PVRDMA queue

Several CVE fixes for the PVRDMA device.

# gpg: Signature made Sun 04 Jul 2021 20:56:05 BST
# gpg:                using RSA key 36D4C0F0CF2FE46D
# gpg: Good signature from "Marcel Apfelbaum <marcel.apfelbaum@zoho.com>" [marginal]
# gpg:                 aka "Marcel Apfelbaum <marcel@redhat.com>" [marginal]
# gpg:                 aka "Marcel Apfelbaum <marcel.apfelbaum@gmail.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B1C6 3A57 F92E 08F2 640F  31F5 36D4 C0F0 CF2F E46D

* remotes/marcel/tags/pvrdma-04-07-2021-v2:
  pvrdma: Fix the ring init error flow (CVE-2021-3608)
  pvrdma: Ensure correct input on ring init (CVE-2021-3607)
  hw/rdma: Fix possible mremap overflow in the pvrdma device (CVE-2021-3582)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Do not unmap uninitialized dma addresses.

Fixes: CVE-2021-3608
Reviewed-by: VictorV (Kunlun Lab) <vv474172261@gmail.com>
Tested-by: VictorV (Kunlun Lab) <vv474172261@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <20210630115246.2178219-1-marcel@redhat.com>
Tested-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>

Check the guest passed a non zero page count
for pvrdma device ring buffers.

Fixes: CVE-2021-3607
Reported-by: VictorV (Kunlun Lab) <vv474172261@gmail.com>
Reviewed-by: VictorV (Kunlun Lab) <vv474172261@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <20210630114634.2168872-1-marcel@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Tested-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>

Ensure mremap boundaries not trusting the guest kernel to
pass the correct buffer length.

Fixes: CVE-2021-3582
Reported-by: VictorV (Kunlun Lab) <vv474172261@gmail.com>
Tested-by: VictorV (Kunlun Lab) <vv474172261@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <20210616110600.20889-1-marcel.apfelbaum@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Tested-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Reviewed-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>

MIPS patches queue

- Extract nanoMIPS, microMIPS, Code Compaction from translate.c
- Allow PCI config accesses smaller than 32-bit on Bonito64 device
- Fix migration of g364fb device on Jazz Magnum
- Fix dp8393x PROM checksum on Jazz Magnum and Quadra 800
- Map the UART devices unconditionally on Jazz Magnum
- Add functional test booting Linux on the Fuloong 2E

# gpg: Signature made Fri 02 Jul 2021 16:36:19 BST
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd/tags/mips-20210702:
  hw/mips/jazz: Map the UART devices unconditionally
  hw/mips/jazz: specify correct endian for dp8393x device
  hw/m68k/q800: fix PROM checksum and MAC address storage
  qemu/bitops.h: add bitrev8 implementation
  dp8393x: remove onboard PROM containing MAC address and checksum
  hw/m68k/q800: move PROM and checksum calculation from dp8393x device to board
  hw/mips/jazz: move PROM and checksum calculation from dp8393x device to board
  dp8393x: convert to trace-events
  dp8393x: checkpatch fixes
  g364fb: add VMStateDescription for G364SysBusState
  g364fb: use RAM memory region for framebuffer
  tests/acceptance: Test Linux on the Fuloong 2E machine
  hw/pci-host/bonito: Allow PCI config accesses smaller than 32-bit
  hw/pci-host/bonito: Trace PCI config accesses smaller than 32-bit
  target/mips: Extract nanoMIPS ISA translation routines
  target/mips: Extract the microMIPS ISA translation routines
  target/mips: Extract Code Compaction ASE translation routines
  target/mips: Add declarations for generic TCG helpers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * more MVE instructions
 * hw/gpio/gpio_pwr: use shutdown function for reboot
 * target/arm: Check NaN mode before silencing NaN
 * tests: Boot and halt a Linux guest on the Raspberry Pi 2 machine
 * hw/arm: Add basic power management to raspi.
 * docs/system/arm: Add quanta-gbs-bmc, quanta-q7l1-bmc

# gpg: Signature made Fri 02 Jul 2021 13:59:19 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210702: (24 commits)
  target/arm: Implement MVE shifts by register
  target/arm: Implement MVE shifts by immediate
  target/arm: Implement MVE long shifts by register
  target/arm: Implement MVE long shifts by immediate
  target/arm: Implement MVE VADDLV
  target/arm: Implement MVE VSHLC
  target/arm: Implement MVE saturating narrowing shifts
  target/arm: Implement MVE VSHRN, VRSHRN
  target/arm: Implement MVE VSRI, VSLI
  target/arm: Implement MVE VSHLL
  target/arm: Implement MVE vector shift right by immediate insns
  target/arm: Implement MVE vector shift left by immediate insns
  target/arm: Implement MVE logical immediate insns
  target/arm: Use dup_const() instead of bitfield_replicate()
  target/arm: Use asimd_imm_const for A64 decode
  target/arm: Make asimd_imm_const() public
  target/arm: Fix bugs in MVE VRMLALDAVH, VRMLSLDAVH
  target/arm: Fix MVE widening/narrowing VLDR/VSTR offset calculation
  hw/gpio/gpio_pwr: use shutdown function for reboot
  target/arm: Check NaN mode before silencing NaN
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

When using the Magnum ARC firmware we can see accesses to the
UART1 being rejected, because the device is not mapped:

  $ qemu-system-mips64el -M magnum -d guest_errors,unimp -bios NTPROM.RAW
  Invalid access at addr 0x80007004, size 1, region '(null)', reason: rejected
  Invalid access at addr 0x80007001, size 1, region '(null)', reason: rejected
  Invalid access at addr 0x80007002, size 1, region '(null)', reason: rejected
  Invalid access at addr 0x80007003, size 1, region '(null)', reason: rejected
  Invalid access at addr 0x80007004, size 1, region '(null)', reason: rejected

Since both UARTs are present (soldered on the board) regardless
of whether there are character devices connected, map them
unconditionally.

(This code pre-dated commit 12051d82 which made it safe to pass
NULL in as a chardev to serial devices.)

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210629053704.2584504-1-f4bug@amsat.org>

The MIPS magnum machines are available in both big endian (mips64) and little
endian (mips64el) configurations. Ensure that the dp893x big_endian property
is set accordingly using logic similar to that used for the MIPS malta
machines.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625065401.30170-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

The checksum used by MacOS to validate the PROM content is an exclusive-OR
rather than a sum over the corresponding bytes. In addition the MAC address
must be stored in bit-reversed format as indicated in comments in Linux's
macsonic.c.

With the PROM contents fixed MacOS starts to probe the device registers
when AppleTalk is enabled in the Control Panel.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Message-Id: <20210625065401.30170-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

This will be required for an upcoming checksum calculation.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625065401.30170-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

According to the datasheet the dp8393x chipset does not contain any NVRAM capable
of storing a MAC address or checksum. Now that both the MIPS jazz and m68k q800
boards generate the PROM region and checksum themselves, remove the generated
PROM from the dp8393x device itself.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625065401.30170-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

This is in preparation for each board to have its own separate bit storage
format and checksum for storing the MAC address.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625065401.30170-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

This is in preparation for each board to have its own separate bit storage
format and checksum for storing the MAC address.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625065401.30170-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Message-Id: <20210625065401.30170-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Also fix a simple comment typo of "constrainst" to "constraints".

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Message-Id: <20210625065401.30170-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Currently when QEMU attempts to migrate the MIPS magnum machine it crashes due
to a mistake in the g364fb VMStateDescription configuration which expects a
G364SysBusState and not a G364State.

Resolve the issue by adding a new VMStateDescription for G364SysBusState and
embedding the existing vmstate_g364fb VMStateDescription inside it using
VMSTATE_STRUCT.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 97a3f6ff ("g364fb: convert to qdev")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625163554.14879-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Since the migration stream is already broken, we can use this opportunity to
change the framebuffer so that it is migrated as a RAM memory region rather
than as an array of bytes.

In particular this helps the output of the analyze-migration.py tool which
no longer contains a huge array representing the framebuffer contents.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625163554.14879-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Test the kernel from Lemote rescue image:
http://dev.lemote.com/files/resource/download/rescue/rescue-yl


Once downloaded, set the RESCUE_YL_PATH environment variable
to point to the downloaded image and test as:

  $ RESCUE_YL_PATH=~/images/fuloong2e/rescue-yl \
    AVOCADO_ALLOW_UNTRUSTED_CODE=1 \
    avocado --show=app,console run tests/acceptance/machine_mips_fuloong2e.py
  Fetching asset from tests/acceptance/machine_mips_fuloong2e.py:MipsFuloong2e.test_linux_kernel_isa_serial
   (1/1) tests/acceptance/machine_mips_fuloong2e.py:MipsFuloong2e.test_linux_kernel_isa_serial:
  console: Linux version 2.6.27.7lemote (root@debian) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #6 Fri Dec 12 00:11:25 CST 2008
  console: busclock=33000000, cpuclock=-2145008360,memsize=256,highmemsize=0
  console: console [early0] enabled
  console: CPU revision is: 00006302 (ICT Loongson-2)
  PASS (0.16 s)
  JOB TIME   : 0.51 s

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210624202747.1433023-5-f4bug@amsat.org>

When running the official PMON firmware for the Fuloong 2E, we see
8-bit and 16-bit accesses to PCI config space:

  $ qemu-system-mips64el -M fuloong2e -bios pmon_2e.bin \
    -trace -trace bonito\* -trace pci_cfg\*

  pci_cfg_write vt82c686b-pm 05:4 @0x90 <- 0xeee1
  bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x4d2, size: 2
  pci_cfg_write vt82c686b-pm 05:4 @0xd2 <- 0x1
  pci_cfg_write vt82c686b-pm 05:4 @0x4 <- 0x1
  pci_cfg_write vt82c686b-isa 05:0 @0x4 <- 0x7
  bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x81, size: 1
  pci_cfg_read vt82c686b-isa 05:0 @0x81 -> 0x0
  bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x81, size: 1
  pci_cfg_write vt82c686b-isa 05:0 @0x81 <- 0x80
  bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x83, size: 1
  pci_cfg_write vt82c686b-isa 05:0 @0x83 <- 0x89
  bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x85, size: 1
  pci_cfg_write vt82c686b-isa 05:0 @0x85 <- 0x3
  bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x5a, size: 1
  pci_cfg_write vt82c686b-isa 05:0 @0x5a <- 0x7
  bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x85, size: 1
  pci_cfg_write vt82c686b-isa 05:0 @0x85 <- 0x1

Also this is what the Linux kernel does since it supports the Bonito
north bridge:
https://elixir.bootlin.com/linux/v2.6.15/source/arch/mips/pci/ops-bonito64.c#L85



So it seems safe to assume the datasheet is incomplete or outdated
regarding the address constraints.

This problem was exposed by commit 911629e6
("vt82c686: Fix SMBus IO base and configuration registers").

Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210624202747.1433023-4-f4bug@amsat.org>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>

Implement the MVE shifts by register, which perform
shifts on a single general-purpose register.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-19-peter.maydell@linaro.org

Implement the MVE shifts by immediate, which perform shifts
on a single general-purpose register.

These patterns overlap with the long-shift-by-immediates,
so we have to rearrange the grouping a little here.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-18-peter.maydell@linaro.org

Implement the MVE long shifts by register, which perform shifts on a
pair of general-purpose registers treated as a 64-bit quantity, with
the shift count in another general-purpose register, which might be
either positive or negative.

Like the long-shifts-by-immediate, these encodings sit in the space
that was previously the UNPREDICTABLE MOVS/ORRS with Rm==13,15.
Because LSLL_rr and ASRL_rr overlap with both MOV_rxri/ORR_rrri and
also with CSEL (as one of the previously-UNPREDICTABLE Rm==13 cases),
we have to move the CSEL pattern into the same decodetree group.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-17-peter.maydell@linaro.org

The MVE extension to v8.1M includes some new shift instructions which
sit entirely within the non-coprocessor part of the encoding space
and which operate only on general-purpose registers.  They take up
the space which was previously UNPREDICTABLE MOVS and ORRS encodings
with Rm == 13 or 15.

Implement the long shifts by immediate, which perform shifts on a
pair of general-purpose registers treated as a 64-bit quantity, with
an immediate shift count between 1 and 32.

Awkwardly, because the MOVS and ORRS trans functions do not UNDEF for
the Rm==13,15 case, we need to explicitly emit code to UNDEF for the
cases where v8.1M now requires that.  (Trying to change MOVS and ORRS
is too difficult, because the functions that generate the code are
shared between a dozen different kinds of arithmetic or logical
instruction for all A32, T16 and T32 encodings, and for some insns
and some encodings Rm==13,15 are valid.)

We make the helper functions we need for UQSHLL and SQSHLL take
a 32-bit value which the helper casts to int8_t because we'll need
these helpers also for the shift-by-register insns, where the shift
count might be < 0 or > 32.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-16-peter.maydell@linaro.org

Implement the MVE VADDLV insn; this is similar to VADDV, except
that it accumulates 32-bit elements into a 64-bit accumulator
stored in a pair of general-purpose registers.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-15-peter.maydell@linaro.org

Implement the MVE VSHLC insn, which performs a shift left of the
entire vector with carry in bits provided from a general purpose
register and carry out bits written back to that register.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-14-peter.maydell@linaro.org

Implement the MVE saturating shift-right-and-narrow insns
VQSHRN, VQSHRUN, VQRSHRN and VQRSHRUN.

do_srshr() is borrowed from sve_helper.c.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-13-peter.maydell@linaro.org

Implement the MVE shift-right-and-narrow insn VSHRN and VRSHRN.

do_urshr() is borrowed from sve_helper.c.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-12-peter.maydell@linaro.org

Implement the MVE VSRI and VSLI insns, which perform a
shift-and-insert operation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-11-peter.maydell@linaro.org

Implement the MVE VHLL (vector shift left long) insn.  This has two
encodings: the T1 encoding is the usual shift-by-immediate format,
and the T2 encoding is a special case where the shift count is always
equal to the element size.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-10-peter.maydell@linaro.org

Implement the MVE vector shift right by immediate insns VSHRI and
VRSHRI.  As with Neon, we implement these by using helper functions
which perform left shifts but allow negative shift counts to indicate
right shifts.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-9-peter.maydell@linaro.org

Implement the MVE shift-vector-left-by-immediate insns VSHL, VQSHL
and VQSHLU.

The size-and-immediate encoding here is the same as Neon, and we
handle it the same way neon-dp.decode does.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-8-peter.maydell@linaro.org

Implement the MVE logical-immediate insns (VMOV, VMVN,
VORR and VBIC). These have essentially the same encoding
as their Neon equivalents, and we implement the decode
in the same way.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-7-peter.maydell@linaro.org

Use dup_const() instead of bitfield_replicate() in
disas_simd_mod_imm().

(We can't replace the other use of bitfield_replicate() in this file,
in logic_imm_decode_wmask(), because that location needs to handle 2
and 4 bit elements, which dup_const() cannot.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-6-peter.maydell@linaro.org

The A64 AdvSIMD modified-immediate grouping uses almost the same
constant encoding that A32 Neon does; reuse asimd_imm_const() (to
which we add the AArch64-specific case for cmode 15 op 1) instead of
reimplementing it all.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-5-peter.maydell@linaro.org

The function asimd_imm_const() in translate-neon.c is an
implementation of the pseudocode AdvSIMDExpandImm(), which we will
also want for MVE.  Move the implementation to translate.c, with a
prototype in translate.h.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-4-peter.maydell@linaro.org

The initial implementation of the MVE VRMLALDAVH and VRMLSLDAVH
insns had some bugs:
 * the 32x32 multiply of elements was being done as 32x32->32,
   not 32x32->64
 * we were incorrectly maintaining the accumulator in its full
   72-bit form across all 4 beats of the insn; in the pseudocode
   it is squashed back into the 64 bits of the RdaHi:RdaLo
   registers after each beat

In particular, fixing the second of these allows us to recast
the implementation to avoid 128-bit arithmetic entirely.

Since the element size here is always 4, we can also drop the
parameterization of ESIZE to make the code a little more readable.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-3-peter.maydell@linaro.org

In do_ldst(), the calculation of the offset needs to be based on the
size of the memory access, not the size of the elements in the
vector.  This meant we were getting it wrong for the widening and
narrowing variants of the various VLDR and VSTR insns.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-2-peter.maydell@linaro.org

qemu has 2 type of functions: shutdown and reboot. Shutdown
function has to be used for machine shutdown. Otherwise we cause
a reset with a bogus "cause" value, when we intended a shutdown.

Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210625111842.3790-3-maxim.uvarov@linaro.org
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

If the CPU is running in default NaN mode (FPCR.DN == 1) and we execute
FRSQRTE, FRECPE, or FRECPX with a signaling NaN, parts_silence_nan_frac() will
assert due to fpst->default_nan_mode being set.

To avoid this, we check to see what NaN mode we're running in before we call
floatxx_silence_nan().

Signed-off-by: Joe Komlodi <joe.komlodi@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1624662174-175828-2-git-send-email-joe.komlodi@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Add a test booting and quickly shutdown a raspi2 machine,
to test the power management model:

   (1/1) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_raspi2_initrd:
  console: [    0.000000] Booting Linux on physical CPU 0xf00
  console: [    0.000000] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
  console: [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  console: [    0.000000] CPU: div instructions available: patching division code
  console: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  console: [    0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B
  ...
  console: Boot successful.
  console: cat /proc/cpuinfo
  console: / # cat /proc/cpuinfo
  ...
  console: processor      : 3
  console: model name     : ARMv7 Processor rev 5 (v7l)
  console: BogoMIPS       : 125.00
  console: Features       : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
  console: CPU implementer        : 0x41
  console: CPU architecture: 7
  console: CPU variant    : 0x0
  console: CPU part       : 0xc07
  console: CPU revision   : 5
  console: Hardware       : BCM2835
  console: Revision       : 0000
  console: Serial         : 0000000000000000
  console: cat /proc/iomem
  console: / # cat /proc/iomem
  console: 00000000-3bffffff : System RAM
  console: 00008000-00afffff : Kernel code
  console: 00c00000-00d468ef : Kernel data
  console: 3f006000-3f006fff : dwc_otg
  console: 3f007000-3f007eff : /soc/dma@7e007000
  console: 3f00b880-3f00b8bf : /soc/mailbox@7e00b880
  console: 3f100000-3f100027 : /soc/watchdog@7e100000
  console: 3f101000-3f102fff : /soc/cprman@7e101000
  console: 3f200000-3f2000b3 : /soc/gpio@7e200000
  PASS (24.59 s)
  RESULTS    : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
  JOB TIME   : 25.02 s

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210531113837.1689775-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>