Adds support for Calxeda's Highbank SoC.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Support passing a board ID value to the kernel in r1
that is more than 16 bits wide. This is needed to pass
the '-1 == invalid' value for boards which only support
device tree booting.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Mark Langsdorf <mark.langsdorf@calxeda.com>

Create two functions, write_secondary_boot() and secondary_cpu_reset_hook(),
to allow platforms more control of how secondary CPUs are brought up. The
new functions default to NULL and aren't called unless they are populated
so there are no changes to existing platform models.

Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Add support for ahci on sysbus.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

This adds very basic support for the xgmac ethernet core. Missing things
include:

- statistics counters
- WoL support
- rx checksum offload
- chained descriptors (only linear descriptor ring)
- broadcast and multicast handling

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Remove target dependencies and compile Cirrus VGA in hwlib.

Address masking can be removed since memory API handles that now.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Instead of each target knowing or guessing the guest page size,
just pass the desired size of dirtied memory area.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Fix handling of cases like start = 0xfff, length = 2.

Change length to ram_addr_t to handle larger lengths.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Flag -nodefaults should also imply no VGA. This was broken in
a369da5f.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

* qemu-kvm/uq/master:
  kvm: Activate in-kernel irqchip support
  kvm: x86: Add user space part for in-kernel IOAPIC
  kvm: x86: Add user space part for in-kernel i8259
  kvm: x86: Add user space part for in-kernel APIC
  kvm: x86: Establish IRQ0 override control
  kvm: Introduce core services for in-kernel irqchip support
  memory: Introduce memory_region_init_reservation
  ioapic: Factor out base class for KVM reuse
  ioapic: Drop post-load irr initialization
  i8259: Factor out base class for KVM reuse
  i8259: Completely privatize PicState
  apic: Open-code timer save/restore
  apic: Factor out base class for KVM reuse
  apic: Introduce apic_report_irq_delivered
  apic: Inject external NMI events via LINT1
  apic: Stop timer on reset
  kvm: Move kvmclock into hw/kvm folder
  msi: Generalize msix_supported to msi_supported
  hyper-v: initialize Hyper-V CPUID leaves.
  hyper-v: introduce Hyper-V support infrastructure.

Conflicts:
	Makefile.target

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

* afaerber/prep-up:
  prep: Use i82378 PCI->ISA bridge for 'prep' machine
  prep: Add i82378 PCI-to-ISA bridge emulation
  prep: Add i82374 DMA emulation
  MAINTAINERS: Add PCI host bridge files to PReP machine
  prep: qdev'ify Raven host bridge (SysBus)
  prep_pci: Update I/O to MemoryRegion ops
  prep_pci: Simplify I/O endianness
  prep: qdev'ify Raven host bridge (PCIDevice)
  prep: Use ISA m48t59
  prep: Fix offset of BIOS MemoryRegion

Otherwise we can write beyond the buffer and corrupt memory.  This is tracked
as CVE-2012-0029.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Commit 793a137a (target-sparc:
Implement BMASK/BSHUFFLE.) introduced a stray usage of softfloat uint64
type.

Use uint64_t instead.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Fix the name of the init function.

Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Improve VGA selection logic, push check for device availabilty to vl.c.
Create the devices at board level unconditionally.

Remove now unused pci_try_create*() functions.

Make PCI VGA devices optional.

Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Rename SysBus device from 'grackle' to 'grackle-pcihost' to resolve a
name conflict.

Also mark both devices as no_user.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

We call pci_host_config_{read,write}_common() which perform PCI config
accesses. However they don't do all limit checking the way we expect
it to.

So let's introduce a small wrapper around them, making them behave the
way we would without touching generic code.

This patch is based on a patch by David Gibson which put this logic into
the generic code.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>

Just like prep_pci.c, these were not associated with any MAINTAINERS
section, including PCI.

Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

Currently on the pseries machine the SLOF firmware is used normally,
but we bypass it when -kernel is specified.  Having these two

different boot paths can cause some confusion.

In particular at present we need to "probe" the (emulated) PCI bus and
produce device tree nodes for the PCI devices in qemu, for the -kernel
case.  In the SLOF case, it takes the device tree from qemu adds some
stuff to it then passes it on to the kernel.

It's been decided that a better approach is to always boot through
SLOF, even when using -kernel.  WIth this approach we can leave PCI
probing and device node creation to SLOF in all cases which removes a
bunch of code in qemu, and avoids iterating the PCI devices from the
machine specific init code which we're not supposed to do.

This patch changes qemu to always boot through SLOF, and not to create
PCI nodes.  Simultaneously it updates the included version of SLOF
(submodule and binary image) to one which supports (and requires) the
new approach.

The new SLOF version also includes a number of unrelated enhancements:
support for booting from virtio-pci devices and e1000, greatly
improved FCode support and many bugfixes.  It also makes SLOF ready to
be used even when specifying a kernel on the qemu command line.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>

The pseries machine expects a para-virtualized guest and so supplies RTAS
functions (via a hypercall) for performing PCI config space access.
Currently the implementation of these calls into
pci_default_{read,write}_config().  However this would be incorrect for
any PCI device which overrides the default config read/write functions.
AFAICT there's only one such device today, but we should still get it
right.  In addition the pci_host_config_{read,write}_common() functions
which do correctly do this dispatch, perform bounds checking on the config
space address, lack of which currently leads to an exploitable bug.

This patch corrects the problem.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>

On the pseries machine (which expexts a paravirtualized guest), guest
access to PCI config space is via host-provided RTAS functions.  This
patch extends these RTAS functions to permit access to PCI extended
config space, as specified in PAPR.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>

Back when I made patches introducing dma_addr_t and various PCI DMA
wrapper functions, I made a mistake.  The bmdma_addr_{read,write} functions
need to take target_phys_addr_t not dma_addr_t, since they are assigned
to MemoryRegionOps callbacks.

This patch corrects my error.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>

This patch adds several auto-generated files to .gitignore which were
previously missing.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>

The kvm_get_dirty_pages_log_range() function uses two address
variables to step through the monitored memory region to update the
dirty log.  However, these variables have type unsigned long, which
can overflow if running a 64-bit guest with a 32-bit qemu binary.

This patch changes these to target_phys_addr_t which will have the
correct size.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>

load_image_targphys() gets passed a max size for the file, but doesn't
enforce it at all. Add a check and return -1 (error) if the file is
too big, without loading it.  Fix the bracing style in the function
while we're at it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>

When accessing the device specific virtio config space, we memcpy
the data into a variable in QEMU. At that point we're basically
pulling host endianness into the game which is a really bad idea.

So instead, let's use the target specific load/store helpers for
memory pointers which fetch things in target endianness. The whole
array is already populated in target endianness anyways
(see virtio-blk).

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>

The virtio config area in PIO space is a bit special. The initial
header is little endian but the rest (device specific) is guest
native endian.

The PIO accessors for PCI on machines that don't have native IO ports
assume that all PIO is little endian, which works fine for everything
except the above.

A complicated way to fix it would be to split the BAR into two memory
regions with different endianess settings, but this isn't practical
to do, besides, the PIO code doesn't honor region endianness anyway
(I have a patch for that too but it isn't necessary at this stage).

So I decided to go for the quick fix instead which consists of
reverting the swap in virtio-pci in selected places, hoping that when
we eventually do a "v2" of the virtio protocols, we sort that out once
and for all using a fixed endian setting for everything.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf: keep virtio in libhw and determine endianness through a
        helper function in exec.c]
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>

Now that we have the SoC init function in the same file, let's integrate
it with the board initialization.

While at it, also make use of the newly qdev'ified PCI host controller.

Signed-off-by: Alexander Graf <agraf@suse.de>

The separation of ppc440 and ppc440_bamboo makes some sense, since ppc440
is the SoC while ppc440_bamboo is the actual board. But the separation
makes things harder for us for no good reason, so let's just fold them
in together with each other.

Signed-off-by: Alexander Graf <agraf@suse.de>

Due to popular demand, this qdevifies the PCI host controller of 4xx SoCs
the same way as e500.

We have to introduce a small stub function for pci init that will be
removed in a later patch, once we qdev'ified the board, to keep the build
working.

Signed-off-by: Alexander Graf <agraf@suse.de>

Tabs followed by spaces are a no-go. My editor shows it red, distracting
me from actual work! :)

Signed-off-by: Alexander Graf <agraf@suse.de>

Nobody needs to run bamboo in 0.12 compat mode. Remove the machine.

Signed-off-by: Alexander Graf <agraf@suse.de>

Now that we have 440 TLB emulation, we can also support running the 440EP
CPU target in system emulation mode.

Signed-off-by: Alexander Graf <agraf@suse.de>

Today we're exposing a Virtex 440 CPU to the guest despite the fact
that we're telling the guest that we're running on a 440EP one in the
device tree.

So let's better default to a real 440EP to make things synced again.

Signed-off-by: Alexander Graf <agraf@suse.de>

Recent dtc doesn't compile our dts anymore. Change all hex numbers to have
0x prefixes, indicate the old version and recompile using recent dtc.

This doesn't change any semantics in the device tree.

Signed-off-by: Alexander Graf <agraf@suse.de>

When running a 440 target, we currently get invalid irq_num values (-1)
which completely confuse the IRQ setting code.

This is most likely due to the missing qdev conversion.

While this shouldn't happen in the first place and should really rather
be fixed by converting the target, I dislike segfaults. So for now, let's
just print a warning and ignore invalid irq_num values.

Signed-off-by: Alexander Graf <agraf@suse.de>