The "msi-parent" property can be used on the PCI node when MSIs do not
contain sideband data (device IDs) [1]. In QEMU, MSI transactions
contain the requester ID, so the PCI node should use the "msi-map"
property instead of "msi-parent". In our case the property describes an
identity map between requester ID and sideband data.

This fixes a warning when passing the DTB generated by QEMU to dtc,
following a recent change to the GICv3 node:

  Warning (msi_parent_property): /pcie@10000000:msi-parent: property size (4) too small for cell size 1

[1] linux/Documentation/devicetree/bindings/pci/pci-msi.txt

Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220927100347.176606-4-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The GICv3 bindings requires a #msi-cells property for the ITS node. Fix
the corresponding dt-validate warning:

  interrupt-controller@8000000: msi-controller@8080000: '#msi-cells' is a required property
  From schema: linux/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml

Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220927100347.176606-3-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The devicetree specification requires a 'model' property in the root
node. Fix the corresponding dt-validate warning:

  /: 'model' is a required property
  From schema: dtschema/schemas/root-node.yaml

Use the same name for model as for compatible. The specification
recommends that 'compatible' follows the format 'manufacturer,model' and
'model' follows the format 'manufacturer,model-number'. Since our
'compatible' doesn't observe this, 'model' doesn't really need to
either.

Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220927100347.176606-2-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Connect ZynqMP's USB controllers.

Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220920081517.25401-1-frasse.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

cpu64.c has ended up in a slightly odd order -- it starts with the
initfns for most of the models-real-hardware CPUs; after that comes a
bunch of support code for SVE, SME, pauth and LPA2 properties.  Then
come the initfns for the 'host' and 'max' CPU types, and then after
that one more models-real-hardware CPU initfn, for a64fx.  (This
ordering is partly historical and partly required because a64fx needs
the SVE properties.)

Reorder the file into:
 * CPU property support functions
 * initfns for real hardware CPUs
 * initfns for host and max
 * class boilerplate

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

Our SDCR_VALID_MASK doesn't include all of the bits which are defined
by the current architecture.  In particular in commit 0b42f4fa we
forgot to add SCCD, which meant that an AArch32 guest couldn't
actually use the SCCD bit to disable counting in Secure state.

Add all the currently defined bits; we don't implement all of them,
but this makes them be reads-as-written, which is architecturally
valid and matches how we currently handle most of the others in the
mask.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220923123412.1214041-4-peter.maydell@linaro.org

In commit 01765386 we fixed a bug where we weren't correctly
bracketing changes to some registers with pmu_op_start() and
pmu_op_finish() calls for changes which affect whether the PMU
counters might be enabled.  However, we missed the case of writes to
the AArch64 MDCR_EL3 register, because (unlike its AArch32
counterpart) they are currently done directly to the CPU state struct
without going through the sdcr_write() function.

Give MDCR_EL3 a writefn which handles the PMU start/finish calls.
The SDCR writefn then simplfies to "call the MDCR_EL3 writefn after
masking off the bits which don't exist in the AArch32 register".

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220923123412.1214041-3-peter.maydell@linaro.org

In commit 01765386 we made some system register write functions
call pmu_op_start()/pmu_op_finish(). This means that they now touch
timers, so for icount to work these registers must have the ARM_CP_IO
flag set.

This fixes a bug where when icount is enabled a guest that touches
MDCR_EL3, MDCR_EL2, PMCNTENSET_EL0 or PMCNTENCLR_EL0 would cause
QEMU to print an error message and exit, for example:

[    2.495971] TCP: Hash tables configured (established 1024 bind 1024)
[    2.496213] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    2.496386] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    2.496917] NET: Registered protocol family 1
qemu-system-aarch64: Bad icount read

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220923123412.1214041-2-peter.maydell@linaro.org

* Fixes for qtests and unit tests to be more portable to non-POSIX platforms

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmMz9MQRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVUKRAAnubo/wtHqjxg/yVO68odX2LFI2koligA
# LcEAnhGkVJ/Pe/+Qo9yVbcOY6k6xfGQU3VIipqvLEwPAdSF0E43EJxlImBNm8/Zq
# MggjNoepXRhdFGULONSmSNm7HJykLH/CHdmBjPLrbpkTCwWG1gg64xP9fI+b8mGf
# vST0ADuYloLDA9J45UbC33AD+9dQsy2GeOs8X99O6ysKF3htEqMD3vBdqKiJSwgT
# 2c7UqySGECn6kMHl7iAdipRNUghSgzpUe8LcH4jP7Y1XnoB3zwC/+VrOVwFESI6y
# LVFsC8u7cEKKSYunoowfQTgHvYbCuSdrDqljy17NE5qRMziKMTnhXaQNR5wtBKNt
# HZxvc082P/QDFdBYYY3MIjB27r/I6x0t6Xl4IVwLz7bK0xfHFF8Ba2Lr57/2RTc/
# SMPDxGrMicTPnPDU/Cw5VROMmw0OC/tVpJMGo1VjVnNESo581RAMApyzkWiUyfZj
# ktKd+4ihmqrBXcZHVjKbIufa6eKNuktlkfv72dnJY4XoUlDHlbDYaVuknybZmxWK
# 9/CDVDG72s5Cqm+M47Q56IagVVZwIGrUP0u3j3h/v0rnHZehY8Qzr3SLEfeqmUb6
# nP7MP+ItZFZtMITdvXb3OtyeVuM0ZSw8kt+/evpvC9zB6FjgYl/e5FppsO0HxB/O
# PeeV43Bk270=
# =n+FM
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 28 Sep 2022 03:16:20 EDT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* tag 'pull-request-2022-09-28' of https://gitlab.com/thuth/qemu

: (37 commits)
  docs/devel: testing: Document writing portable test cases
  tests/qtest: boot-serial-test: Close the serial file before starting QEMU
  tests/qtest: vhost-user-test: Avoid using hardcoded /tmp
  tests/qtest: qmp-test: Avoid using hardcoded /tmp
  tests/qtest: pflash-cfi02-test: Avoid using hardcoded /tmp
  tests/qtest: hd-geo-test: Avoid using hardcoded /tmp
  tests/x86: Move common code to function in device-plug-test
  .gitlab-ci.d/windows.yml: Display meson test logs
  tests/qtest: migration-test: Skip running some TLS cases for win32
  tests/qtest: libqtest: Replace the call to close a socket with closesocket()
  tests/qtest: microbit-test: Fix socket access for win32
  tests/qtest: virtio-net-failover: Disable migration tests for win32
  tests/qtest: ide-test: Open file in binary mode
  tests/qtest: migration-test: Disable IO redirection for win32
  tests/qtest: bios-tables-test: Adapt the case for win32
  tests/qtest: {ahci, ide}-test: Use relative path for temporary files for win32
  tests/qtest: libqtest: Exclude the *_fds APIs for win32
  tests/qtest: libqtest: Adapt global_qtest declaration for win32
  tests/qtest: qmp-test: Skip running test_qmp_oob for win32
  tests/qtest: Build test-filter-{mirror, redirector} cases for posix only
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

linux-user pull request 20220928-v2

use 'max' instead of 'qemu32' / 'qemu64'
add  pidfd_open(), pidfd_send_signal() and pidfd_getfd()
Improve madvise(MADV_DONTNEED)
futex syscal rework
strace improvement
HP/PA fixes and improvement
Misc fixes

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmM0riISHGxhdXJlbnRA
# dml2aWVyLmV1AAoJEPMMOL0/L748gH4P/2wesXJKPMY2zQzP3Rld4iyefoPGG/Yp
# mdq59BbjO2jQMR8GBss/nl9l84cIzzkYRQIogaKsjljtZYm/OO5xRefqrzJY6apD
# eidxv20dAVjuaXHAIdGhbFlxot1ctExbZs9atB4uj5DWxfYGD6e/stoBy5/pSmr4
# M5EbGHhyrRI7tRbHGtVQVvG6AT6XGE0pT9tzT5JLaApF8UPMkgJwmez16PNWvcMm
# v8GEvKm/vEVS8CCpzLV4kfwVeo3f54VAOrEBDi29ph2Yo50IA21k8BvoRZaSp+Kn
# G6TMnnly/DkMspAs5EOVfat+kv3TziNNdDH7EnVU1vV1yTDdZgW/1204Uy/JY0Pw
# WotwAFuO9FYeHKmjY0CfnIIZZHYZpDYUOZ8M6dESD/O0EjoB8LMf5p9cbYlze4DE
# csJZCsVcz19HDv6QZXi5mvvDcJ83B2IDb8/PUAzSc0n62lXL9qjYD0wdb0QsLdAT
# I25qLDge1HCmQfCIKcaoHYvE0pDmvkF6ftuQUXLtIwtaV0Z/N5wDf2PEHikjOYHM
# gD2izz23/2wQx6KP/9ZNnCJ5QEBkEgm5wpHncsvjzSzi1uIdNlHyzJJwGTAcc5qZ
# hOeoJ7dT0D6g0BGnvOdg2W/bDx18KW65mNDxE4d+W0uzn0YmQtArk2YsnhKQNO46
# 12/0ltPFnSV/
# =DIzQ
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 28 Sep 2022 16:27:14 EDT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* tag 'linux-user-for-7.2-pull-request' of https://gitlab.com/laurent_vivier/qemu

: (37 commits)
  linux-user: Add parameters of getrandom() syscall for strace
  linux-user: Lock log around strace
  linux-user: Update print_futex_op
  linux-user: Implement PI futexes
  linux-user: Convert signal number for FUTEX_FD
  linux-user: Implement FUTEX_WAKE_BITSET
  linux-user: Sink call to do_safe_futex
  linux-user: Combine do_futex and do_futex_time64
  linux-user: Set ELF_BASE_PLATFORM for MIPS
  linux-user: Introduce stubs for ELF AT_BASE_PLATFORM
  linux-user/s390x: Save/restore fpc when handling a signal
  linux-user: Don't assume 0 is not a valid host timer_t value
  linux-user: fix bug about missing signum convert of sigqueue
  linux-user/hppa: Fix setup_sigcontext()
  linux-user/hppa: Allow PROT_GROWSUP and PROT_GROWSDOWN in mprotect()
  linux-user/hppa: Increase guest stack size to 80MB for hppa target
  linux-user/hppa: Drop stack guard page on hppa target
  linux-user/hppa: Add signal trampoline for hppa target
  linux-user: Add proper strace format strings for getdents()/getdents64()
  linux-user: Fix TARGET_PROT_SEM for XTENSA
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

VFIO updates 2022-09-27

 * Fix initial values for migration state (Kunkun Jiang)

 * Fix a use-after-free error path (Alex Williamson)

# -----BEGIN PGP SIGNATURE-----
#
# iQJPBAABCAA5FiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmMzXKwbHGFsZXgud2ls
# bGlhbXNvbkByZWRoYXQuY29tAAoJECObm247sIsiOv8QAKJstXXq92FxT+wBXt0Q
# wnMJjE1hvCHXki7FfPSRPmVgoMppWD1vhr7TajeOkidtqnX48V863/RGZfxX+oQU
# bEPPT6QaWnYhagslrRjIj4R+5O5N6rY9A2zzpG2vv1x9qv8r9WLicKvwjzinTgAp
# PyU9Ajgu2OUpD6O64iXIeD2MnfblSN3N+bBvZ7alDifFC1D8CfX9D3X76bdERC6X
# LFEenZ/3ZwZh46z1xv4v3opI2aBp9oh1gca9NKc/jUKg11AuswhmmUSmb+lVDDnt
# UBNTqgHtnGBfAMcxQ1cA6AtRvtwwneJkQC4nkUmOEWuMImUEhTQw7vcTpDFFyHzz
# dcYRjioHu15EmuHeP/W+139fnGeCDpr1/XJcJ2avUp/9oNeRDsAi4w/lEHXHv5Rm
# KHuXSIswC/6+dgvdOwRw2OlbzX5KjSVlqXJia+QexEliCxpcs8OYEJ7ZgRdFCO8t
# unWssLs7x1O40J7cngnyT8addLGwbwExrJggpG70suSQB5mMIJzNIVanUpUkzy2g
# 9kAwW3fTUXqW7O+2RYbjFUoY0yR1eHO8EExiPHyO3hxCDNjglwpM20C4M7fs3Eo6
# /1zwagtjxblsWTPK9dOsq3y4yoXlhX+0EpM9PYPV8OleayTRyhS7O/FzHmqpJNlt
# G524RusuIU+xNwUTEKgFFHgm
# =5YPM
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 27 Sep 2022 16:27:24 EDT
# gpg:                using RSA key 42F6C04E540BD1A99E7B8A90239B9B6E3BB08B22
# gpg:                issuer "alex.williamson@redhat.com"
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" [full]
# gpg:                 aka "Alex Williamson <alex@shazbot.org>" [full]
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>" [full]
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>" [full]
# Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B  8A90 239B 9B6E 3BB0 8B22

* tag 'vfio-updates-20220927.1' of https://gitlab.com/alex.williamson/qemu

:
  vfio/common: Fix vfio_iommu_type1_info use after free
  vfio/migration: Fix incorrect initialization value for parameters in VFIOMigration

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'pull-xen-20220927' of https://xenbits.xen.org/git-http/people/aperard/qemu-dm into staging

Xen patch

- Xen PCI passthrough fix for Atomic Ops requests

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEE+AwAYwjiLP2KkueYDPVXL9f7Va8FAmMy/BUACgkQDPVXL9f7
# Va/EWwf+OYEesPbMD9IWvMAgtbuqK8Q/u+YwX8bviiWsBHdGT/Egut/AKBcdmVo0
# 68erlvsXBlffhT5kw6FtWHPrIMsDA+tos/q4pM7w4IJUsz+RKV/1IYT1pQ92XPP1
# RgxJyMCmVrKadqnDvVE9wAn8NeK3t75Lq5QWhN4cpWDWSSUXta90dlu8QefnrguA
# tTmdgneoDUjBhimpy4LgoWBeBqnAMdN05A0dcGcsTSjptj/GsylwSbbbkGivsaDl
# OH23Lk4I6dBhqGo0bEi/LpuPZ44BsuY6NHUlZixbWZl+PxneePdiEd+6YjEWNAZU
# kx2XEm0hQXYxUZDk+fvHCVZP3Y/b1g==
# =cDzP
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 27 Sep 2022 09:35:17 EDT
# gpg:                using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF
# gpg: Can't check signature: No public key

* tag 'pull-xen-20220927' of https://xenbits.xen.org/git-http/people/aperard/qemu-dm

:
  hw/xen: set pci Atomic Ops requests for passthrough device

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220927093538.8954-2-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

On error, vfio_get_iommu_info() frees and clears *info, but
vfio_connect_container() continues to use the pointer regardless
of the return value.  Restructure the code such that a failure
of this function triggers an error and clean up the remainder of
the function, including updating an outdated comment that had
drifted from its relevant line of code and using host page size
for a default for better compatibility on non-4KB systems.

Reported-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/all/20220910004245.2878-1-nicolinc@nvidia.com/


Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/166326219630.3388898.12882473157184946072.stgit@omen


Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

The structure VFIOMigration of a VFIODevice is allocated and initialized
in vfio_migration_init(). "device_state" and "vm_running" are initialized
to 0, indicating that VFIO device is_STOP and VM is not-running. The
initialization value is incorrect. According to the agreement, default
state of VFIO device is _RUNNING. And if a VFIO device is hot-plugged
while the VM is running, "vm_running" should be 1. This patch fixes it.

Fixes: 02a7e71b ("vfio: Add VM state change handler to know state of VM")
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Link: https://lore.kernel.org/r/20220711014651.1327-1-jiangkunkun@huawei.com


Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

Update the best practices of how to write portable test cases that
can be built and run successfully on both Linux and Windows hosts.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220927110632.1973965-55-bmeng.cn@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

This qtest executable created a serial chardev file to be passed to
the QEMU executable. The serial file was created by g_file_open_tmp(),
which internally opens the file with FILE_SHARE_WRITE security attribute
on Windows. Based on [1], there is only one case that allows the first
call to CreateFile() with GENERIC_READ & FILE_SHARE_WRITE, and second
call to CreateFile() with GENERIC_WRITE & FILE_SHARE_READ. All other
combinations require FILE_SHARE_WRITE in the second call. But there is
no way for the second call (in this case the QEMU executable) to know
what combination was passed to the first call, unless FILE_SHARE_WRITE
is passed to the second call.

Two processes shouldn't share the same file for writing with a chardev.
Let's close the serial file before starting QEMU.

[1] https://docs.microsoft.com/en-us/windows/win32/fileio/creating-and-opening-files



Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20220927110632.1973965-40-bmeng.cn@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

This case was written to use hardcoded /tmp directory for temporary
files. Update to use g_dir_make_tmp() for a portable implementation.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20220927110632.1973965-19-bmeng.cn@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

This case was written to use hardcoded /tmp directory for temporary
files. Update to use g_dir_make_tmp() for a portable implementation.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20220927110632.1973965-17-bmeng.cn@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

This case was written to use hardcoded /tmp directory for temporary
files. Update to use g_file_open_tmp() for a portable implementation.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20220927110632.1973965-16-bmeng.cn@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

This case was written to use hardcoded /tmp directory for temporary
files. Update to use g_file_open_tmp() for a portable implementation.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20220927110632.1973965-13-bmeng.cn@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Move common code for device removing to function.

Signed-off-by: Michael Labiuk <michael.labiuk@virtuozzo.com>
Message-Id: <20220920104842.605530-2-michael.labiuk@virtuozzo.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

When CI fails we don't know what causes the failure. Displaying the
meson test logs can be helpful.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220925113032.1949844-53-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Some migration test cases use TLS to communicate, but they fail on
Windows with the following error messages:

  qemu-system-x86_64: TLS handshake failed: Insufficient credentials for that request.
  qemu-system-x86_64: TLS handshake failed: Error in the pull function.
  query-migrate shows failed migration: TLS handshake failed: Error in the pull function.

Disable them temporarily.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20220925113032.1949844-51-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

close() is a *nix function. It works on any file descriptor, and
sockets in *nix are an example of a file descriptor.

closesocket() is a Windows-specific function, which works only
specifically with sockets. Sockets on Windows do not use *nix-style
file descriptors, and socket() returns a handle to a kernel object
instead, so it must be closed with closesocket().

In QEMU there is already a logic to handle such platform difference
in os-posix.h and os-win32.h, that:

  * closesocket maps to close on POSIX
  * closesocket maps to a wrapper that calls the real closesocket()
    on Windows

Replace the call to close a socket with closesocket() instead.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220925113032.1949844-46-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Sockets on Windows do not use *nix-style file descriptors, so
write()/read()/close() do not work on Windows.

Switch over to use send()/recv()/closesocket() which work with
sockets on all platforms.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220925113032.1949844-45-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

These tests use the exec migration protocol, which is unsupported
on Windows as of today. Disable these tests for now.

Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220925113032.1949844-42-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

By default Windows opens file in text mode, while a POSIX compliant
implementation treats text files and binary files the same.

The fopen() 'mode' string can include the letter 'b' to indicate
binary mode shall be used. POSIX spec says the character 'b' shall
have no effect, but is allowed for ISO C standard conformance.
Let's add the letter 'b' which works on both POSIX and Windows.

Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220925113032.1949844-41-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

On Windows the QEMU executable is created via CreateProcess() and
IO redirection does not work, so don't bother adding IO redirection
to the command line.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220925113032.1949844-40-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Single quotes in the arguments (oem_id='CRASH ') are not removed in
the Windows environment before it is passed to the QEMU executable.
The space in the argument causes the "-acpitable" option parser to
think that all of its parameters are done, hence it complains:

  '-acpitable' requires one of 'data' or 'file'

Change to use double quotes which works fine on all platforms.

Also /dev/null does not work on win32, and nul should be used.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220925113032.1949844-39-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

These test cases uses "blkdebug:path/to/config:path/to/image" for
testing. On Windows, absolute file paths contain the delimiter ':'
which causes the blkdebug filename parser fail to parse filenames.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220925113032.1949844-38-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

libqmp.c::qmp_fd_vsend_fds() is not available on Windows, hence any
APIs in libqtest that call libqmp.c::qmp_fd_vsend_fds() should be
excluded for win32 too. This includes the following:

  * qtest_qmp_vsend_fds()
  * qtest_vqmp_fds()
  * qtest_qmp_fds()
  * qtest_qmp_add_client()

Note qtest_qmp_vsend() was wrongly written to call qmp_fd_vsend_fds()
previously, but it should call the non fds version API qmp_fd_vsend().

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220925113032.1949844-35-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Commit dd210749 ("tests/libqtest: Use libqtest-single.h in tests that require global_qtest")
moved global_qtest to libqtest-single.h, by declaring global_qtest
attribute to be common and weak.

This trick unfortunately does not work on Windows, and building
qtest test cases results in multiple definition errors of the weak
symbol global_qtest, as Windows PE does not have the concept of
the so-called weak symbol like ELF in the *nix world.

However Windows does provide a trick to declare a variable to be
a common symbol, via __declspec(selectany) [1]. It does not provide
the "strong override weak" effect but we don't need it in our use
case anyway. So let's use it for win32.

[1] https://docs.microsoft.com/en-us/cpp/cpp/selectany



Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220925113032.1949844-33-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

The test_qmp_oob test case calls mkfifo() which does not exist on
win32. Exclude it.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220925113032.1949844-31-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

The test-filter-{mirror,redirector} cases use socketpair() API that
is only available on POSIX and should only be built for POSIX.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220925113032.1949844-30-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Some of the virtio-net-test test cases require socketpair() to do the
test setup. Skip them for win32.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220925113032.1949844-29-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

This case was written to use hardcoded /tmp directory for temporary
files. Update to use g_file_open_tmp() for a portable implementation.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220925113032.1949844-25-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

This case was written to use hardcoded /tmp directory for temporary
files. Update to use g_get_tmp_dir() for a portable implementation.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220925113032.1949844-24-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

This case was written to use hardcoded /tmp directory for temporary
files. Update to use g_file_open_tmp() for a portable implementation.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220925113032.1949844-23-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

The qtest library was written to use hardcoded /tmp directory for
temporary files. Update to use g_get_tmp_dir() and g_dir_make_tmp()
for a portable implementation.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220925113032.1949844-22-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>