GIC Private Peripheral Interrupts (PPI) are defined as GIC INTID 16-31.
As in, PPI0 is INTID16 .. PPI15 is INTID31.
Arm's Base System Architecture specification (BSA) lists the mandated and
recommended private interrupt IDs by INTID, not by PPI index. But current
definitions in virt define them by PPI index, complicating cross
referencing.

Meanwhile, the PPI(x) macro counterintuitively adds 16 to the input value,
converting a PPI index to an INTID.

Resolve this by redefining the BSA-allocated PPIs by their INTIDs,
and replacing the PPI(x) macro with an INTID_TO_PPI(x) one where required.

Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20230919090229.188092-2-quic_llindhol@quicinc.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

On an attempt to access CNTPCT_EL0 from EL0 using a guest running on top
of Xen, a trap from EL2 was observed which is something not reproducible
on HW (also, Xen does not trap accesses to physical counter).

This is because gt_counter_access() checks for an incorrect bit (1
instead of 0) of CNTHCTL_EL2 if HCR_EL2.E2H is 0 and access is made to
physical counter. Refer ARM ARM DDI 0487J.a, D19.12.2:
When HCR_EL2.E2H is 0:
 - EL1PCTEN, bit [0]: refers to physical counter
 - EL1PCEN, bit [1]: refers to physical timer registers

Drop entire block "if (hcr & HCR_E2H) {...} else {...}" from EL0 case
and fall through to EL1 case, given that after fixing checking for the
correct bit, the handling is the same.

Fixes: 5bc84371 ("target/arm: Update timer access for VHE")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Message-id: 20230928094404.20802-1-michal.orzel@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Index in file_size array must be checked against num_files, because the
entries we are looking for may be absent in the PDB.

Fixes: Coverity CID 1521597
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230930235317.11469-3-viktor@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

String sign_rsds isn't terminated, so the print length must be limited.

Fixes: Coverity CID 1521598
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230930235317.11469-2-viktor@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

This replaces the comma (,) to dot (.) in the device type name
so the name can be used with the 'driver=' command line option.

Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20231003052139.199665-1-tong.ho@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

This change implements the ResettableClass interface for the device.

Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20231004055339.323833-1-tong.ho@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

This change implements the ResettableClass interface for the device.

Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20231004055713.324009-1-tong.ho@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

This change implements the ResettableClass interface for the device.

Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231003052345.199725-1-tong.ho@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

struct arm_boot_info is declared in "hw/arm/boot.h".
By including the correct header we don't need to declare
it again in "target/arm/cpu-qom.h".

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231013130214.95742-1-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The file is obviously related to the raspberrypi machine, so
it should reside in hw/arm/ instead of hw/misc/. And while we're
at it, also adjust the wildcard in MAINTAINERS so that it covers
this file, too.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231012073458.860187-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

vfio queue:

* Support for VFIODisplay migration with ramfb
* Preliminary work for IOMMUFD support

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmUvlEYACgkQUaNDx8/7
# 7KFlaw//X2053de2eTdo38/UMSzi5ACWWn2j1iGQZf/3+J2LcdlixZarZr/2DN56
# 4axmwF6+GKozt5+EnvWtgodDn6U9iyMNaAB3CGBHFHsH8uqKeZd/Ii754q4Rcmy9
# ZufBOPWm9Ff7s2MMFiAZvso75jP2wuwVEe1YPRjeJnsNSNIJ6WZfemh3Sl96yRBb
# r38uqzqetKwl7HziMMWP3yb8v+dU8A9bqI1hf1FZGttfFz3XA+pmjXKA6XxdfiZF
# AAotu5x9w86a08sAlr/qVsZFLR37oQykkXM0D840DafJDyr5fbJiq8cwfOjMw9+D
# w6+udRm5KoBWPsvb/T3dR88GRMO22PChjH9Vjl51TstMNhdTxuKJTKhhSoUFZbXV
# 8CMjwfALk5ggIOyCk1LRd04ed+9qkqgcbw1Guy5pYnyPnY/X6XurxxaxS6Gemgtn
# UvgRYhSjio+LgHLO77IVkWJMooTEPzUTty2Zxa7ldbbE+utPUtsmac9+1m2pnpqk
# 5VQmB074QnsJuvf+7HPU6vYCzQWoXHsH1UY/A0fF7MPedNUAbVYzKrdGPyqEMqHy
# xbilAIaS3oO0pMT6kUpRv5c5vjbwkx94Nf/ii8fQVjWzPfCcaF3yEfaam62jMUku
# stySaRpavKIx2oYLlucBqeKaBGaUofk13gGTQlsFs8pKCOAV7r4=
# =s0fN
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 Oct 2023 04:16:06 EDT
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg:                 aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* tag 'pull-vfio-20231018' of https://github.com/legoater/qemu

: (22 commits)
  hw/vfio: add ramfb migration support
  ramfb-standalone: add migration support
  ramfb: add migration support
  vfio/pci: Remove vfio_detach_device from vfio_realize error path
  vfio/ccw: Remove redundant definition of TYPE_VFIO_CCW
  vfio/ap: Remove pointless apdev variable
  vfio/pci: Fix a potential memory leak in vfio_listener_region_add
  vfio/common: Move legacy VFIO backend code into separate container.c
  vfio/common: Introduce a global VFIODevice list
  vfio/common: Store the parent container in VFIODevice
  vfio/common: Introduce a per container device list
  vfio/common: Move VFIO reset handler registration to a group agnostic function
  vfio/ccw: Use vfio_[attach/detach]_device
  vfio/ap: Use vfio_[attach/detach]_device
  vfio/platform: Use vfio_[attach/detach]_device
  vfio/pci: Introduce vfio_[attach/detach]_device
  vfio/common: Extract out vfio_kvm_device_[add/del]_fd
  vfio/common: Introduce vfio_container_add|del_section_window()
  vfio/common: Propagate KVM_SET_DEVICE_ATTR error if any
  vfio/common: Move IOMMU agnostic helpers to a separate file
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

* build system and Python cleanups
* fix netbsd VM build
* allow non-relocatable installs
* allow using command line options to configure qemu-ga
* target/i386: check intercept for XSETBV
* target/i386: fix CPUID_HT exposure

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUvkQQUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroM3pQgArXCsmnsjlng1chjCvKnIuVmaTYZ5
# aC9pcx7TlyM0+XWtTN0NQhFt71Te+3ioReXIQRvy5O68RNbEkiu8LXfOJhWAHbWk
# vZVtzHQuOZVizeZtUruKlDaw0nZ8bg+NI4aGLs6rs3WphEAM+tiLnZJ0BouiedKS
# e/COB/Hqjok+Ntksbfv5q7XpWjwQB0y2073vM1Mcf0ToOWFLFdL7x0SZ3hxyYlYl
# eoefp/8kbWeUWA7HuoOKmpiLIxmKnY7eXp+UCvdnEhnSce9sCxpn2nzqqLuPItTK
# V3GrJ2//+lrekPHyQvb8IjUMUrPOmzf8GadIE0tkfdHjEP72IsHk0VX81A==
# =rPte
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 Oct 2023 04:02:12 EDT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu

: (32 commits)
  configure: define "pkg-config" in addition to "pkgconfig"
  meson: add a note on why we use config_host for program paths
  meson-buildoptions: document the data at the top
  configure, meson: use command line options to configure qemu-ga
  configure: unify handling of several Debian cross containers
  configure: move environment-specific defaults to config-meson.cross
  configure: move target-specific defaults to an external machine file
  configure: remove some dead cruft
  configure: clean up PIE option handling
  configure: clean up plugin option handling
  configure, tests/tcg: simplify GDB conditionals
  tests/tcg/arm: move non-SVE tests out of conditional
  hw/remote: move stub vfu_object_set_bus_irq out of stubs/
  hw/xen: cleanup sourcesets
  configure: clean up handling of CFI option
  meson, cutils: allow non-relocatable installs
  meson: do not use set10
  meson: do not build shaders by default
  tracetool: avoid invalid escape in Python string
  tests/vm: avoid invalid escape in Python string
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Add a "VFIODisplay" subsection whenever "x-ramfb-migrate" is turned on.

Turn it off by default on machines <= 8.1 for compatibility reasons.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
[ clg:  - checkpatch fixes
  	- improved warn_report() in vfio_realize() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>

Add a "ramfb-dev" section whenever "x-migrate" is turned on. Turn it off
by default on machines <= 8.1 for compatibility reasons.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

Implementing RAMFB migration is quite straightforward. One caveat is to
treat the whole RAMFBCfg as a blob, since that's what is exposed to the
guest directly. This avoid having to fiddle with endianness issues if we
were to migrate fields individually as integers.

The devices using RAMFB will have to include ramfb_vmstate in their
migration description.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

In vfio_realize, on the error path, we currently call
vfio_detach_device() after a successful vfio_attach_device.
While this looks natural, vfio_instance_finalize also induces
a vfio_detach_device(), and it seems to be the right place
instead as other resources are released there which happen
to be a prerequisite to a successful UNSET_CONTAINER.

So let's rely on the finalize vfio_detach_device call to free
all the relevant resources.

Fixes: a28e06621170 ("vfio/pci: Introduce vfio_[attach/detach]_device")
Reported-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

No functional changes.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

No need to double-cast, call VFIO_AP_DEVICE() on DeviceState.

No functional changes.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

When there is an failure in vfio_listener_region_add() and the section
belongs to a ram device, there is an inaccurate error report which should
never be related to vfio_dma_map failure. The memory holding err is also
incrementally leaked in each failure.

Fix it by reporting the real error and free it.

Fixes: 567b5b30 ("vfio/pci: Relax DMA map errors for MMIO regions")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

Move all the code really dependent on the legacy VFIO container/group
into a separate file: container.c. What does remain in common.c is
the code related to VFIOAddressSpace, MemoryListeners, migration and
all other general operations.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

Some functions iterate over all the VFIODevices. This is currently
achieved by iterating over all groups/devices. Let's
introduce a global list of VFIODevices simplifying that scan.

This will also be useful while migrating to IOMMUFD by hiding the
group specificity.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

let's store the parent contaienr within the VFIODevice.
This simplifies the logic in vfio_viommu_preset() and
brings the benefice to hide the group specificity which
is useful for IOMMUFD migration.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

Several functions need to iterate over the VFIO devices attached to
a given container.  This is currently achieved by iterating over the
groups attached to the container and then over the devices in the group.
Let's introduce a per container device list that simplifies this
search.

Per container list is used in below functions:
vfio_devices_all_dirty_tracking
vfio_devices_all_device_dirty_tracking
vfio_devices_all_running_and_mig_active
vfio_devices_dma_logging_stop
vfio_devices_dma_logging_start
vfio_devices_query_dirty_bitmap

This will also ease the migration of IOMMUFD by hiding the group
specificity.

Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

Move the reset handler registration/unregistration to a place that is not
group specific. vfio_[get/put]_address_space are the best places for that
purpose.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

Let the vfio-ccw device use vfio_attach_device() and
vfio_detach_device(), hence hiding the details of the used
IOMMU backend.

Note that the migration reduces the following trace
"vfio: subchannel %s has already been attached" (featuring
cssid.ssid.devid) into "device is already attached"

Also now all the devices have been migrated to use the new
vfio_attach_device/vfio_detach_device API, let's turn the
legacy functions into static functions, local to container.c.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

Let the vfio-ap device use vfio_attach_device() and
vfio_detach_device(), hence hiding the details of the used
IOMMU backend.

We take the opportunity to use g_path_get_basename() which
is prefered, as suggested by
3e015d81 ("use g_path_get_basename instead of basename")

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

Let the vfio-platform device use vfio_attach_device() and
vfio_detach_device(), hence hiding the details of the used
IOMMU backend.

Drop the trace event for vfio-platform as we have similar
one in vfio_attach_device.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

We want the VFIO devices to be able to use two different
IOMMU backends, the legacy VFIO one and the new iommufd one.

Introduce vfio_[attach/detach]_device which aim at hiding the
underlying IOMMU backend (IOCTLs, datatypes, ...).

Once vfio_attach_device completes, the device is attached
to a security context and its fd can be used. Conversely
When vfio_detach_device completes, the device has been
detached from the security context.

At the moment only the implementation based on the legacy
container/group exists. Let's use it from the vfio-pci device.
Subsequent patches will handle other devices.

We also take benefit of this patch to properly free
vbasedev->name on failure.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

Introduce two new helpers, vfio_kvm_device_[add/del]_fd
which take as input a file descriptor which can be either a group fd or
a cdev fd. This uses the new KVM_DEV_VFIO_FILE VFIO KVM device group,
which aliases to the legacy KVM_DEV_VFIO_GROUP.

vfio_kvm_device_[add/del]_group then call those new helpers.

Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

Introduce helper functions that isolate the code used for
VFIO_SPAPR_TCE_v2_IOMMU.

Those helpers hide implementation details beneath the container object
and make the vfio_listener_region_add/del() implementations more
readable. No code change intended.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

In the VFIO_SPAPR_TCE_v2_IOMMU container case, when
KVM_SET_DEVICE_ATTR fails, we currently don't propagate the
error as we do on the vfio_spapr_create_window() failure
case. Let's align the code. Take the opportunity to
reword the error message and make it more explicit.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

Move low-level iommu agnostic helpers to a separate helpers.c
file. They relate to regions, interrupts, device/region
capabilities and etc.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

Since commit da3c22c7 ("linux-headers: Update to Linux v6.6-rc1"),
linux-headers has been updated to v6.6-rc1.

As previous patch added iommufd.h to update-linux-headers.sh,
run the script again against TAG v6.6-rc1 to have iommufd.h included.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

Update the script to import iommufd.h

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

Meson used to allow both "pkgconfig" and "pkg-config" entries in machine
files; the former was used for dependency lookup and the latter
was used as return value for "find_program('pkg-config')", which is a less
common use-case and one that QEMU does not need.

This inconsistency is going to be fixed by Meson 1.3, which will deprecate
"pkgconfig" in favor of "pkg-config" (the less common one, but it makes
sense because it matches the name of the binary). For backward
compatibility it is still allowed to define both, so do that in the
configure-generated machine file.

Related: https://github.com/mesonbuild/meson/pull/12385


Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Preserve the functionality of the environment variables, but
allow using the command line instead.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The Debian and GNU architecture names match very often, even though
there are common cases (32-bit Arm or 64-bit x86) where they do not
and other cases in which the GNU triplet is actually a quadruplet.
But it is still possible to group the common case into a single
case inside probe_target_compiler.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Store the -Werror and SMBD defaults in the machine file, which still allows
them to be overridden on the command line and enables automatic parsing
of the related options.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>