Use CASE_32_64 and CASE_64 to reduce ifdefs and merge
cases that are identical between 32-bit and 64-bit hosts.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210217202036.1724901-5-richard.henderson@linaro.org>
[PMD: Split patch as 5/5]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210218232840.1760806-6-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use CASE_32_64 and CASE_64 to reduce ifdefs and merge
cases that are identical between 32-bit and 64-bit hosts.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210217202036.1724901-5-richard.henderson@linaro.org>
[PMD: Split patch as 4/5]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210218232840.1760806-5-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use CASE_32_64 and CASE_64 to reduce ifdefs and merge
cases that are identical between 32-bit and 64-bit hosts.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210217202036.1724901-5-richard.henderson@linaro.org>
[PMD: Split patch as 3/5]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210218232840.1760806-4-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use CASE_32_64 and CASE_64 to reduce ifdefs and merge
cases that are identical between 32-bit and 64-bit hosts.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210217202036.1724901-5-richard.henderson@linaro.org>
[PMD: Split patch as 2/5]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210218232840.1760806-3-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use CASE_32_64 and CASE_64 to reduce ifdefs and merge
cases that are identical between 32-bit and 64-bit hosts.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210217202036.1724901-5-richard.henderson@linaro.org>
[PMD: Split patch as 1/5]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210218232840.1760806-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

The use in tcg_tb_lookup is given a random pc that comes from the pc
of a signal handler.  Do not assert that the pointer is already within
the code gen buffer at all, much less the writable mirror of it.

Fixes: db0c51a3
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Allow other places in tcg to restart with a smaller tb.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use the provided cpu_ldst.h interfaces.  This fixes the build vs
the unconverted uses of g2h(), adds missed memory trace events,
and correctly recognizes when a SIGSEGV belongs to the guest via
set_helper_retaddr().

Fixes: 3e8f1628
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

For some vector operations, "1D" is not a valid type, and there
are separate instructions for the 64-bit scalar operation.

Tested-by: Stefan Weil <sw@weilnetz.de>
Buglink: https://bugs.launchpad.net/qemu/+bug/1916112


Fixes: 14e4c1e2 ("tcg/aarch64: Add vector operations")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Fix a typo in the encodeing of the cmle (zero) instruction.

Fixes: 14e4c1e2 ("tcg/aarch64: Add vector operations")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

An hppa guest executing

0x000000000000e05c:  ldil L%10000,r4
0x000000000000e060:  ldo 0(r4),r4
0x000000000000e064:  sub r3,r4,sp

produces

 ---- 000000000000e064 000000000000e068
 sub2_i32 tmp0,tmp4,r3,$0x1,$0x10000,$0x0

after folding and constant propagation.  Then we hit

tcg-target.c.inc:640: tcg_out_insn_3401: Assertion `aimm <= 0xfff' failed.

because aimm is in fact -16, but unsigned.

The ((bl < 0) ^ sub) condition which negates bl is incorrect and will
always lead to this abort.  If the constant is positive, sub will make
it negative; if the constant is negative, sub will keep it negative.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

some accumulated s390x fixes

# gpg: Signature made Fri 05 Mar 2021 15:50:00 GMT
# gpg:                using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg:                issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck-gitlab/tags/s390x-20210305:
  target/s390x/kvm: Simplify debug code
  vfio-ccw: Do not read region ret_code after write
  css: SCHIB measurement block origin must be aligned
  virtio-ccw: commands on revision-less devices
  s390x/pci: restore missing Query PCI Function CLP data
  hw/s390x: fix build for virtio-9p-ccw
  target/s390x/arch_dump: Fix warning for the name field in the PT_NOTE section
  s390x/cpu_model: disallow unpack for --only-migratable

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

QAPI patches patches for 2021-03-05

# gpg: Signature made Fri 05 Mar 2021 14:42:18 GMT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2021-03-05:
  qapi: Fix parse errors for removal of null from schema language
  qapi: Remove QMP events and commands from user-mode builds
  qga: Utilize QAPI_LIST_APPEND in qmp_guest_network_get_interfaces
  error: Fix "Converting to ERRP_GUARD()" doc on "valid at return"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Commit 9d55380b "qapi: Remove null from schema language" (v4.2.0)
neglected to update two error messages.  Do that now.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210224101442.1837475-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>

We removed the QMP loop in user-mode builds in commit 1935e0e4
("qapi/meson: Remove QMP from user-mode emulation"), now commands
and events code is unreachable.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210224171642.3242293-1-philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

I found another spot that can benefit from using our macros instead of
open-coding qapi list creation.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205171634.1491258-1-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Setting errp = NULL is wrong: the automatic error propagation still
propagates the dangling pointer _auto_errp_prop.local_err.  We need to
set *errp = NULL to clear the dangling pointer.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210125132635.1253219-1-armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>

RISC-V PR for 6.0

This PR is a collection of RISC-V patches:
 - Improvements to SiFive U OTP
 - Upgrade OpenSBI to v0.9
 - Support the QMP dump-guest-memory
 - Add support for the SiFive SPI controller (sifive_u)
 - Initial RISC-V system documentation
 - A fix for the Goldfish RTC
 - MAINTAINERS updates
 - Support for high PCIe memory in the virt machine

# gpg: Signature made Thu 04 Mar 2021 14:44:31 GMT
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20210304:
  hw/riscv: virt: Map high mmio for PCIe
  hw/riscv: virt: Limit RAM size in a 32-bit system
  hw/riscv: virt: Drop the 'link_up' parameter of gpex_pcie_init()
  hw/riscv: Drop 'struct MemmapEntry'
  MAINTAINERS: Add a SiFive machine section
  goldfish_rtc: re-arm the alarm after migration
  docs/system: riscv: Add documentation for sifive_u machine
  docs/system: Add RISC-V documentation
  docs/system: Sort targets in alphabetical order
  hw/riscv: sifive_u: Change SIFIVE_U_GEM_IRQ to decimal value
  hw/riscv: sifive_u: Add QSPI2 controller and connect an SD card
  hw/riscv: sifive_u: Add QSPI0 controller and connect a flash
  hw/ssi: Add SiFive SPI controller support
  hw/block: m25p80: Add various ISSI flash information
  hw/block: m25p80: Add ISSI SPI flash support
  target-riscv: support QMP dump-guest-memory
  roms/opensbi: Upgrade from v0.8 to v0.9
  hw/misc: sifive_u_otp: Use error_report() when block operation fails
  target/riscv: Declare csr_ops[] with a known size

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Some peripherals require 64-bit PCI address, so let's map the high
mmio space for PCIe.

For RV32, the address is hardcoded to below 4 GiB from the highest
accessible physical address. For RV64, the base address depends on
top of RAM and is aligned to its size which is using 16 GiB for now.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210220144807.819-5-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

RV32 supports 34-bit physical address hence the maximum RAM size
should be limited. Limit the RAM size to 10 GiB, which leaves
some room for PCIe high mmio space.

For 32-bit host, this is not needed as machine->ram_size cannot
represent a RAM size that big. Use a #if size test to only do
the size limitation for the 64-bit host.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210220144807.819-4-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

`link_up` is never used in gpex_pcie_init(). Drop it.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210220144807.819-3-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

There is already a MemMapEntry type defined in hwaddr.h. Let's drop
the RISC-V defined `struct MemmapEntry` and use the existing one.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210220144807.819-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Message-id: 6bc077e5ae4a9512c8adf81ae194718f2f17c402.1612836645.git.alistair.francis@wdc.com

After a migration the clock offset is updated, but we also
need to re-arm the alarm if needed.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201220112615.933036-7-laurent@vivier.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

This adds detailed documentation for RISC-V `sifive_u` machine,
including the following information:

- Supported devices
- Hardware configuration information
- Boot options
- Machine-specific options
- Running Linux kernel
- Running VxWorks kernel
- Running U-Boot, and with an alternate configuration

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Message-id: 20210126060007.12904-10-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Add RISC-V system emulator documentation for generic information.
`Board-specific documentation` and `RISC-V CPU features` are only
a placeholder and will be added in the future.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-9-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-8-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

All other peripherals' IRQs are in the format of decimal value.
Change SIFIVE_U_GEM_IRQ to be consistent.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-7-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

This adds the QSPI2 controller to the SoC, and connects an SD
card to it. The generation of corresponding device tree source
fragment is also added.

Specify machine property `msel` to 11 to boot the same upstream
U-Boot SPL and payload image for the SiFive HiFive Unleashed board.
Note subsequent payload is stored in the SD card image.

$ qemu-system-riscv64 -nographic -M sifive_u,msel=11 -smp 5 -m 8G \
    -bios u-boot-spl.bin -drive file=sdcard.img,if=sd

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-6-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

This adds the QSPI0 controller to the SoC, and connects an ISSI
25WP256 flash to it. The generation of corresponding device tree
source fragment is also added.

Since the direct memory-mapped mode is not supported by the SiFive
SPI model, the <reg> property does not populate the second group
which represents the memory mapped address of the SPI flash.

With this commit, upstream U-Boot for the SiFive HiFive Unleashed
board can boot on QEMU 'sifive_u' out of the box. This allows users
to develop and test the recommended RISC-V boot flow with a real
world use case: ZSBL (in QEMU) loads U-Boot SPL from SPI flash to
L2LIM, then U-Boot SPL loads the payload from SPI flash that is
combined with OpenSBI fw_dynamic firmware and U-Boot proper.

Specify machine property `msel` to 6 to allow booting from the SPI
flash. U-Boot spl is directly loaded via `-bios`, and subsequent
payload is stored in the SPI flash image. Example command line:

$ qemu-system-riscv64 -nographic -M sifive_u,msel=6 -smp 5 -m 8G \
    -bios u-boot-spl.bin -drive file=spi-nor.img,if=mtd

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-5-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

This adds the SiFive SPI controller model for the FU540 SoC.
The direct memory-mapped SPI flash mode is unsupported.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-4-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

This updates the flash information table to include various ISSI
flashes that are supported by upstream U-Boot and Linux kernel.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-3-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

This adds the ISSI SPI flash support. The number of dummy cycles in
fast read, fast read dual output and fast read quad output commands
is currently using the default 8. Likewise, the same default value
is used for fast read dual/quad I/O command. Per the datasheet [1],
the number of dummy cycles is configurable, but this is not modeled
at present.

For flash whose size is larger than 16 MiB, the sequence of 3-byte
address along with EXTADD bit in the bank address register (BAR) is
not supported. We assume that guest software always uses op codes
with 4-byte address sequence. Fortunately, this is the case for both
U-Boot and Linux spi-nor drivers.

QPI (Quad Peripheral Interface) that supports 2-cycle instruction
has different default values for dummy cycles of fast read family
commands, and is unsupported at the time being.

[1] http://www.issi.com/WW/pdf/25LP-WP256.pdf



Signed-off-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Add the support needed for creating prstatus elf notes. This allows
us to use QMP dump-guest-memory.

Now ELF notes of RISC-V only contain prstatus elf notes.

Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Message-id: 20210201124458.1248-2-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Upgrade OpenSBI from v0.8 to v0.9 and the pre-built bios images.

The v0.9 release includes the following commits:

35bc810 docs/platform: Update QEMU parameter for fw_payload
78afe11 config.mk: Update QEMU run command for generic and sifive fu540 platforms
ec3e5b1 docs/platform: sifive_fu540: Update U-Boot instructions
7d61a68 README.md: fix markdown link formatting
a5f9104 lib/utils: fdt: Update FDT expand size to 1024 for reserved memory node
ec1abf6 include: sbi_bitops: Remove dead shift assignment in ffs/fls
8e47649 lib: Add sbi_strncmp implementation
2845d2d lib: utils: Add a macro in libfdt_env.h for strncmp
2cfd2fc lib: utils: Use strncmp in fdt_parse_hart_id()
937caee lib: sbi_misaligned_ldst: Determine transformed instruction length correctly
4b18a2a firmware: fw_base: Improve exception stack setup in trap handler
9d56961 lib: sbi_trap: Fix hstatus.SPVP update in sbi_trap_redirect()
d7f87d9 platform: kendryte/k210: fixup FDT
e435ba0 lib: sbi_init: Avoid thundering hurd problem with coldboot_lock
4f3bad6 lib: sbi: Handle the case where MTVAL has illegal instruction address
7b0b289 lib: sbi: Remove redundant SBI_HART_HAS_PMP feature
74d1db7 lib: sbi: Improve PMP CSR detection and progamming
2c341f7 lib: sbi: Detect and print MHPM counters at boot-time
162d453 include: sbi: Few cosmetic changes in riscv_encoding.h
ebc8ebc lib: sbi: Improve HPM CSR read/write emulation
dcb10c00 lib: sbi: Don't handle VS-mode ecall in sbi_trap_handler()
bef63d6 include: Rename ECALL defines to match latest RISC-V spec
c1c7c3e lib: sbi_trap: Allow M-mode to M-mode ECALLs
6734304 lib: sbi: Allow specifying start mode to sbi_hsm_hart_start() API
7ccf6bf lib: sbi: Allow specifying mode in sbi_hart_pmp_check_addr() API
9f935a4 lib: utils: Improve fdt_cpu_fixup() implementation
172fa16 lib: sbi: Ensure coldboot HART supports next privilege mode
aaeca7e platform: generic: Don't mark non-MMU HARTs as invalid
7701ea1 lib: sbi: Fix PMP CSR detection
79bf80b lib: sbi_scratch: typo scatch
a04c465 makefile: fix clean directive
af4b50f Makefile: Build ELF, BIN and LD script in platform build directory
6ca0969 firmware: Add common FW_FDT_PATH compile-time option
9c07c51 firmware: Remove FW_PAYLOAD_FDT_PATH compile-time option
e9a4bfb Makefile: Allow padding zeros when converting DTB to C source
a0f2d4a platform: kendryte/k210: Add some padding for FDT fixups
dbeeacb include: sbi: Remove redundant includes from sbi_platform.h
a12d46a include: sbi: Remove pmp_region callbacks from sbi_platform_operations
a126886 lib: sbi: Configure PMP late in coldboot and warmboot path
f81d6f6 lib: sbi: Remove redundant hartid parameter from sbi_hart_init()
8b65005 include: sbi: Make hartmask pointer const in sbi_hartmask_test_hart()
b1678af lib: sbi: Add initial domain support
e73b92d lib: sbi: Extend sbi_hsm_hart_started_mask() for domains
3a30d2c lib: sbi: Extend sbi_hsm_hart_start() for domains
530e95b lib: sbi: Optimize sbi_hsm_hart_started_mask() implementation
3e20037 lib: sbi: Extend sbi_system_reset() for domains
5edbb7c lib: utils: Update fdt_reserved_memory_fixup() to use current domain
5fd99db lib: utils: Update fdt_cpu_fixup() to use current domain
e856462 lib: sbi: Remove redundant sbi_hart_pmp_xyz() functions
c10c30b lib: sbi: Configure PMP based on domain memory regions
c347408 lib: sbi: Display domain details in boot prints
fdf5d5c docs: Add initial documentation for domain support
74c0ea1 lib: utils: Implement "ranges" property parsing
bf21632 lib: sbi: Detect PMP granularity and number of address bits
a809f40 lib: sbi: Improve boot time print with additional PMP information
914f81f Makefile: Add option to use toolchain default ABI and ISA string
48616b3 lib: sbi: Improve boot prints in cold boot sequence
781cafd docs: fix a typo error
54a7734 include: sbi: Add SBI SRST extension related defines
c4acc60 include: sbi: Remove opensbi specific reset type defines
da07479 platform: Remove dummy system reset functions
5c429ae lib: sbi: Improve system reset platform operations
548d03e lib: sbi: Implement System Reset (SRST) SBI extension
2677324 firmware: fw_base: Optimize trap handler for RV32 systems
8d2edc4 lib: sbi: Fix sbi_hart_switch_mode() for u-mode
3d921fa lib: sbi: Fix typo in sbi_domain_finalize()
4e37022 lib: sbi: Fix domain_count check in sbi_domain_finalize()
c709d40 lib: sbi: Auto start domain only if boot HART within limits
c1f6d89 include: sbi: Use lower bits for domain memory region permissions
62ea4f4 lib: sbi: Override domain boot HART when coldboot HART assigned to it
555e737 lib: sbi: Add error prints in sbi_domain_finalize()
9b65dca include: sbi: Add domains_init() platform operation
c0d2baa docs: Add domain device tree binding documentation
ba741ea lib: utils: Add helper routines to populate domains from FDT
4fffb53 platform: generic: Populate domains from FDT
e7da0b4 lib: utils/libfdt: Upgrade to v1.6.0 release
2179777 lib: utils: Allow FDT domain iteration functions to fail
7baccfc lib: sbi: Add function to register new domain
6fc1986 lib: utils: Remove fdt_domain_get() function
a029bd9 lib: sbi: Remove domain_get() platform callback function
7dcb1e1 lib: sbi: Fix sign-extension in sbi_misaligned_load_handler()
80bc506 lib: sbi: Replace args with trap registers in ecall handler
b7df5e4 lib: sbi: Introduce sbi_trap_exit() API
12394a2 lib: sbi: Allow custom local TLB flush function
0d49c3b lib: utils: Fix shakti uart implementation
db56341 lib: sbi: Allow platforms to provide root domain memory regions
e884416 include: sbi: No need to pack struct sbi_trap_regs
386eba2 include: sbi: No need to pack struct sbi_scratch
1bbf361 include: sbi: Don't pack struct sbi_platform and sbi_platform_operations
da5293f platform: template: Fix compile error
234ed8e include: Bump-up version to 0.9

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: 20210119234438.10132-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

At present when blk_pread() / blk_pwrite() fails, a guest error
is logged, but this is not really a guest error. Change to use
error_report() instead.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1611026585-29971-1-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

csr_ops[] is currently declared with an unknown size in cpu.h.
Since the array size is known, let's do a complete declaration.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1611024723-14293-1-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

We already have the 'run' variable holding 'cs->kvm_run' value.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210303182219.1631042-3-philmd@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

ui/console: message surface tweaks.
ui/cocoa: bugfixes and cleanups.

# gpg: Signature made Thu 04 Mar 2021 08:36:53 GMT
# gpg:                using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20210304-pull-request:
  virtio-gpu: Do not distinguish the primary console
  ui/console: Pass placeholder surface to displays
  ui/console: Add placeholder flag to message surface
  ui/cocoa: Replace fprintf with error_report
  configure: Improve OpenGL dependency detections
  ui/cocoa: Fix stride resolution of pixman image
  ui/gtk: vte: fix sending multiple characeters
  ui/cocoa: Remove the uses of full screen APIs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

virtiofs minor security fix

Fix xattrmap to drop remapped security.capability capabilities.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

# gpg: Signature made Thu 04 Mar 2021 10:36:45 GMT
# gpg:                using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert-gitlab/tags/pull-virtiofs-20210304:
  virtiofs: drop remapped security.capability xattr as needed

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>