Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220105213937.1113508-4-alistair.francis@opensource.wdc.com>

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220105213937.1113508-3-alistair.francis@opensource.wdc.com>

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220105213937.1113508-2-alistair.francis@opensource.wdc.com>

It's obvious that PDMA supports 64-bit access of 64-bit registers, and
in previous commit, we confirm that PDMA supports 32-bit access of
both 32/64-bit registers. Thus, we configure 32/64-bit memory access
of PDMA registers as valid in general.

Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20220104063408.658169-3-jim.shu@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Real PDMA supports high 32-bit read/write memory access of 64-bit
register.

The following result is PDMA tested in U-Boot on Unmatched board:

1. Real PDMA allows high 32-bit read/write to 64-bit register.
=> mw.l 0x3000000 0x0                      <= Disclaim channel 0
=> mw.l 0x3000000 0x1                      <= Claim channel 0
=> mw.l 0x3000010 0x80000000               <= Write low 32-bit NextDest (NextDest = 0x280000000)
=> mw.l 0x3000014 0x2                      <= Write high 32-bit NextDest
=> md.l 0x3000010 1                        <= Dump low 32-bit NextDest
03000010: 80000000
=> md.l 0x3000014 1                        <= Dump high 32-bit NextDest
03000014: 00000002
=> mw.l 0x3000018 0x80001000               <= Write low 32-bit NextSrc (NextSrc = 0x280001000)
=> mw.l 0x300001c 0x2                      <= Write high 32-bit NextSrc
=> md.l 0x3000018 1                        <= Dump low 32-bit NextSrc
03000010: 80001000
=> md.l 0x300001c 1                        <= Dump high 32-bit NextSrc
03000014: 00000002

2. PDMA transfer from 0x280001000 to 0x280000000 is OK.
=> mw.q 0x3000008 0x4                      <= NextBytes = 4
=> mw.l 0x3000004 0x22000000               <= wsize = rsize = 2 (2^2 = 4 bytes)
=> mw.l 0x280000000 0x87654321             <= Fill test data to dst
=> mw.l 0x280001000 0x12345678             <= Fill test data to src
=> md.l 0x280000000 1; md.l 0x280001000 1  <= Dump src/dst memory contents
280000000: 87654321                              !Ce.
280001000: 12345678                              xV4.
=> md.l 0x3000000 8                        <= Dump PDMA status
03000000: 00000001 22000000 00000004 00000000    ......."........
03000010: 80000000 00000002 80001000 00000002    ................
=> mw.l 0x3000000 0x3                      <= Set channel 0 run and claim bits
=> md.l 0x3000000 8                        <= Dump PDMA status
03000000: 40000001 22000000 00000004 00000000    ...@..."........
03000010: 80000000 00000002 80001000 00000002    ................
=> md.l 0x280000000 1; md.l 0x280001000 1  <= Dump src/dst memory contents
280000000: 12345678                               xV4.
280001000: 12345678                               xV4.

Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20220104063408.658169-2-jim.shu@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

As per the privilege specification, any access from S/U mode should fail
if no pmp region is configured and pmp is present, othwerwise access
should succeed.

Fixes: d102f19a (target/riscv/pmp: Raise exception if no PMP entry is configured)
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211214092659.15709-1-nikita.shubin@maquefel.me
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

virtio,pci,pc: features,fixes,cleanups

New virtio mem options.
A vhost-user cleanup.
Control over smbios entry point type.
Config interrupt support for vdpa.
Fixes, cleanups all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 07 Jan 2022 04:30:41 PM PST
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu

: (55 commits)
  tests: acpi: Add updated TPM related tables
  acpi: tpm: Add missing device identification objects
  tests: acpi: prepare for updated TPM related tables
  virtio/vhost-vsock: don't double close vhostfd, remove redundant cleanup
  hw/scsi/vhost-scsi: don't double close vhostfd on error
  hw/scsi/vhost-scsi: don't leak vqs on error
  docs: reSTify virtio-balloon-stats documentation and move to docs/interop
  hw/i386/pc: Add missing property descriptions
  acpihp: simplify acpi_pcihp_disable_root_bus
  tests: acpi: SLIC: update expected blobs
  tests: acpi: add SLIC table test
  tests: acpi: whitelist expected blobs before changing them
  acpi: fix QEMU crash when started with SLIC table
  intel-iommu: correctly check passthrough during translation
  virtio-mem: Set "unplugged-inaccessible=auto" for the 7.0 machine on x86
  virtio-mem: Support VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE
  linux-headers: sync VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE
  MAINTAINERS: Add a separate entry for acpi/VIOT tables
  virtio: signal after wrapping packed used_idx
  virtio-mem: Support "prealloc=on" option
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

The updated TPM related tables have the following additions:

   Device (TPM)
   {
       Name (_HID, "MSFT0101" /* TPM 2.0 Security Device */)  // _HID: Hardware ID
+      Name (_STR, "TPM 2.0 Device")  // _STR: Description String
+      Name (_UID, One)  // _UID: Unique ID
       Name (_STA, 0x0F)  // _STA: Status
       Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Ani Sinha <ani@anisinha.ca>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-id: 20211223022310.575496-4-stefanb@linux.ibm.com
Message-Id: <20220104175806.872996-4-stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Add missing TPM device identification objects _STR and _UID. They will
appear as files 'description' and 'uid' under Linux sysfs.

Following inspection of sysfs entries for hardware TPMs we chose
uid '1'.

Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Ani Sinha <ani@anisinha.ca>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/708


Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Shannon Zhao <shannon.zhaosl@gmail.com>
Message-id: 20211223022310.575496-3-stefanb@linux.ibm.com
Message-Id: <20220104175806.872996-3-stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

Replace existing TPM related tables, that are about to change, with
empty files.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Ani Sinha <ani@anisinha.ca>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-id: 20211223022310.575496-2-stefanb@linux.ibm.com
Message-Id: <20220104175806.872996-2-stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>

In case of an error during initialization in vhost_dev_init, vhostfd is
closed in vhost_dev_cleanup. Remove close from err_virtio as it's both
redundant and causes a double close on vhostfd.

Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20211129125204.1108088-1-d-tatianin@yandex-team.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost_dev_init calls vhost_dev_cleanup on error, which closes vhostfd,
don't double close it.

Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20211129132358.1110372-2-d-tatianin@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost_dev_init calls vhost_dev_cleanup in case of an error during
initialization, which zeroes out the entire vsc->dev as well as the
vsc->dev.vqs pointer. This prevents us from properly freeing it in free_vqs.
Keep a local copy of the pointer so we can free it later.

Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20211129132358.1110372-1-d-tatianin@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

The virtio-balloon-stats documentation might be useful for people that
are implementing software that talks to QEMU via QMP, so this should
reside in the docs/interop/ directory. While we're at it, also convert
the file to restructured text and mention it in the MAINTAINERS file.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220105115245.420945-1-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

When running "qemu-system-x86_64 -M pc,help" I noticed that some
properties were still missing their description. Add them now so
that users get at least a slightly better idea what they are all
about.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206134255.94784-1-thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Get rid of the static variable that keeps track of whether hotplug has been
disabled on the root pci bus. Simply use qbus_is_hotpluggable() api to
perform the same check. This eliminates additional if conditional and
simplifies the function.

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1640764674-7784-1-git-send-email-ani@anirban.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211227193120.1084176-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

When user uses '-acpitable' to add SLIC table, some ACPI
tables (FADT) will change its 'Oem ID'/'Oem Table ID' fields to
match that of SLIC. Test makes sure thati QEMU handles
those fields correctly when SLIC table is added with
'-acpitable' option.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211227193120.1084176-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211227193120.1084176-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

if QEMU is started with used provided SLIC table blob,

  -acpitable sig=SLIC,oem_id='CRASH ',oem_table_id="ME",oem_rev=00002210,asl_compiler_id="",asl_compiler_rev=00000000,data=/dev/null
it will assert with:

  hw/acpi/aml-build.c:61:build_append_padded_str: assertion failed: (len <= maxlen)

and following backtrace:

  ...
  build_append_padded_str (array=0x555556afe320, str=0x555556afdb2e "CRASH ME", maxlen=0x6, pad=0x20) at hw/acpi/aml-build.c:61
  acpi_table_begin (desc=0x7fffffffd1b0, array=0x555556afe320) at hw/acpi/aml-build.c:1727
  build_fadt (tbl=0x555556afe320, linker=0x555557ca3830, f=0x7fffffffd318, oem_id=0x555556afdb2e "CRASH ME", oem_table_id=0x555556afdb34 "ME") at hw/acpi/aml-build.c:2064
  ...

which happens due to acpi_table_begin() expecting NULL terminated
oem_id and oem_table_id strings, which is normally the case, but
in case of user provided SLIC table, oem_id points to table's blob
directly and as result oem_id became longer than expected.

Fix issue by handling oem_id consistently and make acpi_get_slic_oem()
return NULL terminated strings.

PS:
After [1] refactoring, oem_id semantics became inconsistent, where
NULL terminated string was coming from machine and old way pointer
into byte array coming from -acpitable option. That used to work
since build_header() wasn't expecting NULL terminated string and
blindly copied the 1st 6 bytes only.

However commit [2] broke that by replacing build_header() with
acpi_table_begin(), which was expecting NULL terminated string
and was checking oem_id size.

1) 602b4582 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
2)
Fixes: 4b56e1e4 ("acpi: build_fadt: use acpi_table_begin()/acpi_table_end() instead of build_header()")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/786


Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211227193120.1084176-2-imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Denis Lisov <dennis.lissov@gmail.com>
Tested-by: Alexander Tsoy <alexander@tsoy.me>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

When scalable mode is enabled, the passthrough more is not determined
by the context entry but PASID entry, so switch to use the logic of
vtd_dev_pt_enabled() to determine the passthrough mode in
vtd_do_iommu_translate().

Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220105041945.13459-2-jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Set the new default to "auto", keeping it set to "off" for compat
machines. This property is only available for x86 targets.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211217134039.29670-4-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

With VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE, we signal the VM that reading
unplugged memory is not supported. We have to fail feature negotiation
in case the guest does not support VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE.

First, VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE is required to properly handle
memory backends (or architectures) without support for the shared zeropage
in the hypervisor cleanly. Without the shared zeropage, even reading an
unpopulated virtual memory location can populate real memory and
consequently consume memory in the hypervisor. We have a guaranteed shared
zeropage only on MAP_PRIVATE anonymous memory.

Second, we want VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE to be the default
long-term as even populating the shared zeropage can be problematic: for
example, without THP support (possible) or without support for the shared
huge zeropage with THP (unlikely), the PTE page tables to hold the shared
zeropage entries can consume quite some memory that cannot be reclaimed
easily.

Third, there are other optimizations+features (e.g., protection of
unplugged memory, reducing the total memory slot size and bitmap sizes)
that will require VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE.

We really only support x86 targets with virtio-mem for now (and
Linux similarly only support x86), but that might change soon, so prepare
for different targets already.

Add a new "unplugged-inaccessible" tristate property for x86 targets:
- "off" will keep VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE unset and legacy
  guests working.
- "on" will set VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE and stop legacy guests
  from using the device.
- "auto" selects the default based on support for the shared zeropage.

Warn in case the property is set to "off" and we don't have support for the
shared zeropage.

For existing compat machines, the property will default to "off", to
not change the behavior but eventually warn about a problematic setup.
Short-term, we'll set the property default to "auto" for new QEMU machines.
Mid-term, we'll set the property default to "on" for new QEMU machines.
Long-term, we'll deprecate the parameter and disallow legacy
guests completely.

The property has to match on the migration source and destination. "auto"
will result in the same VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE setting as long
as the qemu command line (esp. memdev) match -- so "auto" is good enough
for migration purposes and the parameter doesn't have to be migrated
explicitly.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211217134039.29670-3-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Let's synchronize the new feature flag, available in Linux since
v5.16-rc1.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211217134039.29670-2-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

All work related to VIOT tables are being done by Jean. Adding him as the
maintainer for acpi VIOT table code in qemu.

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20211213045924.344214-1-ani@anisinha.ca>
Acked-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Packed Virtqueues wrap used_idx instead of letting it run freely like
Split Virtqueues do. If the used ring wraps more than once there is no
way to compare vq->signalled_used and vq->used_idx in
virtio_packed_should_notify() since they are modulo vq->vring.num.

This causes the device to stop sending used buffer notifications when
when virtio_packed_should_notify() is called less than once each time
around the used ring.

It is possible to trigger this with virtio-blk's dataplane
notify_guest_bh() irq coalescing optimization. The call to
virtio_notify_irqfd() (and virtio_packed_should_notify()) is deferred to
a BH. If the guest driver is polling it can complete and submit more
requests before the BH executes, causing the used ring to wrap more than
once. The result is that the virtio-blk device ceases to raise
interrupts and I/O hangs.

Cc: Tiwei Bie <tiwei.bie@intel.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211130134510.267382-1-stefanha@redhat.com>
Fixes: 86044b24 ("virtio: basic packed virtqueue support")
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

For scarce memory resources, such as hugetlb, we want to be able to
prealloc such memory resources in order to not crash later on access. On
simple user errors we could otherwise easily run out of memory resources
an crash the VM -- pretty much undesired.

For ordinary memory devices, such as DIMMs, we preallocate memory via the
memory backend for such use cases; however, with virtio-mem we're dealing
with sparse memory backends; preallocating the whole memory backend
destroys the whole purpose of virtio-mem.

Instead, we want to preallocate memory when actually exposing memory to the
VM dynamically, and fail plugging memory gracefully + warn the user in case
preallocation fails.

A common use case for hugetlb will be using "reserve=off,prealloc=off" for
the memory backend and "prealloc=on" for the virtio-mem device. This
way, no huge pages will be reserved for the process, but we can recover
if there are no actual huge pages when plugging memory. Libvirt is
already prepared for this.

Note that preallocation cannot protect from the OOM killer -- which
holds true for any kind of preallocation in QEMU. It's primarily useful
only for scarce memory resources such as hugetlb, or shared file-backed
memory. It's of little use for ordinary anonymous memory that can be
swapped, KSM merged, ... but we won't forbid it.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211217134611.31172-9-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Temporarily modifying the SIGBUS handler is really nasty, as we might be
unlucky and receive an MCE SIGBUS while having our handler registered.
Unfortunately, there is no way around messing with SIGBUS when
MADV_POPULATE_WRITE is not applicable or not around.

Let's forward SIGBUS that don't belong to us to the already registered
handler and document the situation.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211217134611.31172-8-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Merge tag 'pull-target-arm-20220107' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * Add dummy Aspeed AST2600 Display Port MCU (DPMCU)
 * Add missing FEAT_TLBIOS instructions
 * arm_gicv3_its: Various bug fixes and cleanups
 * kudo-bmc: Add more devices

# gpg: Signature made Fri 07 Jan 2022 09:20:24 AM PST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]

* tag 'pull-target-arm-20220107' of https://git.linaro.org/people/pmaydell/qemu-arm

:
  hw/arm: kudo add lm75s on bus 13
  hw/arm: add i2c muxes to kudo-bmc
  hw/arm: attach MMC to kudo-bmc
  hw/arm: Add kudo i2c eeproms.
  hw/intc/arm_gicv3_its: Rename max_l2_entries to num_l2_entries
  hw/intc/arm_gicv3_its: Fix various off-by-one errors
  hw/intc/arm_gicv3_its: Use FIELD macros for CTEs
  hw/intc/arm_gicv3_its: Correct comment about CTE RDBase field size
  hw/intc/arm_gicv3_its: Use FIELD macros for DTEs
  hw/intc/arm_gicv3_its: Correct handling of MAPI
  hw/intc/arm_gicv3_its: Don't misuse GITS_TYPE_PHYSICAL define
  hw/intc/arm_gicv3_its: Correct setting of TableDesc entry_sz
  hw/intc/arm_gicv3_its: Reduce code duplication in extract_table_params()
  hw/intc/arm_gicv3_its: Don't return early in extract_table_params() loop
  hw/intc/arm_gicv3_its: Remove maxids union from TableDesc
  hw/intc/arm_gicv3_its: Remove redundant ITS_CTLR_ENABLED define
  hw/intc/arm_gicv3_its: Correct off-by-one bounds check on rdbase
  target/arm: Add missing FEAT_TLBIOS instructions
  Add dummy Aspeed AST2600 Display Port MCU (DPMCU)

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Add the four lm75s behind the mux on bus 13.

Tested by booting the firmware:
lm75 42-0048: hwmon0: sensor 'lm75'
lm75 43-0049: supply vs not found, using dummy regulator
lm75 43-0049: hwmon1: sensor 'lm75'
lm75 44-0048: supply vs not found, using dummy regulator
lm75 44-0048: hwmon2: sensor 'lm75'
lm75 45-0049: supply vs not found, using dummy regulator
lm75 45-0049: hwmon3: sensor 'lm75'

Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220102215844.2888833-5-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220102215844.2888833-4-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Signed-off-by: Shengtan Mao <stmao@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Chris Rauer <crauer@google.com>
Message-id: 20220102215844.2888833-3-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Signed-off-by: Chris Rauer <crauer@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220102215844.2888833-2-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

In several places we have a local variable max_l2_entries which is
the number of entries which will fit in a level 2 table.  The
calculations done on this value are correct; rename it to
num_l2_entries to fit the convention we're using in this code.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

The ITS code has to check whether various parameters passed in
commands are in-bounds, where the limit is defined in terms of the
number of bits that are available for the parameter.  (For example,
the GITS_TYPER.Devbits ID register field specifies the number of
DeviceID bits minus 1, and device IDs passed in the MAPTI and MAPD
command packets must fit in that many bits.)

Currently we have off-by-one bugs in many of these bounds checks.
The typical problem is that we define a max_foo as 1 << n. In
the Devbits example, we set
  s->dt.max_ids = 1UL << (GITS_TYPER.Devbits + 1).
However later when we do the bounds check we write
  if (devid > s->dt.max_ids) { /* command error */ }
which incorrectly permits a devid of 1 << n.

These bugs will not cause QEMU crashes because the ID values being
checked are only used for accesses into tables held in guest memory
which we access with address_space_*() functions, but they are
incorrect behaviour of our emulation.

Fix them by standardizing on this pattern:
 * bounds limits are named num_foos and are the 2^n value
   (equal to the number of valid foo values)
 * bounds checks are either
   if (fooid < num_foos) { good }
   or
   if (fooid >= num_foos) { bad }

In this commit we fix the handling of the number of IDs
in the device table and the collection table, and the number
of commands that will fit in the command queue.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

Use FIELD macros to handle CTEs, rather than ad-hoc mask-and-shift.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

The comment says that in our CTE format the RDBase field is 36 bits;
in fact for us it is only 16 bits, because we use the RDBase format
where it specifies a 16-bit CPU number. The code already uses
RDBASE_PROCNUM_LENGTH (16) as the field width, so fix the comment
to match it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

Currently the ITS code that reads and writes DTEs uses open-coded
shift-and-mask to assemble the various fields into the 64-bit DTE
word.  The names of the macros used for mask and shift values are
also somewhat inconsistent, and don't follow our usual convention
that a MASK macro should specify the bits in their place in the word.
Replace all these with use of the FIELD macro.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

The MAPI command takes arguments DeviceID, EventID, ICID, and is
defined to be equivalent to MAPTI DeviceID, EventID, EventID, ICID.
(That is, where MAPTI takes an explicit pINTID, MAPI uses the EventID
as the pINTID.)

We didn't quite get this right.  In particular the error checks for
MAPI include "EventID does not specify a valid LPI identifier", which
is the same as MAPTI's error check for the pINTID field.  QEMU's code
skips the pINTID error check entirely in the MAPI case.

We can fix this bug and in the process simplify the code by switching
to the obvious implementation of setting pIntid = eventid early
if ignore_pInt is true.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

The GITS_TYPE_PHYSICAL define is the value we set the
GITS_TYPER.Physical field to -- this is 1 to indicate that we support
physical LPIs.  (Support for virtual LPIs is the GITS_TYPER.Virtual
field.) We also use this define as the *value* that we write into an
interrupt translation table entry's INTTYPE field, which should be 1
for a physical interrupt and 0 for a virtual interrupt.  Finally, we
use it as a *mask* when we read the interrupt translation table entry
INTTYPE field.

Untangle this confusion: define an ITE_INTTYPE_VIRTUAL and
ITE_INTTYPE_PHYSICAL to be the valid values of the ITE INTTYPE
field, and replace the ad-hoc collection of ITE_ENTRY_* defines with
use of the FIELD() macro to define the fields of an ITE and the
FIELD_EX64() and FIELD_DP64() macros to read and write them.
We use ITE in the new setup, rather than ITE_ENTRY, because
ITE stands for "Interrupt translation entry" and so the extra
"entry" would be redundant.

We take the opportunity to correct the name of the field that holds
the GICv4 'doorbell' interrupt ID (this is always the value 1023 in a
GICv3, which is why we were calling it the 'spurious' field).

The GITS_TYPE_PHYSICAL define is then used in only one place, where
we set the initial GITS_TYPER value.  Since GITS_TYPER.Physical is
essentially a boolean, hiding the '1' value behind a macro is more
confusing than helpful, so expand out the macro there and remove the
define entirely.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>