This function wraps bdrv_co_delete_file for the common case of removing a file,
which was just created by format driver, on an error condition.

It hides the -ENOTSUPP error, and reports all other errors otherwise.

Use it in luks driver

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20201217170904.946013-3-mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

When the underlying block device doesn't support the
bdrv_co_delete_file interface, an 'Error' object was leaked.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201217170904.946013-2-mlevitsk@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Tests in the "auto" group should support qcow2 so that they can
be run during "make check-block". Test 259 only supports "raw", so
it currently always gets skipped when running "make check-block".
Let's skip this unnecessary step and remove it from the auto group.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210215103835.1129145-1-thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Linux blkfront expects both "discard-granularity" and
"discard-alignment" present on xenbus in order to properly enable the
feature, not exposing "discard-alignment" left some Linux blkfront
versions with a broken discard setup. This has also been addressed in
Linux with:

https://lore.kernel.org/lkml/20210118151528.81668-1-roger.pau@citrix.com/T/#u



Fix QEMU to report a "discard-alignment" of 0, in order for it to work
with older Linux frontends.

Reported-by: Arthur Borsboom <arthurborsboom@gmail.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Message-Id: <20210118153330.82324-1-roger.pau@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

cmd_fis is mapped as DMA_DIRECTION_FROM_DEVICE, however, it is read
from, and not written to anywhere. Fix the DMA_DIRECTION and mark
cmd_fis as read-only in the code.

Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210119164051.89268-1-alxndr@bu.edu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Currently, if guest has workloads, IO thread will acquire aio_context
lock before do io_submit, it leads to segmentfault when do block commit
after snapshot. Just like below:

Program received signal SIGSEGV, Segmentation fault.

[Switching to Thread 0x7f7c7d91f700 (LWP 99907)]
0x00005576d0f65aab in bdrv_mirror_top_pwritev at ../block/mirror.c:1437
1437    ../block/mirror.c: No such file or directory.
(gdb) p s->job
$17 = (MirrorBlockJob *) 0x0
(gdb) p s->stop
$18 = false

Call trace of IO thread:
0  0x00005576d0f65aab in bdrv_mirror_top_pwritev at ../block/mirror.c:1437
1  0x00005576d0f7f3ab in bdrv_driver_pwritev at ../block/io.c:1174
2  0x00005576d0f8139d in bdrv_aligned_pwritev at ../block/io.c:1988
3  0x00005576d0f81b65 in bdrv_co_pwritev_part at ../block/io.c:2156
4  0x00005576d0f8e6b7 in blk_do_pwritev_part at ../block/block-backend.c:1260
5  0x00005576d0f8e84d in blk_aio_write_entry at ../block/block-backend.c:1476
...

Switch to qemu main thread:
0  0x00007f903be704ed in __lll_lock_wait at
/lib/../lib64/libpthread.so.0
1  0x00007f903be6bde6 in _L_lock_941 at /lib/../lib64/libpthread.so.0
2  0x00007f903be6bcdf in pthread_mutex_lock at
/lib/../lib64/libpthread.so.0
3  0x0000564b21456889 in qemu_mutex_lock_impl at
../util/qemu-thread-posix.c:79
4  0x0000564b213af8a5 in block_job_add_bdrv at ../blockjob.c:224
5  0x0000564b213b00ad in block_job_create at ../blockjob.c:440
6  0x0000564b21357c0a in mirror_start_job at ../block/mirror.c:1622
7  0x0000564b2135a9af in commit_active_start at ../block/mirror.c:1867
8  0x0000564b2133d132 in qmp_block_commit at ../blockdev.c:2768
9  0x0000564b2141fef3 in qmp_marshal_block_commit at
qapi/qapi-commands-block-core.c:346
10 0x0000564b214503c9 in do_qmp_dispatch_bh at
../qapi/qmp-dispatch.c:110
11 0x0000564b21451996 in aio_bh_poll at ../util/async.c:164
12 0x0000564b2146018e in aio_dispatch at ../util/aio-posix.c:381
13 0x0000564b2145187e in aio_ctx_dispatch at ../util/async.c:306
14 0x00007f9040239049 in g_main_context_dispatch at
/lib/../lib64/libglib-2.0.so.0
15 0x0000564b21447368 in main_loop_wait at ../util/main-loop.c:232
16 0x0000564b21447368 in main_loop_wait at ../util/main-loop.c:255
17 0x0000564b21447368 in main_loop_wait at ../util/main-loop.c:531
18 0x0000564b212304e1 in qemu_main_loop at ../softmmu/runstate.c:721
19 0x0000564b20f7975e in main at ../softmmu/main.c:50

In IO thread when do bdrv_mirror_top_pwritev, the job is NULL, and stop field
is false, this means the MirrorBDSOpaque "s" object has not been initialized
yet, and this object is initialized by block_job_create(), but the initialize
process is stuck in acquiring the lock.

In this situation, IO thread come to bdrv_mirror_top_pwritev(),which means that
mirror-top node is already inserted into block graph, but its bs->opaque->job
is not initialized.

The root cause is that qemu main thread do release/acquire when hold the lock,
at the same time, IO thread get the lock after release stage, and the crash
occured.

Actually, in this situation, job->job.aio_context will not equal to
qemu_get_aio_context(), and will be the same as bs->aio_context,
thus, no need to release the lock, becasue bdrv_root_attach_child()
will not change the context.

This patch fix this issue.

Fixes: 132ada80 "block: Adjust AioContexts when attaching nodes"

Signed-off-by: Michael Qiu <qiudayu@huayun.com>
Message-Id: <20210203024059.52683-1-08005325@163.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

To disallow certain refcount_bits values, some _unsupported_imgopts
invocations look like "refcount_bits=1[^0-9]", i.e. they match an
integer boundary with [^0-9].  This expression does not match the end of
the string, though, so it breaks down when refcount_bits is the last
option (which it tends to be after the rewrite of the check script in
Python).

Those invocations could use \b or \> instead, but those are not
portable.  They could use something like \([^0-9]\|$\), but that would
be cumbersome.  To make it simple and keep the existing invocations
working, just let _unsupported_imgopts match the regex against $IMGOPTS
plus a trailing space.

Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210210095128.22732-1-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

As we don't have a fully QAPIfied version of object-add yet and it still
has 'gen': false in the schema, it needs to be registered explicitly in
init_qmp_commands() to be available for users.

Fixes: 2af282ec
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210204072137.19663-1-kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

testing and gdbstub updates:

  - more migration of Travis to GitLab
  - drop Travis container
  - remove last of shippable
  - clean up gdbstub MAINTAINERS
  - remove gdb_get_floatN() helpers
  - don't be quiet about skipping gdb tests

# gpg: Signature made Mon 15 Feb 2021 09:41:32 GMT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-gdbstub-150221-1:
  tests/tcg: fix silent skipping of softmmu gdb tests
  bswap.h: Remove unused float-access functions
  gdbstub: Remove unused gdb_get_float32() and gdb_get_float64()
  target/ppc: Drop use of gdb_get_float64() and ldfq_p()
  target/m68k: Drop use of gdb_get_float64() and ldfq_p()
  target/sh4: Drop use of gdb_get_float32() and ldfl_p()
  MAINTAINERS: Add gdbstub.h to the "GDB stub" section
  tests/docker: remove travis container
  travis-ci: Disable C++ optional objects on AArch64 container
  .shippable: remove the last bits
  travis.yml: Move the -fsanitize=thread testing to the gitlab-CI
  travis.yml: (Re-)move the --enable-debug jobs
  travis.yml: Move the --enable-modules test to the gitlab-CI
  travis.yml: Move the -fsanitize=undefined test to the gitlab-CI
  travis.yml: Move gprof/gcov test across to gitlab

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210211122750.22645-16-alex.bennee@linaro.org>

The float-access functions stfl_*, stfq*, ldfl* and ldfq* are now
unused; remove them.  (Accesses to float64 and float32 types can be
made with the ldl/stl/ldq/stq functions, as float64 and float32 are
guaranteed to be typedefs for normal integer types.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210208113428.7181-6-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-15-alex.bennee@linaro.org>

The functions gdb_get_float32() and gdb_get_float64() are now unused;
remove them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210208113428.7181-5-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-14-alex.bennee@linaro.org>

We used to make a distinction between 'float64'/'float32' types and
the 'uint64_t'/'uint32_t' types, requiring special conversion
operations to go between them.  We've now dropped this distinction as
unnecessary, and the 'float*' types remain primarily for
documentation purposes when used in places like the function
prototypes of TCG helper functions.

This means that there's no need for a special gdb_get_float64()
function to write a float64 value to the GDB protocol buffer; we can
just use gdb_get_reg64().

Similarly, for reading a value out of the GDB buffer into a float64
we can use ldq_p() and need not use ldfq_p().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210208113428.7181-4-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-13-alex.bennee@linaro.org>

We used to make a distinction between 'float64'/'float32' types and
the 'uint64_t'/'uint32_t' types, requiring special conversion
operations to go between them.  We've now dropped this distinction as
unnecessary, and the 'float*' types remain primarily for
documentation purposes when used in places like the function
prototypes of TCG helper functions.

This means that there's no need for a special gdb_get_float64()
function to write a float64 value to the GDB protocol buffer; we can
just use gdb_get_reg64().

Similarly, for reading a value out of the GDB buffer into a float64
we can use ldq_p() and need not use ldfq_p().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210208113428.7181-3-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-12-alex.bennee@linaro.org>

We used to make a distinction between 'float64'/'float32' types and
the 'uint64_t'/'uint32_t' types, requiring special conversion
operations to go between them.  We've now dropped this distinction as
unnecessary, and the 'float*' types remain primarily for
documentation purposes when used in places like the function
prototypes of TCG helper functions.

This means that there's no need for a special gdb_get_float32()
function to write a float32 value to the GDB protocol buffer; we can
just use gdb_get_reg32().

Similarly, for reading a value out of the GDB buffer into a float32
we can use ldl_p() and need not use ldfl_p().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210208113428.7181-2-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-11-alex.bennee@linaro.org>

The F: patterns in the "GDB stub" section forgot gdbstub.h; add it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210208113729.25170-1-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-10-alex.bennee@linaro.org>

The travis container that we have no longer matches what travis
currently uses. As all x86 jobs are being moved to GitLab CI too,
there is no compelling reason to update the travis container. It
is simpler to just remove it.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210209135011.1224992-2-berrange@redhat.com>
Message-Id: <20210211122750.22645-9-alex.bennee@linaro.org>

Travis-CI seems to have enforced memory limit on containers,
and the 'GCC check-tcg' job started to fail on AArch64 [*]:

  [2041/3679] Compiling C++ object libcommon.fa.p/disas_nanomips.cpp.o
  FAILED: libcommon.fa.p/disas_nanomips.cpp.o
  {standard input}: Assembler messages:
  {standard input}:577781: Warning: end of file not at end of a line; newline inserted
  {standard input}:577882: Error: unknown pseudo-op: `.lvl35769'
  {standard input}: Error: open CFI at the end of file; missing .cfi_endproc directive
  c++: fatal error: Killed signal terminated program cc1plus
  compilation terminated.

Until we have a replacement for this job on Gitlab-CI, disable
compilation of C++ files by forcing the c++ compiler to /bin/false
so Meson build system can not detect it:

  $ ../configure --cxx=/bin/false

  Compilation
                       C compiler: cc
                  Host C compiler: cc
                     C++ compiler: NO

[*] https://travis-ci.org/github/qemu/qemu/jobs/757819402#L3754



Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210207121239.2288530-1-f4bug@amsat.org>
Message-Id: <20210211122750.22645-8-alex.bennee@linaro.org>

Shippable is about to sunset in May 2021 [1] and we had already moved
a chunk of the crossbuilds to GitLab. We already cross build
mips-softmmu targets since:

  6bcb5fc0 ("gitlab-ci: Add cross-compiling build tests")

and x86 is very well covered.

[1]: https://blog.shippable.com/the-next-step-in-the-evolution-of-shippable-jfrog-pipelines



Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210211122750.22645-7-alex.bennee@linaro.org>

Use clang-10, so we can also use the --enable-tsan configure
option instead of only passing the flag via --extra-cflags.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210211045455.456371-6-thuth@redhat.com>
Message-Id: <20210211122750.22645-6-alex.bennee@linaro.org>

We already have similar jobs in the gitlab-CI ("build-some-softmmu" and
"build-user-plugins"), so let's switch one of them to use --enable-debug
instead of --enable-debug-tcg, then we can simply drop these jobs from
the Travis-CI.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210211045455.456371-5-thuth@redhat.com>
Message-Id: <20210211122750.22645-5-alex.bennee@linaro.org>

Simply add the flag to an existing job, no need for yet another
job here.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210211045455.456371-4-thuth@redhat.com>
Message-Id: <20210211122750.22645-4-alex.bennee@linaro.org>

Add it to the existing Clang job and also add a job that covers the
linux-user code with this compiler flag. To make sure that the detected
problems are not simply ignored, let's also use "-fno-sanitize-recover=..."
now instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210211045455.456371-3-thuth@redhat.com>
Message-Id: <20210211122750.22645-3-alex.bennee@linaro.org>

Similarly to commit 8cdb2cef, move the gprof/gcov test to GitLab.

The coverage-summary.sh script is not Travis-CI specific, make it
generic.

[thuth: Add gcovr and bsdmainutils which are required for the
        coverage-summary.sh script to the ubuntu docker file,
        and use 'check' as test target]

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201108204535.2319870-10-philmd@redhat.com>
Message-Id: <20210211045455.456371-2-thuth@redhat.com>
Message-Id: <20210211122750.22645-2-alex.bennee@linaro.org>

bitmaps patches for 2021-02-12

- add 'transform' member to manipulate bitmaps across migration
- work towards better error handling during bdrv_open

# gpg: Signature made Fri 12 Feb 2021 23:19:39 GMT
# gpg:                using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg:                 aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-bitmaps-2021-02-12:
  block: use return status of bdrv_append()
  block: return status from bdrv_append and friends
  qemu-iotests: 300: Add test case for modifying persistence of bitmap
  migration: dirty-bitmap: Allow control of bitmap persistence
  migration: dirty-bitmap: Use struct for alias map inner members

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Pull request m68k-20210212

Move bootinfo headers to include/standard-headers/asm-m68k
Add M68K_FEATURE_MSP, M68K_FEATURE_MOVEC, M68K_FEATURE_M68010
Add 68060 CR BUSCR and PCR (unimplemented)
CPU types and features cleanup

# gpg: Signature made Fri 12 Feb 2021 21:14:28 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier/tags/m68k-for-6.0-pull-request:
  m68k: import bootinfo headers from linux
  m68k: add MSP detection support for stack pointer swap helpers
  m68k: MOVEC insn. should generate exception if wrong CR is accessed
  m68k: add missing BUSCR/PCR CR defines, and BUSCR/PCR/CAAR CR to m68k_move_to/from
  m68k: improve comments on m68k_move_to/from helpers
  m68k: cascade m68k_features by m680xx_cpu_initfn() to improve readability
  m68k: improve cpu instantiation comments

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

nbd patches for 2021-02-12

- let qemu-nbd handle larger backlog of connecting clients
- fix a few NBD-related iotest failures
- add block cancellation hook for faster response to NBD failures

# gpg: Signature made Fri 12 Feb 2021 19:57:56 GMT
# gpg:                using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg:                 aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2021-02-12:
  iotests/264: add backup-cancel test-case
  block/backup: implement .cancel job handler
  iotests/264: add mirror-cancel test-case
  iotests.py: qemu_nbd_popen: remove pid file after use
  iotests/264: move to python unittest
  block/mirror: implement .cancel job handler
  job: add .cancel handler for the driver
  block/raw-format: implement .bdrv_cancel_in_flight handler
  block/nbd: implement .bdrv_cancel_in_flight
  block: add new BlockDriver handler: bdrv_cancel_in_flight
  io: error_prepend() in qio_channel_readv_full_all() causes segfault
  iotests/210: Fix reference output
  qemu-nbd: Permit --shared=0 for unlimited clients
  qemu-nbd: Use SOMAXCONN for socket listen() backlog

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Now bdrv_append returns status and we can drop all the local_err things
around it.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

The recommended use of qemu error api assumes returning status together
with setting errp and avoid void functions with errp parameter. Let's
improve bdrv_append and some friends to reduce error-propagation
overhead in further patches.

Choose int return status, because bdrv_replace_node_common() has call
to bdrv_check_update_perm(), which reports int status, which seems
correct to propagate.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210202124956.63146-2-vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

Verify that the modification of the bitmap persistence over migration
which is controlled via BitmapMigrationBitmapAliasTransform works
properly.

Based on TestCrossAliasMigration

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <d9c8e9827e9b6001b2dd1b92e64aab858e6d2a86.1613150869.git.pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: Adjust test for explicit read_zeroes=False]
Signed-off-by: Eric Blake <eblake@redhat.com>

Bitmap's source persistence is transported over the migration stream and
the destination mirrors it. In some cases the destination might want to
persist bitmaps which are not persistent on the source (e.g. the result
of merging bitmaps from a number of layers on the source when migrating
into a squashed image) but currently it would need to create another set
of persistent bitmaps and merge them.

This patch adds a 'transform' property to the alias map which allows
overriding the persistence of migrated bitmaps both on the source and
destination sides.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <b20afb675917b86f6359ac3591166ac6d4233573.1613150869.git.pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks, drop dead conditional]
Signed-off-by: Eric Blake <eblake@redhat.com>

Currently the alias mapping hash stores just strings of the target
objects internally. In further patches we'll be adding another member
which will need to be stored in the map so pass a copy of the whole
BitmapMigrationBitmapAlias QAPI struct into the map.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <fc5f27e1fe16cb75e08a248c2d938de3997b9bfb.1613150869.git.pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: adjust long lines]
Signed-off-by: Eric Blake <eblake@redhat.com>

Check that cancel doesn't wait for 10s of nbd reconnect timeout.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205163720.887197-11-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

Cancel in-flight io on target to not waste the time.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205163720.887197-10-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

Check that cancel doesn't wait for 10s of nbd reconnect timeout.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205163720.887197-9-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

To not interfere with other qemu_nbd_popen() calls in same test.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205163720.887197-8-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

We are going to add more test cases, so use the library supporting test
cases.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205163720.887197-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

Cancel in-flight io on target to not waste the time.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205163720.887197-6-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

To be used in mirror in the following commit to cancel in-flight io on
target to not waste the time.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210205163720.887197-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

We are going to cancel in-flight requests on mirror nbd target on job
cancel. Still nbd is often used not directly but as raw-format child.
So, add pass-through handler here.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205163720.887197-4-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>