* Add some missing gitlab-CI job dependencies
* Re-enable "make check SPEED=slow"
* Improve the gitlab-pipeline-status script
* Clean up inclusing of qtest.h headers
* Improve libqos/qgraph documentation
* Fix downloading problem in the acceptance tests
* Remove deprecated target tilegx
* Add new bsd-user maintainers

# gpg: Signature made Tue 09 Mar 2021 10:27:29 GMT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/thuth-gitlab/tags/pull-request-2021-03-09:
  bsd-user: Add new maintainers
  Remove deprecated target tilegx
  Acceptance Tests: restore filtering of tests by target arch
  Acceptance Tests: restore downloading of VM images
  docs/devel/qgraph: improve qgraph documentation
  libqos/qgraph: format qgraph comments for sphinx documentation
  scripts/ci/gitlab-pipeline-status: give more info when pipeline not found
  scripts/ci/gitlab-pipeline-status: give more information on failures
  scripts/ci/gitlab-pipeline-status: split utlity function for HTTP GET
  meson: Re-enable the possibility to run "make check SPEED=slow"
  docker: OpenSBI build job depends on OpenSBI container
  docker: EDK2 build job depends on EDK2 container
  docker: Alpine build job depends on Alpine container
  qtest: delete superfluous inclusions of qtest.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * Add new mps3-an547 board
 * target/arm: Restrict v7A TCG cpus to TCG accel
 * Implement a Xilinx CSU DMA model
 * hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt()

# gpg: Signature made Wed 10 Mar 2021 13:56:20 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210310: (54 commits)
  hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt()
  hw/timer/renesas_tmr: Prefix constants for CSS values with CSS_
  hw/ssi: xilinx_spips: Remove DMA related dead codes from zynqmp_spips
  hw/ssi: xilinx_spips: Clean up coding convention issues
  hw/arm: xlnx-zynqmp: Connect a Xilinx CSU DMA module for QSPI
  hw/arm: xlnx-zynqmp: Clean up coding convention issues
  hw/dma: Implement a Xilinx CSU DMA model
  target/arm: Restrict v7A TCG cpus to TCG accel
  tests/qtest/sse-timer-test: Test counter scaling changes
  tests/qtest/sse-timer-test: Test the system timer
  tests/qtest/sse-timer-test: Add simple test of the SSE counter
  docs/system/arm/mps2.rst: Document the new mps3-an547 board
  hw/arm/mps2-tz: Add new mps3-an547 board
  hw/arm/mps2-tz: Make initsvtor0 setting board-specific
  hw/arm/mps2-tz: Support running APB peripherals on different clock
  hw/misc/mps2-scc: Implement changes for AN547
  hw/misc/mps2-fpgaio: Support AN547 DBGCTRL register
  hw/misc/mps2-fpgaio: Fold counters subsection into main vmstate
  hw/arm/mps2-tz: Make UART overflow IRQ board-specific
  hw/arm/armsse: Add SSE-300 support
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The read_tcnt() function calculates the TCNT register values for the
two channels of the timer module; it sets these up in the local
tcnt[] array, and eventually returns either one or both of them,
depending on whether the access is 8 or 16 bits.  However, not all of
the code paths through this function set both elements of this array:
if the guest has programmed the TCCR.CSS register fields to values
which are either documented as not to be used or which QEMU does not
implement, then the function will return uninitialized data.  (This
was spotted by Coverity.)

Add the missing CSS cases to this code, so that we return a
consistent value instead of uninitialized data, and so the code
structure indicates what's happening.

Fixes: CID 1429976
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210219223241.16344-3-peter.maydell@linaro.org

The #defines INTERNAL and CASCADING represent different possible
values for the TCCR.CSS register field; prefix them with CSS_ to make
this more obvious, before we add more defines to represent the
other possible values of the field in the next commit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210219223241.16344-2-peter.maydell@linaro.org

Now that the Xilinx CSU DMA model is implemented, the existing
DMA related dead codes in the ZynqMP QSPI are useless and should
be removed. The maximum register number is also updated to only
include the QSPI registers.

Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210303135254.3970-6-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

There are some coding convention warnings in xilinx_spips.c,
as reported by:

  $ ./scripts/checkpatch.pl hw/ssi/xilinx_spips.c

Let's clean them up.

Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210303135254.3970-5-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Add a Xilinx CSU DMA module to ZynqMP SoC, and connent the stream
link of GQSPI to CSU DMA.

Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210303135254.3970-4-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

There are some coding convention warnings in xlnx-zynqmp.c and
xlnx-zynqmp.h, as reported by:

  $ ./scripts/checkpatch.pl include/hw/arm/xlnx-zynqmp.h
  $ ./scripts/checkpatch.pl hw/arm/xlnx-zynqmp.c

Let's clean them up.

Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210303135254.3970-3-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Block layer patches:

- qemu-storage-daemon: add --pidfile option
- qemu-storage-daemon: CLI error messages include the option name now
- vhost-user-blk export: Misc fixes
- docs: Improvements for qemu-storage-daemon documentation
- parallels: load bitmap extension
- backup-top: Don't crash on post-finalize accesses
- Improve error messages related to node-name options
- iotests improvements

# gpg: Signature made Mon 08 Mar 2021 17:01:41 GMT
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (30 commits)
  blockdev: Clarify error messages pertaining to 'node-name'
  block: Clarify error messages pertaining to 'node-name'
  docs: qsd: Explain --export nbd,name=... default
  MAINTAINERS: update parallels block driver
  iotests: add parallels-read-bitmap test
  iotests.py: add unarchive_sample_image() helper
  parallels: support bitmap extension for read-only mode
  block/parallels: BDRVParallelsState: add cluster_size field
  parallels.txt: fix bitmap L1 table description
  qcow2-bitmap: make bytes_covered_by_bitmap_cluster() public
  block/export: port virtio-blk read/write range check
  block/export: port virtio-blk discard/write zeroes input validation
  block/export: fix vhost-user-blk export sector number calculation
  block/export: use VIRTIO_BLK_SECTOR_BITS
  block/export: fix blk_size double byteswap
  libqtest: add qtest_remove_abrt_handler()
  libqtest: add qtest_kill_qemu()
  libqtest: add qtest_socket_server()
  vhost-user-blk: fix blkcfg->num_queues endianness
  docs: replace insecure /tmp examples in qsd docs
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qemu-sparc queue

# gpg: Signature made Sun 07 Mar 2021 12:07:13 GMT
# gpg:                using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg:                issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-20210307: (42 commits)
  esp: add support for unaligned accesses
  esp: implement non-DMA transfers in PDMA mode
  esp: add trivial implementation of the ESP_RFLAGS register
  esp: convert cmdbuf from array to Fifo8
  esp: convert ti_buf from array to Fifo8
  esp: transition to message out phase after SATN and stop command
  esp: add maxlen parameter to get_cmd()
  esp: raise interrupt after every non-DMA byte transferred to the FIFO
  esp: remove old deferred command completion mechanism
  esp: defer command completion interrupt on incoming data transfers
  esp: latch individual bits in ESP_RINTR register
  esp: implement FIFO flush command
  esp: add 4 byte PDMA read and write transfers
  esp: remove pdma_origin from ESPState
  esp: use FIFO for PDMA transfers between initiator and device
  esp: fix PDMA target selection
  esp: rename get_cmd_cb() to esp_select()
  esp: remove CMD pdma_origin
  esp: use in-built TC to determine PDMA transfer length
  esp: use ti_wptr/ti_rptr to manage the current FIFO position for PDMA
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Add hexagon to include/exec/poison.h
Two Coverity fixes for target/hexagon/

# gpg: Signature made Sun 07 Mar 2021 01:37:05 GMT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-hex-20210306:
  target/hexagon/opcodes: Add missing varargs cleanup
  target/hexagon: Fix shift amount check in fASHIFTL/fLSHIFTR
  exec: Poison Hexagon target-specific definitions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The FreeBSD project has a number of enhancements to bsd-user. These changes have
evolved over the past 10 year, and aren't currently updated to the latest
version of qemu due to fluxuations in staffing causing us to fall behind in the
past. We're working on porting all the changes forward and contributing all the
changes back to qemu. Add myself as maintainer and Kyle Evans as a reviewer for
changes. In addition, add a pointer to our github repo in the interim while this
work is ongoing.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210308224023.75187-1-imp@bsdimp.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

TILE-Gx was only implemented in linux-user mode, but support for this CPU
was removed from the upstream Linux kernel in 2018, and it has also been
dropped from glibc, so there is no new Linux development taking place with
this architecture. For running the old binaries, users can simply use older
versions of QEMU.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210224183952.80463-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Previously, tests were being filtered by the matching target
architectures to be built.  The benefit, compared to the current
situation, is a more concise test job that won't show tests canceled
because a matching QEMU binary was not found (those tests won't even
be attempted).

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210225232122.1254879-3-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

The "get-vm-images" target defined in tests/Makefile.include is a
prerequisite for "check-acceptance", so that those files get
downloaded before the Avocado job even starts.

It looks like on c401c058 a TARGETS variable was introduced with a
different content than it was previously coming from the main
Makefile.  From that point on, the "get-vm-images" succeed without
doing anything because there was no matching architecture to download.

This restores the download of images (that match targets to be built)
before the job starts, eliminating downloads and their associated
failures during the tests.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210225232122.1254879-2-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Improve current qgraph documentation with a more concrete example
and clearer motivation.

This patch depends on the previous serie
"libqos/qgraph: format qgraph comments for sphinx documentation"

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210301092432.20342-1-eesposit@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Change documentation style and fix minor typos in tests/qtest/libqos/qgraph.h
to automatically generate sphinx documentation in docs/devel/qgraph.rst

The mechanism explanation that once was in qgraph.h is now moved to qgraph.rst

There is no functional change intended.

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210308073240.6363-1-eesposit@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

This includes both input parameters (project id and commit) in the
message so to make it easier to debug returned API calls.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210222193240.921250-4-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

When an HTTP GET request fails, it's useful to go beyond the "not
successful" message, and show the code returned by the server.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210222193240.921250-3-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

This simply splits out the code that does an HTTP GET so that it
can be used for other API requests.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210222193240.921250-2-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

"make check SPEED=slow" got lost in the conversion of the build
system to meson - the tests were always running in "quick" mode.
Fix it by passing the "-m" parameter to the test harness at the
right spot in scripts/mtest2make.py.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210218172313.2217440-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Add missing dependency build-opensbi -> docker-opensbi.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210303130646.1494015-4-philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Add missing dependency build-edk2 -> docker-edk2.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210303130646.1494015-3-philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Add missing dependency build-system-alpine -> amd64-alpine-container.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210303130646.1494015-2-philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

There are 23 files that include the "sysemu/qtest.h",
but they do not use any qtest functions.

Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210226081414.205946-1-kuhn.chenqun@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

TCI build fix and cleanup
Streamline tb_lookup
Fixes for tcg/aarch64

# gpg: Signature made Sat 06 Mar 2021 21:34:46 GMT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20210306: (27 commits)
  accel/tcg: Precompute curr_cflags into cpu->tcg_cflags
  include/exec: lightly re-arrange TranslationBlock
  accel/tcg: drop the use of CF_HASH_MASK and rename params
  accel/tcg: move CF_CLUSTER calculation to curr_cflags
  accel/tcg: rename tb_lookup__cpu_state and hoist state extraction
  tcg/tci: Merge mov, not and neg operations
  tcg/tci: Merge bswap operations
  tcg/tci: Merge extension operations
  tcg/tci: Merge basic arithmetic operations
  tcg/tci: Reduce use of tci_read_r64
  tcg/tci: Remove tci_read_r32s
  tcg/tci: Remove tci_read_r32
  tcg/tci: Remove tci_read_r16s
  tcg/tci: Remove tci_read_r16
  tcg/tci: Remove tci_read_r8s
  tcg/tci: Remove tci_read_r8
  tcg/tci: Merge identical cases in generation (load/store opcodes)
  tcg/tci: Merge identical cases in generation (conditional opcodes)
  tcg/tci: Merge identical cases in generation (deposit opcode)
  tcg/tci: Merge identical cases in generation (exchange opcodes)
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ZynqMP QSPI supports SPI transfer using DMA mode, but currently this
is unimplemented. When QSPI is programmed to use DMA mode, QEMU will
crash. This is observed when testing VxWorks 7.

This adds a Xilinx CSU DMA model and the implementation is based on
https://github.com/Xilinx/qemu/blob/master/hw/dma/csu_stream_dma.c

.
The DST part of the model is verified along with ZynqMP GQSPI model.

Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210303135254.3970-2-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

KVM requires the target cpu to be at least ARMv8 architecture
(support on ARMv7 has been dropped in commit 82bf7ae8:
"target/arm: Remove KVM support for 32-bit Arm hosts").

A KVM-only build won't be able to run TCG cpus, move the
v7A CPU definitions to cpu_tcg.c.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210306151801.2388182-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Test that when we change the scaling of the system counter that the
system timer responds appropriately.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Add a test which tests various parts of the functionality of the
SSE system timer.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Add a simple qtest to exercise the new system counter device in the
SSE-300.

We'll add tests of the system timer device here too, so this includes
scaffolding (register definitions, etc) for those.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210219144617.4782-45-peter.maydell@linaro.org

Add brief documentation of the new mps3-an547 board.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210219144617.4782-44-peter.maydell@linaro.org

Add support for the mps3-an547 board; this is an SSE-300 based
FPGA image that runs on the MPS3.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-43-peter.maydell@linaro.org

The AN547 configures the SSE-300 with a different initsvtor0
setting from its default; make this a board-specific setting.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-42-peter.maydell@linaro.org

The AN547 runs the APB peripherals outside the SSE-300 on a different
and slightly slower clock than it runs the SSE-300 with.  Support
making the APB peripheral clock frequency board-specific.  (For our
implementation only the UARTs actually take a clock.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-41-peter.maydell@linaro.org

Implement the minor changes required to the SCC block for AN547 images:
 * CFG2 and CFG5 exist (like AN524)
 * CFG3 is reserved (like AN524)
 * CFG0 bit 1 is CPU_WAIT; we don't implement it, but note this
   in the TODO comment

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-40-peter.maydell@linaro.org

For the AN547 image, the FPGAIO block has an extra DBGCTRL register,
which is used to control the SPNIDEN, SPIDEN, NPIDEN and DBGEN inputs
to the CPU.  These signals control when the CPU permits use of the
external debug interface.  Our CPU models don't implement the
external debug interface, so we model the register as
reads-as-written.

Implement the register, with a property defining whether it is
present, and allow mps2-tz boards to specify that it is present.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-39-peter.maydell@linaro.org

We've already broken migration compatibility for all the MPS
boards, so we might as well take advantage of this to simplify
the vmstate for the FPGAIO device by folding the counters
subsection into the main vmstate description.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-38-peter.maydell@linaro.org

The AN547 puts the combined UART overflow IRQ at 48, not 47 like the
other images. Make this setting board-specific.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-37-peter.maydell@linaro.org

Now we have sufficiently parameterised the code, we can add SSE-300
support by adding a new entry to the armsse_variants[] array.

Note that the main watchdog (unlike the s32k watchdog) in the SSE-300
is a different device from the CMSDK watchdog; we don't have a model
of it so we leave it as a TYPE_UNIMPLEMENTED_DEVICE stub.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-36-peter.maydell@linaro.org