Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230831030904.1194667-3-richard.henderson@linaro.org>

Use generic routine for 64-bit carry-less multiply.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use the generic routine for 64-bit carry-less multiply.
Remove our local version of galois_multiply64.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use generic routine for 64-bit carry-less multiply.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use generic routine for 64-bit carry-less multiply.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use generic routines for 32-bit carry-less multiply.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use generic routines for 32-bit carry-less multiply.
Remove our local version of galois_multiply32.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use generic routines for 32-bit carry-less multiply.
Remove our local version of pmull_d.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use generic routines for 16-bit carry-less multiply.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use generic routines for 16-bit carry-less multiply.
Remove our local version of galois_multiply16.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use generic routines for 16-bit carry-less multiply.
Remove our local version of pmull_w.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use generic routines for 8-bit carry-less multiply.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use generic routines for 8-bit carry-less multiply.
Remove our local version of galois_multiply8.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Use generic routines for 8-bit carry-less multiply.
Remove our local version of pmull_h.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

x86_cpu_get_supported_cpuid() is generic and handles the different
accelerators. Use it instead of kvm_arch_get_supported_cpuid().

That fixes a link failure introduced by commit 3adce820
("target/i386: Remove unused KVM stubs") when QEMU is configured
as:

  $ ./configure --cc=clang \
    --target-list=x86_64-linux-user,x86_64-softmmu \
    --enable-debug

We were getting:

  [71/71] Linking target qemu-x86_64
  FAILED: qemu-x86_64
  /usr/bin/ld: libqemu-x86_64-linux-user.fa.p/target_i386_cpu.c.o: in function `cpu_x86_cpuid':
  cpu.c:(.text+0x1374): undefined reference to `kvm_arch_get_supported_cpuid'
  /usr/bin/ld: libqemu-x86_64-linux-user.fa.p/target_i386_cpu.c.o: in function `x86_cpu_filter_features':
  cpu.c:(.text+0x81c2): undefined reference to `kvm_arch_get_supported_cpuid'
  /usr/bin/ld: cpu.c:(.text+0x81da): undefined reference to `kvm_arch_get_supported_cpuid'
  /usr/bin/ld: cpu.c:(.text+0x81f2): undefined reference to `kvm_arch_get_supported_cpuid'
  /usr/bin/ld: cpu.c:(.text+0x820a): undefined reference to `kvm_arch_get_supported_cpuid'
  /usr/bin/ld: libqemu-x86_64-linux-user.fa.p/target_i386_cpu.c.o:cpu.c:(.text+0x8225): more undefined references to `kvm_arch_get_supported_cpuid' follow
  clang: error: linker command failed with exit code 1 (use -v to see invocation)
  ninja: build stopped: subcommand failed.

For the record, this is because '--enable-debug' disables
optimizations (CFLAGS=-O0).

While at this (un)optimization level GCC eliminate the
following dead code (CPP output of mentioned build):

 static void x86_cpu_get_supported_cpuid(uint32_t func, uint32_t index,
                                         uint32_t *eax, uint32_t *ebx,
                                         uint32_t *ecx, uint32_t *edx)
 {
     if ((0)) {
         *eax = kvm_arch_get_supported_cpuid(kvm_state, func, index, R_EAX);
         *ebx = kvm_arch_get_supported_cpuid(kvm_state, func, index, R_EBX);
         *ecx = kvm_arch_get_supported_cpuid(kvm_state, func, index, R_ECX);
         *edx = kvm_arch_get_supported_cpuid(kvm_state, func, index, R_EDX);
     } else if (0) {
         *eax = 0;
         *ebx = 0;
         *ecx = 0;
         *edx = 0;
     } else {
         *eax = 0;
         *ebx = 0;
         *ecx = 0;
         *edx = 0;
     }

Clang does not (see commit 2140cfa5 "i386: Fix build by
providing stub kvm_arch_get_supported_cpuid()").

Cc: qemu-stable@nongnu.org
Fixes: 3adce820 ("target/i386: Remove unused KVM stubs")
Reported-by: Kevin Wolf <kwolf@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230913093009.83520-4-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

x86_cpu_get_supported_cpuid() already checks for KVM/HVF
accelerators, so it is not needed to manually check it via
a call to accel_uses_host_cpuid() before calling it.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230913093009.83520-3-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In case more code is added after the kvm_hyperv_expand_features()
call, check its return value (since it can fail).

Fixes: 071ce4b0 ("i386: expand Hyper-V features during CPU feature expansion time")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230913093009.83520-2-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Enabling AP-passthrough(AP-pt) for PV-guest by using the new CPU
features for PV-AP-pt of KVM.

As usual QEMU first checks which CPU features are available and then
sets them if available and selected by user. An additional check is done
to verify that PV-AP can only be enabled if "regular" AP-pt is enabled
as well. Note that KVM itself does not enforce this restriction.

Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Message-ID: <20230823142219.1046522-6-seiden@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

kvm_s390_set_attr() is a misleading name as it only sets attributes for
the KVM_S390_VM_CRYPTO group. Therefore, rename it to
kvm_s390_set_crypto_attr().

Add new functions ap_available() and ap_enabled() to avoid code
duplication later.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Message-ID: <20230823142219.1046522-5-seiden@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

As per ISA:

"For CSRRWI, if rd=x0, then the instruction shall not read the CSR and
shall not cause any of the side effects that might occur on a CSR read."

trans_csrrwi() and trans_csrrw() call do_csrw() if rd=x0, do_csrw() calls
riscv_csrrw_do64(), via helper_csrw() passing NULL as *ret_value.

Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230808090914.17634-1-nikita.shubin@maquefel.me>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

According to the new spec, when vsiselect has a reserved value, attempts
from M-mode or HS-mode to access vsireg, or from VS-mode to access
sireg, should preferably raise an illegal instruction exception.

Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20230816061647.600672-1-tommy.wu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

When the rule-lock bypass (RLB) bit is set in the mseccfg CSR, the PMP
configuration lock bits must not apply. While this behavior is
implemented for the pmpcfgX CSRs, this bit is not respected for
changes to the pmpaddrX CSRs. This patch ensures that pmpaddrX CSR
writes work even on locked regions when the global rule-lock bypass is
enabled.

Signed-off-by: Leon Schuermann <leons@opentitan.org>
Reviewed-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230829215046.1430463-1-leon@is.currently.online>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

riscv_trigger_init() had been called on reset events that can happen
several times for a CPU and it allocated timers for itrigger. If old
timers were present, they were simply overwritten by the new timers,
resulting in a memory leak.

Divide riscv_trigger_init() into two functions, namely
riscv_trigger_realize() and riscv_trigger_reset() and call them in
appropriate timing. The timer allocation will happen only once for a
CPU in riscv_trigger_realize().

Fixes: 5a4ae64c ("target/riscv: Add itrigger support when icount is enabled")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230818034059.9146-1-akihiko.odaki@daynix.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Use the accelerated SubBytes/ShiftRows/AddRoundKey AES helper to
implement the first half of the key schedule derivation. This does not
actually involve shifting rows, so clone the same value into all four
columns of the AES vector to counter that operation.

Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230831154118.138727-1-ardb@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Commit 6df0b37e2ab breaks a --enable-debug build in a non-KVM
environment with the following error:

/usr/bin/ld: libqemu-riscv64-softmmu.fa.p/hw_intc_riscv_aplic.c.o: in function `riscv_kvm_aplic_request':
./qemu/build/../hw/intc/riscv_aplic.c:486: undefined reference to `kvm_set_irq'
collect2: error: ld returned 1 exit status

This happens because the debug build will poke into the
'if (is_kvm_aia(aplic->msimode))' block and fail to find a reference to
the KVM only function riscv_kvm_aplic_request().

There are multiple solutions to fix this. We'll go with the same
solution from the previous patch, i.e. add a kvm_enabled() conditional
to filter out the block. But there's a catch: riscv_kvm_aplic_request()
is a local function that would end up being used if the compiler crops
the block, and this won't work. Quoting Richard Henderson's explanation
in [1]:

"(...) the compiler won't eliminate entire unused functions with -O0"

We'll solve it by moving riscv_kvm_aplic_request() to kvm.c and add its
declaration in kvm_riscv.h, where all other KVM specific public
functions are already declared. Other archs handles KVM specific code in
this manner and we expect to do the same from now on.

[1] https://lore.kernel.org/qemu-riscv/d2f1ad02-eb03-138f-9d08-db676deeed05@linaro.org/



Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230830133503.711138-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

zicond is now codegen supported in both llvm and gcc.

This change allows seamless enabling/testing of zicond in downstream
projects. e.g. currently riscv-gnu-toolchain parses elf attributes
to create a cmdline for qemu but fails short of enabling it because of
the "x-" prefix.

Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>
Message-ID: <20230808181715.436395-1-vineetg@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

In the same emulated RISC-V host, the 'host' KVM CPU takes 4 times
longer to boot than the 'rv64' KVM CPU.

The reason is an unintended behavior of riscv_cpu_satp_mode_finalize()
when satp_mode.supported = 0, i.e. when cpu_init() does not set
satp_mode_max_supported(). satp_mode_max_from_map(map) does:

31 - __builtin_clz(map)

This means that, if satp_mode.supported = 0, satp_mode_supported_max
wil be '31 - 32'. But this is C, so satp_mode_supported_max will gladly
set it to UINT_MAX (4294967295). After that, if the user didn't set a
satp_mode, set_satp_mode_default_map(cpu) will make

cfg.satp_mode.map = cfg.satp_mode.supported

So satp_mode.map = 0. And then satp_mode_map_max will be set to
satp_mode_max_from_map(cpu->cfg.satp_mode.map), i.e. also UINT_MAX. The
guard "satp_mode_map_max > satp_mode_supported_max" doesn't protect us
here since both are UINT_MAX.

And finally we have 2 loops:

        for (int i = satp_mode_map_max - 1; i >= 0; --i) {

Which are, in fact, 2 loops from UINT_MAX -1 to -1. This is where the
extra delay when booting the 'host' CPU is coming from.

Commit 43d1de32 already set a precedence for satp_mode.supported = 0
in a different manner. We're doing the same here. If supported == 0,
interpret as 'the CPU wants the OS to handle satp mode alone' and skip
satp_mode_finalize().

We'll also put a guard in satp_mode_max_from_map() to assert out if map
is 0 since the function is not ready to deal with it.

Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes: 6f23aaeb ("riscv: Allow user to set the satp mode")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230817152903.694926-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

The Svadu specification updated the name of the *envcfg bit from
HADE to ADUE.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230816141916.66898-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

We create a vAIA chip by using the KVM_DEV_TYPE_RISCV_AIA and then set up
the chip with the KVM_DEV_RISCV_AIA_GRP_* APIs.
We also extend KVM accelerator to specify the KVM AIA mode. The "riscv-aia"
parameter is passed along with --accel in QEMU command-line.
1) "riscv-aia=emul": IMSIC is emulated by hypervisor
2) "riscv-aia=hwaccel": use hardware guest IMSIC
3) "riscv-aia=auto": use the hardware guest IMSICs whenever available
                     otherwise we fallback to software emulation.

Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-4-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

We check the in-kernel irqchip support when using KVM acceleration.

Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-3-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Commit a47842d1 ("riscv: Add support for the Zfa extension") implemented the zfa extension.
However, it has some typos for fleq.d and fltq.d. Both of them misused the fltq.s
helper function.

Fixes: a47842d1 ("riscv: Add support for the Zfa extension")
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230728003906.768-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

RVA23 Profiles states:
The RVA23 profiles are intended to be used for 64-bit application
processors that will run rich OS stacks from standard binary OS
distributions and with a substantial number of third-party binary user
applications that will be supported over a considerable length of time
in the field.

The chapter 4 of the unprivileged spec introduces the Zihintntl extension
and Zihintntl is a mandatory extension presented in RVA23 Profiles, whose
purpose is to enable application and operating system portability across
different implementations. Thus the DTS should contain the Zihintntl ISA
string in order to pass to software.

The unprivileged spec states:
Like any HINTs, these instructions may be freely ignored. Hence, although
they are described in terms of cache-based memory hierarchies, they do not
mandate the provision of caches.

These instructions are encoded with non-used opcode, e.g. ADD x0, x0, x2,
which QEMU already supports, and QEMU does not emulate cache. Therefore
these instructions can be considered as a no-op, and we only need to add
a new property for the Zihintntl extension.

Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Message-ID: <20230726074049.19505-2-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

These are WARL fields - zero out the bits for unavailable counters and
special case the TM bit in mcountinhibit which is hardwired to zero.
This patch achieves this by modifying the value written so that any use
of the field will see the correctly masked bits.

Tested by modifying OpenSBI to write max value to these CSRs and upon
subsequent read the appropriate number of bits for number of PMUs is
enabled and the TM bit is zero in mcountinhibit.

Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20230802124906.24197-1-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

This commit adds support for the Zvksed vector-crypto extension, which
consists of the following instructions:

* vsm4k.vi
* vsm4r.[vv,vs]

Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.

Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
[lawrence.hunter@codethink.co.uk: Moved SM4 functions from
crypto_helper.c to vcrypto_helper.c]
[nazar.kazakov@codethink.co.uk: Added alignment checks, refactored code to
use macros, and minor style changes]
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-16-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Allows sharing of sm4_subword between different targets.

Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-14-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

This commit adds support for the Zvkg vector-crypto extension, which
consists of the following instructions:

* vgmul.vv
* vghsh.vv

Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.

Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvkg property]
[max.chou@sifive.com: Replaced uint by int for cross win32 build]
Message-ID: <20230711165917.2629866-13-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

This commit adds support for the Zvksh vector-crypto extension, which
consists of the following instructions:

* vsm3me.vv
* vsm3c.vi

Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.

Co-authored-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvksh property]
Message-ID: <20230711165917.2629866-12-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

This commit adds support for the Zvknh vector-crypto extension, which
consists of the following instructions:

* vsha2ms.vv
* vsha2c[hl].vv

Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.

Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvknha & x-zvknhb properties]
[max.chou@sifive.com: Replaced SEW selection to happened during
translation]
Message-ID: <20230711165917.2629866-11-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

This commit adds support for the Zvkned vector-crypto extension, which
consists of the following instructions:

* vaesef.[vv,vs]
* vaesdf.[vv,vs]
* vaesdm.[vv,vs]
* vaesz.vs
* vaesem.[vv,vs]
* vaeskf1.vi
* vaeskf2.vi

Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.

Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Co-authored-by: William Salmon <will.salmon@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: William Salmon <will.salmon@codethink.co.uk>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Imported aes-round.h and exposed x-zvkned
property]
[max.chou@sifive.com: Fixed endian issues and replaced the vstart & vl
egs checking by helper function]
[max.chou@sifive.com: Replaced bswap32 calls in aes key expanding]
Message-ID: <20230711165917.2629866-10-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

This commit adds support for the Zvbb vector-crypto extension, which
consists of the following instructions:

* vrol.[vv,vx]
* vror.[vv,vx,vi]
* vbrev8.v
* vrev8.v
* vandn.[vv,vx]
* vbrev.v
* vclz.v
* vctz.v
* vcpop.v
* vwsll.[vv,vx,vi]

Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.

Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: William Salmon <will.salmon@codethink.co.uk>
Co-authored-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
[max.chou@sifive.com: Fix imm mode of vror.vi]
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: William Salmon <will.salmon@codethink.co.uk>
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Dickon Hood <dickon.hood@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvbb property]
Message-ID: <20230711165917.2629866-9-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>