leiyang@redhat.com>
-
- Jun 23, 2023
-
-
Eugenio Pérez authored
Evaluating it at start time instead of initialization time may make the guest capable of dynamically adding or removing migration blockers. Also, moving to initialization reduces the number of ioctls in the migration, reducing failure possibilities. As a drawback we need to check for CVQ isolation twice: one time with no MQ negotiated and another one acking it, as long as the device supports it. This is because Vring ASID / group management is based on vq indexes, but we don't know the index of CVQ before negotiating MQ. Signed-off-by:
Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230526153143.470745-3-eperezma@redhat.com> Tested-by:
Lei Yang <leiyang@redhat.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com>
-
Eugenio Pérez authored
We need to tell in the caller, as some errors are expected in a normal workflow. In particular, parent drivers in recent kernels with VHOST_BACKEND_F_IOTLB_ASID may not support vring groups. In that case, -ENOTSUP is returned. This is the case of vp_vdpa in Linux 6.2. Next patches in this series will use that information to know if it must abort or not. Also, next patches return properly an errp instead of printing with error_report. Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230526153143.470745-2-eperezma@redhat.com> Tested-by:
Lei Yang <leiyang@redhat.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
- Jun 20, 2023
-
-
Philippe Mathieu-Daudé authored
We use the user_ss[] array to hold the user emulation sources, and the softmmu_ss[] array to hold the system emulation ones. Hold the latter in the 'system_ss[]' array for parity with user emulation. Mechanical change doing: $ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss) Signed-off-by:
Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by:
Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-10-philmd@linaro.org> Signed-off-by:
Richard Henderson <richard.henderson@linaro.org>
-
- Jun 13, 2023
-
-
Philippe Mathieu-Daudé authored
Fix the following Cocoa trivial warnings: C compiler for the host machine: cc (clang 14.0.0 "Apple clang version 14.0.0 (clang-1400.0.29.202)") Objective-C compiler for the host machine: clang (clang 14.0.0) [100/334] Compiling Objective-C object libcommon.fa.p/net_vmnet-bridged.m.o net/vmnet-bridged.m:40:31: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] static char* get_valid_ifnames() ^ void [742/1436] Compiling Objective-C object libcommon.fa.p/ui_cocoa.m.o ui/cocoa.m:1937:22: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] static int cocoa_main() ^ void Signed-off-by:
Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by:
Akihiko Odaki <akihiko.odaki@daynix.com> Message-Id: <20230425192820.34063-1-philmd@linaro.org>
-