hw/9pfs/Makefile.objs uses CONFIG_VIRTIO_9P to guard the definition for
FileOperations structs, while fsdev/Makefile.objs uses CONFIG_VIRTIO
to guard the use.  Mismatch causes linking to fail when CONFIG_VIRTIO
is set but CONFIG_VIRTIO_9P is not.

Fix it and use if/else to clarify that the two lines are for opposite
conditions.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: b5dfdb08
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>

hw/display: misc fixes

# gpg: Signature made Tue 21 Aug 2018 09:16:01 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20180821-pull-request:
  hw/pci-host/bonito: Move away from old_mmio accessors
  hw/display/vga-isa-mm: Convert away from old_mmio
  qxl: drop unused generation variable
  hw/display/ramfb: Compile the ramfb code only when CONFIG_FW_CFG_DMA is set

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ppc patch queue 2018-08-21

Here's my first ppc & spapr pull request for qemu-3.1.  This contains
a bunch of things that have accumulated while 3.0 was in freeze.
Highlights are:
    * SLOF firmware update
    * A number of floating point cleanups from Richard Henderson and
      Yasmin Beatriz
    * A new model for assigning irq numbers on spapr, this is an
      important preliminary step towards implementing the POWER9
      "XIVE" interrupt controller

# gpg: Signature made Tue 21 Aug 2018 05:32:44 BST
# gpg:                using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-3.1-20180821: (26 commits)
  ppc: add DBCR based debugging
  spapr_pci: factorize the use of SPAPR_MACHINE_GET_CLASS()
  mac_newworld: don't use legacy fw_cfg_init_mem() function
  mac_oldworld: don't use legacy fw_cfg_init_mem() function
  40p: don't use legacy fw_cfg_init_mem() function
  qemu-doc: mark ppc/prep machine as deprecated
  hw/ppc: deprecate the machine type 'prep', replaced by '40p'
  spapr: introduce a IRQ controller backend to the machine
  hw/ppc/ppc405_uc: Convert away from old_mmio
  hw/ppc/ppc_boards: Don't use old_mmio for ref405ep_fpga
  hw/ppc/prep: Remove ifdeffed-out stub of XCSR code
  spapr: introduce a fixed IRQ number space
  spapr: Add a pseries-3.1 machine type
  target/ppc: simplify bcdadd/sub functions
  xics: don't include "target/ppc/cpu-qom.h" in "hw/ppc/xics.h"
  vfio/spapr: Allow backing bigger guest IOMMU pages with smaller physical pages
  target/ppc: bcdsub fix sign when result is zero
  target/ppc: Use non-arithmetic conversions for fp load/store
  target/ppc: Honor fpscr_ze semantics and tidy fre, fresqrt
  target/ppc: Tidy helper_fsqrt
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user fixes:
- netlink fixes (add missing types, fix MSG_TRUNC)
- sh4 fix (tcg state)
- sparc32plus fix (truncate address space to 32bit)
- add x86_64 binfmt data

# gpg: Signature made Mon 20 Aug 2018 21:24:40 BST
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-3.1-pull-request:
  linux-user: add QEMU_IFLA_INFO_KIND nested type for tun
  linux-user: update netlink route types
  linux-user: introduce QEMU_RTA_* to use with rtattr_type_t
  linux-user: fix recvmsg()/recvfrom() with netlink and MSG_TRUNC
  sh4: fix use_icount with linux-user
  linux-user: fix 32bit g2h()/h2g()
  qemu-binfmt-conf.sh: add x86_64 target

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

pc: fixes

This includes nvdimm persistence fixes queued before the release.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 20 Aug 2018 11:38:11 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  migration/ram: ensure write persistence on loading all data to PMEM.
  migration/ram: Add check and info message to nvdimm post copy.
  mem/nvdimm: ensure write persistence to PMEM in label emulation
  hostmem-file: add the 'pmem' option
  configure: add libpmem support
  memory, exec: switch file ram allocation functions to 'flags' parameters
  memory, exec: Expose all memory block related flags.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qemu-sparc.for-upstream queue

# gpg: Signature made Mon 20 Aug 2018 19:38:04 BST
# gpg:                using RSA key 5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc.for-upstream-20180820:
  sun4m: don't use legacy fw_cfg_init_mem() function
  sun4u: ensure kernel_top is always initialised

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Move away from the old_mmio MemoryRegion accessors in the
bonito pci controller.

This device is used only in the MIPS "fulong2e" machine.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180802155147.1863-3-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Convert the vga-isa-mm device away from the old_mmio
MemoryRegion accessors.

This device is only used by the MIPS 'jazz' boards
"magnum" and "pica61".

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 20180802155147.1863-2-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180810132236.25908-1-kraxel@redhat.com

According to the ramfb_setup() function, the ramfb device needs fw_cfg
with DMA, so we should also only compile and link it into those targets
which support it, to avoid that the device shows up on systems where it
can not be used at all (e.g. s390x).

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1534786083-26559-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Add support for DBCR (debug control register) based debugging as used on
BookE ppc. So far supports only branch and single-step events, but these are
the important ones. GDB in Linux guest can now do single-stepping.

Signed-off-by: Roman Kapl <rka@sysgo.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

It should save us some CPU cycles as these routines perform a lot of
checks.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Instead initialise the device via qdev to allow us to set device properties
directly as required.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Instead initialise the device via qdev to allow us to set device properties
directly as required.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Instead initialise the device via qdev to allow us to set device properties
directly as required.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

40p machine type should be used instead.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

- prep machine is a fictional machine, so has no specifications. Which
  devices can be changed/added/removed without impact? Are interrupts
  correctly mapped?
- prep firmware (OHW) has support only for IDE drives (no SCSI).
  Booting from IDE has been broken approximatively 3 years ago, and nobody complained.
- OHW is limited on IDE boot to a specific set of OS loaders.
  These operating systems are of the 2004 time frame.
- OHW can use -kernel. Linux kernel freezes a long time after PS/2 mouse
  detection, and then screen becomes garbage. This was already broken in
  QEMU v2.7, 2 years ago, and nobody complained.

On the other side:
- 40p is a real machine, so emulation can be checked against
  hardware specifications
- OpenBIOS has support for SCSI block devices, including 40p LSI adapter
- OpenBIOS can start mostly all Linux kernels (including recent ones)
  and recent operating system (like NetBSD 7.1.2)

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
[dwg: Drop prep from boot-serial test to avoid deprecation warnings]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

This proposal moves all the related IRQ routines of the sPAPR machine
behind a sPAPR IRQ backend interface 'spapr_irq' to prepare for future
changes. First of which will be to increase the size of the IRQ number
space, then, will follow a new backend for the POWER9 XIVE IRQ controller.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Convert the devices in ppc405_uc away from using the old_mmio
MemoryRegion accessors:

 * opba's 32-bit and 16-bit accessors were just calling the
   8-bit accessors and assembling a big-endian order number,
   which we can do by setting the .impl.max_access_size to 1
   and the endianness to DEVICE_BIG_ENDIAN, and letting the
   core memory code do the assembly
 * ppc405_gpio's accessors were all just stubs
 * ppc4xx_gpt's 8-bit and 16-bit accessors were treating the
   access as invalid, which we can do by setting the
   .valid.min_access_size and .valid.max_access_size fields

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Switch the ref405ep_fpga device away from using the old_mmio
MemoryRegion accessors.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

The prep machine has some code which is stubs of accessors
for XCSR registers. This has been disabled via #if 0
since commit b6b8bd18 in 2004, and doesn't have any
actual interesting content. It also uses the deprecated
old_mmio accessor functions. Remove it entirely.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

This proposal introduces a new IRQ number space layout using static
numbers for all devices, depending on a device index, and a bitmap
allocator for the MSI IRQ numbers which are negotiated by the guest at
runtime.

As the VIO device model does not have a device index but a "reg"
property, we introduce a formula to compute an IRQ number from a "reg"
value. It should minimize most of the collisions.

The previous layout is kept in pre-3.1 machines raising the
'legacy_irq_allocation' machine class flag.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

After solving a corner case in bcdsub, this patch simplifies the logic
of both bcdadd/sub instructions by removing some unnecessary local flags.
This commit also rearranges some if-else conditions in bcdadd to make it
easier to read.

Signed-off-by: Yasmin Beatriz <yasmins@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

The last user of the PowerPCCPU typedef in "hw/ppc/xics.h" vanished with
commit b1fd36c3. It isn't necessary to
include "target/ppc/cpu-qom.h" there anymore.

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

At the moment the PPC64/pseries guest only supports 4K/64K/16M IOMMU
pages and POWER8 CPU supports the exact same set of page size so
so far things worked fine.

However POWER9 supports different set of sizes - 4K/64K/2M/1G and
the last two - 2M and 1G - are not even allowed in the paravirt interface
(RTAS DDW) so we always end up using 64K IOMMU pages, although we could
back guest's 16MB IOMMU pages with 2MB pages on the host.

This stores the supported host IOMMU page sizes in VFIOContainer and uses
this later when creating a new DMA window. This uses the system page size
(64k normally, 2M/16M/1G if hugepages used) as the upper limit of
the IOMMU pagesize.

This changes the type of @pagesize to uint64_t as this is what
memory_region_iommu_get_min_page_size() returns and clz64() takes.

There should be no behavioral changes on platforms other than pseries.
The guest will keep using the IOMMU page size selected by the PHB pagesize
property as this only changes the underlying hardware TCE table
granularity.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

When the result of bcdsub is equal to zero, the result sign may be
set to negative in some cases, and this does not follow the Power ISA
specifications as to decimal integer arithmetic instructions.

Signed-off-by: Yasmin Beatriz <yasmins@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Memory operations have no side effects on fp state.
The use of a "real" conversions between float64 and float32
would raise exceptions for SNaN and out-of-range inputs.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Divide by zero, exception taken, leaves the destination register
unmodified.  Therefore we must raise the exception before returning
from the respective helpers.

>From helper_fre, divide by zero exception not taken, return the
documented +/- 0.5.

At the same time, tidy the invalid exception checking so that we
rely on softfloat for initial argument validation, and select the
kind of invalid operand exception only when we know we must.

At the same time, pass and return float64 values directly rather
than bounce through the CPU_DoubleU union.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Tidy the invalid exception checking so that we rely on softfloat for
initial argument validation, and select the kind of invalid operand
exception only when we know we must.  Pass and return float64 values
directly rather than bounce through the CPU_DoubleU union.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Tidy the invalid exception checking so that we rely on softfloat for
initial argument validation, and select the kind of invalid operand
exception only when we know we must.  Pass and return float64 values
directly rather than bounce through the CPU_DoubleU union.

Note that because we know float_flag_invalid was set, we do not have
to re-check the signs of the infinities.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Tidy the invalid exception checking so that we rely on softfloat for
initial argument validation, and select the kind of invalid operand
exception only when we know we must.  Pass and return float64 values
directly rather than bounce through the CPU_DoubleU union.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Divide by zero, exception taken, leaves the destination register
unmodified.  Therefore we must raise the exception before returning
from helper_fdiv.  Move the check from do_float_check_status into
helper_fdiv.

At the same time, tidy the invalid exception checking so that we
rely on softfloat for initial argument validation, and select the
kind of invalid operand exception only when we know we must.

At the same time, pass and return float64 values directly rather
than bounce through the CPU_DoubleU union.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

While just setting the MSR bits is sufficient, we can tidy
the helper code by extracting the MSR test to a helper and
then forcing it true for user-only.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

This includes gcc8.1 fixes and the image is compiled using gcc 8.1 as well.

The full list of changes is:
  > Fix bad assembler statements for compiling with gcc 8.1 / as 2.30
  > libelf: Add REL32 to the list of ignored relocations

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

VMStateDescription vmstate_spapr_cpu_state was added by commit
b9402026 (spapr_cpu_core: migrate per-CPU data) to migrate per-CPU
data with the required vmstate registration and unregistration calls.
However the unregistration is being done only from vcpu creation error path
and not from CPU delete path.

This causes migration to fail with the following error if migration is
attempted after a CPU unplug like this:
Unknown savevm section or instance 'spapr_cpu' 16
Additionally this leaves the source VM unresponsive after migration failure.

Fix this by ensuring the vmstate_unregister happens during CPU removal.
Fixing this becomes easier when vmstate (un)registration calls are moved to
vcpu (un)realize functions which is what this patch does.

Fixes: https://bugs.launchpad.net/qemu/+bug/1785972


Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180820171557.7734-5-laurent@vivier.eu>

Add RTA_PREF and RTA_CACHEINFO.

Fix following errors when we start gedit:

  Unknown host RTA type: 12
  Unknown host RTA type: 20

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180820171557.7734-4-laurent@vivier.eu>

Following commit will introduce RTA_PREF that appears only with
kernel v4.1. To avoid to manage a specific case for it, this patch
introduces the full list of rtattr_type_t prefixed with QEMU_ (as we
did for IFLA values)

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180820171557.7734-3-laurent@vivier.eu>
[lv: added more RTA_* from linux v4.18]

If recvmsg()/recvfrom() are used with the MSG_TRUNC flag, they return the
real length even if it was longer than the passed buffer.
So when we translate the buffer we must check we don't go beyond the
end of the buffer.

Bug: https://github.com/vivier/qemu-m68k/issues/33


Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180820171557.7734-2-laurent@vivier.eu>