If we use the system Meson but it is too old, the subsequent "meson configure"
will fail.  Always use the submodule when building with CFI.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Usually Meson uses pre-serialized information in meson-private to
speed up re-runs.  This is not possible for version changes, where
Meson instead rebuilds the serialized information using cmd_line.txt.
In some cases cmd_line.txt can contain stale information, since it
is not rebuild except when "meson setup" is invoked.  Update it in
the configure script to allow upgrading our Meson version.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Replace Windows specific macro with a more generic feature detection
macro. Allows slirp smb feature to be disabled manually as well.

Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-Id: <20210315180341.31638-5-j@getutm.app>
[Use $default_feature as the default. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Right now, rate limiting is protected by the AioContext mutex, which is
taken for example both by the block jobs and by qmp_block_job_set_speed
(via find_block_job).

We would like to remove the dependency of block layer code on the
AioContext mutex, since most drivers and the core I/O code are already
not relying on it.  However, there is no existing lock that can easily
be taken by both ratelimit_set_speed and ratelimit_calculate_delay,
especially because the latter might run in coroutine context (and
therefore under a CoMutex) but the former will not.

Since concurrent calls to ratelimit_calculate_delay are not possible,
one idea could be to use a seqlock to get a snapshot of slice_ns and
slice_quota.  But for now keep it simple, and just add a mutex to the
RateLimit struct; block jobs are generally not performance critical to
the point of optimizing the clock cycles spent in synchronization.

This also requires the introduction of init/destroy functions, so
add them to the two users of ratelimit.h.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Kamil Rytarowski <kamil@NetBSD.org>
Signed-off-by: Reinoud Zandijk <reinoud@NetBSD.org>

Message-Id: <20210402202535.11550-5-reinoud@NetBSD.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Kamil Rytarowski <kamil@NetBSD.org>
Signed-off-by: Reinoud Zandijk <reinoud@NetBSD.org>

Message-Id: <20210402202535.11550-4-reinoud@NetBSD.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Kamil Rytarowski <kamil@NetBSD.org>
Signed-off-by: Reinoud Zandijk <reinoud@NetBSD.org>

Message-Id: <20210402202535.11550-3-reinoud@NetBSD.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Kamil Rytarowski <kamil@NetBSD.org>
Signed-off-by: Reinoud Zandijk <reinoud@NetBSD.org>

Message-Id: <20210402202535.11550-2-reinoud@NetBSD.org>
[Check for nvmm_vcpu_stop. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

On Windows with glib <2.50, g_poll is redefined to use the variant
defined in util/oslib-win32.c.  Use the same name in the declaration
and definition for ease of grepping.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

MIPS patches queue

- Fix CACHEE opcode
- Add missing CP0 checks to nanoMIPS RDPGPR / WRPGPR opcodes
- Remove isa_get_irq() call in PIIX4 south bridge
- Add various missing fields to the MIPS CPU migration vmstate
- Lot of code moved around to allow TCG or KVM only builds
- Restrict non-virtualized machines to TCG
- Add KVM mips64el cross-build jobs to gitlab-ci

# gpg: Signature made Sun 02 May 2021 15:56:51 BST
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd/tags/mips-20210502: (36 commits)
  gitlab-ci: Add KVM mips64el cross-build jobs
  hw/mips: Restrict non-virtualized machines to TCG
  target/mips: Move TCG source files under tcg/ sub directory
  target/mips: Move CP0 helpers to sysemu/cp0.c
  target/mips: Move exception management code to exception.c
  target/mips: Move TLB management helpers to tcg/sysemu/tlb_helper.c
  target/mips: Move helper_cache() to tcg/sysemu/special_helper.c
  target/mips: Move Special opcodes to tcg/sysemu/special_helper.c
  target/mips: Restrict CPUMIPSTLBContext::map_address() handlers scope
  target/mips: Move tlb_helper.c to tcg/sysemu/
  target/mips: Restrict mmu_init() to TCG
  target/mips: Move sysemu TCG-specific code to tcg/sysemu/ subfolder
  target/mips: Restrict cpu_mips_get_random() / update_pagemask() to TCG
  target/mips: Move physical addressing code to sysemu/physaddr.c
  target/mips: Move sysemu specific files under sysemu/ subfolder
  target/mips: Move cpu_signal_handler definition around
  target/mips: Add simple user-mode mips_cpu_tlb_fill()
  target/mips: Add simple user-mode mips_cpu_do_interrupt()
  target/mips: Introduce tcg-internal.h for TCG specific declarations
  meson: Introduce meson_user_arch source set for arch-specific user-mode
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Minor cleanups.
Finish the rest of the hexagon integer instructions.

# gpg: Signature made Sun 02 May 2021 15:38:17 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-hex-20210502: (31 commits)
  Hexagon (target/hexagon) CABAC decode bin
  Hexagon (target/hexagon) load into shifted register instructions
  Hexagon (target/hexagon) load and unpack bytes instructions
  Hexagon (target/hexagon) bit reverse (brev) addressing
  Hexagon (target/hexagon) circular addressing
  Hexagon (target/hexagon) add A4_addp_c/A4_subp_c
  Hexagon (target/hexagon) add A6_vminub_RdP
  Hexagon (target/hexagon) add A5_ACS (vacsh)
  Hexagon (target/hexagon) add F2_sfinvsqrta
  Hexagon (target/hexagon) add F2_sfrecipa instruction
  Hexagon (target/hexagon) compile all debug code
  Hexagon (target/hexagon) move QEMU_GENERATE to only be on during macros.h
  Hexagon (target/hexagon) cleanup reg_field_info definition
  Hexagon (target/hexagon) cleanup ternary operators in semantics
  Hexagon (target/hexagon) use softfloat for float-to-int conversions
  Hexagon (target/hexagon) replace float32_mul_pow2 with float32_scalbn
  Hexagon (target/hexagon) use softfloat default NaN and tininess
  Hexagon (target/hexagon) change type of softfloat_roundingmodes
  Hexagon (target/hexagon) remove unused carry_from_add64 function
  Hexagon (target/hexagon) change variables from int to bool when appropriate
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Add a new job to cross-build the mips64el target without
the TCG accelerator (IOW: only KVM accelerator enabled).

Only build the mips64el target which is known to work
and has users.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-31-f4bug@amsat.org>

Only the malta and loongson3-virt machines support KVM.

Restrict the other machines to TCG:

 - mipssim
 - magnum
 - pica61
 - fuloong2e
 - boston

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-30-f4bug@amsat.org>

To ease maintenance, move all TCG specific files under the tcg/
sub-directory. Adapt the Meson machinery.

The following prototypes:
- mips_tcg_init()
- mips_cpu_do_unaligned_access()
- mips_cpu_do_transaction_failed()
can now be restricted to the "tcg-internal.h" header.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-29-f4bug@amsat.org>

Opcodes accessing Coprocessor 0 are privileged.
Move the CP0 helpers to sysemu/ and simplify the #ifdef'ry.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-28-f4bug@amsat.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-27-f4bug@amsat.org>

Move TLB management helpers to tcg/sysemu/tlb_helper.c.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-26-f4bug@amsat.org>

Move helper_cache() to tcg/sysemu/special_helper.c.

The CACHE opcode is privileged and is not accessible in user
emulation. However we get a link failure when restricting the
symbol to sysemu. For now, add a stub helper to satisfy linking,
which abort if ever called.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-25-f4bug@amsat.org>

Move the Special opcodes helpers to tcg/sysemu/special_helper.c.

Since mips_io_recompile_replay_branch() is set as
CPUClass::io_recompile_replay_branch handler in cpu.c,
we need to declare its prototype in "tcg-internal.h".

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-24-f4bug@amsat.org>

The 3 map_address() handlers are local to tlb_helper.c,
no need to have their prototype declared publically.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-23-f4bug@amsat.org>

Move tlb_helper.c to the tcg/sysemu/ subdir, along with
the following 3 declarations to tcg-internal.h:
- cpu_mips_tlb_flush()
- cpu_mips_translate_address()
- r4k_invalidate_tlb()

Simplify tlb_helper.c #ifdef'ry because files in tcg/sysemu/
are only build when sysemu mode is configured.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-22-f4bug@amsat.org>

mmu_init() is only required by TCG accelerator.
Restrict its declaration and call to TCG.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-21-f4bug@amsat.org>

Move cp0_helper.c and mips-semi.c to the new tcg/sysemu/ folder,
adapting the Meson machinery.

Move the opcode definitions to tcg/sysemu_helper.h.inc.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-20-f4bug@amsat.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-19-f4bug@amsat.org>

Declare get_physical_address() with local scope and move it along
with mips_cpu_get_phys_page_debug() to sysemu/physaddr.c new file.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-18-f4bug@amsat.org>

Move sysemu-specific files under the new sysemu/ subfolder
and adapt the Meson machinery.
Update the KVM MIPS entry in MAINTAINERS.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-17-f4bug@amsat.org>

We have 2 blocks guarded with #ifdef for sysemu, which
are simply separated by the cpu_signal_handler definition.

To simplify the following commits which involve various
changes in internal.h, first join the sysemu-guarded blocks.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-16-f4bug@amsat.org>

tlb_helper.c's #ifdef'ry hides a quite simple user-mode
implementation of mips_cpu_tlb_fill().

Copy the user-mode implementation (without #ifdef'ry) to
tcg/user/helper.c and simplify tlb_helper.c's #ifdef'ry.

This will allow us to restrict tlb_helper.c to sysemu.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-15-f4bug@amsat.org>

The #ifdef'ry hides that the user-mode implementation of
mips_cpu_do_interrupt() simply sets exception_index = EXCP_NONE.

Add this simple implementation to tcg/user/tlb_helper.c, and
the corresponding Meson machinery to build this file when user
emulation is configured.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-14-f4bug@amsat.org>

We will gradually move TCG-specific declarations to a new local
header: "tcg-internal.h". To keep review simple, first add this
header with 2 TCG prototypes, which we are going to move in the
next 2 commits.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-13-f4bug@amsat.org>

Similarly to the 'target_softmmu_arch' source set which allows
to restrict target-specific sources to system emulation, add
the equivalent 'target_user_arch' set for user emulation.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-12-f4bug@amsat.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-11-f4bug@amsat.org>

Currently cpu_mips_translate_address() calls raise_mmu_exception(),
and do_translate_address() calls cpu_loop_exit_restore().

This API split is dangerous, we could call cpu_mips_translate_address
without returning to the main loop.

As there is only one caller, it is trivial (and safer) to merge
do_translate_address() back to cpu_mips_translate_address().

Reported-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-10-f4bug@amsat.org>

Rename set_pc() as mips_env_set_pc(), declare it inlined
and use it in cpu.c and op_helper.c.

Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210428170410.479308-9-f4bug@amsat.org>

Turn printfpr() macro into a proper function: fpu_dump_fpr().

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-8-f4bug@amsat.org>

As mips_cpu_dump_state() is only used once to initialize the
CPUClass::dump_state handler, we can move it to cpu.c to keep
it symbol local.
Beside, this handler is used by all accelerators, while the
translate.c file targets TCG.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-7-f4bug@amsat.org>

Since all entries are no more than 4 bytes (including nul
terminator), can save space and pie runtime relocations by
declaring regnames[] as array of 4 const char.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-6-f4bug@amsat.org>

The CPU/FPU regnames[] arrays is used in mips_tcg_init() and
mips_cpu_dump_state(), which while being in translate.c is
not specific to TCG.

To be able to move mips_cpu_dump_state() to cpu.c, which is
compiled for all accelerator, we need to make the regnames[]
arrays global to target/mips/ by declaring them in "internal.h".

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-5-f4bug@amsat.org>

mips_cpu_reset() is used by all accelerators, and calls
msa_reset(), which is defined in msa_helper.c.

Beside msa_reset(), the rest of msa_helper.c is only useful
to the TCG accelerator. To be able to restrict this helper
file to TCG, we need to move msa_reset() out of it.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-4-f4bug@amsat.org>