In 4146b46c42e0989cb5842e04d88ab6ccb1713a48 (block: Produce zeros when
protocols reading beyond end of file), we break qemu-iotests ./check
-qcow2 022. This happens because qcow2 temporarily sets ->growable = 1
for vmstate accesses (which are stored beyond the end of regular image
data).

We introduce the bs->zero_beyond_eof to allow qcow2_load_vmstate() to
disable ->zero_beyond_eof temporarily in addition to enable ->growable.

[Since the broken patch "block: Produce zeros when protocols reading
beyond end of file" has not been merged yet, I have applied this fix
*first* and will then apply the next patch to keep the tree bisectable.
-- Stefan]

Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

By the time that qemu 1.7 will be released, enough time will have passed
since qemu 1.1, which is the first version to understand version 3
images, that changing the default shouldn't hurt many people any more
and the benefits of using the new format outweigh the pain.

qemu-iotests already runs with compat=1.1 by default.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

target-arm queue

# gpg: Signature made Tue 20 Aug 2013 08:56:28 AM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found

# By Peter Maydell (20) and Peter Chubb (1)
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20130820: (21 commits)
  hw/timer/imx_epit: Simplify and fix imx_epit implementation
  default-configs: Fix A9MP and A15MP config names
  hw/cpu/a15mpcore: Wire generic timer outputs to GIC inputs
  target-arm: Implement the generic timer
  target-arm: Support coprocessor registers which do I/O
  target-arm: Allow raw_read() and raw_write() to handle 64 bit regs
  hw/arm/pic_cpu: Remove the now-unneeded arm_pic_init_cpu()
  hw/arm/xilinx_zynq: Don't use arm_pic_init_cpu()
  hw/arm/vexpress: Don't use arm_pic_init_cpu()
  hw/arm/versatilepb: Don't use arm_pic_init_cpu()
  hw/arm/strongarm: Don't use arm_pic_init_cpu()
  hw/arm/realview: Don't use arm_pic_init_cpu()
  hw/arm/omap*: Don't use arm_pic_init_cpu()
  hw/arm/musicpal: Don't use arm_pic_init_cpu()
  hw/arm/kzm: Don't use arm_pic_init_cpu()
  hw/arm/integratorcp: Don't use arm_pic_init_cpu()
  hw/arm/highbank: Don't use arm_pic_init_cpu()
  hw/arm/exynos4210: Don't use arm_pic_init_cpu()
  hw/arm/armv7m: Don't use arm_pic_init_cpu()
  target-arm: Make IRQ and FIQ gpio lines on the CPU object
  ...

Message-id: 1377007680-4934-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>

# By Stefan Hajnoczi
# Via Stefan Hajnoczi
* stefanha/block-next:
  aio: drop io_flush argument
  tests: drop event_active_cb()
  thread-pool: drop thread_pool_active()
  dataplane/virtio-blk: drop flush_true() and flush_io()
  block/ssh: drop return_true()
  block/sheepdog: drop have_co_req() and aio_flush_request()
  block/rbd: drop qemu_rbd_aio_flush_cb()
  block/nbd: drop nbd_have_request()
  block/linux-aio: drop qemu_laio_completion_cb()
  block/iscsi: drop iscsi_process_flush()
  block/gluster: drop qemu_gluster_aio_flush_cb()
  block/curl: drop curl_aio_flush()
  aio: stop using .io_flush()
  tests: adjust test-thread-pool to new aio_poll() semantics
  tests: adjust test-aio to new aio_poll() semantics
  dataplane/virtio-blk: check exit conditions before aio_poll()
  block: stop relying on io_flush() in bdrv_drain_all()
  block: ensure bdrv_drain_all() works during bdrv_delete()

Message-id: 1376921877-9576-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>

# By Richard Henderson
# Via Richard Henderson
* rth/axp-next:
  target-alpha: Implement the typhoon iommu
  target-alpha: Consider the superpage when threading and ending TBs
  target-alpha: Use goto_tb in call_pal
  target-alpha: Implement call_pal without an exception

Message-id: 1376720412-2165-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>

QOM CPUState refactorings / X86CPU

* gdbstub coprocessor register count bugfix
* QOM instance_post_init infrastructure to override dynamic properties
* X86CPU HyperV preparations for CPU subclasses

# gpg: Signature made Fri 16 Aug 2013 11:49:02 AM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Eduardo Habkost (3) and others
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony:
  cpus: Use cpu_is_stopped() efficiently
  target-i386: Move hyperv_* static globals to X86CPU
  qdev: Set globals in instance_post_init function
  qom: Introduce instance_post_init hook
  tests: Unit tests for qdev global properties handling
  gdbstub: Fix gdb_register_coprocessor() register counting

When imx_epit.c was last refactored, a common usecase (comparison
register zero) broke.  This patch fixes that, and simplifies the code
yet more.  It also fixes a major thinko in the reset path --- the
wrong bits in the control register were being cleared.

Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Reviewed-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

When individual CONFIG_ switches for the A9MPcore and A15MPcore
devices were created, they were inadvertently given incorrect names
(CONFIG_ARM9MPCORE and CONFIG_ARM15MPCORE). These CPUs are
"Cortex-A9MP" and "Cortex-A15MP", and in particular the ARM9 is
a different (rather older) CPU than the Cortex-A9. Rename the
CONFIG_ switches to bring them into line with the source file
names and CPU names.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1376056215-26391-1-git-send-email-peter.maydell@linaro.org

Now our A15 CPU implements the generic timers, we can wire them
up to the appropriate inputs on the GIC.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1376065080-26661-5-git-send-email-peter.maydell@linaro.org

The ARMv7 architecture specifies a 'generic timer' which is implemented
via cp15 registers. Newer kernels will prefer to use this rather than
a devboard-level timer. Implement the generic timer for TCG; for KVM
we will already use the hardware's virtualized timer for this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1376065080-26661-4-git-send-email-peter.maydell@linaro.org

Add an ARM_CP_IO flag which an ARMCPRegInfo definition can use to
indicate that the register's implementation does I/O and thus
its accesses need to be surrounded by gen_io_start()/gen_io_end()
in order for icount to work. Most notably, cp registers which
implement clocks or timers need this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1376065080-26661-3-git-send-email-peter.maydell@linaro.org

Extend the raw_read() and raw_write() helper accessors so that
they can be used for 64 bit registers as well as 32 bit registers.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1376065080-26661-2-git-send-email-peter.maydell@linaro.org

Now all the boards have been converted arm_pic_init_cpu()
is unused and can just be deleted.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-15-git-send-email-peter.maydell@linaro.org

Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-14-git-send-email-peter.maydell@linaro.org

Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-13-git-send-email-peter.maydell@linaro.org

Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-12-git-send-email-peter.maydell@linaro.org

Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-11-git-send-email-peter.maydell@linaro.org

Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-10-git-send-email-peter.maydell@linaro.org

Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-9-git-send-email-peter.maydell@linaro.org

Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-8-git-send-email-peter.maydell@linaro.org

Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-7-git-send-email-peter.maydell@linaro.org

Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-6-git-send-email-peter.maydell@linaro.org

Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-5-git-send-email-peter.maydell@linaro.org

Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-4-git-send-email-peter.maydell@linaro.org

Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-3-git-send-email-peter.maydell@linaro.org

Now that ARMCPU is a subclass of DeviceState, we can make the
CPU's inbound IRQ and FIQ lines be simply gpio lines, which
means we can remove the odd arm_pic shim.

We retain the arm_pic_init_cpu() function as a backwards
compatibility shim layer so we can convert the board models
to get the IRQ and FIQ lines directly from the ARMCPU
object one at a time.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-2-git-send-email-peter.maydell@linaro.org

The 'int' loglevel for recording interrupts and exceptions
requires support in the target-specific code. Implement
it for ARM. This improves debug logging in some situations
that were otherwise pretty opaque, such as when we fault
trying to execute at an exception vector address, which
would otherwise cause an infinite loop of taking exceptions
without any indication in the debug log of what was going on.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1375700771-21665-1-git-send-email-peter.maydell@linaro.org

The .io_flush() handler no longer exists and has no users.  Drop the
io_flush argument to aio_set_fd_handler() and related functions.

The AioFlushEventNotifierHandler and AioFlushHandler typedefs are no
longer used and are dropped too.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Drop the io_flush argument to aio_set_event_notifier().

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

.io_flush() is no longer called so drop thread_pool_active().  The block
layer is the only thread-pool.c user and it already tracks in-flight
requests, therefore we do not need thread_pool_active().

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

.io_flush() is no longer called so drop flush_true() and flush_io().

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

.io_flush() is no longer called so drop return_true().

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

.io_flush() is no longer called so drop have_co_req() and
aio_flush_request().

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

.io_flush() is no longer called so drop qemu_rbd_aio_flush_cb().
qemu_aio_count is unused now so drop it too.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

.io_flush() is no longer called so drop nbd_have_request().  We cannot
drop in_flight since it is still used by other block/nbd.c code.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

.io_flush() is no longer called so drop qemu_laio_completion_cb().  It
turns out that count is now unused so drop that too.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

.io_flush() is no longer called so drop iscsi_process_flush().

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Since .io_flush() is no longer called we do not need
qemu_gluster_aio_flush_cb() anymore.  It turns out that qemu_aio_count
is unused now and can be dropped.

Thanks to Bharata B Rao <bharata@linux.vnet.ibm.com> for catching a
build failure with CONFIG_GLUSTERFS_DISCARD, which has been fixed.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

My IBM email address will be unaccessible after August 23rd, 2013.

Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>

.io_flush() is no longer called so drop curl_aio_flush().  The acb[]
array that the function checks is still used in other parts of
block/curl.c.  Therefore we cannot remove acb[], it is needed.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>