Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230611085846.21415-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.

Mechanical change doing:

  $ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Since we *might* have user emulation with softmmu,
use the clearer 'CONFIG_SYSTEM_ONLY' key to check
for system emulation.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We use the CONFIG_USER_ONLY key to describe user emulation,
and the CONFIG_SOFTMMU key to describe system emulation. Alias
it as 'CONFIG_SYSTEM_ONLY' for parity with user emulation.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-8-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Since we *might* have user emulation with softmmu,
replace the system emulation check by !user emulation one.

Invert some if() ladders for clarity.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-7-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Since we *might* have user emulation with softmmu,
replace the system emulation check by !user emulation one.

Invert the #ifdef'ry in TCGCPUOps structure for clarity.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-6-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Since we *might* have user emulation with softmmu,
replace the system emulation check by !user emulation one.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230613133347.82210-5-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Since we *might* have user emulation with softmmu,
replace the system emulation check by !user emulation one.

Invert some if() ladders for clarity.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-4-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We don't build any user emulation target for Tricore,
only the system emulation. No need to check for it as
it is always defined.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230613133347.82210-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Since cpu_mmu_index() is well-defined for user-only,
we can remove the surrounding #ifdef'ry entirely.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Restructure the ifdef ladder, separating 64-bit from 32-bit,
and ensure _CALL_AIX is set for ELF v1.  Fixes the build for
ppc64 big-endian host with clang.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Otherwise we hit the default assert not reached.
Handle it as MO_ATOM_NONE, because of size and misalignment.
We already handle this correctly in do_ld16_beN.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

The macOS catalina compiler produces an error for __int128_t
as the type for allocation with SSE inline asm constraint.
Create a new X86Int128Union type and use the vector type for
all SSE register inputs and outputs.

Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-target-arm-20230619' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * Fix return value from LDSMIN/LDSMAX 8/16 bit atomics
 * Return correct result for LDG when ATA=0
 * Conversion of system insns, loads and stores to decodetree
 * hw/intc/allwinner-a10-pic: Handle IRQ levels other than 0 or 1
 * hw/sd/allwinner-sdhost: Don't send non-boolean IRQ line levels
 * hw/timer/nrf51_timer: Don't lose time when timer is queried in tight loop
 * hw/arm/Kconfig: sbsa-ref uses Bochs display
 * imx_serial: set wake bit when we receive a data byte
 * docs: sbsa: document board to firmware interface
 * hw/misc/bcm2835_property: avoid hard-coded constants

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmSQZd0ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3lvoEACHH2dWWb1WAMB4GSZbM0PA
# kStY9PO7Ex87BRN6cX2T6qv40eWvZsLsgJn/igDmuv9kXIuejgw5Ri36I+Jce0ZN
# +d2DyrsEH/GlIDcl86HnbG1WGB27uAu0imE8kiokNymsFbyvfLZrByi03rwPRxkp
# fBVK2aFXTq1cZhjo3/43ySbF4/09ajci8uHPtnLla+WpZzoxP38GZ8qsY6WdxgEv
# +ap1h2641DDCpkqqan+tEbFUczJ8QrSvUoofreOJhEAnAuqlRX8V4eiiK9McUX+P
# LLUYUAMeTf9Ts2YRuJd9eUvTmxJo2WBiXFpxSvOfu5YOR5pBiDkDrGLkbY5bUvNu
# Qte/O0gEG0GBwZptCnUWJtF1DoMDAnPjB3JjuBkAo0N5ch7G/McoGfNYEaNEbb6N
# uKetTzlR4s0Zxv/SGxow+/kEkiDNCwna2mni563bz+L7+sRJWFEORErcNHCWckkk
# 1W+C1S+pKv9EZvO4lcvJgZus6i5VlWjEOm0IrRcYO+dbA1F7T3j4miIu8JYYIPFu
# IPyZytawpwq8irxTD0Z1hpsjrbkfOMb3hEbmtK4ruSCBRMBA3Zj2cd1ZrL9A00JE
# xC7rLXWxUAOxEXlJ0mDLMU3XGcp5j6wbMtin9odYR0ccXOHaV8dplzLNgAusXtWO
# GqKcq+m7oeSklKl/YIJsuQ==
# =5BGp
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 19 Jun 2023 04:27:41 PM CEST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg:                 aka "Peter Maydell <peter@archaic.org.uk>" [unknown]

* tag 'pull-target-arm-20230619' of https://git.linaro.org/people/pmaydell/qemu-arm

: (33 commits)
  hw/misc/bcm2835_property: Handle CORE_CLK_ID firmware property
  hw/misc/bcm2835_property: Replace magic frequency values by definitions
  hw/misc/bcm2835_property: Use 'raspberrypi-fw-defs.h' definitions
  hw/arm/raspi: Import Linux raspi definitions as 'raspberrypi-fw-defs.h'
  docs: sbsa: document board to firmware interface
  imx_serial: set wake bit when we receive a data byte
  hw/arm/Kconfig: sbsa-ref uses Bochs display
  hw/timer/nrf51_timer: Don't lose time when timer is queried in tight loop
  hw/sd/allwinner-sdhost: Don't send non-boolean IRQ line levels
  hw/intc/allwinner-a10-pic: Handle IRQ levels other than 0 or 1
  target/arm: Convert load/store tags insns to decodetree
  target/arm: Convert load/store single structure to decodetree
  target/arm: Convert load/store (multiple structures) to decodetree
  target/arm: Convert LDAPR/STLR (imm) to decodetree
  target/arm: Convert load (pointer auth) insns to decodetree
  target/arm: Convert atomic memory ops to decodetree
  target/arm: Convert LDR/STR reg+reg to decodetree
  target/arm: Convert LDR/STR with 12-bit immediate to decodetree
  target/arm: Convert ld/st reg+imm9 insns to decodetree
  target/arm: Convert load/store-pair to decodetree
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230612223456.33824-5-philmd@linaro.org
Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com>
[PMD: Split from bigger patch: 3/4]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: added a comment about RPI_FIRMWARE_CORE_CLK_RATE
 really being SoC-specific]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230612223456.33824-4-philmd@linaro.org
Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com>
[PMD: Split from bigger patch: 4/4]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Replace magic property values by a proper definition,
removing redundant comments.

Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230612223456.33824-3-philmd@linaro.org
Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com>
[PMD: Split from bigger patch: 2/4]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230612223456.33824-2-philmd@linaro.org
Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com>
[PMD: Split from bigger patch: 1/4]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

We plan to add more hardware information into DeviceTree to limit amount
of hardcoded values in firmware.

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20230531171834.236569-1-marcin.juszkiewicz@linaro.org
[PMM: fix format nits, add text about platform version fields from
 a comment in the C source file]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The Linux kernel added a flood check for RX data recently in commit
496a4471b7c3 ("serial: imx: work-around for hardware RX flood"). This
check uses the wake bit in the UART status register 2. The wake bit
indicates that the receiver detected a start bit on the RX line. If the
kernel sees a number of RX interrupts without the wake bit being set, it
treats this as spurious data and resets the UART port. imx_serial does
never set the wake bit and triggers the kernel's flood check.

This patch adds support for the wake bit. wake is set when we receive a
new character (it's not set for break events). It seems that wake is
cleared by the kernel driver, the hardware does not have to clear it
automatically after data was read.

The wake bit can be configured as an interrupt source. Support this
mechanism as well.

Co-developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230607092112.655098-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The nrf51_timer has a free-running counter which we implement using
the pattern of using two fields (update_counter_ns, counter) to track
the last point at which we calculated the counter value, and the
counter value at that time.  Then we can find the current counter
value by converting the difference in wall-clock time between then
and now to a tick count that we need to add to the counter value.

Unfortunately the nrf51_timer's implementation of this has a bug
which means it loses time every time update_counter() is called.
After updating s->counter it always sets s->update_counter_ns to
'now', even though the actual point when s->counter hit the new value
will be some point in the past (half a tick, say).  In the worst case
(guest code in a tight loop reading the counter, icount mode) the
counter is continually queried less than a tick after it was last
read, so s->counter never advances but s->update_counter_ns does, and
the guest never makes forward progress.

The fix for this is to only advance update_counter_ns to the
timestamp of the last tick, not all the way to 'now'.  (This is the
pattern used in hw/misc/mps2-fpgaio.c's counter.)

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230606134917.3782215-1-peter.maydell@linaro.org

QEMU allows qemu_irq lines to transfer arbitrary integers.  However
the convention is that for a simple IRQ line the values transferred
are always 0 and 1.  The A10 SD controller device instead assumes a
0-vs-non-0 convention, which happens to work with the interrupt
controller it is wired up to.

Coerce the value to boolean to follow our usual convention.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230606104609.3692557-3-peter.maydell@linaro.org

In commit 2c5fa077 we fixed an endianness bug in the Allwinner
A10 PIC model; however in the process we introduced a regression.
This is because the old code was robust against the incoming 'level'
argument being something other than 0 or 1, whereas the new code was
not.

In particular, the allwinner-sdhost code treats its IRQ line
as 0-vs-non-0 rather than 0-vs-1, so when the SD controller
set its IRQ line for any reason other than transmit the
interrupt controller would ignore it. The observed effect
was a guest timeout when rebooting the guest kernel.

Handle level values other than 0 or 1, to restore the old
behaviour.

Fixes: 2c5fa077 ("hw/intc/allwinner-a10-pic: Don't use set_bit()/clear_bit()")
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230606104609.3692557-2-peter.maydell@linaro.org

Convert the instructions in the load/store memory tags instruction
group to decodetree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-21-peter.maydell@linaro.org

Convert the ASIMD load/store single structure insns to decodetree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230602155223.2040685-20-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

Convert the instructions in the ASIMD load/store multiple structures
instruction classes to decodetree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-19-peter.maydell@linaro.org

Convert the instructions in the LDAPR/STLR (unscaled immediate)
group to decodetree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-18-peter.maydell@linaro.org

Convert the instructions in the load/store register (pointer
authentication) group ot decodetree: LDRAA, LDRAB.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-17-peter.maydell@linaro.org

Convert the insns in the atomic memory operations group to
decodetree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-16-peter.maydell@linaro.org

Convert the LDR and STR instructions which take a register
plus register offset to decodetree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-15-peter.maydell@linaro.org

Convert the LDR and STR instructions which use a 12-bit immediate
offset to decodetree. We can reuse the existing LDR and STR
trans functions for these.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-14-peter.maydell@linaro.org

Convert the load and store instructions which use a 9-bit
immediate offset to decodetree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-13-peter.maydell@linaro.org

Convert the load/store register pair insns (LDP, STP,
LDNP, STNP, LDPSW, STGP) to decodetree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230602155223.2040685-12-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

Convert the "Load register (literal)" instruction class to
decodetree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-11-peter.maydell@linaro.org

Convert the load/store exclusive pair (LDXP, STXP, LDAXP, STLXP),
compare-and-swap pair (CASP, CASPA, CASPAL, CASPL), and compare-and
swap (CAS, CASA, CASAL, CASL) instructions to decodetree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-10-peter.maydell@linaro.org

Convert the instructions in the load/store exclusive (STXR,
STLXR, LDXR, LDAXR) and load/store ordered (STLR, STLLR,
LDAR, LDLAR) to decodetree.

Note that for STLR, STLLR, LDAR, LDLAR this fixes an under-decoding
in the legacy decoder where we were not checking that the RES1 bits
in the Rs and Rt2 fields were set.

The new function ldst_iss_sf() is equivalent to the existing
disas_ldst_compute_iss_sf(), but it takes the pre-decoded 'ext' field
rather than taking an undecoded two-bit opc field and extracting
'ext' from it. Once all the loads and stores have been converted
to decodetree disas_ldst_compute_iss_sf() will be unused and
can be deleted.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-9-peter.maydell@linaro.org

Convert the exception generation instructions SVC, HVC, SMC, BRK and
HLT to decodetree.

The old decoder decoded the halting-debug insnns DCPS1, DCPS2 and
DCPS3 just in order to then make them UNDEF; as with DRPS, we don't
bother to decode them, but document the patterns in a64.decode.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-8-peter.maydell@linaro.org

Convert MSR (reg), MRS, SYS, SYSL to decodetree.  For QEMU these are
all essentially the same instruction (system register access).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-7-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

Convert the MSR (immediate) insn to decodetree. Our implementation
has basically no commonality between the different destinations,
so we decode the destination register in a64.decode.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-6-peter.maydell@linaro.org