Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The CMSDK APB UART INTSTATUS register bits are all write-one-to-clear.
We were getting this correct for the TXO and RXO bits (which need
special casing because their state lives in the STATE register),
but had forgotten to handle the normal bits for RX and TX which
we do store in our s->intstatus field.

Perform the W1C operation on the bits in s->intstatus too.

Fixes: https://bugs.launchpad.net/qemu/+bug/1760262


Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180410134203.17552-1-peter.maydell@linaro.org

Handle read-modify-write i/o with icount

# gpg: Signature made Wed 11 Apr 2018 00:07:23 BST
# gpg:                using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20180411:
  icount: fix cpu_restore_state_from_tb for non-tb-exit cases

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Tue 10 Apr 2018 17:00:19 BST
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-2.12-pull-request:
  linux-user: implement HWCAP bits on MIPS
  linux-user: add microblaze/microblazeel magic numbers in qemu-binfmt-conf.sh
  linux-user: fix microblaze get_sp_from_cpustate()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Block layer patches

# gpg: Signature made Tue 10 Apr 2018 15:53:08 BST
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  qemu-iotests: update 185 output
  commit/stream: Reset delay_ns
  qemu-iotests: Remove _supported_fmt dmg
  iotests: blacklist bochs and cloop for 205 and 208
  iotests.py: improve verify_image_format helper
  hw/block/pflash_cfi: fix off-by-one error
  iotests.py: support unsupported_fmts in main()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

In icount mode, instructions that access io memory spaces in the middle
of the translation block invoke TB recompilation.  After recompilation,
such instructions become last in the TB and are allowed to access io
memory spaces.

When the code includes instruction like i386 'xchg eax, 0xffffd080'
which accesses APIC, QEMU goes into an infinite loop of the recompilation.

This instruction includes two memory accesses - one read and one write.
After the first access, APIC calls cpu_report_tpr_access, which restores
the CPU state to get the current eip.  But cpu_restore_state_from_tb
resets the cpu->can_do_io flag which makes the second memory access invalid.
Therefore the second memory access causes a recompilation of the block.
Then these operations repeat again and again.

This patch moves resetting cpu->can_do_io flag from
cpu_restore_state_from_tb to cpu_loop_exit* functions.

It also adds a parameter for cpu_restore_state which controls restoring
icount.  There is no need to restore icount when we only query CPU state
without breaking the TB.  Restoring it in such cases leads to the
incorrect flow of the virtual time.

In most cases new parameter is true (icount should be recalculated).
But there are two cases in i386 and openrisc when the CPU state is only
queried without the need to break the TB.  This patch fixes both of
these cases.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180409091320.12504.35329.stgit@pasha-VirtualBox>
[rth: Make can_do_io setting unconditional; move from cpu_exec;
make cpu_loop_exit_{noexc,restore} call cpu_loop_exit.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Migration reversion pull for 2.12

One to revert after we decided it needs some more thinking.

# gpg: Signature made Tue 10 Apr 2018 16:02:17 BST
# gpg:                using RSA key 0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20180410a:
  Revert "migration: Don't activate block devices if using -S"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qapi patches for 2018-04-10

- Peter Xu: iotests: fix wait_until_completed()
- Peter Xu: iothread: workaround glib bug which hangs qmp-test
- Peter Xu: monitor: bind dispatch bh to iohandler context

# gpg: Signature made Tue 10 Apr 2018 14:15:09 BST
# gpg:                using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg:                 aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-qapi-2018-04-10:
  monitor: bind dispatch bh to iohandler context
  iothread: workaround glib bug which hangs qmp-test
  iotests: fix wait_until_completed()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Add support for the two currently defined HWCAP bits on MIPS - R6 and
MSA.

Buglink: https://bugs.launchpad.net/qemu/+bug/1754372


Signed-off-by: James Cowgill <james.cowgill@mips.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180315151348.6451-1-james.cowgill@mips.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

ppc patch queue 2018-04-10

Here's a rather late pull request with a handful of fixes for 2.12.
These have been blocked for some time, because I wasn't able to
complete my usual test set due to the SCSI problem fixed in 37c51741
"scsi-disk: Don't enlarge min_io_size to max_io_size".

Since we're in hard freeze, these are all bugfixes.  Most are also
regressions, although in one case it's only a "regression" because a
longstanding bug has been exposed by a new machine type (sam460ex) in
the testcases.  There are also a couple of sam460ex fixes that aren't
regressions since the board didn't exist before.  On the flipside
though, they're low risk because they only touch board specific code
for a board that doesn't exist in any released version.

# gpg: Signature made Tue 10 Apr 2018 08:13:52 BST
# gpg:                using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.12-20180410:
  roms/u-boot-sam460ex: Change to qemu git mirror and update
  sam460ex: Fix timer frequency and clock multipliers
  tests/boot-serial: Test the sam460ex board
  spapr: Initialize reserved areas list in FDT in H_CAS handler
  target/ppc: Fix backwards migration of msr_mask
  hw/misc/macio: Fix crash when listing device properties of macio device
  target/ppc: Initialize lazy_tlb_flush correctly

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180409115212.875-2-laurent@vivier.eu>

get_sigframe() uses regs[1] and this is actual SP.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180409115212.875-1-laurent@vivier.eu>

Commit 4486e89c ("vl: introduce
vm_shutdown()") added a bdrv_drain_all() call.  As a side-effect of the
drain operation the block job iterates one more time than before.  The
185 output no longer matches and the test is failing now.

It may be possible to avoid the superfluous block job iteration, but
that type of patch is not suitable late in the QEMU 2.12 release cycle.

This patch simply updates the 185 output file.  The new behavior is
correct, just not optimal, so make the test pass again.

Fixes: 4486e89c ("vl: introduce vm_shutdown()")
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Streaming and the commit block job only want to apply throttling when
they actually copied data instead of skipping it, so they made the
calculation of delay_ns conditional. However, delay_ns isn't reset when
skipping some sectors, so instead of not waiting, the old delay is
applied again.

Properly reset delay_ns where needed.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

qemu-iotests doesn't support dmg, and the dmg block driver doesn't
support image creation. Two test cases declare dmg as supported, but
that's obviously wrong for both reasons. Remove the declaration.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

Blacklist these formats, as they don't support image creation, as they
say:
    > ./qemu-img create -f bochs x 1m
    qemu-img: x: Format driver 'bochs' does not support image creation

    > ./qemu-img create -f cloop x 1m
    qemu-img: x: Format driver 'cloop' does not support image creation

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Support "generic" formats like in bash tests with their
   _supported_fmt generic
The test, supporting "generic" formats will run if IMGFMT_GENERIC =
true, which is default, except for bochs and cloop. However, you can
use verify_image_format(['generic', 'bochs']), which will run for all
except cloop (for this moment).

Also, add an assert (we don't want set both arguments) and remove
duplication.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

ASAN reported:

    hw/block/pflash_cfi02.c:245:33: runtime error: index 82 out of bounds for type 'uint8_t [82]'

Since the 'cfi_len' member is not used, remove it to keep the code safer.

Cc: qemu-stable@nongnu.org
Reported-by: AddressSanitizer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

This reverts commit 0746a926.
Discussion with kwolf suggests this is actually an API change that
we need to gate on a capability.  Push to 2.13.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

target-arm queue:
 * fpu: Fix rounding mode for floatN_to_uintM_round_to_zero
 * tcg: Fix guest state corruption when running 64-bit Arm
   guests on a 32-bit host (especially when using icount)
 * linux-user/signal.c: Ensure AArch64 signal frame isn't too small
 * cpus.c: ensure running CPU recalculates icount deadlines on timer expiry
 * target/arm: Report unsupported MPU region sizes more clearly
 * hw/arm/fsl-imx: Fix introspection problem with fsl-imx6 and fsl-imx7
 * hw/arm/allwinner-a10: Do not use nd_table in instance_init function
 * hw/sd/bcm2835_sdhost: Don't raise spurious interrupts
 * hw/sd/bcm2835_sdhost: Add tracepoints
 * target-arm: Check undefined opcodes for SWP in A32 decoder
 * hw/arm/integratorcp: Don't do things that could be fatal in the instance_init
 * hw/arm: Allow manually specified /psci node

# gpg: Signature made Tue 10 Apr 2018 13:16:12 BST
# gpg:                using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180410:
  fpu: Fix rounding mode for floatN_to_uintM_round_to_zero
  tcg: Introduce tcg_set_insn_start_param
  linux-user/signal.c: Ensure AArch64 signal frame isn't too small
  cpus.c: ensure running CPU recalculates icount deadlines on timer expiry
  target/arm: Report unsupported MPU region sizes more clearly
  hw/arm/fsl-imx: Fix introspection problem with fsl-imx6 and fsl-imx7
  hw/arm/allwinner-a10: Do not use nd_table in instance_init function
  hw/sd/bcm2835_sdhost: Don't raise spurious interrupts
  hw/sd/bcm2835_sdhost: Add tracepoints
  target-arm: Check undefined opcodes for SWP in A32 decoder
  hw/arm/integratorcp: Don't do things that could be fatal in the instance_init
  hw/arm: Allow manually specified /psci node

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

configure: don't warn on old sdl/gtk versions if disabled.
keymap + gtk fixes.

# gpg: Signature made Tue 10 Apr 2018 10:23:37 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20180410-pull-request:
  configure: don't warn SDL abi if disabled
  configure: don't warn GTK if disabled
  gtk: drop pointless code from gd_window_close
  ui: fix keymap detection under Xwayland

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Eric Auger reported the problem days ago that OOB broke ARM when running
with libvirt:

http://lists.gnu.org/archive/html/qemu-devel/2018-03/msg06231.html



The problem was that the monitor dispatcher bottom half was bound to
qemu_aio_context now, which could be polled unexpectedly in block code.
We should keep the dispatchers run in iohandler_ctx just like what we
did before the Out-Of-Band series (chardev uses qio, and qio binds
everything with iohandler_ctx).

If without this change, QMP dispatcher might be run even before reaching
main loop in block IO path, for example, in a stack like (the ARM case,
"cont" command handler run even during machine init phase):

        #0  qmp_cont ()
        #1  0x00000000006bd210 in qmp_marshal_cont ()
        #2  0x0000000000ac05c4 in do_qmp_dispatch ()
        #3  0x0000000000ac07a0 in qmp_dispatch ()
        #4  0x0000000000472d60 in monitor_qmp_dispatch_one ()
        #5  0x000000000047302c in monitor_qmp_bh_dispatcher ()
        #6  0x0000000000acf374 in aio_bh_call ()
        #7  0x0000000000acf428 in aio_bh_poll ()
        #8  0x0000000000ad5110 in aio_poll ()
        #9  0x0000000000a08ab8 in blk_prw ()
        #10 0x0000000000a091c4 in blk_pread ()
        #11 0x0000000000734f94 in pflash_cfi01_realize ()
        #12 0x000000000075a3a4 in device_set_realized ()
        #13 0x00000000009a26cc in property_set_bool ()
        #14 0x00000000009a0a40 in object_property_set ()
        #15 0x00000000009a3a08 in object_property_set_qobject ()
        #16 0x00000000009a0c8c in object_property_set_bool ()
        #17 0x0000000000758f94 in qdev_init_nofail ()
        #18 0x000000000058e190 in create_one_flash ()
        #19 0x000000000058e2f4 in create_flash ()
        #20 0x00000000005902f0 in machvirt_init ()
        #21 0x00000000007635cc in machine_run_board_init ()
        #22 0x00000000006b135c in main ()

Actually the problem is more severe than that.  After we switched to the
qemu AIO handler it means the monitor dispatcher code can even be called
with nested aio_poll(), then it can be an explicit aio_poll() inside
another main loop aio_poll() which could be racy too; breaking code
like TPM and 9p that use nested event loops.

Switch to use the iohandler_ctx for monitor dispatchers.

My sincere thanks to Eric Auger who offered great help during both
debugging and verifying the problem.  The ARM test was carried out by
applying this patch upon QEMU 2.12.0-rc0 and problem is gone after the
patch.

A quick test of mine shows that after this patch applied we can pass all
raw iotests even with OOB on by default.

CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
Reported-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180410044942.17059-1-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

Free the AIO context earlier than the GMainContext (if we have) to
workaround a glib2 bug that GSource context pointer is not cleared even
if the context has already been destroyed (while it should).

The patch itself only changed the order to destroy the objects, no
functional change at all. Without this workaround, we can encounter
qmp-test hang with oob (and possibly any other use case when iothread is
used with GMainContexts):

  #0  0x00007f35ffe45334 in __lll_lock_wait () from /lib64/libpthread.so.0
  #1  0x00007f35ffe405d8 in _L_lock_854 () from /lib64/libpthread.so.0
  #2  0x00007f35ffe404a7 in pthread_mutex_lock () from /lib64/libpthread.so.0
  #3  0x00007f35fc5b9c9d in g_source_unref_internal (source=0x24f0600, context=0x7f35f0000960, have_lock=0) at gmain.c:1685
  #4  0x0000000000aa6672 in aio_context_unref (ctx=0x24f0600) at /root/qemu/util/async.c:497
  #5  0x000000000065851c in iothread_instance_finalize (obj=0x24f0380) at /root/qemu/iothread.c:129
  #6  0x0000000000962d79 in object_deinit (obj=0x24f0380, type=0x242e960) at /root/qemu/qom/object.c:462
  #7  0x0000000000962e0d in object_finalize (data=0x24f0380) at /root/qemu/qom/object.c:476
  #8  0x0000000000964146 in object_unref (obj=0x24f0380) at /root/qemu/qom/object.c:924
  #9  0x0000000000965880 in object_finalize_child_property (obj=0x24ec640, name=0x24efca0 "mon_iothread", opaque=0x24f0380) at /root/qemu/qom/object.c:1436
  #10 0x0000000000962c33 in object_property_del_child (obj=0x24ec640, child=0x24f0380, errp=0x0) at /root/qemu/qom/object.c:436
  #11 0x0000000000962d26 in object_unparent (obj=0x24f0380) at /root/qemu/qom/object.c:455
  #12 0x0000000000658f00 in iothread_destroy (iothread=0x24f0380) at /root/qemu/iothread.c:365
  #13 0x00000000004c67a8 in monitor_cleanup () at /root/qemu/monitor.c:4663
  #14 0x0000000000669e27 in main (argc=16, argv=0x7ffc8b1ae2f8, envp=0x7ffc8b1ae380) at /root/qemu/vl.c:4749

The glib2 bug is fixed in commit 26056558b ("gmain: allow
g_source_get_context() on destroyed sources", 2012-07-30), so the first
good version is glib2 2.33.10. But we still support building with
glib as old as 2.28, so we need the workaround.

Let's make sure we destroy the GSources first before its owner context
until we drop support for glib older than 2.33.10.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180409083956.1780-1-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

If there are more than one events, wait_until_completed() might return
the 2nd event even if the 1st event is JOB_COMPLETED, since the for loop
will continue to run even if completed is set to True.

It never happened before, but it can be triggered when OOB is enabled
due to the RESUME startup message. Fix that up.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180408030542.17855-1-peterx@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

We incorrectly passed in the current rounding mode
instead of float_round_to_zero.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180410055912.934-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The parameters for tcg_gen_insn_start are target_ulong, which may be split
into two TCGArg parameters for storage in the opcode on 32-bit hosts.

Fixes the ARM target and its direct use of tcg_set_insn_param, which would
set the wrong argument in the 64-on-32 case.

Cc: qemu-stable@nongnu.org
Reported-by:  <alarson@ddci.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180410003558.2470-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The AArch64 signal frame design was extended for SVE in commit
8c5931de, so that instead of having a fixed setup we
now add various records to the frame, with some of them possibly
overflowing into an extra space outside the original 4K reserved
block in the target_sigcontext.  However, we failed to ensure that we
always at least allocate the 4K reserved block.  This is ABI, and
some userspace programs rely on it.  In particular the dash shell
would segfault if the frame wasn't as big enough.

(Compare the kernel's sigframe_size() function in
arch/arm64/kernel/signal.c.)

Reported-by: Richard Henwood <richard.henwood@arm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180409140714.26841-1-peter.maydell@linaro.org
Fixes: https://bugs.launchpad.net/bugs/1761535


Fixes: 8c5931de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

When we run in TCG icount mode, we calculate the number of instructions
to execute using tcg_get_icount_limit(), which ensures that we stop
execution at the next timer deadline. However there is a bug where
currently we do not recalculate that limit if the guest reprograms
a timer so that the next deadline moves closer, and so we will
continue execution until the original limit and fire the timer
later than we should.

Fix this bug in qemu_timer_notify_cb(): if we are currently running
a VCPU in icount mode, we simply need to kick it out of the main
loop and back to tcg_cpu_exec(), where it will recalculate the
icount limit. If we are not currently running a VCPU, then we
retain the existing logic for waking up a halted CPU.

Cc: qemu-stable@nongnu.org
Fixes: https://bugs.launchpad.net/qemu/+bug/1754038


Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180406123838.21249-1-peter.maydell@linaro.org

Currently our PMSAv7 and ARMv7M MPU implementation cannot handle
MPU region sizes smaller than our TARGET_PAGE_SIZE. However we
report that in a slightly confusing way:

 DRSR[3]: No support for MPU (sub)region alignment of 9 bits. Minimum is 10

The problem is not the alignment of the region, but its size;
tweak the error message to say so:
 DRSR[3]: No support for MPU (sub)region size of 512 bytes. Minimum is 1024.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180405172554.27401-1-peter.maydell@linaro.org

QEMU currently exits unexpectedly when trying to introspect the fsl-imx6
and fsl-imx7 devices on systems with many SMP CPUs:

$ echo "{'execute':'qmp_capabilities'}"\
       "{'execute':'device-list-properties',"\
       " 'arguments':{'typename':'fsl,imx6'}}" \
       | arm-softmmu/qemu-system-arm -M virt,accel=qtest -qmp stdio -smp 8
{"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2},
 "package": "build-all"}, "capabilities": []}}
{"return": {}}
fsl,imx6: Only 4 CPUs are supported (8 requested)

And:

$ echo "{'execute':'qmp_capabilities'}"\
       "{'execute':'device-list-properties',"\
       " 'arguments':{'typename':'fsl,imx7'}}" \
       | arm-softmmu/qemu-system-arm -M raspi2,accel=qtest -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2},
 "package": "build-all"}, "capabilities": []}}
{"return": {}}
fsl,imx7: Only 2 CPUs are supported (4 requested)

This happens because these devices are doing an exit() from their
instance_init function - which should never be done since instance_init
can be called at any time for device introspection! Fix it by moving
the deadly check into the realize() function instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1522908551-14885-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The instance_init function of a device can be called at any time, even
if the device is not going to be used (i.e. not going to be realized).
So a instance_init function must not do things that could cause QEMU
to exit, like calling qemu_check_nic_model(&nd_table[0], ...) for example.
But this is what the instance_init function of the allwinner-a10 device
is currently doing - and this causes QEMU to quit unexpectedly when
you run the 'device-list-properties' QMP command for example:

$ echo "{'execute':'qmp_capabilities'}"\
       "{'execute':'device-list-properties',"\
       " 'arguments':{'typename':'allwinner-a10'}}" \
       | arm-softmmu/qemu-system-arm -M mps2-an505,accel=qtest -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2},
 "package": "build-all"}, "capabilities": []}}
{"return": {}}
Unsupported NIC model: lan9118

... and QEMU quits after printing the last line (which should not happen
just because of running 'device-list-properties' here).

And with the cubieboard, this even causes QEMU to abort():

$ echo "{'execute':'qmp_capabilities'}"\
       "{'execute':'device-list-properties',"\
       " 'arguments':{'typename':'allwinner-a10'}}" \
       | arm-softmmu/qemu-system-arm -M cubieboard,accel=qtest -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2},
 "package": "build-all"}, "capabilities": []}}
{"return": {}}
Unexpected error in error_set_from_qdev_prop_error() at hw/core/qdev-properties.c:1095:
Property 'allwinner-emac.netdev' can't take value 'hub0port0', it's in use
Aborted (core dumped)

To fix the problem we've got to move the offending code to the realize
function instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1522862420-7484-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The Linux bcm2835_sdhost driver doesn't work on QEMU, because our
model raises spurious data interrupts.  Our function
bcm2835_sdhost_fifo_run() will flag an interrupt any time it is
called with s->datacnt == 0, even if the host hasn't actually issued
a data read or write command yet.  This means that the driver gets a
spurious data interrupt as soon as it enables IRQs and then does
something else that causes us to call the fifo_run routine, like
writing to SDHCFG, and before it does the write to SDCMD to issue the
read.  The driver's IRQ handler then spins forever complaining that
there's no data and the SD controller isn't in a state where there's
going to be any data:

[   41.040738] sdhost-bcm2835 3f202000.mmc: fsm 1, hsts 00000000
[   41.042059] sdhost-bcm2835 3f202000.mmc: fsm 1, hsts 00000000
(continues forever).

Move the interrupt flag setting to more plausible places:
 * for BUSY, raise this as soon as a BUSYWAIT command has executed
 * for DATA, raise this when the FIFO has any space free (for a write)
   or any data in it (for a read)
 * for BLOCK, raise this when the data count is 0 and we've
   actually done some reading or writing

This is pure guesswork since the documentation for this hardware is
not public, but it is sufficient to get the Linux bcm2835_sdhost
driver to work.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180319161556.16446-3-peter.maydell@linaro.org

Add some tracepoints to the bcm2835_sdhost driver, to assist
debugging.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180319161556.16446-2-peter.maydell@linaro.org

Make sure we are not treating architecturally Undefined instructions
as a SWP, by verifying the opcodes as per section A8.8.229 of ARMv7-A
specification. Bits [21:20] must be zero for this to be a SWP or SWPB.
We also choose to UNDEF for the architecturally UNPREDICTABLE case of
bits [11:8] not being zero.

Signed-off-by: Onur Sahin <onursahin08@gmail.com>
[PMM: tweaked commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

An instance_init function must not fail - and might be called multiple times,
e.g. during device introspection with the 'device-list-properties' QMP
command. Since the integratorcm device ignores this rule, QEMU currently
aborts in this case (though it really should not):

echo "{'execute':'qmp_capabilities'}"\
     "{'execute':'device-list-properties',"\
     "'arguments':{'typename':'integrator_core'}}" \
     | arm-softmmu/qemu-system-arm -M integratorcp,accel=qtest -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2},
 "package": "build-all"}, "capabilities": []}}
{"return": {}}
RAMBlock "integrator.flash" already registered, abort!
Aborted (core dumped)

Move the problematic code to the realize() function instead to fix this
problem.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1522906473-11252-1-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Change the code to avoid exiting QEMU if user provided DTB contains
manually specified /psci node and skip any /psci related fixups
instead.

Fixes: 4cbca7d9 ("hw/arm: Move virt's PSCI DT fixup code to
arm/boot.c")

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Message-id: 20180402205654.14572-1-andrew.smirnov@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Tue 10 Apr 2018 04:36:01 BST
# gpg:                using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  e1000: Old machine types, turn new subsection off
  e1000: Choose which set of props to migrate
  e1000: Migrate props via a temporary structure
  e1000: wire new subsection to property
  e1000: Dupe offload data on reading old stream
  e1000: Convert v3 fields to subsection

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Fix file offset for preadv/pwritev linux-user syscalls.

# gpg: Signature made Tue 10 Apr 2018 03:04:24 BST
# gpg:                using RSA key 51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <filippov@cadence.com>"
# gpg:                 aka "Max Filippov <max.filippov@cogentembedded.com>"
# gpg:                 aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB  17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20180409-xtensa:
  linux-user: fix preadv/pwritev offsets

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

SDL has the same problem as GTK that we might get warnings on SDL ABI
version even if SDL is disabled.  Fix that by only probing SDL if SDL is
enabled.  Also this should let configure be a little bit faster since we
don't really need to probe SDL stuff when it's off.

CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Daniel P. Berrange <berrange@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180410054034.20479-1-peterx@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>