IASL isn't needed when dumping ACPI tables from guest for
rebuild purposes. So move this part out from IASL branch.

Makes rebuild-expected-aml.sh work without IASL installed
on host.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20190708092410.11167-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

The virtio-balloon config size changed in QEMU 4.0 even for existing
machine types.  Migration from QEMU 3.1 to 4.0 can fail in some
circumstances with the following error:

  qemu-system-x86_64: get_pci_config_device: Bad config data: i=0x10 read: a1 device: 1 cmask: ff wmask: c0 w1cmask:0

This happens because the virtio-balloon config size affects the VIRTIO
Legacy I/O Memory PCI BAR size.

Introduce a qdev property called "qemu-4-0-config-size" and enable it
only for the QEMU 4.0 machine types.  This way <4.0 machine types use
the old size, 4.0 uses the larger size, and >4.0 machine types use the
appropriate size depending on enabled virtio-balloon features.

Live migration to and from old QEMUs to QEMU 4.1 works again as long as
a versioned machine type is specified (do not use just "pc"!).

Originally-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190710141440.27635-1-stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

The function declarations for pci_cap_slot_get and
pci_cap_slot_write_config call the argument "slot_ctl", but the function
definitions and all the call sites drop the 'o' and call it "slt_ctl".
Let's be consistent.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>

slt ctl/status are passed in incorrect order.
Fix this up.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>

ppc patch queue for 2019-07-12

First 4.1 hard freeze pull request.  Not much here, just a bug fix for
the XICS interrupt controller and a SLOF firmware update to fix a bug
with IP discovery when there are multiple NICs.

# gpg: Signature made Fri 12 Jul 2019 06:51:24 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-4.1-20190712:
  xics/kvm: Always set the MASKED bit if interrupt is masked
  pseries: Update SLOF firmware image

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The ics_set_kvm_state_one() function is called either to restore the
state of an interrupt source during migration or to set the interrupt
source to a default state during reset.

Since always, ie. 2013, the code only sets the MASKED bit if the 'current
priority' and the 'saved priority' are different. This is likely true
when restoring an interrupt that had been previously masked with the
ibm,int-off RTAS call. However this is always false in the case of
reset since both 'current priority' and 'saved priority' are equal to
0xff, and the MASKED bit is never set.

The legacy KVM XICS device gets away with that because it ends updating
its internal structure the same way, whether the MASKED bit is set or
the priority is 0xff.

The XICS-on-XIVE device for POWER9 is different. It sticks to the KVM
documentation [1] and _really_ relies on the MASKED bit to correctly
set. If not, it will configure the interrupt source in the XIVE HW, even
though the guest hasn't configured the interrupt yet. This disturbs the
complex logic implemented in XICS-on-XIVE and may result in the loss of
subsequent queued events.

Always set the MASKED bit if interrupt is masked as expected by the KVM
XICS-on-XIVE device. This has no impact on the legacy KVM XICS.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/virtual/kvm/devices/xics.txt



Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156217454083.559957.7359208229523652842.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

This only has a fix for ipv4-after-ipv6 booting problem.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Pull request

# gpg: Signature made Wed 10 Jul 2019 20:21:58 BST
# gpg:                using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* remotes/jnsnow/tags/bitmaps-pull-request:
  docs/bitmaps: use QMP lexer instead of json
  sphinx: add qmp_lexer
  docs/interop/bitmaps.rst: Fix typos

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Testing and gdbstub fixes:

  - fix diff-out pass in check-tcg
  - ensure generation of fprem reference
  - fix gdb set_reg fallback

# gpg: Signature made Wed 10 Jul 2019 11:24:28 BST
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-and-gdbstub-100719-1:
  gdbstub: revert to previous set_reg behaviour
  gdbstub: add some notes to the header comment
  tests/tcg: fix diff-out pass to properly report failure
  tests/tcg: fix up test-i386-fprem.ref generation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The annotated style json we use in QMP documentation is not strict json
and depending on the version of Sphinx (2.0+) or Pygments installed,
might cause the build to fail.

Use the new QMP lexer.

Further, some versions of Sphinx can not apply custom lexers to "code"
directives and require the use of "code-block" directives instead, so
make that change at this time as well.

Tested under:
- Sphinx 1.3.6 and Pygments 2.4
- Sphinx 1.7.6 and Pygments 2.2 (Fedora 29 packages)
- Sphinx 2.0.1 and Pygments 2.4
- Sphinx 3.0.0+/f396b3a783 and Pygments 2.4 (From Sphinx git c4f44bdd)

Reported-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 20190603214653.29369-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

Sphinx, through Pygments, does not like annotated json examples very
much. In some versions of Sphinx (1.7), it will render the non-json
portions of code blocks in red, but in newer versions (2.0) it will
throw an exception and not highlight the block at all. Though we can
suppress this warning, it doesn't bring back highlighting on non-strict
json blocks.

We can alleviate this by creating a custom lexer for QMP examples that
allows us to properly highlight these examples in a robust way, keeping
our directionality and elision notations.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reported-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190603214653.29369-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

Pygments and Sphinx get pickier all the time; Sphinx 2.1+ now catches
these errors.

Signed-off-by: John Snow <jsnow@redhat.com>
Reported-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190603214653.29369-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

The refactoring of handle_set_reg missed the fact we previously had
responded with an empty packet when we were not using XML based
protocols. This broke the fallback behaviour for architectures that
don't have registers defined in QEMU's gdb-xml directory.

Revert to the previous behaviour and clean up the commentary for what
is going on.

Fixes: 62b3320b
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Jon Doron <arilou@gmail.com>

Add a link to the remote protocol spec and an SPDX tag.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>

A side effect of piping the output to head is squash the exit status
of the diff command. Fix this by only doing the pipe if the diff
failed and then ensuring the status is non-zero.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

We never shipped the reference data in the source tree because it's
quite big (64M). As a result the only option is to generate it
locally. Although we have a rule to generate the reference file we
missed the dependency and location changes, probably because it's only
run for SLOW test runs.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Restore 32-bit I/O accesses on AMD flashes
(precautionary revert).

# gpg: Signature made Tue 09 Jul 2019 16:18:10 BST
# gpg:                using RSA key E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/pflash-next-20190709:
  Revert "hw/block/pflash_cfi02: Reduce I/O accesses to 16-bit"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Recent commit "Makefile: Reuse all's recursion machinery for clean and
install" broke targets clean and distclean in the source directory
before running configure:

    $ make clean
      LD      recurse-clean.mo
    cc: fatal error: no input files
    compilation terminated.
    make: *** [rules.mak:118: recurse-clean.mo] Error 1

Root cause is missing .PHONY.  Fix that.

Fixes: 1338a4b7
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

This reverts commit 3ae0343d.

Stephen Checkoway noticed commit 3ae0343d is incorrect.
This commit state all parallel flashes are limited to 16-bit
accesses, however the x32 configuration exists in some models,
such the Cypress S29CL032J, which CFI Device Geometry Definition
announces:

  CFI ADDR     DATA
  0x28,0x29 = 0x0003 (x32-only asynchronous interface)

Guests should not be affected by the previous change, because
QEMU does not announce itself as x32 capable:

    /* Flash device interface (8 & 16 bits) */
    pfl->cfi_table[0x28] = 0x02;
    pfl->cfi_table[0x29] = 0x00;

Commit 3ae0343d does not restrict the bus to 16-bit accesses,
but restrict the implementation as 16-bit access max, so a guest
32-bit access will result in 2x 16-bit calls.

Now, we have 2 boards that register the flash device in 32-bit
access:

- PPC: taihu_405ep

  The CFI id matches the S29AL008J that is a 1MB in x16, while
  the code QEMU forces it to be 2MB, and checking Linux it expects
  a 4MB flash.

- ARM: Digic4

  While the comment says "Samsung K8P3215UQB 64M Bit (4Mx16)",
  this flash is 32Mb (2MB). Also note the CFI id does not match
  the comment.

To avoid unexpected side effect, we revert commit 3ae0343d,
and will clean the board code later.

Reported-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

Fixes in cpu models, tcg, and vfio-ccw.

# gpg: Signature made Tue 09 Jul 2019 13:20:52 BST
# gpg:                using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg:                issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20190709:
  s390x/tcg: move fallthrough annotation
  s390: cpumodel: fix description for the new vector facility
  s390x/cpumodel: Set up CPU model for AQIC interception
  vfio-ccw: Test vfio_set_irq_signaling() return value

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Minor gvec fix for as-yet uncommitted altivec host.
Build fix for riscv host.

# gpg: Signature made Tue 09 Jul 2019 07:27:34 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20190709:
  tcg: Fix expansion of INDEX_op_not_vec
  tcg/riscv: Fix RISC-VH host build failure

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

...so that the compiler properly recognizes it.

Reported-by: Stefan Weil <sw@weilnetz.de>
Fixes: f180da83 ("s390x/tcg: Implement VECTOR LOAD LOGICAL ELEMENT AND ZERO")
Message-Id: <20190708125433.16927-3-cohuck@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

The new facility is called "Vector-Packed-Decimal-Enhancement Facility"
and not "Vector BCD enhancements facility 1". As the shortname might
have already found its way into some backports, let's keep vxbeh.

Fixes: 54d65de0 ("s390x/cpumodel: vector enhancements")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190708150931.93448-1-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

This operation can always be emitted, even if we need to
fall back to xor.  Adjust the assertions to match.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Commit 269bd5d8 "cpu: Move the softmmu tlb to CPUNegativeOffsetState'
broke the RISC-V host build as there are two variables that are used but
not defined.

This patch renames the undefined variables mask_off and table_off to the
existing (but unused) mask_ofs and table_ofs variables.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <79729cc88ca509e08b5c4aa0aa8a52847af70c0f.1561039316.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tpm 2019/07/08 v1

# gpg: Signature made Mon 08 Jul 2019 15:04:46 BST
# gpg:                using RSA key 75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE  C66B 75AD 6580 2A0B 4211

* remotes/stefanberger/tags/pull-tpm-2019-07-08-1:
  hw/tpm: Only build tpm_ppi.o if any of TPM_TIS/TPM_CRB is built

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Block layer patches:

- virtio-scsi: Fix request resubmission after I/O error with iothreads
- qcow2: Fix missing v2/v3 subformat aliases for amend
- qcow(1): More specific error message for wrong format version
- MAINTAINERS: update RBD block maintainer

# gpg: Signature made Mon 08 Jul 2019 15:17:27 BST
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  qcow2: Allow -o compat=v3 during qemu-img amend
  MAINTAINERS: update RBD block maintainer
  block/qcow: Improve error when opening qcow2 files as qcow
  virtio-scsi: restart DMA after iothread
  qdev: add qdev_add_vm_change_state_handler()
  vl: add qemu_add_vm_change_state_handler_prio()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The TPM Physical Presence Interface routines are only used
by the CRB/TIS interfaces. Do not compile this file if any
of them is built.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>

Commit b76b4f60 allowed '-o compat=v3' as an alias for the
less-appealing '-o compat=1.1' for 'qemu-img create' since we want to
use the QMP form as much as possible, but forgot to do likewise for
qemu-img amend.  Also, it doesn't help that '-o help' doesn't list our
new preferred spellings.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Remove Josh as per his request since he is no longer the upstream RBD
tech lead. Add myself as the maintainer since I am the current RBD tech
lead.

Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Reported-by:  <radmehrsaeed7@gmail.com>
Fixes: https://bugs.launchpad.net/bugs/1832914


Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

When the 'cont' command resumes guest execution the vm change state
handlers are invoked.  Unfortunately there is no explicit ordering
between classic qemu_add_vm_change_state_handler() callbacks.  When two
layers of code both use vm change state handlers, we don't control which
handler runs first.

virtio-scsi with iothreads hits a deadlock when a failed SCSI command is
restarted and completes before the iothread is re-initialized.

This patch uses the new qdev_add_vm_change_state_handler() API to
guarantee that virtio-scsi's virtio change state handler executes before
the SCSI bus children.  This way DMA is restarted after the iothread has
re-initialized.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Children sometimes depend on their parent's vm change state handler
having completed.  Add a vm change state handler API for devices that
guarantees tree depth ordering.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Add an API for registering vm change state handlers with a well-defined
ordering.  This is necessary when handlers depend on each other.

Small coding style fixes are included to make checkpatch.pl happy.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

target-arm queue:
 * tests/migration-test: Fix read off end of aarch64_kernel array
 * Fix sve_zcr_len_for_el off-by-one error
 * hw/arm/sbsa-ref: Silence Coverity nit
 * vfp_helper: Call set_fpscr_to_host before updating to FPSCR

# gpg: Signature made Mon 08 Jul 2019 14:21:20 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20190708:
  target/arm/vfp_helper: Call set_fpscr_to_host before updating to FPSCR
  hw/arm/sbsa-ref: Remove unnecessary check for secure_sysmem == NULL
  tests/migration-test: Fix read off end of aarch64_kernel array
  target/arm: Fix sve_zcr_len_for_el

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

In commit e9d65282 we extracted the vfp_set_fpscr_to_host()
function but failed at calling it in the correct place, we call
it after xregs[ARM_VFP_FPSCR] is modified.

Fix by calling this function before we update FPSCR.

Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20190705124318.1075-1-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

In the virt machine, we support TrustZone being either present or
absent, and so the code must deal with the secure_sysmem pointer
possibly being NULL. In the sbsa-ref machine, TrustZone is always
present, but some code and comments copied from virt still treat
it as possibly not being present.

This causes Coverity to complain (CID 1407287) that we check
secure_sysmem for being NULL after an unconditional dereference.
Simplify the code so that instead of initializing the variable
to NULL, unconditionally assigning it, and then testing it for NULL,
we just initialize it correctly in the variable declaration and
then assume it to be non-NULL. We also delete a comment which
only applied to the non-TrustZone config.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190704142004.7150-1-peter.maydell@linaro.org
Tested-by: Radosław Biernacki <radoslaw.biernacki@linaro.org>
Reviewed-by: Radosław Biernacki <radoslaw.biernacki@linaro.org>

The test aarch64 kernel is in an array defined with
 unsigned char aarch64_kernel[] = { [...] }

which means it could be any size; currently it's quite small.
However we write it to a file using init_bootfile(), which
writes exactly 512 bytes to the file. This will break if
we ever end up with a kernel larger than that, and will
read garbage off the end of the array in the current setup
where the kernel is smaller.

Make init_bootfile() take an argument giving the length of
the data to write. This allows us to use it for all architectures
(previously s390 had a special-purpose init_bootfile_s390x
which hardcoded the file to write so it could write the
correct length). We assert that the x86 bootfile really is
exactly 512 bytes as it should be (and as we were previously
just assuming it was).

This was detected by the clang-7 asan:
==15607==ERROR: AddressSanitizer: global-buffer-overflow on address 0x55a796f51d20 at pc 0x55a796b89c2f bp 0x7ffc58e89160 sp 0x7ffc58e88908
READ of size 512 at 0x55a796f51d20 thread T0
    #0 0x55a796b89c2e in fwrite (/home/petmay01/linaro/qemu-from-laptop/qemu/build/sanitizers/tests/migration-test+0xb0c2e)
    #1 0x55a796c46492 in init_bootfile /home/petmay01/linaro/qemu-from-laptop/qemu/tests/migration-test.c:99:5
    #2 0x55a796c46492 in test_migrate_start /home/petmay01/linaro/qemu-from-laptop/qemu/tests/migration-test.c:593
    #3 0x55a796c44101 in test_baddest /home/petmay01/linaro/qemu-from-laptop/qemu/tests/migration-test.c:854:9
    #4 0x7f906ffd3cc9  (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x72cc9)
    #5 0x7f906ffd3bfa  (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x72bfa)
    #6 0x7f906ffd3bfa  (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x72bfa)
    #7 0x7f906ffd3ea1 in g_test_run_suite (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x72ea1)
    #8 0x7f906ffd3ec0 in g_test_run (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x72ec0)
    #9 0x55a796c43707 in main /home/petmay01/linaro/qemu-from-laptop/qemu/tests/migration-test.c:1187:11
    #10 0x7f906e9abb96 in __libc_start_main /build/glibc-OTsEL5/glibc-2.27/csu/../csu/libc-start.c:310
    #11 0x55a796b6c2d9 in _start (/home/petmay01/linaro/qemu-from-laptop/qemu/build/sanitizers/tests/migration-test+0x932d9)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190702150311.20467-1-peter.maydell@linaro.org

Off by one error in the EL2 and EL3 tests.  Remove the test
against EL3 entirely, since it must always be true.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190702104732.31154-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>