There is a rare race between the atomic_cmpxchg and
bdrv_aio_cancel/bdrv_aio_cancel_async invocations.  Detect it, the
only sensible we can do about it is to exit long_cb immediately.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

MIPS queue for June 1st, 2019

# gpg: Signature made Sat 01 Jun 2019 19:20:47 BST
# gpg:                using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01  DD75 D497 2A89 67F7 5A65

* remotes/amarkovic/tags/mips-queue-jun-1-2019:
  target/mips: Improve performance of certain MSA instructions
  target/mips: Clean up lmi_helper.c
  target/mips: Clean up dsp_helper.c
  tests/tcg: target/mips: Add tests for MSA bit set instructions
  target/mips: Amend and cleanup MSA TCG tests
  target/mips: Add emulation of MMI instruction PCPYUD
  target/mips: Add emulation of MMI instruction PCPYLD
  target/mips: Add emulation of MMI instruction PCPYH

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Eliminate loops for better performance.

Following MSA instructions from "UNOP" group are affected:

 - NLZC.<B|H|W|D>
 - NLOC.<B|H|W|D>
 - PCNT.<B|H|W|D>

Following MSA instructions from "BINOP" group are affected:

 - ADD_A.<B|H|W|D>
 - ADDS_A.<B|H|W|D>
 - ADDS_S.<B|H|W|D>
 - ADDS_U.<B|H|W|D>
 - ADDV.<B|H|W|D>
 - ASUB_S.<B|H|W|D>
 - ASUB_U.<B|H|W|D>
 - AVE_S.<B|H|W|D>
 - AVE_U.<B|H|W|D>
 - AVER_S.<B|H|W|D>
 - AVER_U.<B|H|W|D>
 - BCLR.<B|H|W|D>
 - BNEG.<B|H|W|D>
 - BSET.<B|H|W|D>
 - CEQ.<B|H|W|D>
 - CLE_S.<B|H|W|D>
 - CLE_U.<B|H|W|D>
 - CLT_S.<B|H|W|D>
 - CLT_U.<B|H|W|D>
 - DIV_S.<B|H|W|D>
 - DIV_U.<B|H|W|D>
 - DOTP_S.<B|H|W|D>
 - DOTP_U.<B|H|W|D>
 - HADD_S.<B|H|W|D>
 - HADD_U.<B|H|W|D>
 - HSUB_S.<B|H|W|D>
 - HSUB_U.<B|H|W|D>
 - MAX_A.<B|H|W|D>
 - MAX_S.<B|H|W|D>
 - MAX_U.<B|H|W|D>
 - MIN_A.<B|H|W|D>
 - MIN_S.<B|H|W|D>
 - MIN_U.<B|H|W|D>
 - MOD_S.<B|H|W|D>
 - MOD_U.<B|H|W|D>
 - MUL_Q.<B|H|W|D>
 - MULR_Q.<B|H|W|D>
 - MULV.<B|H|W|D>
 - SLL.<B|H|W|D>
 - SRA.<B|H|W|D>
 - SRAR.<B|H|W|D>
 - SRL.<B|H|W|D>
 - SRLR.<B|H|W|D>
 - SUBS_S.<B|H|W|D>
 - SUBS_U.<B|H|W|D>
 - SUBSUS_U.<B|H|W|D>
 - SUBSUU_S.<B|H|W|D>
 - SUBV.<B|H|W|D>

Following MSA instructions from "TEROP" group are affected:

 - BINSL.<B|H|W|D>
 - BINSR.<B|H|W|D>
 - DPADD_S.<B|H|W|D>
 - DPADD_U.<B|H|W|D>
 - DPSUB_S.<B|H|W|D>
 - DPSUB_U.<B|H|W|D>
 - MADD_Q.<B|H|W|D>
 - MADDR_Q.<B|H|W|D>
 - MADDV.<B|H|W|D>
 - MSUB_Q.<B|H|W|D>
 - MSUBR_Q.<B|H|W|D>
 - MSUBV.<B|H|W|D>

Additionally, following MSA instructionas are also affected:

 - ILVL.<B|H|W|D>
 - ILVR.<B|H|W|D>
 - ILVEV.<B|H|W|D>
 - ILVOD.<B|H|W|D>
 - PCKEV.<B|H|W|D>
 - PCKOD.<B|H|W|D>

Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1551718283-4487-2-git-send-email-mateja.marjanovic@rt-rk.com>

Remove several minor checkpatch warnings and errors.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1556018982-3715-7-git-send-email-aleksandar.markovic@rt-rk.com>

Remove several minor checkpatch warnings and errors.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1556018982-3715-6-git-send-email-aleksandar.markovic@rt-rk.com>

Add tests for MSA bit set instructions. This includes following
instructions:

  * BCLR.B - clear bit (bytes)
  * BCLR.H - clear bit (halfwords)
  * BCLR.W - clear bit (words)
  * BCLR.D - clear bit (doublewords)
  * BNEG.B - negate bit (bytes)
  * BNEG.H - negate bit (halfwords)
  * BNEG.W - negate bit (words)
  * BNEG.D - negate bit (doublewords)
  * BSET.B - set bit (bytes)
  * BSET.H - set bit (halfwords)
  * BSET.W - set bit (words)
  * BSET.D - set bit (doublewords)

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1555699081-24577-5-git-send-email-aleksandar.markovic@rt-rk.com>

Add missing bits and peaces of the tests of the emulation of certain
MSA (non-immediate variants): some tests were missing two last cases;
some instructions were missing wrappers; some test included wrong
headers; some tests were missing altogether; updated some copywright
preambles; do several other minor cleanups.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1555699081-24577-4-git-send-email-aleksandar.markovic@rt-rk.com>

Add emulation of MMI instruction PCPYUD. The emulation is implemented
using TCG front end operations directly to achieve better performance.

Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551712405-2530-4-git-send-email-mateja.marjanovic@rt-rk.com>

Add emulation of MMI instruction PCPYLD. The emulation is implemented
using TCG front end operations directly to achieve better performance.

Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551712405-2530-3-git-send-email-mateja.marjanovic@rt-rk.com>

Add emulation of MMI instruction PCPYH. The emulation is implemented
using TCG front end operations directly to achieve better performance.

Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551712405-2530-2-git-send-email-mateja.marjanovic@rt-rk.com>

ppc patch queue 2019-05-29

Next pull request against qemu-4.1.  Highlights:
  * KVM accelerated support for the XIVE interrupt controller in PAPR
    guests
  * A number of TCG vector fixes
  * Fixes for the PReP / 40p machine
  * Improvements to make check-tcg test coverage

Other than that it's just a bunch of assorted fixes, cleanups and
minor improvements.

This supersedes both the pull request dated 2019-05-21 and the one
dated 2019-05-22.  I've dropped one hunk which I think may have caused
the check-tcg failure that Peter saw (by enabling the ppc64abi32
build, which I think has been broken for ages).  I'm not entirely
certain, since I haven't reproduced exactly the same failure.

# gpg: Signature made Wed 29 May 2019 07:49:04 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-4.1-20190529: (44 commits)
  ppc/pnv: add dummy XSCOM registers for PRD initialization
  ppc/pnv: introduce new skiboot platform properties
  spapr: Don't migrate the hpt_maxpagesize cap to older machine types
  spapr: change default interrupt mode to 'dual'
  spapr/xive: fix multiple resets when using the 'dual' interrupt mode
  docs: provide documentation on the POWER9 XIVE interrupt controller
  spapr/irq: add KVM support to the 'dual' machine
  ppc/xics: fix irq priority in ics_set_irq_type()
  spapr/irq: initialize the IRQ device only once
  spapr/irq: introduce a spapr_irq_init_device() helper
  spapr: check for the activation of the KVM IRQ device
  spapr: introduce routines to delete the KVM IRQ device
  sysbus: add a sysbus_mmio_unmap() helper
  spapr/xive: activate KVM support
  spapr/xive: add migration support for KVM
  spapr/xive: introduce a VM state change handler
  spapr/xive: add state synchronization with KVM
  spapr/xive: add hcall support when under KVM
  spapr/xive: add KVM support
  spapr: Print out extra hints when CAS negotiation of interrupt mode fails
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

usb-hub: port count config option, emulate power switching, cleanups.
usb-tablet, usb-host: bugfixes.

# gpg: Signature made Wed 29 May 2019 07:28:18 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20190529-pull-request:
  usb-tablet: fix serial compat property
  usb-hub: emulate per port power switching
  usb-hub: add usb_hub_port_update()
  usb-hub: add helpers to update port state
  usb-hub: make number of ports runtime-configurable
  usb-hub: tweak feature names
  usb-host: avoid libusb_set_configuration calls
  usb-host: skip reset for untouched devices
  usb: call reset handler before updating state

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

vga: add vhost-user-gpu.

# gpg: Signature made Wed 29 May 2019 05:40:02 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20190529-pull-request:
  hw/display: add vhost-user-vga & gpu-pci
  virtio-gpu: split virtio-gpu-pci & virtio-vga
  virtio-gpu: split virtio-gpu, introduce virtio-gpu-base
  spice-app: fix running when !CONFIG_OPENGL
  contrib: add vhost-user-gpu
  util: compile drm.o on posix
  virtio-gpu: add a pixman helper header
  virtio-gpu: add bswap helpers header
  vhost-user: add vhost_user_gpu_set_socket()
  virtio-gpu: add sanity check

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Pull request

# gpg: Signature made Wed 29 May 2019 00:58:33 BST
# gpg:                using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* remotes/jnsnow/tags/bitmaps-pull-request:
  iotests: test external snapshot with bitmap copying
  qapi: support external bitmaps in block-dirty-bitmap-merge
  migration/dirty-bitmaps: change bitmap enumeration method

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Block patches:
- qcow2: Use threads for encrypted I/O
- qemu-img rebase: Optimizations
- backup job: Allow any source node, and some refactoring
- Some general simplifications in the block layer

# gpg: Signature made Tue 28 May 2019 20:26:56 BST
# gpg:                using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg:                issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1  1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2019-05-28: (21 commits)
  blockdev: loosen restrictions on drive-backup source node
  qcow2-bitmap: initialize bitmap directory alignment
  qcow2: skip writing zero buffers to empty COW areas
  qemu-img: rebase: Reuse in-chain BlockDriverState
  qemu-img: rebase: Reduce reads on in-chain rebase
  qemu-img: rebase: Reuse parent BlockDriverState
  block: Make bdrv_root_attach_child() unref child_bs on failure
  block: Use bdrv_unref_child() for all children in bdrv_close()
  block/backup: refactor: split out backup_calculate_cluster_size
  block/backup: unify different modes code path
  block/backup: refactor and tolerate unallocated cluster skipping
  block/backup: move to copy_bitmap with granularity
  block/backup: simplify backup_incremental_init_copy_bitmap
  qcow2: do encryption in threads
  qcow2: bdrv_co_pwritev: move encryption code out of the lock
  qcow2: qcow2_co_preadv: improve locking
  qcow2-threads: split out generic path
  qcow2-threads: qcow2_co_do_compress: protect queuing by mutex
  qcow2-threads: use thread_pool_submit_co
  qcow2: add separate file for threaded data processing functions
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

s/kbd/tablet/, fixes cut+paste bug.

Cc: qemu-stable@nongnu.org
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190520081805.15019-1-kraxel@redhat.com

Add support for per port power switching.
Virtual power of course ;)

Use port-power=on property to enable this.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190524070310.4952-6-kraxel@redhat.com

Helper function to update port status bits which depends on the
connected device.  We need the same logic for device attach and
port reset, so factor it out.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190524070310.4952-5-kraxel@redhat.com

Add usb_hub_port_set() and usb_hub_port_clear() helpers which care about
updating the change bits (port->wPortChange) properly, so we don't need
to have that logic sprinkled all over the place ;)

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190524070310.4952-4-kraxel@redhat.com

Add num_ports property which allows configure the number of downstream
ports.  Valid range is 1-8, default is 8.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190524070310.4952-3-kraxel@redhat.com

Add dashes, so they don't look like two separate things when printed.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190524070310.4952-2-kraxel@redhat.com

Seems some devices become confused when we call
libusb_set_configuration().  So before calling the function check
whenever the device has multiple configurations in the first place, and
in case it hasn't (which is the case for the majority of devices) simply
skip the call as it will have no effect anyway.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190522094702.17619-4-kraxel@redhat.com

If the guest didn't talk to the device yet, skip the reset.
Without this usb-host devices get resetted a number of times
at boot time for no good reason.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190522094702.17619-3-kraxel@redhat.com

That way the device reset handler can see what
the before-reset state of the device is.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190522094702.17619-2-kraxel@redhat.com

Add new virtio-gpu devices with a "vhost-user" property. The
associated vhost-user backend is used to handle the virtio rings and
provide rendering results thanks to the vhost-user-gpu protocol.

Example usage:
-object vhost-user-backend,id=vug,cmd="./vhost-user-gpu"
-device vhost-user-vga,vhost-user=vug

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-10-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Add base classes that are common to vhost-user-gpu-pci and
vhost-user-vga.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-9-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Add a base class that is common to virtio-gpu and vhost-user-gpu
devices.

The VirtIOGPUBase base class provides common functionalities necessary
for both virtio-gpu and vhost-user-gpu:
- common configuration (max-outputs, initial resolution, flags)
- virtio device initialization, including queue setup
- device pre-conditions checks (iommu)
- migration blocker
- virtio device callbacks
- hooking up to qemu display subsystem
- a few common helper functions to reset the device, retrieve display
informations
- a class callback to unblock the rendering (for GL updates)

What is left to the virtio-gpu subdevice to take care of, in short,
are all the virtio queues handling, command processing and migration.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-8-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Do not set 'gl' parameter, fixes:
qemu-system-x86_64: Invalid parameter 'gl'

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-7-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Add a vhost-user gpu backend, based on virtio-gpu/3d device. It is
associated with a vhost-user-gpu device.

Various TODO and nice to have items:
- multi-head support
- crash & resume handling
- accelerated rendering/display that avoids the waiting round trips
- edid support

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-6-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

OpenGL isn't required to use DRM rendernodes. The following patches
uses it for 2d resources for ex.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-5-marcandre.lureau@redhat.com

[ kraxel s/LINUX/POSIX/ (fixes openbsd build failure) ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

This will allow to share the format conversion function with
vhost-user-gpu.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

The helper functions are useful to build the vhost-user-gpu backend.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Add a new vhost-user message to give a unix socket to a vhost-user
backend for GPU display updates.

Back when I started that work, I added a new GPU channel because the
vhost-user protocol wasn't bidirectional. Since then, there is a
vhost-user-slave channel for the slave to send requests to the master.
We could extend it with GPU messages. However, the GPU protocol is
quite orthogonal to vhost-user, thus I chose to have a new dedicated
channel.

See vhost-user-gpu.rst for the protocol details.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

PRD (Processor recovery diagnostics) is a service available on
OpenPower systems. The opal-prd daemon initializes the PowerPC
Processor through the XSCOM bus and then waits for hardware diagnostic
events.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190527071722.31424-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Newer skiboots (after 6.3) support QEMU platforms that have
characteristics closer to real OpenPOWER systems. The CPU type is used
to define the BMC drivers: Aspeed AST2400 for POWER8 processors and
AST2500 for POWER9s.

Advertise the new platform property names, "qemu,powernv8" and
"qemu,powernv9", using the CPU type chosen for the QEMU PowerNV
machine. Also, advertise the original platform name "qemu,powernv" in
case of POWER8 processors for compatibility with older skiboots.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190527071749.31499-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Commit 0b8c89be7f7b added the hpt_maxpagesize capability to the migration
stream. This is okay for new machine types but it breaks backward migration
to older QEMUs, which don't expect the extra subsection.

Add a compatibility boolean flag to the sPAPR machine class and use it to
skip migration of the capability for machine types 4.0 and older. This
fixes migration to an older QEMU. Note that the destination will emit a
warning:

qemu-system-ppc64: warning: cap-hpt-max-page-size lower level (16) in incoming stream than on destination (24)

This is expected and harmless though. It is okay to migrate from a lower
HPT maximum page size (64k) to a greater one (16M).

Fixes: 0b8c89be7f7b "spapr: Add forgotten capability to migration stream"
Based-on: <20190522074016.10521-3-clg@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155853262675.1158324.17301777846476373459.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Now that XIVE support is complete (QEMU emulated and KVM devices),
change the pseries machine to advertise both interrupt modes: XICS
(P7/P8) and XIVE (P9).

The machine default interrupt modes depends on the version. Current
settings are:

    pseries   default interrupt mode

    4.1       dual
    4.0       xics
    3.1       xics
    3.0       legacy xics (different IRQ number space layout)

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190522074016.10521-3-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Today, when a reset occurs on a pseries machine using the 'dual'
interrupt mode, the KVM devices are released and recreated depending
on the interrupt mode selected by CAS. If XIVE is selected, the SysBus
memory regions of the SpaprXive model are initialized by the KVM
backend initialization routine each time a reset occurs. This leads to
a crash after a couple of resets because the machine reaches the
QDEV_MAX_MMIO limit of SysBusDevice :

qemu-system-ppc64: hw/core/sysbus.c:193: sysbus_init_mmio: Assertion `dev->num_mmio < QDEV_MAX_MMIO' failed.

To fix, initialize the SysBus memory regions in spapr_xive_realize()
called only once and remove the same inits from the QEMU and KVM
backend initialization routines which are called at each reset.

Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190522074016.10521-2-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

This documents the overall XIVE architecture and the XIVE support for
sPAPR guest machines (pseries).

It also provides documentation on the 'info pic' command.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190521082411.24719-1-clg@kaod.org>
Reviewed-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

The interrupt mode is chosen by the CAS negotiation process and
activated after a reset to take into account the required changes in
the machine. This brings new constraints on how the associated KVM IRQ
device is initialized.

Currently, each model takes care of the initialization of the KVM
device in their realize method but this is not possible anymore as the
initialization needs to be done globaly when the interrupt mode is
known, i.e. when machine is reseted. It also means that we need a way
to delete a KVM device when another mode is chosen.

Also, to support migration, the QEMU objects holding the state to
transfer should always be available but not necessarily activated.

The overall approach of this proposal is to initialize both interrupt
mode at the QEMU level to keep the IRQ number space in sync and to
allow switching from one mode to another. For the KVM side of things,
the whole initialization of the KVM device, sources and presenters, is
grouped in a single routine. The XICS and XIVE sPAPR IRQ reset
handlers are modified accordingly to handle the init and the delete
sequences of the KVM device.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190513084245.25755-15-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>