Skip to content
Snippets Groups Projects
Select Git revision
  • feature/libtcg-rebase default protected
1 result
Search by author
  • Any Author
  • Anton Anton anjo
1 author
  1. Feb 09, 2022
  3. Feb 08, 2022
    • Peter Maydell's avatar
      Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220208' into staging · 0a301624
      Peter Maydell authored 
      
target-arm queue:
 * Fix handling of SVE ZCR_LEN when using VHE
 * xlnx-zynqmp: 'Or' the QSPI / QSPI DMA IRQs
 * Don't ever enable PSCI when booting guest in EL3
 * Adhere to SMCCC 1.3 section 5.2
 * highbank: Fix issues with booting SMP
 * midway: Fix issues booting at all
 * boot: Drop existing dtb /psci node rather than retaining it
 * versal-virt: Always call arm_load_kernel()
 * force flag recalculation when messing with DAIF
 * hw/timer/armv7m_systick: Update clock source before enabling timer
 * hw/arm/smmuv3: Fix device reset
 * hw/intc/arm_gicv3_its: refactorings and minor bug fixes
 * hw/sensor: Add lsm303dlhc magnetometer device

# gpg: Signature made Tue 08 Feb 2022 11:39:15 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20220208: (39 commits)
  hw/sensor: Add lsm303dlhc magnetometer device
  hw/intc/arm_gicv3_its: Split error checks
  hw/intc/arm_gicv3_its: Don't allow intid 1023 in MAPI/MAPTI
  hw/intc/arm_gicv3_its: In MAPC with V=0, don't check rdbase field
  hw/intc/arm_gicv3_its: Drop TableDesc and CmdQDesc valid fields
  hw/intc/arm_gicv3_its: Make update_ite() use ITEntry
  hw/intc/arm_gicv3_its: Pass ITE values back from get_ite() via a struct
  hw/intc/arm_gicv3_its: Avoid nested ifs in get_ite()
  hw/intc/arm_gicv3_its: Fix address calculation in get_ite() and update_ite()
  hw/intc/arm_gicv3_its: Pass CTEntry to update_cte()
  hw/intc/arm_gicv3_its: Keep CTEs as a struct, not a raw uint64_t
  hw/intc/arm_gicv3_its: Pass DTEntry to update_dte()
  hw/intc/arm_gicv3_its: Keep DTEs as a struct, not a raw uint64_t
  hw/intc/arm_gicv3_its: Use address_space_map() to access command queue packets
  hw/arm/smmuv3: Fix device reset
  hw/timer/armv7m_systick: Update clock source before enabling timer
  arm: force flag recalculation when messing with DAIF
  hw/arm: versal-virt: Always call arm_load_kernel()
  hw/arm/boot: Drop existing dtb /psci node rather than retaining it
  hw/arm/boot: Drop nb_cpus field from arm_boot_info
  ...

Signed-off-by: default avatarPeter Maydell <peter.maydell@linaro.org>
      0a301624
    • Kevin Townsend's avatar
      hw/sensor: Add lsm303dlhc magnetometer device · 4fd1ebb1
      Kevin Townsend authored 
      
This commit adds emulation of the magnetometer on the LSM303DLHC.
It allows the magnetometer's X, Y and Z outputs to be set via the
mag-x, mag-y and mag-z properties, as well as the 12-bit
temperature output via the temperature property. Sensor can be
enabled with 'CONFIG_LSM303DLHC_MAG=y'.

Signed-off-by: default avatarKevin Townsend <kevin.townsend@linaro.org>
Message-id: 20220130095032.35392-1-kevin.townsend@linaro.org
Reviewed-by: default avatarPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: default avatarPeter Maydell <peter.maydell@linaro.org>
      4fd1ebb1
    • Peter Maydell's avatar
      hw/intc/arm_gicv3_its: Split error checks · d7d359c4
      Peter Maydell authored 
      
In most of the ITS command processing, we check different error
possibilities one at a time and log them appropriately. In
process_mapti() and process_mapd() we have code which checks
multiple error cases at once, which means the logging is less
specific than it could be. Split those cases up.

Signed-off-by: default avatarPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: default avatarRichard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-14-peter.maydell@linaro.org
      d7d359c4
    • Peter Maydell's avatar
      hw/intc/arm_gicv3_its: Don't allow intid 1023 in MAPI/MAPTI · 33302414
      Peter Maydell authored 
      
When handling MAPI/MAPTI, we allow the supplied interrupt ID to be
either 1023 or something in the valid LPI range.  This is a mistake:
only a real valid LPI is allowed.  (The general behaviour of the ITS
is that most interrupt ID fields require a value in the LPI range;
the exception is that fields specifying a doorbell value, which are
all in GICv4 commands, allow also 1023 to mean "no doorbell".)
Remove the condition that incorrectly allows 1023 here.

Signed-off-by: default avatarPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: default avatarRichard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-13-peter.maydell@linaro.org
      33302414
    • Peter Maydell's avatar
      hw/intc/arm_gicv3_its: In MAPC with V=0, don't check rdbase field · 84d43d2e
      Peter Maydell authored 
      
In the MAPC command, if V=0 this is a request to delete a collection
table entry and the rdbase field of the command packet will not be
used.  In particular, the specification says that the "UNPREDICTABLE
if rdbase is not valid" only applies for V=1.

We were doing a check-and-log-guest-error on rdbase regardless of
whether the V bit was set, and also (harmlessly but confusingly)
storing the contents of the rdbase field into the updated collection
table entry.  Update the code so that if V=0 we don't check or use
the rdbase field value.

Signed-off-by: default avatarPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: default avatarRichard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-12-peter.maydell@linaro.org
      84d43d2e
    • Peter Maydell's avatar
      hw/intc/arm_gicv3_its: Drop TableDesc and CmdQDesc valid fields · da4680ce
      Peter Maydell authored 
      
Currently we track in the TableDesc and CmdQDesc structs the state of
the GITS_BASER<n> and GITS_CBASER Valid bits.  However we aren't very
consistent abut checking the valid field: we test it in update_cte()
and update_dte(), but not anywhere else we look things up in tables.

The GIC specification says that it is UNPREDICTABLE if a guest fails
to set any of these Valid bits before enabling the ITS via
GITS_CTLR.Enabled.  So we can choose to handle Valid == 0 as
equivalent to a zero-length table.  This is in fact how we're already
catching this case in most of the table-access paths: when Valid is 0
we leave the num_entries fields in TableDesc or CmdQDesc set to zero,
and then the out-of-bounds check "index >= num_entries" that we have
to do anyway before doing any of these table lookups will always be
true, catching the no-valid-table case without any extra code.

So we can remove the checks on the valid field from update_cte()
and update_dte(): since these happen after the bounds check there
was never any case when the test could fail. That means the valid
fields would be entirely unused, so just remove them.

Signed-off-by: default avatarPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: default avatarRichard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-11-peter.maydell@linaro.org
      da4680ce
    • Peter Maydell's avatar
      hw/intc/arm_gicv3_its: Make update_ite() use ITEntry · 7eb54267
      Peter Maydell authored 
      
Make the update_ite() struct use the new ITEntry struct, so that
callers don't need to assemble the in-memory ITE data themselves, and
only get_ite() and update_ite() need to care about that in-memory
layout.  We can then drop the no-longer-used IteEntry struct
definition.

Signed-off-by: default avatarPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: default avatarRichard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-10-peter.maydell@linaro.org
      7eb54267
    • Peter Maydell's avatar
      hw/intc/arm_gicv3_its: Pass ITE values back from get_ite() via a struct · 244194fe
      Peter Maydell authored 
      
In get_ite() we currently return the caller some of the fields of an
Interrupt Table Entry via a set of pointer arguments, and validate
some of them internally (interrupt type and valid bit) to return a
simple true/false 'valid' indication. Define a new ITEntry struct
which has all the fields that the in-memory ITE has, and bring the
get_ite() function in to line with get_dte() and get_cte().

This paves the way for handling virtual interrupts, which will want
a different subset of the fields in the ITE. Handling them under
the old "lots of pointer arguments" scheme would have meant a
confusingly large set of arguments for this function.

The new struct ITEntry is obviously confusably similar to the
existing IteEntry struct, whose fields are the raw 12 bytes
of the in-memory ITE. In the next commit we will make update_ite()
use ITEntry instead of IteEntry, which will allow us to delete
the IteEntry struct and remove the confusion.

Signed-off-by: default avatarPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: default avatarRichard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-9-peter.maydell@linaro.org
      244194fe
    • Peter Maydell's avatar
      hw/intc/arm_gicv3_its: Avoid nested ifs in get_ite() · 2954b93f
      Peter Maydell authored 
      
The get_ite() code has some awkward nested if statements; clean
them up by returning early if the memory accesses fail.

Signed-off-by: default avatarPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: default avatarRichard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-8-peter.maydell@linaro.org
      2954b93f
    • Peter Maydell's avatar
      hw/intc/arm_gicv3_its: Fix address calculation in get_ite() and update_ite() · a1ce993d
      Peter Maydell authored 
      
In get_ite() and update_ite() we work with a 12-byte in-guest-memory
table entry, which we intend to handle as an 8-byte value followed by
a 4-byte value.  Unfortunately the calculation of the address of the
4-byte value is wrong, because we write it as:

 table_base_address + (index * entrysize) + 4
(obfuscated by the way the expression has been written)

when it should be + 8.  This bug meant that we overwrote the top
bytes of the 8-byte value with the 4-byte value.  There are no
guest-visible effects because the top half of the 8-byte value
contains only the doorbell interrupt field, which is used only in
GICv4, and the two bugs in the "write ITE" and "read ITE" codepaths
cancel each other out.

We can't simply change the calculation, because this would break
migration of a (TCG) guest from the old version of QEMU which had
in-guest-memory interrupt tables written using the buggy version of
update_ite().  We must also at the same time change the layout of the
fields within the ITE_L and ITE_H values so that the in-memory
locations of the fields we care about (VALID, INTTYPE, INTID and
ICID) stay the same.

Signed-off-by: default avatarPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: default avatarRichard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-7-peter.maydell@linaro.org
      a1ce993d
    • Peter Maydell's avatar
      hw/intc/arm_gicv3_its: Pass CTEntry to update_cte() · 06985cc3
      Peter Maydell authored 
      
Make update_cte() take a CTEntry struct rather than all the fields
of the new CTE as separate arguments.

This brings it into line with the update_dte() API.

Signed-off-by: default avatarPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: default avatarRichard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-6-peter.maydell@linaro.org
      06985cc3
    • Peter Maydell's avatar
      hw/intc/arm_gicv3_its: Keep CTEs as a struct, not a raw uint64_t · d37cf49b
      Peter Maydell authored 
      
In the ITS, a CTE is an entry in the collection table, which contains
multiple fields. Currently the function get_cte() which reads one
entry from the device table returns a success/failure boolean and
passes back the raw 64-bit integer CTE value via a pointer argument.
We then extract fields from the CTE as we need them.

Create a real C struct with the same fields as the CTE, and
populate it in get_cte(), so that that function and update_cte()
are the only ones which need to care about the in-guest-memory
format of the CTE.

This brings get_cte()'s API into line with get_dte().

Signed-off-by: default avatarPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: default avatarRichard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-5-peter.maydell@linaro.org
      d37cf49b
    • Peter Maydell's avatar
      hw/intc/arm_gicv3_its: Pass DTEntry to update_dte() · 22d62b08
      Peter Maydell authored 
      
Make update_dte() take a DTEntry struct rather than all the fields of
the new DTE as separate arguments.

Signed-off-by: default avatarPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: default avatarRichard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-4-peter.maydell@linaro.org
      22d62b08