qsp_report() takes an fprintf()-like callback and a FILE * to pass to
it.

Its only caller hmp_sync_profile() passes monitor_fprintf() and the
current monitor cast to FILE *.  monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf().  The
type-punning is ugly.

Drop the callback, and call qemu_printf() instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-7-armbru@redhat.com>

dump_drift_info() takes an fprintf()-like callback and a FILE * to pass
to it.

Its only caller hmp_info_jit() passes monitor_fprintf() and a Monitor
* cast to FILE *.  monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().  The type-punning is ugly.

Drop the callback, and call qemu_printf() instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-6-armbru@redhat.com>

dump_exec_info() takes an fprintf()-like callback and a FILE * to pass
to it.

Its only caller hmp_info_jit() passes monitor_fprintf() and the
current monitor cast to FILE *.  monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf().  The
type-punning is ugly.

Drop the callback, and call qemu_printf() instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-5-armbru@redhat.com>

dump_opcount_info() takes an fprintf()-like callback and a FILE * to
pass to it.

Its only caller hmp_info_opcount() passes monitor_fprintf() and the
current monitor cast to FILE *.  monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf().  The
type-punning is ugly.

Drop the callback, and call qemu_printf() instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-4-armbru@redhat.com>

st_print_trace_file_status() takes an fprintf()-like callback and a
FILE * to pass to it.

Its only caller hmp_trace_file() passes monitor_fprintf() and the
current monitor cast to FILE *.  monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf().  The
type-punning is ugly.

Drop the callback, and call qemu_printf() instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-3-armbru@redhat.com>

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-2-armbru@redhat.com>

Commit a95db58f added monitor_vfprintf() as an error_printf()
generalized from stderr to arbitrary streams, then used it wrapped in
helper out_printf() to print -device/device_add help to stdout.  Use
qemu_printf() instead, and delete monitor_vfprintf() and out_printf().

Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417190641.26814-16-armbru@redhat.com>

char_pty_open() prints a "char device redirected to PTY_NAME (label
LABEL)" message to the current monitor or else to stderr.  This is not
an error, so it shouldn't go to stderr.  Print it to stdout instead.

Why is it even printed?  No other ChardevClass::open() prints anything
on success.  It's because you need to know PTY_NAME to actually use
this char device, e.g. like e.g. "socat STDIO,cfmakeraw FILE:PTY_NAME"
to use the monitor's readline interface.  You can get PTY_NAME with
"info chardev" (a.k.a. query-chardev for QMP), but only if you already
have a monitor.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417190641.26814-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

Command line help explicitly requested by the user should be printed
to stdout, not stderr.  We do elsewhere.  Adjust -chardev to match:
use qemu_printf() instead of error_printf().  Plain printf() would be
wrong because we need to print to the current monitor for "chardev-add
help".

Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190417190641.26814-14-armbru@redhat.com>

Command line help explicitly requested by the user should be printed
to stdout, not stderr.  We do elsewhere.  Adjust -drive to match: use
qemu_printf() instead of error_printf().  Plain printf() would be
wrong because we need to print to the current monitor for "drive_add
... format=help".

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190417190641.26814-13-armbru@redhat.com>

We commonly want to print to the current monitor if we have one, else
to stdout/stderr.  For stderr, have error_printf().  For stdout, all
we have is monitor_vfprintf(), which is rather unwieldy.  We often
print to stderr just because error_printf() is easier.

New qemu_printf() and qemu_vprintf() do exactly what's needed.  The
next commits will put them to use.

Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417190641.26814-12-armbru@redhat.com>

printf() & friends return the number of characters written on success,
negative value on error.

monitor_printf(), monitor_vfprintf(), monitor_vprintf(),
error_printf(), error_printf_unless_qmp(), error_vprintf(), and
error_vprintf_unless_qmp() return void.  Some of them carry a TODO
comment asking for int instead.

Improve them to return int like printf() does.

This makes our use of monitor_printf() as fprintf_function slightly
less dirty: the function cast no longer adds a return value that isn't
there.  It still changes a parameter's pointer type.  That will be
addressed in a future commit.

monitor_vfprintf() always returns zero.  Improve it to return the
proper value.

Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417190641.26814-11-armbru@redhat.com>

Command line help help explicitly requested by the user should be
printed to stdout, not stderr.  We do elsewhere.  Adjust -machine
$TYPE,help and -accel help to match: use printf() instead of
error_printf().

Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20190417190641.26814-10-armbru@redhat.com>

kvm_s390_mem_op() can fail in two ways: when !cap_mem_op, it returns
-ENOSYS, and when kvm_vcpu_ioctl() fails, it returns -errno set by
ioctl().  Its caller s390_cpu_virt_mem_rw() recovers from both
failures.

kvm_s390_mem_op() prints "KVM_S390_MEM_OP failed" with error_printf()
in the latter failure mode.  Since this is obviously a warning, use
warn_report().

Perhaps the reporting should be left to the caller.  It could warn on
failure other than -ENOSYS.

Cc: Thomas Huth <thuth@redhat.com>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190417190641.26814-9-armbru@redhat.com>

Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417190641.26814-8-armbru@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417190641.26814-7-armbru@redhat.com>

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20190417190641.26814-6-armbru@redhat.com>

Cc: Paul Burton <pburton@wavecomp.com>
Cc: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190417190641.26814-5-armbru@redhat.com>

load_fit() reports errors with error_printf() instead of
error_report().  Worse, it even reports errors it actually recovers
from, in fit_cfg_compatible() and fit_load_fdt().  Messed up in
initial commit 51b58561.

Convert the helper functions for load_fit() to Error.  Make sure each
failure path sets an error.

Fix fit_cfg_compatible() and fit_load_fdt() not to report errors they
actually recover from.

Convert load_fit() to error_report().

Cc: Paul Burton <pburton@wavecomp.com>
Cc: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190417190641.26814-4-armbru@redhat.com>

Callbacks ssh_co_readv(), ssh_co_writev(), ssh_co_flush() report
errors to the user with error_printf().  They shouldn't, it's their
caller's job.  Replace by a suitable trace point.  While there, drop
the unreachable !s->sftp case.

Perhaps we should convert this part of the block driver interface to
Error, so block drivers can pass more detail to their callers.  Not
today.

Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190417190641.26814-3-armbru@redhat.com>

error_exit() uses low-level error_printf() to report errors.
Modernize it to use error_vreport().

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190417190641.26814-2-armbru@redhat.com>

It would be nice to have Error object not freed away when debugging a
coredump.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190415142519.73060-1-vsementsov@virtuozzo.com>
[error_printf_unless_qmp() replaced by error_printf()]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Before the from qerror_report() to error_setg(), hints looked like
this:

    qerror_report(QERR_MACRO, ... arguments ...);
    error_printf_unless_qmp(... hint ...);

error_printf_unless_qmp() made perfect sense: it printed exactly when
qerror_report() did.

After the conversion to error_setg():

    error_setg(errp, QERR_MACRO, ... arguments ...);
    error_printf_unless_qmp(... hint ...);

The "unless QMP part" still made some sense; in QMP context, the
caller generally uses the error as QMP response instead of printing
it.

However, everything else is wrong.  If the caller handles the error,
the hint gets printed anyway (unless QMP).  If the caller reports the
error, the hint gets printed *before* the report (unless QMP) or not
at all (if QMP).

Commit 50b7b000 fixed this by making hints a member of Error.  It
kept printing hints with error_printf_unless_qmp():

     void error_report_err(Error *err)
     {
	 error_report("%s", error_get_pretty(err));
    +    if (err->hint) {
    +        error_printf_unless_qmp("%s\n", err->hint->str);
    +    }
	 error_free(err);
     }

This is wrong.  We should (and now can) print the hint exactly when we
print the error.

The mistake has since been copied to warn_report_err() in commit
e43ead1d.

Fix both to use error_printf().

Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190416153850.5186-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[Commit message tweaked]

This commit adds a error_init() helper which calls
g_log_set_default_handler() so that glib logs (g_log, g_warning, ...)
are handled similarly to other QEMU logs. This means they will get a
timestamp if timestamps are enabled, and they will go through the
HMP monitor if one is configured.

This commit also adds a call to error_init() to the binaries
installed by QEMU. Since error_init() also calls error_set_progname(),
this means that *-linux-user, *-bsd-user and qemu-pr-helper messages
output with error_report, info_report, ... will slightly change: they
will be prefixed by the binary name.

glib debug messages are enabled through G_MESSAGES_DEBUG similarly to
the glib default log handler.

At the moment, this change will mostly impact SPICE logging if your
spice version is >= 0.14.1. With older spice versions, this is not going
to work as expected, but will not have any ill effect, so this call is
not conditional on the SPICE version.

Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190131164614.19209-3-cfergeau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qemu-io reimplements itself what
error_get_progname()/error_set_progname() already does.
This commit switches it to use this API from qemu-error.h

Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190131164614.19209-2-cfergeau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The ObjectInfo struct has a variable length array containing the UTF-16
encoded filename. The number of characters of trailing data is given by
the 'length' field in the struct and this must be validated against the
size of the data packet received from the guest.

Since the data is UTF-16, we must convert the byte count we have to a
character count before validating. This must take care to truncate if
a malicious guest sent an odd number of bytes.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Block layer patches:

- qcow2: Fix potential corruption for preallocated resize with external data file

# gpg: Signature made Tue 16 Apr 2019 15:23:35 BST
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  qcow2: Fix preallocation bdrv_pwrite to wrong file

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

With an external data file, preallocate_co() must write the final byte
to the external data file, not to the qcow2 image file.

This is harmless for preallocation of newly created images (only the
qcow2 file size is increased to the virtual disk size while it should be
much smaller), but with preallocated resize, it could in theory cause
visible corruption if the metadata of the image is larger than the data
(e.g. lots of bitmaps).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

Commit 767abe7f ("chardev: forbid 'wait' option with client sockets")
is a bit too strict. Current libvirt always set wait=false, and will
thus fail to add client chardev.

Make the code more permissive, allowing wait=false with client socket
chardevs. Deprecate usage of 'wait' with client sockets.

Fixes: 767abe7f
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190415163337.2795-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Slirp updates

Dr. David Alan Gilbert (1):
  slirp: Gcc 9 -O3 fix

# gpg: Signature made Mon 15 Apr 2019 19:05:39 BST
# gpg:                using RSA key E61DBB15D4172BDEC97E92D9DB550E89F0FA54F3
# gpg: Good signature from "Samuel Thibault <samuel.thibault@aquilenet.fr>" [unknown]
# gpg:                 aka "Samuel Thibault <sthibault@debian.org>" [marginal]
# gpg:                 aka "Samuel Thibault <samuel.thibault@gnu.org>" [unknown]
# gpg:                 aka "Samuel Thibault <samuel.thibault@inria.fr>" [marginal]
# gpg:                 aka "Samuel Thibault <samuel.thibault@labri.fr>" [marginal]
# gpg:                 aka "Samuel Thibault <samuel.thibault@ens-lyon.org>" [marginal]
# gpg:                 aka "Samuel Thibault <samuel.thibault@u-bordeaux.fr>" [unknown]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 900C B024 B679 31D4 0F82  304B D017 8C76 7D06 9EE6
#      Subkey fingerprint: E61D BB15 D417 2BDE C97E  92D9 DB55 0E89 F0FA 54F3

* remotes/thibault/tags/samuel-thibault:
  slirp: Gcc 9 -O3 fix

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Gcc 9 needs some convincing that sopreprbuf really is going to fill
in iov in the call from soreadbuf, even though the failure case
shouldn't happen.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190415121740.9881-1-dgilbert@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>

Block layer patches:

- iotests fixes

# gpg: Signature made Fri 12 Apr 2019 17:04:09 BST
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  iotest: Fix 241 to run in generic directory
  iotests: Let 245 pass on tmpfs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Filter the qemu-nbd server output to get rid of a direct reference
to my build directory.

Fixes: e9dce9cb
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

tmpfs does not support O_DIRECT.  Detect this case, and skip flipping
@direct if the filesystem does not support it.

Fixes: bf3e50f6
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

It turns out that having options listed in three places continues to be
a bad idea. I'm still toying with the idea of an improved infrastructure
here, but in the meantime, another bandaid.

There are three locations:
(1) .hx file, formatted as texi
(2) .hx file, formatted as human readable.
(3) .texi file, as section headers, formatted as texi.

You can compare the two summaries within the .hx file like so:

Human-readable command summaries:
`./qemu-img --help | grep 'Command syntax' -A14`
Detokenized texi command summaries:
`grep "@item" qemu-img-cmds.hx | sed -E 's|@var\{([^\}]*?)\}|\1|g'`

You can compare the two separate texi summaries like so:

Texi command summaries:
`grep "@item" qemu-img-cmds.hx"`
Texi command headers:
grep -E "@item.*@var" qemu-img.texi | tail -14

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190409210655.777-1-jsnow@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

On some systems wchar_t is "long int", on others just "int".
So go cast to "long int" and adjust the printf format accordingly.

Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190402073018.17747-1-kraxel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ppc patch queue for 2018-04-12

Here's a last minute pull request for 4.0.  Turns out my last pull
request, to fix a regression in extended config space access for the
pseries machine didn't fix things hard enough.  This PR has a single
patch which improves the fix to work in more cases.

It's a ghastly, ghastly hack, but it's simple and localized.  I
already have patches almost ready to go in 4.1 that provides a simpler
and cleaner solution to all this.

# gpg: Signature made Fri 12 Apr 2019 06:34:16 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-4.0-20190412:
  spapr_pci: Fix broken naming of PCI bus

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Recent commit 5cf0d326 fixed a regression which was preventing the
guest to access the extended config space of a PCIe device. This was
done by introducing a new PCI bus subtype for PAPR. The original fix
was causing PCI busses to be named "spapr-pci-host-bridge-root-bus.N"
instead of "pci.N", which was making upper layers unhappy of course.
This got worked around by hardcoding the PCI bus name to "pci.0", but
this only works for the default PHB. And we're now hitting:

# qemu-system-ppc64 \
             -device spapr-pci-host-bridge,index=1 \
             -device e1000e,bus=pci.0 \
             -device e1000e,bus=pci.1
qemu-system-ppc64: -device e1000e,bus=pci.1: Bus 'pci.1' not found

David already posted some patches [1] to control PCI extended config
space accesses with a new flag in the base PCI bus class instead of
subtyping. These patches are a bit more intrusive though, and
are targetted for 4.1.

When no name is passed to pci_register_bus(), the core device code
generates a lowercase name based on the QOM typename. The typename
for the base PCI bus class is "PCI", hence the "pci.0", "pci.1"
bus names. Rename the type of the PAPR PCI bus to "pci", so that
the QOM code can generate proper names. This is a hack but it is
enough to fix the regression. And all this will be reworked properly
in 4.1.

[1] https://patchwork.ozlabs.org/project/qemu-devel/list/?series=100486



Fixes: 5cf0d326
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155500034416.646888.1307366522340665522.stgit@bahia.lab.toulouse-stg.fr.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>