The function get_fd extract context from the received MAD message and
uses it as a key to fetch the destination fd from the mapping table.
A context can be dgid in case of CM request message or comm_id in case
of CM SIDR response message.

When MAD message with a smaller size as expected for the message type
received we are hitting out-of-bounds where we are looking for the
context out of message boundaries.

Fix it by validating the message size.

Reported-by Sam Smith <sam.j.smith@oracle.com>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20190212112347.1605-1-yuval.shaia@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>

target-arm queue:
 * Add missing SVE-enabled check to ADDVL/ADDPL/RDVL
 * virt-acpi-build: use PCIE_MMCFG_BUS to retrieve end_bus_number
 * virt-acpi-build: Fix SMMUv3 GSIV values
 * Allow EL0 to write to arch timer registers, not just read them
 * bcm2836_control: Implement local timer

# gpg: Signature made Fri 15 Mar 2019 11:37:29 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20190315:
  target/arm: Check access permission to ADDVL/ADDPL/RDVL
  hw/arm/virt-acpi-build: use PCIE_MMCFG_BUS to retrieve end_bus_number
  target/arm: change arch timer registers access permission
  hw/arm/virt-acpi-build: Fix SMMUv3 GSIV values
  hw/intc/bcm2836_control: Implement local timer

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

These instructions do not trap when SVE is disabled in EL0,
causing them to be executed with wrong size information.

Signed-off-by: Amir Charif <amir.charif@cea.fr>
Message-id: 1552579248-31025-1-git-send-email-amir.charif@cea.fr
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added 'target/arm' prefix to subject]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

This is more proper to use PCIE_MMCFG_BUS to retrieve end_bus_number.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20190312074953.16671-1-richardw.yang@linux.intel.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Some generic arch timer registers are Config-RW in the EL0,
which means the EL0 exception level can have write permission
if it is appropriately configured.

When VM access registers, QEMU firstly checks whether they have RW
permission, then check whether it is appropriately configured.
If they are defined to read only in EL0, even though they have been
appropriately configured, they still do not have write permission.
So need to add the write permission according to ARMV8 spec when
define it.

Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Message-id: 1552395177-12608-1-git-send-email-gengdongjiu@huawei.com
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The GSIV numbers of the SPI based interrupts is not correct as
ARM_SPI_BASE was not added to the irqmap[VIRT_SMMU] value. So
this may collide with VIRTIO_MMIO irq window.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20190312091031.5185-1-eric.auger@redhat.com
Reviewed-by: Shannon Zhao <shannon.zhaosl@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The BCM2836 control logic module includes a simple
"local timer" which is a programmable down-counter that
can generates an interrupt. Implement this functionality.

Signed-off-by: Zoltán Baldaszti <bztemail@gmail.com>
[PMM: wrote commit message; wrapped long line; tweaked
 some comments to match the final version of the code]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

.gitignore updates for v4.0

# gpg: Signature made Thu 14 Mar 2019 15:04:29 GMT
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-pull-request:
  tests/.gitignore: ignore test-qapi-emit-events.[ch] for in-tree builds
  .gitignore: ignore docs/built created for in-tree builds
  maint: Ignore built elf2dmp

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Commit 5d75648b generates 'tests/test-qapi-emit-events.[ch]' but
did not ignore them for in-tree builds.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190314104622.101715-3-sgarzare@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Commit 1290e671 creates 'docs/built' for in-tree builds of
Sphinx manuals but did not ignore it.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190314104622.101715-2-sgarzare@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Commit 3fa2d384 added a binary 'elf2dmp' but did not ignore it
during an in-tree build.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190313144557.8845-1-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Final gitdm updates for 4.0

# gpg: Signature made Tue 12 Mar 2019 19:33:51 GMT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-gitdm-next-120319-1:
  contrib: gitdm: add a mapping for Janus Technologies
  contrib: gitdm: another IBM email
  contrib: gitdm: add more individual contributors
  contrib: gitdm: Update Wave Computing group
  contrib: gitdm: Update domain-map

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Final testing fixes for 4.0

  - various CI tweaks and fixes
  - fixes for some tcg tests
  - addition of system tcg tests

# gpg: Signature made Tue 12 Mar 2019 17:07:24 GMT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-for-4.0-120319-1: (26 commits)
  .travis.yml: add softmmu check-tcg tests
  .travis.yml: separate softfloat from check-tcg
  tests/tcg/arm: account for pauth randomness
  tests/tcg/i386: add memory test to exercise softmmu
  tests/tcg/i386: add system mode Hello World test
  tests/tcg: provide a minilib for system tests
  tests/tcg: enable cris base user-mode tests
  tests/tcg/cris: align mul operations
  tests/tcg/cris: comment out the ccs test
  tests/tcg: split cris tests into bare and libc directories
  tests/tcg/cris: cleanup sys.c
  tests/docker: add fedora-cris-cross compilers
  tests/tcg/arm: add ARMv6-M UNDEFINED 32-bit instruction test
  tests/tcg/xtensa: enable system tests
  tests/docker: add debian-xtensa-cross image
  tests/tcg/mips: fix hello-mips compilation
  tests/tcg: add gdb runner variant
  tests/tcg: split run-test into user and system variants
  tests/tcg: add QEMU_OPT option for test runner
  tests/tcg: enable tcg tests for softmmu
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

* ASAN fixes

# gpg: Signature made Tue 12 Mar 2019 14:35:59 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  test-migration: fix memory leak
  migration: fix memory leak
  test-bdrv-graph-mod: fix Error leak
  test-char: fix undefined behavior

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Pull request

 * Add 'drop-cache=on|off' option to file-posix.c.  The default is on.
   Disabling the option fixes a QEMU 3.0.0 performance regression when live
   migrating on the same host with cache.direct=off.

# gpg: Signature made Wed 13 Mar 2019 11:07:48 GMT
# gpg:                using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  file-posix: add drop-cache=on|off option

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Slirp updates

Daniel P. Berrangé (1):
  configure: remove slirp submodule support that doesn't exist yet

Marc-André Lureau (1):
  slirp: remove empty state.h

# gpg: Signature made Wed 13 Mar 2019 21:18:35 GMT
# gpg:                using RSA key E61DBB15D4172BDEC97E92D9DB550E89F0FA54F3
# gpg: Good signature from "Samuel Thibault <samuel.thibault@aquilenet.fr>" [unknown]
# gpg:                 aka "Samuel Thibault <sthibault@debian.org>" [marginal]
# gpg:                 aka "Samuel Thibault <samuel.thibault@gnu.org>" [unknown]
# gpg:                 aka "Samuel Thibault <samuel.thibault@inria.fr>" [marginal]
# gpg:                 aka "Samuel Thibault <samuel.thibault@labri.fr>" [marginal]
# gpg:                 aka "Samuel Thibault <samuel.thibault@ens-lyon.org>" [marginal]
# gpg:                 aka "Samuel Thibault <samuel.thibault@u-bordeaux.fr>" [unknown]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 900C B024 B679 31D4 0F82  304B D017 8C76 7D06 9EE6
#      Subkey fingerprint: E61D BB15 D417 2BDE C97E  92D9 DB55 0E89 F0FA 54F3

* remotes/thibault/tags/samuel-thibault:
  configure: remove slirp submodule support that doesn't exist yet
  slirp: remove empty state.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/riscv: Convert to decodetree

Bastian: this patchset converts the RISC-V decoder to decodetree in four major steps:

1) Convert 32-bit instructions to decodetree [Patch 1-15]:
    Many of the gen_* functions are called by the decode functions for 16-bit
    and 32-bit functions. If we move translation code from the gen_*
    functions to the generated trans_* functions of decode-tree, we get a lot of
    duplication. Therefore, we mostly generate calls to the old gen_* function
    which are properly replaced after step 2).

    Each of the trans_ functions are grouped into files corresponding to their
    ISA extension, e.g. addi which is in RV32I is translated in the file
    'trans_rvi.inc.c'.

2) Convert 16-bit instructions to decodetree [Patch 16-18]:
    All 16 bit instructions have a direct mapping to a 32 bit instruction. Thus,
    we convert the arguments in the 16 bit trans_ function to the arguments of
    the corresponding 32 bit instruction and call the 32 bit trans_ function.

3) Remove old manual decoding in gen_* function [Patch 19-29]:
    this move all manual translation code into the trans_* instructions of
    decode tree, such that we can remove the old decode_* functions.

Palmer: This, with some additional cleanup patches, passed Alistar's
testing on rv32 and rv64 as well as my testing on rv64, so I think it's
good to go.  I've run my standard test against this exact tag.

I still don't have a Mac to try this on, sorry!

# gpg: Signature made Wed 13 Mar 2019 13:44:49 GMT
# gpg:                using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg:                issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg:                 aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88  6DF8 EF4C A150 2CCB AB41

* remotes/palmer/tags/riscv-for-master-4.0-sf4: (29 commits)
  target/riscv: Remove decode_RV32_64G()
  target/riscv: Remove gen_system()
  target/riscv: Rename trans_arith to gen_arith
  target/riscv: Remove manual decoding of RV32/64M insn
  target/riscv: Remove shift and slt insn manual decoding
  target/riscv: make ADD/SUB/OR/XOR/AND insn use arg lists
  target/riscv: Move gen_arith_imm() decoding into trans_* functions
  target/riscv: Remove manual decoding from gen_store()
  target/riscv: Remove manual decoding from gen_load()
  target/riscv: Remove manual decoding from gen_branch()
  target/riscv: Remove gen_jalr()
  target/riscv: Convert quadrant 2 of RVXC insns to decodetree
  target/riscv: Convert quadrant 1 of RVXC insns to decodetree
  target/riscv: Convert quadrant 0 of RVXC insns to decodetree
  target/riscv: Convert RV priv insns to decodetree
  target/riscv: Convert RV64D insns to decodetree
  target/riscv: Convert RV32D insns to decodetree
  target/riscv: Convert RV64F insns to decodetree
  target/riscv: Convert RV32F insns to decodetree
  target/riscv: Convert RV64A insns to decodetree
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The slirp code is not yet split off into a separate repository, so
configuring QEMU to use slirp as a submodule is premature. This
causes the non-existant "slirp" to be requested from git when syncing
submodules. This in turn appears to be cause of non-deterministic
failures some developers are seeing with QEMU's submodule sync process.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190313173157.30504-1-berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190313173949.2369-1-marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>

ui: better unicode support for curses, v2.

# gpg: Signature made Wed 13 Mar 2019 07:29:44 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20190313-pull-request:
  curses: add option to specify VGA font encoding
  iconv: detect and make curses depend on it

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

pci, pc, virtio: features, fixes, cleanups

intel-iommu scalable option
pcie acs emulation
beginning for vhost-user-blk reconnect and of vhost-user backend work
misc fixes and cleanups

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 13 Mar 2019 02:52:02 GMT
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (26 commits)
  i386, acpi: check acpi_memory_hotplug capacity in pre_plug
  gen_pcie_root_port: Add ACS (Access Control Services) capability
  pcie: Add a simple PCIe ACS (Access Control Services) helper function
  vhost-user-blk: Add support to get/set inflight buffer
  libvhost-user: Support tracking inflight I/O in shared memory
  libvhost-user: Introduce vu_queue_map_desc()
  libvhost-user: Remove unnecessary FD flag check for event file descriptors
  vhost-user: Support transferring inflight buffer between qemu and backend
  nvdimm: use NVDIMM_ACPI_IO_LEN for the proper IO size
  nvdimm: use *function* directly instead of allocating it again
  nvdimm: fix typo in nvdimm_build_nvdimm_devices argument
  intel_iommu: add scalable-mode option to make scalable mode work
  intel_iommu: add 256 bits qi_desc support
  intel_iommu: scalable mode emulation
  libvhost-user: add vu_queue_unpop()
  libvhost-user-glib: export vug_source_new()
  vhost-user: split vhost_user_read()
  vhost-user: wrap some read/write with retry handling
  libvhost-user: exit by default on VHOST_USER_NONE
  vhost-user: simplify vhost_user_init/vhost_user_cleanup
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Pull request

# gpg: Signature made Tue 12 Mar 2019 20:23:08 GMT
# gpg:                using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* remotes/jnsnow/tags/bitmaps-pull-request: (22 commits)
  tests/qemu-iotests: add bitmap resize test 246
  block/qcow2-bitmap: Allow resizes with persistent bitmaps
  block/qcow2-bitmap: Don't check size for IN_USE bitmap
  docs/interop/qcow2: Improve bitmap flag in_use specification
  bitmaps: Fix typo in function name
  block/dirty-bitmaps: implement inconsistent bit
  block/dirty-bitmaps: disallow busy bitmaps as merge source
  block/dirty-bitmaps: prohibit removing readonly bitmaps
  block/dirty-bitmaps: prohibit readonly bitmaps for backups
  block/dirty-bitmaps: add block_dirty_bitmap_check function
  block/dirty-bitmap: add inconsistent status
  block/dirty-bitmaps: add inconsistent bit
  iotests: add busy/recording bit test to 124
  blockdev: remove unused paio parameter documentation
  block/dirty-bitmaps: move comment block
  block/dirty-bitmaps: unify qmp_locked and user_locked calls
  block/dirty-bitmap: explicitly lock bitmaps with successors
  nbd: change error checking order for bitmaps
  block/dirty-bitmap: change semantics of enabled predicate
  block/dirty-bitmap: remove set/reset assertions against enabled bit
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	tests/qemu-iotests/group

Block layer patches:

- file-posix: Make auto-read-only dynamic
- Add x-blockdev-reopen QMP command
- Finalize block-latency-histogram QMP command
- gluster: Build fixes for newer lib version

# gpg: Signature made Tue 12 Mar 2019 19:30:31 GMT
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (28 commits)
  qemu-iotests: Test the x-blockdev-reopen QMP command
  block: Add an 'x-blockdev-reopen' QMP command
  block: Remove the AioContext parameter from bdrv_reopen_multiple()
  block: Add bdrv_reset_options_allowed()
  block: Add a 'mutable_opts' field to BlockDriver
  block: Allow changing the backing file on reopen
  block: Allow omitting the 'backing' option in certain cases
  block: Handle child references in bdrv_reopen_queue()
  block: Add 'keep_old_opts' parameter to bdrv_reopen_queue()
  block: Freeze the backing chain for the duration of the stream job
  block: Freeze the backing chain for the duration of the mirror job
  block: Freeze the backing chain for the duration of the commit job
  block: Allow freezing BdrvChild links
  nvme: fix write zeroes offset and count
  file-posix: Make auto-read-only dynamic
  file-posix: Prepare permission code for fd switching
  file-posix: Lock new fd in raw_reopen_prepare()
  file-posix: Store BDRVRawState.reopen_state during reopen
  file-posix: Factor out raw_reconfigure_getfd()
  file-posix: Fix bdrv_open_flags() for snapshot=on
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Break out documentation to docs/devel/.
Add support for pattern groups.
Other misc cleanups for multiple decode functions.

# gpg: Signature made Tue 12 Mar 2019 16:59:37 GMT
# gpg:                using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-dt-20190312:
  decodetree: Properly diagnose fields overflowing an insn
  decodetree: Prefix extract function names with decode_function
  decodetree: Allow +- to begin a number initializing a field
  decodetree: Produce clean output for an empty input file
  decodetree: Add --static-decode option
  test/decode: Add tests for PatternGroups
  decodetree: Allow grouping of overlapping patterns
  decodetree: Do not unconditionaly return from Pattern.output_code
  decodetree: Ensure build_tree does not include values outside insnmask
  decodetree: Document the usefulness of argument sets
  decodetree: Move documentation to docs/devel/decodetree.rst
  MAINTAINERS: Add scripts/decodetree.py to the TCG section

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Commit dd577a26 ("block/file-posix:
implement bdrv_co_invalidate_cache() on Linux") introduced page cache
invalidation so that cache.direct=off live migration is safe on Linux.

The invalidation takes a significant amount of time when the file is
large and present in the page cache.  Normally this is not the case for
cross-host live migration but it can happen when migrating between QEMU
processes on the same host.

On same-host migration we don't need to invalidate pages for correctness
anyway, so an option to skip page cache invalidation is useful.  I
investigated optimizing invalidation and detecting same-host migration,
but both are hard to achieve so a user-visible option will suffice.

As a bonus this option means that the cache invalidation feature will
now be detectable by libvirt via QMP schema introspection.

Suggested-by: Neil Skrypuch <neil@tembosocial.com>
Tested-by: Neil Skrypuch <neil@tembosocial.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190307164941.3322-1-stefanha@redhat.com
Message-Id: <20190307164941.3322-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

decodetree handles all instructions now so the fallback is not necessary
anymore.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>

with all 16 bit insns moved to decodetree no path is falling back to
gen_system(), so we can remove it.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>

manual decoding in gen_arith() is not necessary with decodetree. For now
the function is called trans_arith as the original gen_arith still
exists. The former will be renamed to gen_arith as soon as the old
gen_arith can be removed.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>

gen_arith_imm() does a lot of decoding manually, which was hard to read
in case of the shift instructions and is not necessary anymore with
decodetree.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>

With decodetree we don't need to convert RISC-V opcodes into to MemOps
as the old gen_store() did.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>

With decodetree we don't need to convert RISC-V opcodes into to MemOps
as the old gen_load() did.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>

We now utilizes argument-sets of decodetree such that no manual
decoding is necessary.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>

trans_jalr() is the only caller, so move the code into trans_jalr().

Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>

Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>