Add helper that returns both status and output, to be used in the
following commit

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-15-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-14-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

Current scheme of image fleecing looks like this:

[guest]                    [NBD export]
  |                              |
  |root                          | root
  v                              v
[copy-before-write] -----> [temp.qcow2]
  |                 target  |
  |file                     |backing
  v                         |
[active disk] <-------------+

 - On guest writes copy-before-write filter copies old data from active
   disk to temp.qcow2. So fleecing client (NBD export) when reads
   changed regions from temp.qcow2 image and unchanged from active disk
   through backing link.

This patch makes possible new image fleecing scheme:

[guest]                   [NBD export]
   |                            |
   | root                       | root
   v                 file       v
[copy-before-write]<------[snapshot-access]
   |           |
   | file      | target
   v           v
[active-disk] [temp.img]

 - copy-before-write does CBW operations and also provides
   snapshot-access API. The API may be accessed through
   snapshot-access driver.

Benefits of new scheme:

1. Access control: if remote client try to read data that not covered
   by original dirty bitmap used on copy-before-write open, client gets
   -EACCES.

2. Discard support: if remote client do DISCARD, this additionally to
   discarding data in temp.img informs block-copy process to not copy
   these clusters. Next read from discarded area will return -EACCES.
   This is significant thing: when fleecing user reads data that was
   not yet copied to temp.img, we can avoid copying it on further guest
   write.

3. Synchronisation between client reads and block-copy write is more
   efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag
   used for writes to temp.qcow2. New scheme is less blocking:
     - fleecing reads are never blocked: if data region is untouched or
       in-flight, we just read from active-disk, otherwise we read from
       temp.img
     - writes to temp.img are not blocked by fleecing reads
     - still, guest writes of-course are blocked by in-flight fleecing
       reads, that currently read from active-disk - it's the minimum
       necessary blocking

4. Temporary image may be of any format, as we don't rely on backing
   feature.

5. Permission relation are simplified. With old scheme we have to share
   write permission on target child of copy-before-write, otherwise
   backing link conflicts with copy-before-write file child write
   permissions. With new scheme we don't have backing link, and
   copy-before-write node may have unshared access to temporary node.
   (Not realized in this commit, will be in future).

6. Having control on fleecing reads we'll be able to implement
   alternative behavior on failed copy-before-write operations.
   Currently we just break guest request (that's a historical behavior
   of backup). But in some scenarios it's a bad behavior: better
   is to drop the backup as failed but don't break guest request.
   With new scheme we can simply unset some bits in a bitmap on CBW
   failure and further fleecing reads will -EACCES, or something like
   this. (Not implemented in this commit, will be in future)
   Additional application for this is implementing timeout for CBW
   operations.

Iotest 257 output is updated, as two more bitmaps now live in
copy-before-write filter.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

The new block driver simply utilizes snapshot-access API of underlying
block node.

In further patches we want to use it like this:

[guest]                   [NBD export]
   |                            |
   | root                       | root
   v                 file       v
[copy-before-write]<------[snapshot-access]
   |           |
   | file      | target
   v           v
[active-disk] [temp.img]

This way, NBD client will be able to read snapshotted state of active
disk, when active disk is continued to be written by guest. This is
known as "fleecing", and currently uses another scheme based on qcow2
temporary image which backing file is active-disk. New scheme comes
with benefits - see next commit.

The other possible application is exporting internal snapshots of
qcow2, like this:

[guest]          [NBD export]
   |                  |
   | root             | root
   v       file       v
[qcow2]<---------[snapshot-access]

For this, we'll need to implement snapshot-access API handlers in
qcow2 driver, and improve snapshot-access block driver (and API) to
make it possible to select snapshot by name. Another thing to improve
is size of snapshot. Now for simplicity we just use size of bs->file,
which is OK for backup, but for qcow2 snapshots export we'll need to
imporve snapshot-access API to get size of snapshot.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-12-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

Add new block driver handlers and corresponding generic wrappers.
It will be used to allow copy-before-write filter to provide
reach fleecing interface in further commit.

In future this approach may be used to allow reading qcow2 internal
snapshots, for example to export them through NBD.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-11-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

Add function to wait for all intersecting requests.
To be used in the further commit.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-10-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

Add a convenient function similar with bdrv_block_status() to get
status of dirty bitmap.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-9-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

Let's reuse convenient helper.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-8-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

Split intersecting-requests functionality out of block-copy to be
reused in copy-before-write filter.

Note: while being here, fix tiny typo in MAINTAINERS.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-7-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

Split block_copy_reset() out of block_copy_reset_unallocated() to be
used separately later.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-6-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

This brings "incremental" mode to copy-before-write filter: user can
specify bitmap so that filter will copy only "dirty" areas.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-5-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

This will be used in the following commit to bring "incremental" mode
to copy-before-write filter.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-4-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

That simplifies handling failure in existing code and in further new
usage of bdrv_merge_dirty_bitmap().

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

We are going to complicate bitmap initialization in the further
commit. And in future, backup job will be able to work without filter
(when source is immutable), so we'll need same bitmap initialization in
copy-before-write filter and in backup job. So, it's reasonable to do
it in block-copy.

Note that for now cbw_open() is the only caller of
block_copy_state_new().

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-2-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

Drop the use of OUTPUT_DIR (test/qemu-iotests under the build
directory), and instead write test output files (.out.bad, .notrun, and
.casenotrun) to TEST_DIR.

With this, the same test can be run concurrently without the separate
instances interfering, because they will need separate TEST_DIRs anyway.
Running the same test separately is useful when running the iotests with
various format/protocol combinations in parallel, or when you just want
to aggressively exercise a single test (e.g. when it fails only
sporadically).

Putting this output into TEST_DIR means that it will stick around for
inspection after the test run is done (though running the same test in
the same TEST_DIR will overwrite it, just as it used to be); but given
that TEST_DIR is a scratch directory, it should be clear that users can
delete all of its content at any point.  (And if TEST_DIR is on tmpfs,
it will just disappear on shutdown.)  Contrarily, alternative approaches
that would put these output files into OUTPUT_DIR with some prefix to
differentiate between separate test runs might easily lead to cluttering
OUTPUT_DIR.

(This change means OUTPUT_DIR is no longer written to by the iotests, so
we can drop its usage altogether.)

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220221172909.762858-1-hreitz@redhat.com>
[hreitz: Simplified `Path(os.path.join(x, y))` to `Path(x, y)`, as
         suggested by Vladimir; and rebased on 9086c763
         ("tests/qemu-iotests: Rework the checks and spots using GNU
         sed")]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

In TAP mode, the stdout is reserved for the TAP protocol, so we
have to make sure to mark other lines with a comment '#' character
at the beginning to avoid that the TAP parser at the other end
gets confused.

To test this condition, run "configure" for example with:

 --block-drv-rw-whitelist=copy-before-write,qcow2,raw,file,host_device,blkdebug,null-co,copy-on-read

so that iotest 041 will report that some tests are not run due to
the missing "quorum" driver. Without this change, "make check-block"
fails since the meson tap parser gets confused by these messages.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223124353.3273898-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

iotest 040 already has some checks for the availability of the 'throttle'
driver, but some new code has been added in the course of time that
depends on 'throttle' but does not check for its availability. Add
a check to the TestCommitWithFilters class so that this iotest now
also passes again if 'throttle' has not been enabled in the QEMU
binaries.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223123127.3206042-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

There is a bug in handling BDRV_REQ_NO_WAIT flag: we still may wait in
wait_serialising_requests() if request is unaligned. And this is
possible for the only user of this flag (preallocate filter) if
underlying file is unaligned to its request_alignment on start.

So, we have to fix preallocate filter to do only aligned preallocate
requests.

Next, we should fix generic block/io.c somehow. Keeping in mind that
preallocate is the only user of BDRV_REQ_NO_WAIT and that we have to
fix its behavior now, it seems more safe to just assert that we never
use BDRV_REQ_NO_WAIT with unaligned requests and add corresponding
comment. Let's do so.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20220215121609.38570-1-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

Coverity points out that we aren't checking the return value
from curl_easy_setopt() for any of the calls to it we make
in block/curl.c.

Some of these options are documented as always succeeding (e.g.
CURLOPT_VERBOSE) but others have documented failure cases (e.g.
CURLOPT_URL).  For consistency we check every call, even the ones
that theoretically cannot fail.

Fixes: Coverity CID 1459336, 1459482, 1460331
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220222152341.850419-3-peter.maydell@linaro.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

In curl_open(), the 'out' label assumes that the state->errmsg string
has been set (either by curl_easy_perform() or by manually copying a
string into it); however if curl_init_state() fails we will jump to
that label without setting the string.  Add the missing error string
setup.

(We can't be specific about the cause of failure: the documentation
of curl_easy_init() just says "If this function returns NULL,
something went wrong".)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220222152341.850419-2-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

When we still have an AIOCB registered for DMA operations, we try to
settle the respective operation by draining the BlockBackend associated
with the IDE device.

However, this assumes that every DMA operation is associated with an
increment of the BlockBackend’s in-flight counter (e.g. through some
ongoing I/O operation), so that draining the BB until its in-flight
counter reaches 0 will settle all DMA operations.  That is not the case:
For TRIM, the guest can issue a zero-length operation that will not
result in any I/O operation forwarded to the BlockBackend, and also not
increment the in-flight counter in any other way.  In such a case,
blk_drain() will be a no-op if no other operations are in flight.

It is clear that if blk_drain() is a no-op, the value of
s->bus->dma->aiocb will not change between checking it in the `if`
condition and asserting that it is NULL after blk_drain().

The particular problem is that ide_issue_trim() creates a BH
(ide_trim_bh_cb()) to settle the TRIM request: iocb->common.cb() is
ide_dma_cb(), which will either create a new request, or find the
transfer to be done and call ide_set_inactive(), which clears
s->bus->dma->aiocb.  Therefore, the blk_drain() must wait for
ide_trim_bh_cb() to run, which currently it will not always do.

To fix this issue, we increment the BlockBackend's in-flight counter
when the TRIM operation begins (in ide_issue_trim(), when the
ide_trim_bh_cb() BH is created) and decrement it when ide_trim_bh_cb()
is done.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2029980


Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220120142259.120189-1-hreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>

ppc-7.0 queue :

* Clang fixes
* Vector/VSX instruction batch fixes

# gpg: Signature made Sat 05 Mar 2022 08:18:06 GMT
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* remotes/legoater/tags/pull-ppc-20220305:
  target/ppc: Add missing helper_reset_fpstatus to helper_XVCVSPBF16
  target/ppc: Add missing helper_reset_fpstatus to VSX_MAX_MINC
  target/ppc: split XXGENPCV macros for readability
  target/ppc: use andc in vrlqmi
  target/ppc: use extract/extract2 to create vrlqnm mask
  target/ppc: use ext32u and deposit in do_vx_vmulhw_i64
  target/ppc: Fix vmul[eo]* instructions marked 2.07
  tests/tcg/ppc64le: Use Altivec register names in clobber list
  tests/tcg/ppc64le: emit bcdsub with .long when needed
  tests/tcg/ppc64le: drop __int128 usage in bcdsub
  target/ppc: change xs[n]madd[am]sp to use float64r32_muladd
  tests/tcg/ppc64le: use inline asm instead of __builtin_mtfsf
  Use long endian options for ppc64

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Reorder do_constant_folding_cond test to satisfy valgrind.
Fix value of MAX_OPC_PARAM_IARGS.
Add opcodes for vector nand, nor, eqv.
Support vector nand, nor, eqv on PPC and S390X hosts.
Support AVX512VL, AVX512BW, AVX512DQ, and AVX512VBMI2.

# gpg: Signature made Fri 04 Mar 2022 18:59:08 GMT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20220304: (21 commits)
  tcg/i386: Implement bitsel for avx512
  tcg/i386: Implement more logical operations for avx512
  tcg/i386: Implement avx512 multiply
  tcg/i386: Implement avx512 min/max/abs
  tcg/i386: Expand scalar rotate with avx512 insns
  tcg/i386: Remove rotls_vec from tcg_target_op_def
  tcg/i386: Expand vector word rotate as avx512vbmi2 shift-double
  tcg/i386: Support avx512vbmi2 vector shift-double instructions
  tcg/i386: Implement avx512 variable rotate
  tcg/i386: Implement avx512 immediate rotate
  tcg/i386: Implement avx512 immediate sari shift
  tcg/i386: Implement avx512 scalar shift
  tcg/i386: Implement avx512 variable shifts
  tcg/i386: Use tcg_can_emit_vec_op in expand_vec_cmp_noinv
  tcg/i386: Add tcg_out_evex_opc
  tcg/i386: Detect AVX512
  tcg/s390x: Implement vector NAND, NOR, EQV
  tcg/ppc: Implement vector NAND, NOR, EQV
  tcg: Add opcodes for vector nand, nor, eqv
  tcg: Set MAX_OPC_PARAM_IARGS to 7
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Block layer patches

- qemu-storage-daemon: Add --daemonize
- Fix x-blockdev-amend and block node activation code which incorrectly
  executed code in the iothread that must run in the main thread.
- Add macros for coroutine-safe TLS variables (required for correctness
  with LTO)
- Fix crashes with concurrent I/O and bdrv_refresh_limits()
- Split block APIs in global state and I/O
- iotests: Don't refuse to run at all without GNU sed, just skip tests
  that need it

# gpg: Signature made Fri 04 Mar 2022 17:18:31 GMT
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kwolf-gitlab/tags/for-upstream: (50 commits)
  block/amend: Keep strong reference to BDS
  block/amend: Always call .bdrv_amend_clean()
  tests/qemu-iotests: Rework the checks and spots using GNU sed
  iotests/graph-changes-while-io: New test
  iotests: Allow using QMP with the QSD
  block: Make bdrv_refresh_limits() non-recursive
  job.h: assertions in the callers of JobDriver function pointers
  job.h: split function pointers in JobDriver
  block-backend-common.h: split function pointers in BlockDevOps
  block_int-common.h: assertions in the callers of BdrvChildClass function pointers
  block_int-common.h: split function pointers in BdrvChildClass
  block_int-common.h: assertions in the callers of BlockDriver function pointers
  block_int-common.h: split function pointers in BlockDriver
  block/coroutines: I/O and "I/O or GS" API
  block/copy-before-write.h: global state API + assertions
  include/block/snapshot: global state API + assertions
  assertions for blockdev.h global state API
  include/sysemu/blockdev.h: global state API
  assertions for blockjob.h global state API
  include/block/blockjob.h: global state API
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Fixes: 3909ff1f ("target/ppc: Implement xvcvbf16spn and xvcvspbf16 instructions")
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220304175156.2012315-8-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Fixes: da499405 ("target/ppc: Refactor VSX_MAX_MINC helper")
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220304175156.2012315-7-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Fixes: b090f4f1 ("target/ppc: Implement xxgenpcv[bhwd]m instruction")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220304175156.2012315-6-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Fixes: 7e5947df ("target/ppc: implement vrlqmi")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220304175156.2012315-5-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Fixes: 4e272668 ("target/ppc: implement vrlqnm")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220304175156.2012315-4-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Fixes: 29e9dfcf ("target/ppc: vmulh* instructions without helpers")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220304175156.2012315-3-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Some ISA v2.03 Vector Multiply instructions marked to be ISA v2.07 only.
This patch fixes it.

Fixes: 80eca687 ("target/ppc: moved vector even and odd multiplication to decodetree")
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Suggested-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220304175156.2012315-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

LLVM/Clang doesn't know the VSX registers when compiling with
-mabi=elfv1. Use only registers >= 32 and list them with their Altivec
name.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220304165417.1981159-6-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Based on GCC docs[1], we use the '-mpower8-vector' flag at config-time
to detect the toolchain support to the bcdsub instruction. LLVM/Clang
supports this flag since version 3.6[2], but the instruction and related
builtins were only added in LLVM 14[3]. In the absence of other means to
detect this support at config-time, we resort to __has_builtin to
identify the presence of __builtin_bcdsub at compile-time. If the
builtin is not available, the instruction is emitted with a ".long".

[1] https://gcc.gnu.org/onlinedocs/gcc-8.3.0/gcc/PowerPC-AltiVec_002fVSX-Built-in-Functions.html
[2] https://github.com/llvm/llvm-project/commit/59eb767e11d4ffefb5f55409524e5c8416b2b0db
[3] https://github.com/llvm/llvm-project/commit/c933c2eb334660c131f4afc9d194fafb0cec0423



Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220304165417.1981159-5-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Using __int128 with inline asm constraints like "v" generates incorrect
code when compiling with LLVM/Clang (e.g., only one doubleword of the
VSR is loaded). Instead, use a GPR pair to pass the 128-bits value and
load the VSR with mtvsrd/xxmrghd.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220304165417.1981159-4-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Change VSX Scalar Multiply-Add/Subtract Type-A/M Single Precision
helpers to use float64r32_muladd. This method should correctly handle
all rounding modes, so the workaround for float_round_nearest_even can
be dropped.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220304165417.1981159-3-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

LLVM/Clang does not support __builtin_mtfsf.

Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220304165417.1981159-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

GCC options pairs -mlittle/-mlittle-endian and -mbig/-mbig-endian are
equivalent on ppc64 architecture. However, Clang supports only long
version of the options.

Use longer form in configure to properly support both GCC and Clang
compiler. In addition, fix this issue in tcg test configure.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220131091714.4825-1-mrezanin@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

usb: fixes for ohci, xhci, mtp and redirect
audio: latency fixes
ui: opengl and cocoa fixes
firmware: ovmf tabel aprser fixes

# gpg: Signature made Fri 04 Mar 2022 14:18:47 GMT
# gpg:                using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/kraxel-20220304-pull-request: (35 commits)
  hw/display/vmware_vga: replace fprintf calls with trace events
  edid: Fix clock of Detailed Timing Descriptor
  softmmu/qdev-monitor: Add virtio-gpu-gl aliases
  ui/cocoa: Add Services menu
  ui/clipboard: fix use-after-free regression
  ui: do not create a surface when resizing a GL scanout
  ui/console: fix texture leak when calling surface_gl_create_texture()
  ui/console: fix crash when using gl context with non-gl listeners
  docs: Add spec of OVMF GUIDed table for SEV guests
  hw/i386: Replace magic number with field length calculation
  hw/i386: Improve bounds checking in OVMF table parsing
  coreaudio: Notify error in coreaudio_init_out
  hw/usb/redirect.c: Stop using qemu_oom_check()
  sdlaudio: fix samples vs. frames mix-up
  paaudio: fix samples vs. frames mix-up
  ossaudio: reduce effective playback buffer size
  dsoundaudio: reduce effective playback buffer size
  paaudio: reduce effective playback buffer size
  audio: restore mixing-engine playback buffer size
  Revert "audio: fix wavcapture segfault"
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

The general ternary logic operation can implement BITSEL.
Funnel the 4-operand operation into three variants of the
3-operand instruction, depending on input operand overlap.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

AVX512VL has a general ternary logic operation, VPTERNLOGQ,
which can implement NOT, ORC, NAND, NOR, EQV.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>