This can be allow to include controller-specific data while
saving/loading in-flight scsi requests of the vmbus scsi controller.

Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424123444.3481728-7-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Guest OS uses ACPI to discover VMBus presence.  Add a corresponding
entry to DSDT in case VMBus has been enabled.

Experimentally Windows guests were found to require this entry to
include two IRQ resources. They seem to never be used but they still
have to be there.

Make IRQ numbers user-configurable via corresponding properties; use 7
and 13 by default.

Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424123444.3481728-6-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

As vmbus-bridge is derived from sysbus device, it has to be whitelisted
to be allowed to be created with -device.

Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424123444.3481728-5-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add the VMBus infrastructure -- bus, devices, root bridge, vmbus state
machine, vmbus channel interactions, etc.

VMBus is a collection of technologies.  At its lowest layer, it's a message
passing and signaling mechanism, allowing efficient passing of messages to and
from guest VMs.  A layer higher, it's a mechanism for defining channels of
communication, where each channel is tagged with a type (which implies a
protocol) and a instance ID.  A layer higher than that, it's a bus driver,
serving as the basis of device enumeration within a VM, where a channel can
optionally be exposed as a paravirtual device.  When a server-side (paravirtual
back-end) component wishes to offer a channel to a guest VM, it does so by
specifying a channel type, a mode, and an instance ID.  VMBus then exposes this
in the guest.

More information about VMBus can be found in the file
vmbuskernelmodeclientlibapi.h in Microsoft's WDK.

TODO:
 - split into smaller palatable pieces
 - more comments
 - check and handle corner cases

Kudos to Evgeny Yakovlev (formerly eyakovlev@virtuozzo.com) and Andrey
Smetatin (formerly asmetanin@virtuozzo.com) for research and
prototyping.

Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424123444.3481728-4-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add a header with data structures and constants used in Hyper-V VMBus
hypervisor <-> guest interactions.

Based on the respective stuff from Linux kernel.

Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424123444.3481728-3-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424123444.3481728-2-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

List the name of the helper targets when calling 'make help',
along with the tool targets:

  $ make help
  [...]

  Helper targets:
    fsdev/virtfs-proxy-helper      - Build virtfs-proxy-helper
    scsi/qemu-pr-helper            - Build qemu-pr-helper
    qemu-bridge-helper             - Build qemu-bridge-helper
    vhost-user-gpu                 - Build vhost-user-gpu
    virtiofsd                      - Build virtiofsd

  Tools targets:
    qemu-ga                        - Build qemu-ga tool
    qemu-keymap                    - Build qemu-keymap tool
    elf2dmp                        - Build elf2dmp tool
    ivshmem-client                 - Build ivshmem-client tool
    ivshmem-server                 - Build ivshmem-server tool
    qemu-nbd                       - Build qemu-nbd tool
    qemu-storage-daemon            - Build qemu-storage-daemon tool
    qemu-img                       - Build qemu-img tool
    qemu-io                        - Build qemu-io tool
    qemu-edid                      - Build qemu-edid tool

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

We need "qom/object.h" to call object_ref()/object_unref(),
and to test the TYPE_DUMMY.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200504115656.6045-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

We use the Object type all over the place.
Forward declare it in "qemu/typedefs.h".

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200504115656.6045-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Fix OUTL instructions incorrectly displayed as OUTW.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200517110147.26026-1-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When recursing, the return value of do_object_child_foreach() is not
taken into account.

Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Fixes: d714b8de ("qom: Add recursive version of object_child_for_each")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200404153340.164861-1-clg@kaod.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This patch fixes shift=auto when record/replay is enabled.
Now user does not need to guess the best shift value.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>

--

v2:
  moved icount_time_shift to vmstate subsection
Message-Id: <158988500050.15192.692077802469400393.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Options -M memory-backend and -numa memdev are mutually exclusive,
and if used together, it might lead to a crash in the worst case.
For example when the same backend is used with these options together:
  -m 4G \
  -object memory-backend-ram,id=mem0,size=4G \
  -M pc,memory-backend=mem0 \
  -numa node,memdev=mem0
QEMU will abort with:
   exec.c:2006: qemu_ram_set_idstr: Assertion `!new_block->idstr[0]' failed.

and following backtrace:
    abort ()
    qemu_ram_set_idstr ()
    vmstate_register_ram ()
    vmstate_register_ram_global ()
    machine_consume_memdev ()
    numa_init_memdev_container ()
    numa_complete_configuration ()
    machine_run_board_init ()

add a check to error out in case the user tries to use both options at
the same time.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200511141103.43768-3-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Default RAM backend depends on numa_uses_legacy_mem(), which is
infulenced by -numa options on CLI or set-numa-node QMP command
at preconfig time. If QEMU is started with  '-preconfig'
without -numa, it will lead to creating default RAM backend
even if later set-numa-node is used to assing RAM to NUMA nodes
using 'memdev' NUMA option.
That at best will waste RAM object created by default and with
next patch adding a check to prevent usage of conflicting
 '-M memory-backend' and '-numa memdev'
options, it will make QEMU error out if user tries to configure
NUMA at preconfig time with memdev option, making set-numa-node
unusable.

To fix issue, move preconfig loop before default RAM backend is
created, so that numa_uses_legacy_mem() would take into account
effects of set-numa-node commands executed at preconfig time.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200511141103.43768-2-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Just build the container when run-coverity-scan is invoked with
--update-tools-only --docker.  This requires moving the "docker build"
logic into the update_coverity_tools function.

The only snag is that --update-tools-only --docker requires access to
the dockerfile.  For now just report an error for --src-tarball, and
"docker build" will fail if not in a source tree.  Another possibility
could be to host our container images on a public registry, and use
"FROM qemu:fedora" to make the Dockerfile small enough that it can be
included directly in the run-coverity-scan script.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This lets us look at coverity_tool.md5 across executions of run-coverity-scan
and skip the download.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Tools are already updated via the docker build.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Provide a quick way to skip building the container while we figure out how
to get caching right.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Our trusted docker wrapper allows run-coverity-scan to run with both
docker and podman.

For the "run" phase this is transparent; for the "build" phase however
scripts are replaced with a bind mount (-v).  This is not an issue
because the secret option is meant for secrets stored globally in the
system and bind mounts are a valid substitute for secrets that are known
to whoever builds the container.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Support a [coverity] section in .git/config.  It can be used to retrieve the
token and also, if it is different from user.email, the username of the
submitter.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Read the --extra-files in binary mode to avoid encoding errors.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The docker.py command line is subtly different from docker and podman's,
in that the tag and Dockerfile are passed via positional arguments.
Remove this gratuitous difference and just parse -f and -t.

-f was previously used by --extra-files, only keep the long option.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

SPARC patches

HW:
- Use UNIMP device instead of EMPTY_SLOT
- Make EMPTY_SLOT similar to UNIMP device
- Map UART devices unconditionally
- Pair of fixes for AHB PnP
- Add trace events to AHB PnP

TCG:
- Improve exception logging

CI:
- https://gitlab.com/philmd/qemu/-/pipelines/154231191
- https://travis-ci.org/github/philmd/qemu/builds/696321130



# gpg: Signature made Tue 09 Jun 2020 08:24:09 BST
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/sparc-next-20200609:
  target/sparc/int32_helper: Extract and use excp_name_str()
  target/sparc/int32_helper: Remove DEBUG_PCALL definition
  hw/timer/grlib_gptimer: Display frequency in decimal
  hw/misc/grlib_ahb_apb_pnp: Add trace events on read accesses
  hw/misc/grlib_ahb_apb_pnp: Fix AHB PnP 8-bit accesses
  hw/misc/grlib_ahb_apb_pnp: Avoid crash when writing to AHB PnP registers
  hw/sparc64/niagara: Remove duplicated NIAGARA_UART_BASE definition
  hw/sparc64/niagara: Map the UART device unconditionally
  hw/sparc/leon3: Map the UART device unconditionally
  hw/misc/empty_slot: Name the slots when created
  hw/misc/empty_slot: Move the 'hw/misc' and cover in MAINTAINERS
  hw/misc/empty_slot: Convert debug printf() to trace event
  hw/misc/empty_slot: Add a 'name' qdev property
  hw/misc/empty_slot: Convert 'size' field as qdev property
  hw/misc/empty_slot: Lower address space priority
  hw/sparc/sun4m: Use UnimplementedDevice for I/O devices

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Improve exception error report:

Before:

  qemu: fatal: Trap 0x06 while interrupts disabled, Error state

After:

  qemu: fatal: Trap 0x06 (Window Underflow) while interrupts disabled, Error state

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-8-f4bug@amsat.org>

We define DEBUG_PCALL since b884fc5e (2012-10-06).
7.5 years later it is safe to assume we can remove it :)

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-7-f4bug@amsat.org>

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-6-f4bug@amsat.org>

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-5-f4bug@amsat.org>

The Plug & Play region of the AHB/APB bridge can be accessed
by various word size, however the implementation is clearly
restricted to 32-bit:

  static uint64_t grlib_ahb_pnp_read(void *opaque, hwaddr offset, unsigned size)
  {
      AHBPnp *ahb_pnp = GRLIB_AHB_PNP(opaque);

      return ahb_pnp->regs[offset >> 2];
  }

Similarly to commit 0fbe394a with the APB PnP registers,
set the MemoryRegionOps::impl min/max fields to 32-bit, so
memory.c::access_with_adjusted_size() can adjust when the
access is not 32-bit.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-4-f4bug@amsat.org>

Similarly to commit 158b6594 with the APB PnP registers, guests
can crash QEMU when writting to the AHB PnP registers:

  $ echo 'writeb 0xfffff042 69' | qemu-system-sparc -M leon3_generic -S -bios /etc/magic -qtest stdio
  [I 1571938309.932255] OPENED
  [R +0.063474] writeb 0xfffff042 69
  Segmentation fault (core dumped)

  (gdb) bt
  #0  0x0000000000000000 in  ()
  #1  0x0000562999110df4 in memory_region_write_with_attrs_accessor
      (mr=mr@entry=0x56299aa28ea0, addr=66, value=value@entry=0x7fff6abe13b8, size=size@entry=1, shift=<optimized out>, mask=mask@entry=255, attrs=...) at memory.c:503
  #2  0x000056299911095e in access_with_adjusted_size
      (addr=addr@entry=66, value=value@entry=0x7fff6abe13b8, size=size@entry=1, access_size_min=<optimized out>, access_size_max=<optimized out>, access_fn=access_fn@entry=
      0x562999110d70 <memory_region_write_with_attrs_accessor>, mr=0x56299aa28ea0, attrs=...) at memory.c:539
  #3  0x0000562999114fba in memory_region_dispatch_write (mr=mr@entry=0x56299aa28ea0, addr=66, data=<optimized out>, op=<optimized out>, attrs=attrs@entry=...) at memory.c:1482
  #4  0x00005629990c0860 in flatview_write_continue
      (fv=fv@entry=0x56299aa7d8a0, addr=addr@entry=4294963266, attrs=..., ptr=ptr@entry=0x7fff6abe1540, len=len@entry=1, addr1=<optimized out>, l=<optimized out>, mr=0x56299aa28ea0)
      at include/qemu/host-utils.h:164
  #5  0x00005629990c0a76 in flatview_write (fv=0x56299aa7d8a0, addr=4294963266, attrs=..., buf=0x7fff6abe1540, len=1) at exec.c:3165
  #6  0x00005629990c4c1b in address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., attrs@entry=..., buf=buf@entry=0x7fff6abe1540, len=len@entry=1) at exec.c:3256
  #7  0x000056299910f807 in qtest_process_command (chr=chr@entry=0x5629995ee920 <qtest_chr>, words=words@entry=0x56299acfcfa0) at qtest.c:437

Instead of crashing, log the access as unimplemented.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-3-f4bug@amsat.org>

NIAGARA_UART_BASE is already defined few lines earlier.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200608172144.20461-3-f4bug@amsat.org>

The UART is present on the machine regardless there is a
character device connected to it. Map it unconditionally.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200608172144.20461-4-f4bug@amsat.org>

The UART is present on the chipset regardless there is a
character device connected to it. Map it unconditionally.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200608172144.20461-2-f4bug@amsat.org>

Directly set the slot name when creating the device,
to display the device name in trace events.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-8-f4bug@amsat.org>

Add an entry for the 'empty_slot' device.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-7-f4bug@amsat.org>

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-6-f4bug@amsat.org>

Add a 'name' qdev property so when multiple slots are
accessed, we can notice which one is accessed.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-5-f4bug@amsat.org>

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-4-f4bug@amsat.org>

Empty slots model RAZ/WI access on a bus. Since we can still
(hot) plug devices on the bus, lower the slot priority, so
device added later is accessed first.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-3-f4bug@amsat.org>

These devices are not slots on a bus, but real I/O devices
that we do not implement. As the ISDN ROM would be a ROMD
device, also model it as UnimplementedDevice.

Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

linux-user pull request 20200605-v2

Implement F_OFD_ fcntl() command, /proc/cpuinfo for hppa
Fix socket(), prnctl() error codes, underflow in target_mremap,
    epoll_create() strace, oldumount for alpha
User-mode build dependencies improvement

# gpg: Signature made Sat 06 Jun 2020 14:15:36 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-5.1-pull-request:
  stubs: Restrict ui/win32-kbd-hook to system-mode
  hw/core: Restrict CpuClass::get_crash_info() to system-mode
  target/s390x: Restrict CpuClass::get_crash_info() to system-mode
  target/i386: Restrict CpuClass::get_crash_info() to system-mode
  arch_init: Remove unused 'qapi-commands-misc.h' include
  exec: Assert CPU migration is not used on user-only build
  target/riscv/cpu: Restrict CPU migration to system-mode
  stubs/Makefile: Reduce the user-mode object list
  util/Makefile: Reduce the user-mode object list
  tests/Makefile: Restrict some softmmu-only tests
  tests/Makefile: Only display TCG-related tests when TCG is available
  configure: Avoid building TCG when not needed
  Makefile: Only build virtiofsd if system-mode is enabled
  linux-user: implement OFD locks
  linux-user/mmap.c: fix integer underflow in target_mremap
  linux-user/strace.list: fix epoll_create{,1} -strace output
  linux-user: Add support for /proc/cpuinfo on hppa platform
  linux-user: return target error codes for socket() and prctl()
  linux-user, alpha: fix oldumount syscall

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>