# gpg: Signature made Mon 15 Mar 2021 08:42:25 GMT
# gpg:                using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  net: Do not fill legacy info_str for backends
  hmp: Use QAPI NetdevInfo in hmp_info_network
  net: Move NetClientState.info_str to dynamic allocations
  tests: Add tests for query-netdev command
  qapi: net: Add query-netdev command
  pvrdma: wean code off pvrdma_ring.h kernel header
  lan9118: switch to use qemu_receive_packet() for loopback
  cadence_gem: switch to use qemu_receive_packet() for loopback
  pcnet: switch to use qemu_receive_packet() for loopback
  rtl8139: switch to use qemu_receive_packet() for loopback
  tx_pkt: switch to use qemu_receive_packet_iov() for loopback
  sungem: switch to use qemu_receive_packet() for loopback
  msf2-mac: switch to use qemu_receive_packet() for loopback
  dp8393x: switch to use qemu_receive_packet() for loopback packet
  e1000: switch to use qemu_receive_packet() for loopback
  net: introduce qemu_receive_packet()
  e1000: fail early for evil descriptor
  net: validate that ids are well formed
  net: Fix build error when DEBUG_NET is on
  virtio-net: calculating proper msix vectors on init

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/core/machine.c

Pull request

# gpg: Signature made Mon 15 Mar 2021 09:50:58 GMT
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha-gitlab/tags/block-pull-request:
  virtio-blk: Respect discard granularity

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

AVR patches queue

- Only reset 'interrupt_request' mask once all interrupts executed
- Documentation and typo fixes

# gpg: Signature made Sun 14 Mar 2021 23:45:34 GMT
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd/tags/avr-20210315:
  target/avr: Fix interrupt execution
  target/avr: Fix some comment spelling errors
  hw/avr/arduino: List board schematic links
  hw/misc/led: Add yellow LED

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

- Added triboard with tc27x_soc
- Cleaned up get_physical_address()
- Fixed corner case bugs in OPC2_32_RRPW_IMASK and OPC2_32_RRPW_IMASK
  insns

# gpg: Signature made Sun 14 Mar 2021 13:53:11 GMT
# gpg:                using RSA key 6E636A7E83F2DD0CFA6E6E370AD2C6396B69CA14
# gpg:                issuer "kbastian@mail.uni-paderborn.de"
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>" [full]
# Primary key fingerprint: 6E63 6A7E 83F2 DD0C FA6E  6E37 0AD2 C639 6B69 CA14

* remotes/bkoppelmann2/tags/pull-tricore-20210314:
  target/tricore: Fix OPC2_32_RRPW_EXTR for width=0
  target/tricore: Fix imask OPC2_32_RRPW_IMASK for r3+1 == r2
  tricore: fixed faulty conditions for extr and imask
  target/tricore: Remove unused definitions
  target/tricore: Pass MMUAccessType to get_physical_address()
  target/tricore: Replace magic value by MMU_DATA_LOAD definition
  tricore: added triboard with tc27x_soc

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Report the configured granularity for discard operation to the
guest. If this is not set use the block size.

Since until now we have ignored the configured discard granularity
and always reported the block size, let's add
'report-discard-granularity' property and disable it for older
machine types to avoid migration issues.

Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210225001239.47046-1-akihiko.odaki@gmail.com>

As we use QAPI NetClientState->stored_config to store and get information
about backend network devices, we can drop fill of legacy field info_str
for them.

We still use info_str field for NIC and hubports, so we can not completely
remove it.

Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Replace usage of legacy field info_str of NetClientState for backend
network devices with QAPI NetdevInfo stored_config that already used
in QMP query-netdev.

This change increases the detail of the "info network" output and takes
a more general approach to composing the output.

NIC and hubports still use legacy info_str field.

Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>

The info_str field of the NetClientState structure is static and has a size
of 256 bytes. This amount is often unclaimed, and the field itself is used
exclusively for HMP "info network".

The patch translates info_str to dynamic memory allocation.

This action is also allows us to painlessly discard usage of this field
for backend devices.

Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>

A simply qtest that checks for correct number of netdevs in the response
of the query-netdev.

Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

The query-netdev command is used to get the configuration of the current
network device backends (netdevs).
This is the QMP analog of the HMP command "info network" but only for
netdevs (i.e. excluding NIC and hubports).

The query-netdev command returns an array of objects of the NetdevInfo
type, which are an extension of Netdev type. It means that response can
be used for netdev-add after small modification. This can be useful for
recreate the same netdev configuration.

Information about the network device is filled in when it is created or
modified and is available through the NetClientState->stored_config.

Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

The pvrdma code relies on the pvrdma_ring.h kernel header for some
basic ring buffer handling. The content of that header isn't very
exciting, but contains some (q)atomic_*() invocations that (a)
cause manual massaging when doing a headers update, and (b) are
an indication that we probably should not be importing that header
at all.

Let's reimplement the ring buffer handling directly in the pvrdma
code instead. This arguably also improves readability of the code.

Importing the header can now be dropped.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Tested-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

This patch switches to use qemu_receive_packet() which can detect
reentrancy and return early.

This is intended to address CVE-2021-3416.

Cc: Prasad J Pandit <ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>

This patch switches to use qemu_receive_packet() which can detect
reentrancy and return early.

This is intended to address CVE-2021-3416.

Cc: Prasad J Pandit <ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>

This patch switches to use qemu_receive_packet() which can detect
reentrancy and return early.

This is intended to address CVE-2021-3416.

Cc: Prasad J Pandit <ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Buglink: https://bugs.launchpad.net/qemu/+bug/1917085


Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>

This patch switches to use qemu_receive_packet() which can detect
reentrancy and return early.

This is intended to address CVE-2021-3416.

Cc: Prasad J Pandit <ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Buglink: https://bugs.launchpad.net/qemu/+bug/1910826


Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>

This patch switches to use qemu_receive_receive_iov() which can detect
reentrancy and return early.

This is intended to address CVE-2021-3416.

Cc: Prasad J Pandit <ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

This patch switches to use qemu_receive_packet() which can detect
reentrancy and return early.

This is intended to address CVE-2021-3416.

Cc: Prasad J Pandit <ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

This patch switches to use qemu_receive_packet() which can detect
reentrancy and return early.

This is intended to address CVE-2021-3416.

Cc: Prasad J Pandit <ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

This patch switches to use qemu_receive_packet() which can detect
reentrancy and return early.

This is intended to address CVE-2021-3416.

Cc: Prasad J Pandit <ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

This patch switches to use qemu_receive_packet() which can detect
reentrancy and return early.

This is intended to address CVE-2021-3416.

Cc: Prasad J Pandit <ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Some NIC supports loopback mode and this is done by calling
nc->info->receive() directly which in fact suppresses the effort of
reentrancy check that is done in qemu_net_queue_send().

Unfortunately we can't use qemu_net_queue_send() here since for
loopback there's no sender as peer, so this patch introduce a
qemu_receive_packet() which is used for implementing loopback mode
for a NIC with this check.

NIC that supports loopback mode will be converted to this helper.

This is intended to address CVE-2021-3416.

Cc: Prasad J Pandit <ppandit@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>

During procss_tx_desc(), driver can try to chain data descriptor with
legacy descriptor, when will lead underflow for the following
calculation in process_tx_desc() for bytes:

            if (tp->size + bytes > msh)
                bytes = msh - tp->size;

This will lead a infinite loop. So check and fail early if tp->size if
greater or equal to msh.

Reported-by: Alexander Bulekov <alxndr@bu.edu>
Reported-by: Cheolwoo Myung <cwmyung@snu.ac.kr>
Reported-by: Ruhr-University Bochum <bugs-syssec@rub.de>
Cc: Prasad J Pandit <ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>

When a network or network device is created from the command line or HMP,
QemuOpts ensures that the id passes the id_wellformed check.  However,
QMP skips this:

   $ qemu-system-x86_64 -qmp stdio -S -nic user,id=123/456
   qemu-system-x86_64: -nic user,id=123/456: Parameter id expects an identifier
   Identifiers consist of letters, digits, -, ., _, starting with a letter.

   $ qemu-system-x86_64 -qmp stdio -S
   {"execute":"qmp_capabilities"}
   {"return": {}}
   {"execute":"netdev_add", "arguments": {"type": "user", "id": "123/456"}}
   {"return": {}}

After:

   $ qemu-system-x86_64 -qmp stdio -S
   {"execute":"qmp_capabilities"}
   {"return": {}}
   {"execute":"netdev_add", "arguments": {"type": "user", "id": "123/456"}}
   {"error": {"class": "GenericError", "desc": "Parameter "id" expects an identifier"}}

Validity checks should be performed always at the bottom of the call chain,
because QMP skips all the steps above.  At the same time we know that every
call chain should go through either QMP or (for legacy) through QemuOpts.
Because the id for -net and -nic is automatically generated and not
well-formed by design, just add the check to QMP.

Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

"qemu-common.h" should be included to provide the forward declaration
of qemu_hexdump() when DEBUG_NET is on.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Currently, the default msix vectors for virtio-net-pci is 3 which is
obvious not suitable for multiqueue guest, so we depends on the user
or management tools to pass a correct vectors parameter. In fact, we
can simplifying this by calculating the number of vectors on realize.

Consider we have N queues, the number of vectors needed is 2*N + 2
(#queue pairs + plus one config interrupt and control vq). We didn't
check whether or not host support control vq because it was added
unconditionally by qemu to avoid breaking legacy guests such as Minix.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Only one interrupt is in progress at the moment.
It is only necessary to set to reset interrupt_request
after all interrupts have been executed.

Signed-off-by: Ivanov Arkasha <ivanovrkasha@gmail.com>
Message-Id: <20210312164754.18437-1-arkaisp2021@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>

I found that there are many spelling errors in the comments of qemu/target/avr.
I used spellcheck to check the spelling errors and found some errors in the folder.

Signed-off-by: Lichang Zhao <zhaolichang@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe <Mathieu-Daude&lt;f4bug@amsat.org>
Message-Id: <20201009064449.2336-12-zhaolichang@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Message-Id: <20210313165445.2113938-3-f4bug@amsat.org>

Add the yellow "lime" LED.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Message-Id: <20210313165445.2113938-2-f4bug@amsat.org>

MIPS patches queue

- Tidy up the GT64120 north bridge
- Move XBurst Media eXtension Unit code to mxu_translate.c
- Convert TX79 to decodetree

# gpg: Signature made Sat 13 Mar 2021 22:44:44 GMT
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd/tags/mips-20210313: (27 commits)
  target/mips/tx79: Salvage instructions description comment
  target/mips: Remove 'C790 Multimedia Instructions' dead code
  target/mips/tx79: Move PCPYLD / PCPYUD opcodes to decodetree
  target/mips/tx79: Move PCPYH opcode to decodetree
  target/mips/translate: Simplify PCPYH using deposit_i64()
  target/mips/translate: Make gen_rdhwr() public
  target/mips/tx79: Move MTHI1 / MTLO1 opcodes to decodetree
  target/mips/tx79: Move MFHI1 / MFLO1 opcodes to decodetree
  target/mips: Use gen_load_gpr[_hi]() when possible
  target/mips: Extract MXU code to new mxu_translate.c file
  target/mips: Introduce mxu_translate_init() helper
  target/mips: Simplify decode_opc_mxu() ifdef'ry
  target/mips: Convert decode_ase_mxu() to decodetree prototype
  target/mips: Rename decode_opc_mxu() as decode_ase_mxu()
  target/mips: Move MUL opcode check from decode_mxu() to decode_legacy()
  target/mips: Use OPC_MUL instead of OPC__MXU_MUL
  target/mips: Pass instruction opcode to decode_opc_mxu()
  target/mips: Remove unused CPUMIPSState* from MXU functions
  target/mips: Remove XBurst Media eXtension Unit dead code
  target/mips: Rewrite complex ifdef'ry
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user pull request 20210313

- fix elfload
- fix executable page of /proc/self/maps
- add preserve-arg[0] support for binfmt_misc

# gpg: Signature made Sat 13 Mar 2021 09:47:23 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-6.0-pull-request:
  linux-user/elfload: fix address calculation in fallback scenario
  linux-user/elfload: do not assume MAP_FIXED_NOREPLACE kernel support
  linux-user/elfload: munmap proper address in pgd_find_hole_fallback
  linux-user: manage binfmt-misc preserve-arg[0] flag
  linux-user: Fix executable page of /proc/self/maps

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

* Move unit and bench tests into separate directories
* Clean-up and improve gitlab-ci jobs
* Drop the non-working "check-speed" makefile target
* Minor documentation updates

# gpg: Signature made Fri 12 Mar 2021 17:18:45 GMT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/thuth-gitlab/tags/pull-request-2021-03-12:
  README: Add Documentation blurb
  MAINTAINERS: Merge the Gitlab-CI section into the generic CI section
  tests: remove "make check-speed" in favor of "make bench"
  gitlab-ci.yml: Merge check-crypto-old jobs into the build-crypto-old jobs
  gitlab-ci.yml: Merge one of the coroutine jobs with the tcg-disabled job
  gitlab-ci.yml: Add some missing dependencies to the jobs
  gitlab-ci.yml: Move build-tools-and-docs-debian to a better place
  tests: Move benchmarks into a separate folder
  tests: Move unit tests into a separate directory

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

if width was 0 we would run into the assertion:

qemu-system-tricore: tcg/tcg-op.c:217: tcg_gen_sari_i32: Assertion `arg2 >= 0 && arg2 < 32' failed.o

The instruction manual specifies undefined behaviour for this case. So
we bring this in line with the golden Infineon simlator 'tsim', which
simply writes 0 to the result in case of width=0.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

if r3+1 and r2 are the same then we would overwrite r2 with our first
move and use the wrong result for the shift. Thus we store the result
from the mov in a temp.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

According to the TC 1.3.1. Architecture Manual [1; page 174], results are
undefined, if pos + width > 32 and not 31 or if width = 0.

We found this error because of a different behavior between qemu-tricore
and the real tricore processor. For pos + width = 32, qemu-tricore did not
generate any intermediate code and ran into a different state compared to
the real hardware.

[1] https://www.infineon.com/dgdl/tc_v131_instructionset_v138.pdf?fileId=db3a304412b407950112b409b6dd0352



[BK: Add the why to the commit message]
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Andreas Konopik <andreas.konopik@efs-auto.de>
Signed-off-by: Georg Hofstetter <georg.hofstetter@efs-auto.de>
Signed-off-by: David Brenken <david.brenken@efs-auto.de>
Message-Id: <20210211115329.8984-2-david.brenken@efs-auto.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

Remove these confusing and unused definitions.

Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210127224255.3505711-4-f4bug@amsat.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

'int access_type' and ACCESS_INT are unused, drop them.
Provide the mmu_idx argument to match other targets.
'int rw' is actually the MMUAccessType, rename it.

Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210127224255.3505711-3-f4bug@amsat.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

cpu_get_phys_page_debug() uses 'DATA LOAD' MMU access type.

Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210127224255.3505711-2-f4bug@amsat.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Andreas Konopik <andreas.konopik@efs-auto.de>
Signed-off-by: David Brenken <david.brenken@efs-auto.de>
Signed-off-by: Georg Hofstetter <georg.hofstetter@efs-auto.de>
Signed-off-by: Robert Rasche <robert.rasche@efs-auto.de>
Signed-off-by: Lars Biermanski <lars.biermanski@efs-auto.de>
Message-Id: <20201109165055.10508-2-david.brenken@efs-auto.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

target-arm queue:
 * versal: Support XRAMs and XRAM controller
 * smmu: Various minor bug fixes
 * SVE emulation: fix bugs handling odd vector lengths
 * allwinner-sun8i-emac: traverse transmit queue using TX_CUR_DESC register value
 * tests/acceptance: fix orangepi-pc acceptance tests
 * hw/timer/sse-timer: Propagate eventual error in sse_timer_realize()
 * hw/arm/virt: KVM: The IPA lower bound is 32
 * npcm7xx: support MFT module
 * pl110, pxa2xx_lcd: tidy up template headers

# gpg: Signature made Sun 14 Mar 2021 13:17:43 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210314: (39 commits)
  hw/display/pxa2xx: Inline template header
  hw/display/pxa2xx: Apply whitespace-only coding style fixes to template header
  hw/display/pxa2xx: Apply brace-related coding style fixes to template header
  hw/display/pxa2xx: Remove use of BITS in pxa2xx_template.h
  hw/display/pxa2xx_lcd: Remove dest_width state field
  hw/display/pxa2xx_lcd: Remove dead code for non-32-bpp surfaces
  hw/display/pl110: Remove use of BITS from pl110_template.h
  hw/display/pl110: Pull included-once parts of template header into pl110.c
  hw/display/pl110: Remove dead code for non-32-bpp surfaces
  tests/qtest: Test PWM fan RPM using MFT in PWM test
  hw/arm: Connect PWM fans in NPCM7XX boards
  hw/arm: Add MFT device to NPCM7xx Soc
  hw/misc: Add NPCM7XX MFT Module
  hw/misc: Add GPIOs for duty in NPCM7xx PWM
  hw/arm/virt: KVM: The IPA lower bound is 32
  accel: kvm: Fix kvm_type invocation
  hw/timer/sse-timer: Propagate eventual error in sse_timer_realize()
  tests/acceptance: drop ARMBIAN_ARTIFACTS_CACHED condition for orangepi-pc, cubieboard tests
  tests/acceptance: update sunxi kernel from armbian to 5.10.16
  tests/acceptance/boot_linux_console: change URL for test_arm_orangepi_bionic_20_08
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>