Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1612763186-18161-16-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-15-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Take the words from instruction memory and build a packet_t for TCG code
generation

The following operations are performed
    Convert the .new encoded offset to the register number of the producer
    Reorder the packet so .new producer is before consumer
    Apply constant extenders
    Separate subinsn's into two instructions
    Break compare-jumps into two instructions
    Create instructions for :endloop

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-14-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-13-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Declare bitfields within registers such as user status register (USR)

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-12-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

The insn_t and packet_t are the interface between instruction decoding and
TCG code generation

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-11-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Define types used in files imported from the Hexagon architecture library

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1612763186-18161-10-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

GDB register read and write routines

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1612763186-18161-9-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

The majority of helpers are generated.  Define the helper functions needed
then include the generated file

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1612763186-18161-8-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1612763186-18161-7-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Add hexagon to disas/meson.build
Add disas/hexagon.c
Add hexagon to include/disas/dis-asm.h

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1612763186-18161-6-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Add target state header, target definitions and initialization routines

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1612763186-18161-5-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Define EM_HEXAGON 164

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-4-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Gives an introduction and overview to the Hexagon target

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1612763186-18161-3-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Add Taylor Simpson as the Hexagon target maintainer

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-2-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201021045149.1582203-2-richard.henderson@linaro.org>

Plugin updates:

  - expose vdev name in PCI memory registration
  - new hwprofile plugin
  - bunch of style cleanups to contrib/plugins
  - fix call signature of inline instrumentation
  - re-factor the io_recompile code to push specialisation into hooks
  - add some acceptance tests for the plugins
  - clean-up and remove CF_NOCACHE handling from TCG
  - fix instrumentation of cpu_io_recompile sections
  - expand tests to check inline and cb count the same

# gpg: Signature made Thu 18 Feb 2021 08:24:57 GMT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-plugin-updates-180221-1: (23 commits)
  tests/acceptance: add a memory callback check
  tests/plugin: allow memory plugin to do both inline and callbacks
  tests/acceptance: add a new tests to detect counting errors
  accel/tcg: allow plugin instrumentation to be disable via cflags
  accel/tcg: remove CF_NOCACHE and special cases
  accel/tcg: re-factor non-RAM execution code
  accel/tcg: cache single instruction TB on pending replay exception
  accel/tcg: actually cache our partial icount TB
  tests/acceptance: add a new set of tests to exercise plugins
  tests/plugin: expand insn test to detect duplicate instructions
  target/sh4: Create superh_io_recompile_replay_branch
  target/mips: Create mips_io_recompile_replay_branch
  accel/tcg: Create io_recompile_replay_branch hook
  exec: Move TranslationBlock typedef to qemu/typedefs.h
  accel/tcg/plugin-gen: fix the call signature for inline callbacks
  contrib: Open brace '{' following struct go on the same line
  contrib: space required after that ','
  contrib: Add spaces around operator
  contrib: Fix some code style problems, ERROR: "foo * bar" should be "foo *bar"
  contrib: Don't use '#' flag of printf format
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

This test makes sure that the inline and callback based memory checks
count the same number of accesses.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210213130325.14781-24-alex.bennee@linaro.org>

This is going to be useful for acceptance tests that check both types
are being called the same number of times, especially when icount is
enabled.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210213130325.14781-23-alex.bennee@linaro.org>

The insn plugin has a simple heuristic to detect if an instruction is
detected running twice in a row. Check the plugin log after the run
and pass accordingly.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210213130325.14781-22-alex.bennee@linaro.org>

When icount is enabled and we recompile an MMIO access we end up
double counting the instruction execution. To avoid this we introduce
the CF_MEMI cflag which only allows memory instrumentation for the
next TB (which won't yet have been counted). As this is part of the
hashed compile flags we will only execute the generated TB while
coming out of a cpu_io_recompile.

While we are at it delete the old TODO. We might as well keep the
translation handy as it's likely you will repeatedly hit it on each
MMIO access.

Reported-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210213130325.14781-21-alex.bennee@linaro.org>

Now we no longer generate CF_NOCACHE blocks we can remove a bunch of
the special case handling for them. While we are at it we can remove
the unused tb->orig_tb field and save a few bytes on the TB structure.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210213130325.14781-20-alex.bennee@linaro.org>

There is no real need to use CF_NOCACHE here. As long as the TB isn't
linked to other TBs or included in the QHT or jump cache then it will
only get executed once.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210213130325.14781-19-alex.bennee@linaro.org>

Again there is no reason to jump through the nocache hoops to execute
a single instruction block. We do have to add an additional wrinkle to
the cpu_handle_interrupt case to ensure we let through a TB where we
have specifically disabled icount for the block.

As the last user of cpu_exec_nocache we can now remove the function.
Further clean-up will follow in subsequent patches.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210213130325.14781-18-alex.bennee@linaro.org>

When we exit a block under icount with instructions left to execute we
might need a shorter than normal block to take us to the next
deterministic event. Instead of creating a throwaway block on demand
we use the existing compile flags mechanism to ensure we fetch (or
compile and fetch) a block with exactly the number of instructions we
need.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210213130325.14781-17-alex.bennee@linaro.org>

This is just a simple test to count the instructions executed by a
kernel. However a later test will detect a failure condition when
icount is enabled.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210213130325.14781-16-alex.bennee@linaro.org>

A duplicate insn is one that is appears to be executed twice in a row.
This is currently possible due to -icount and cpu_io_recompile()
causing a re-translation of a block. On it's own this won't trigger
any tests though.

The heuristics that the plugin use can't deal with the x86 rep
instruction which (validly) will look like executing the same
instruction several times. To avoid problems later we tweak the rules
for x86 to run the "inline" version of the plugin. This also has the
advantage of increasing coverage of the plugin code (see bugfix in
previous commit).

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210213130325.14781-15-alex.bennee@linaro.org>

Move the code from accel/tcg/translate-all.c to target/sh4/cpu.c.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210208233906.479571-5-richard.henderson@linaro.org>
Message-Id: <20210213130325.14781-14-alex.bennee@linaro.org>

Move the code from accel/tcg/translate-all.c to target/mips/cpu.c.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210208233906.479571-4-richard.henderson@linaro.org>
Message-Id: <20210213130325.14781-13-alex.bennee@linaro.org>

Create a hook in which to split out the mips and
sh4 ifdefs from cpu_io_recompile.

[AJB: s/stoped/stopped/]

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210208233906.479571-3-richard.henderson@linaro.org>
Message-Id: <20210213130325.14781-12-alex.bennee@linaro.org>

This also means we don't need an extra declaration of
the structure in hw/core/cpu.h.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210208233906.479571-2-richard.henderson@linaro.org>
Message-Id: <20210213130325.14781-11-alex.bennee@linaro.org>

A recent change to the handling of constants in TCG changed the
pattern of ops emitted for a constant add. We no longer emit a mov and
the constant can be applied directly to the TCG_op_add arguments. This
was causing SEGVs when running the insn plugin with arg=inline. Fix
this by updating copy_add_i64 to do the right thing while also adding
a comment at the top of the append section as an aide memoir if
something like this happens again.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Emilio G. Cota <cota@braap.org>
Message-Id: <20210213130325.14781-10-alex.bennee@linaro.org>

I found some style problems whil check the code using checkpatch.pl.
This commit fixs the issue below:
ERROR: that open brace { should be on the previous line

Signed-off-by: zhouyang <zhouyang789@huawei.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210118031004.1662363-6-zhouyang789@huawei.com>
Message-Id: <20210213130325.14781-9-alex.bennee@linaro.org>

I am reading contrib related code and found some style problems while
check the code using checkpatch.pl. This commit fixs the issue below:
ERROR: space required after that ','

Signed-off-by: zhouyang <zhouyang789@huawei.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210118031004.1662363-5-zhouyang789@huawei.com>
Message-Id: <20210213130325.14781-8-alex.bennee@linaro.org>

I am reading contrib related code and found some style problems while
check the code using checkpatch.pl. This commit fixs the issue below:
ERROR: spaces required around that '*'

Signed-off-by: zhouyang <zhouyang789@huawei.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210118031004.1662363-4-zhouyang789@huawei.com>
Message-Id: <20210213130325.14781-7-alex.bennee@linaro.org>

I am reading contrib related code and found some style problems while
check the code using checkpatch.pl. This commit fixs the issue below:
ERROR: "foo * bar" should be "foo *bar"

Signed-off-by: zhouyang <zhouyang789@huawei.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210118031004.1662363-3-zhouyang789@huawei.com>
Message-Id: <20210213130325.14781-6-alex.bennee@linaro.org>

I am reading contrib related code and found some style problems while
check the code using checkpatch.pl. This commit fixs the misuse of
'#' flag of printf format

Signed-off-by: zhouyang <zhouyang789@huawei.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210118031004.1662363-2-zhouyang789@huawei.com>
Message-Id: <20210213130325.14781-5-alex.bennee@linaro.org>

This is a plugin intended to help with profiling access to various
bits of system hardware. It only really makes sense for system
emulation.

It takes advantage of the recently exposed helper API that allows us
to see the device name (memory region name) associated with a device.

You can specify arg=read or arg=write to limit the tracking to just
reads or writes (by default it does both).

The pattern option:

  -plugin ./tests/plugin/libhwprofile.so,arg=pattern

will allow you to see the access pattern to devices, eg:

  gic_cpu @ 0xffffffc010040000
    off:00000000, 8, 1, 8, 1
    off:00000000, 4, 1, 4, 1
    off:00000000, 2, 1, 2, 1
    off:00000000, 1, 1, 1, 1

The source option:

  -plugin ./tests/plugin/libhwprofile.so,arg=source

will track the virtual source address of the instruction making the
access:

  pl011 @ 0xffffffc010031000
    pc:ffffffc0104c785c, 1, 4, 0, 0
    pc:ffffffc0104c7898, 1, 4, 0, 0
    pc:ffffffc010512bcc, 2, 1867, 0, 0

You cannot mix source and pattern.

Finally the match option allow you to limit the tracking to just the
devices you care about.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20210213130325.14781-4-alex.bennee@linaro.org>

This may well end up being anonymous but it should always be unique.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Clement Deschamps <clement.deschamps@greensocs.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210213130325.14781-3-alex.bennee@linaro.org>

When viewing/debugging memory regions it is sometimes hard to figure
out which PCI device something belongs to. Make the names unique by
including the vdev name in the name string.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20210213130325.14781-2-alex.bennee@linaro.org>