Skip to content
Snippets Groups Projects
Select Git revision
  • feature/libtcg-rebase default protected
1 result
Search by author
  • Any Author
  • Anton Anton anjo
1 author
  1. May 17, 2016
  3. Apr 18, 2016
  5. Mar 23, 2016
  7. Mar 22, 2016
  9. Mar 10, 2016
  11. Mar 01, 2016
    • Gerd Hoffmann's avatar
      seabios: update to 1.9.1 stable release · fee5b753
      Gerd Hoffmann authored 
      
git shortlog rel-1.9.0..rel-1.9.1
=================================

Cole Robinson (1):
      biostables: Support SMBIOS 2.6+ UUID format

Kevin O'Connor (7):
      xhci: Check for device disconnects during USB2 reset polling
      xhci: Wait for port enable even for USB3 devices
      sdcard: Only enable error_irq_enable for bits defined in SDHCI v1 spec
      sdcard: fix typo causing 32bit write to 16bit block_size field
      nmi: Don't try to switch onto extra stack in NMI handler
      scsi: Do not call printf() from scsi_is_ready()
      coreboot: Check for unaligned cbfs header

Marcel Apfelbaum (1):
      fw/pci: do not automatically allocate IO region for PCIe bridges

Roger Pau Monne (1):
      build: fix typo in buildversion.py

Signed-off-by: default avatarGerd Hoffmann <kraxel@redhat.com>
      fee5b753
  13. Feb 26, 2016
  15. Feb 25, 2016
    • Eduardo Habkost's avatar
      q35: Remove unused q35-acpi-dsdt.aml file · 75fb3d28
      Eduardo Habkost authored 
      
The file was used only by older machine-types, and it is not
needed anymore.

Signed-off-by: default avatarEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: default avatarMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: default avatarMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: default avatarLaszlo Ersek <lersek@redhat.com>
Reviewed-by: default avatarMarkus Armbruster <armbru@redhat.com>
Reviewed-by: default avatarIgor Mammedov <imammedo@redhat.com>
      75fb3d28
    • Alexey Kardashevskiy's avatar
      pseries: Update SLOF firmware image to 20160223 · 4f7ab0cd
      Alexey Kardashevskiy authored 
      
The main change is virtio 1.0 support.

The complete changelog is:
  > dhcp: fix warning messages when calling strtoip()
  > virtio-scsi: enable virtio 1.0
  > virtio-scsi: use virtio_fill desc api
  > virtio-scsi: use idx during initialization
  > virtio-net: enable virtio 1.0
  > virtio-blk: enable virtio 1.0
  > virtio: 1.0 helper to read 16/32/64 bit value
  > virtio: add and enable 1.0 device setup
  > virtio: 1.0 guest features negotiation
  > virtio: update features set/get register accessor
  > virtio: make all virtio apis 1.0 aware
  > virtio: add 64-bit virtio helpers for 1.0
  > virtio: add virtio 1.0 related struct and defines
  > virtio: get rid of type variable in virtio_device
  > virtio-net: move setup-mac to the open routine
  > virtio-net: make net_hdr_size a variable
  > virtio-net: replace vq array with vq_{tx,rx}
  > virtio-net: use virtio_fill_desc
  > virtio-{net,blk,scsi,9p}: use status variable
  > virtio-blk: add helpers for filling descriptors
  > virtio-{blk,9p}: enable resetting the device
  > virtio: introduce helper for initializing virt queue
  > virtio: fix code style/design issues.
  > fix code style in byteorder.h
  > pci: add byte read/write helper routines
  > virtio-net: fix gcc warnings (-Wextra)
  > virtio-blk: fix gcc warnings (-Wextra)
  > readme: Add a note about coding style
  > dhcp: Remove duplicated strtoip()
  > ethernet: Fix gcc warnings
  > net-snk: Fix gcc warnings
  > net-snk: Fix coding style
  > net-snk: Fix memory leak in dhcp6_process_options()
  > net-snk: Fix memory leak in ip6_to_multicast_mac() / send_ipv6()
  > net-snk: Remove bad NEIGHBOUR_SOLICITATION code in send_ipv6()
  > Fix dma-alloc and dma-map-in functions on board-js2x
  > net-snk: Allow stateless autoconfig IPv6 addresses with IP_INIT_IPV6_MANUAL
  > net-snk: Simplify the ip6_is_multicast() function
  > net-snk: Move global variable definition out of the header file
  > net-snk: Prefer non-link-local unicast IPv6 addresses if possible
  > net-snk: Fix the check for link-local addresses when receiving RAs
  > net-snk: Remove junk at the end of IPv6 TFTP ACK and error packets
  > Fix format strings in usb-ohci.c
  > net-snk: Get rid of junk at the end of sent DHCPv6 packets
  > net-snk: Use transaction IDs in DHCPv4, too
  > net-snk: Make use of DHCPv6 transaction IDs
  > net-snk: Seed the pseudo-random number generator
  > libc: Add srand() call
  > libc: Fix the rand() function to return non-zero values
  > net-snk: Improve printed text when booting via network
  > Increase temporary buffer size of ibm,client-architecture-support call
  > Move archsupport.fs into board-qemu directory
  > boot: stop booting when we encounter HALT
  > fat-files: Fix bug with root-entries = 0 on certain FAT32 file systems
  > usb: print unhandled descriptor in debug mode
  > Improve stack usage with libnvram get_partition function
  > Improve stack usage in libnvram environment variable code
  > libc: Port vsnprintf back from skiboot
  > Move the code for rfill into a separate function
  > Rework wrapper for new_nvram_partition() and fix possible bug in there
  > Stack optimization in libusb: split up setup_new_device()
  > Check for stack overflow in paflof engine
  > Clean up pending packet variable in ipv4 code
  > Fix tracking of pending outgoing packets when handling ARP replies

Signed-off-by: default avatarAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: default avatarDavid Gibson <david@gibson.dropbear.id.au>
      4f7ab0cd
  17. Feb 11, 2016
  19. Feb 04, 2016
  21. Jan 05, 2016
  23. Dec 01, 2015
  25. Nov 11, 2015
  27. Oct 28, 2015
  29. Oct 02, 2015
  31. Sep 23, 2015
    • Alexey Kardashevskiy's avatar
      pseries: Update SLOF firmware image to qemu-slof-20150813 · 92d7a30c
      Alexey Kardashevskiy authored 
      
The changes are:
1. GPT support;
2. Much faster VGA support.

The full changelog is:
  > Add missing half word access case to _FASTRMOVE and _FASTMOVE
  > Remove unused RMOVE64 stub
  > fbuffer: Implement RFILL as an accelerated primitive
  > fbuffer: Implement MRMOVE as an accelerated primitive
  > fbuffer: Precalculate line length in bytes
  > terminal: Disable the terminal-write trace by default
  > boot: remove trailing ":" in the bootpath
  > ci: implement boot client interface
  > boot: bootpath should be complete device path
  > fbuffer: Use a smaller cursor
  > fbuffer: Improve invert-region helper
  > usb-hid: Caps is not always shift
  > cas: Increase FDT buffer size to accomodate larger ibm, cas node properties
  > README: Update with patch submittion note
  > disk-label: add support for booting from GPT FAT partition
  > disk-label: introduce helper to check fat filesystem
  > introduce 8-byte LE helpers
  > disk-label: simplify gpt-prep-partition? routine
  > fbuffer: introduce the invert-region-x helper
  > fbuffer: introduce the invert-region helper
  > fbuffer: simplify address computations in fb8-toggle-cursor

Signed-off-by: default avatarAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: default avatarDavid Gibson <david@gibson.dropbear.id.au>
      92d7a30c
  33. Sep 20, 2015
    • Alexander Graf's avatar
      PPC: E500: Update u-boot to commit 79c884d7e4 · d4574435
      Alexander Graf authored 
      
The current U-Boot binary in QEMU has a bug where it fails to support
dynamic CCSR addressing. Without this support, u-boot can not boot the
ppce500 machine anymore. This has been fixed upstream in u-boot commit
e834975b.

Update the u-boot blob we carry in QEMU to the latest u-boot upstream,
so that we can successfully run u-boot with the ppce500 machine again.

CC: qemu-stable@nongnu.org
Signed-off-by: default avatarAlexander Graf <agraf@suse.de>
Tested-by: default avatarThomas Huth <thuth@redhat.com>
      d4574435
  35. Sep 07, 2015